No functional change intended, just streamlines the abstract variable
lookup/construction to use a common entry point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210234 91177308-0d34-0410-b5e6-96231b3b80d8
Unused arguments were not being added to the argument list, but instead
treated as arbitrary scope variables. This meant they weren't carefully
added in the original argument order.
In this particular example, though, it turns out the argument is only
/mostly/ unused (well, actually it's entirely used, but in a specific
way). It's a struct that, due to ABI reasons, is decomposed into chunks
(exactly one chunk, since it has one member) and then passed. Since only
one of those chunks is used (SROA, etc, kill the original reconstitution
code) we don't have a location to describe the whole variable.
In this particular case, since the struct consists of just the one int,
once we have partial location information, this should have a location
that describes the entire variable (since the piece is the entirety of
the object).
And at some point we'll need to describe the location of even /entirely/
unused arguments so that they can at least be printed on function entry.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210231 91177308-0d34-0410-b5e6-96231b3b80d8
Abstract variables within abstract scopes that are entirely optimized
away in their first inlining are omitted because their scope is not
present so the variable is never created. Instead, we should ensure the
scope is created so the variable can be added, even if it's been
optimized away in its first inlining.
This fixes the incorrect debug info in missing-abstract-variable.ll
(added in r210143) and passes an asserts self-hosting build, so
hopefully there's not more of these issues left behind... *fingers
crossed*.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210221 91177308-0d34-0410-b5e6-96231b3b80d8
We would previously assert here when trying to figure out the section
for the global.
This makes us handle the situation more gracefully since the IR isn't
malformed.
Differential Revision: http://reviews.llvm.org/D4022
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210215 91177308-0d34-0410-b5e6-96231b3b80d8
When JITting a large project such as Boost it's quite hard to figure out the problematic inline asm without debug location. This patch provides debug location printout before the JIT aborts due to inline asm. printDebugLoc() was exposed from MachineInstr.cpp and reused here.
If the JIT run with debug info, don't bomb on DBG_VALUE but ignore them.
http://reviews.llvm.org/D3416
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210201 91177308-0d34-0410-b5e6-96231b3b80d8
Add support to llvm-readobj to decode Windows ARM Exception Handling data. This
uses the previously added datastructures to decode the information into a format
that can be used by tests. This is a necessary step to add support for emitting
Windows on ARM exception handling information.
A fair amount of formatting inspiration is drawn from the Win64 EH printer as
well as the ARM EHABI printer. This allows for a reasonably thorough look into
the encoded data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210192 91177308-0d34-0410-b5e6-96231b3b80d8
Add a helper print method to print a boolean value as "Yes" or "No". This is
intended to be used by the Windows ARM EH printer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210191 91177308-0d34-0410-b5e6-96231b3b80d8
This is purely a documentation/whitespace cleanup for the format support
functions.
The current style does not duplicate the function/class names in the
documentation; conform to this style.
Additionally, there was a large amount of duplication of comments that added no
real value. Use block comments for the related sets of functions which are used
for type deduction and parameter container classes.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210190 91177308-0d34-0410-b5e6-96231b3b80d8
Replicate the fact that ARM::WinEH::RuntimeFunction purposefully does not merge
functions to accommodate raw data access use cases in tools such as readobj.
Pointed out by Renato during post-commit review.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210189 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements two things:
1. If we know one number is positive and another is negative, we return true as
signed addition of two opposite signed numbers will never overflow.
2. Implemented TODO : If one of the operands only has one non-zero bit, and if
the other operand has a known-zero bit in a more significant place than it
(not including the sign bit) the ripple may go up to and fill the zero, but
won't change the sign. e.x - (x & ~4) + 1
We make sure that we are ignoring 0 at MSB.
Patch by Suyog Sarda.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210186 91177308-0d34-0410-b5e6-96231b3b80d8
As requested by AArch64 subtargets.
Note that this will have no effect until the
AArch64 target actually enables the pass like this:
substitutePass(&PostRASchedulerID, &PostMachineSchedulerID);
As soon as armv7 switches over, PostMachineScheduler will become the
default postRA scheduler, so this won't be necessary any more.
Targets using the old postRA schedule would then do:
substitutePass(&PostMachineSchedulerID, &PostRASchedulerID);
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210167 91177308-0d34-0410-b5e6-96231b3b80d8
These were not exposed previously because I didn't want out-of-tree
targets to be too dependent on their internals. They can be reused for
a very wide variety of processors with casual scheduling needs without
exposing the classes by instead using hooks defined in
MachineSchedPolicy (we can add more if needed). When targets are more
aggressively tuned or want to provide custom heuristics, they can
define their own MachineSchedStrategy. I tend to think this is better
once you start customizing heuristics because you can copy over only
what you need. I don't think that layering heuristics generally works
well.
However, Arch64 targets now want to reuse the Generic scheduling logic
but also provide extensions. I don't see much harm in exposing the
Generic scheduling classes with a major caveat: these scheduling
strategies may change in the future without validating performance on
less mainstream processors. If you want to be immune from changes,
just define your own MachineSchedStrategy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210166 91177308-0d34-0410-b5e6-96231b3b80d8
Late last year r191835 removed a largely unmaintained legacy PGO
infrastructure, but some of the docs were missed. Since these docs are
for things that don't actually exist anymore, they should be removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210165 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid changing behaviour for everyone who's used to the traditional ghostview
UI, especially since it knows how to stay in the foreground unlike xdg-open.
Amendment to r210147.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210148 91177308-0d34-0410-b5e6-96231b3b80d8
This runs a suitable viewer on Unix desktop environments specified by
Freedesktop.org (GNOME, KDE, Linux distributions etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210147 91177308-0d34-0410-b5e6-96231b3b80d8
Also correct the llvm-config.h header guard so it doesn't depend on 'CONFIG_H'
which is commonly defined in external projects and caused trouble for
embedders.
In future llvm/Config/llvm-config.h will be installed, but not
the private llvm/Config/config.h header.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210144 91177308-0d34-0410-b5e6-96231b3b80d8
Along with a test case to demonstrate that due to inlining order there
are cases where abstract variable DIEs are not constructed since the
abstract subprogram was built due to a previous inlining that optimized
away those variables. This produces incorrect debug info (the 'missing'
abstract variable causes the inlined instance of that variable to be
emitted with a full description (name, line, file) rather than
referencing the abstract origin), but this commit at least ensures that
it doesn't crash...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210143 91177308-0d34-0410-b5e6-96231b3b80d8
This gets us closer to being able to remove LiveVariables entirely which is where dead instructions are currently tagged as such.
Reviewed by Jakob Olesen
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210132 91177308-0d34-0410-b5e6-96231b3b80d8
The tests check that the following transform happens:
(ldr|str) X, [x20]
...
sub x20, x20, #16
->
(ldr|str) X, [x20], #-16
with X being either w0, x0, s0, d0 or q0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210113 91177308-0d34-0410-b5e6-96231b3b80d8
