Commit Graph

23 Commits

Author SHA1 Message Date
Akira Hatanaka
243702b95a [mips] Fix definition of mfhi and mflo instructions to read from the whole
accumulator instead of its sub-registers, $hi and $lo. 

We need this change to prevent a mflo following a mtlo from reading an
unpredictable/undefined value, as shown in the following example:

mult $6, $7 // result of $6 * $7 is written to $lo and $hi.
mflo $2     // read lower 32-bit result from $lo.
mtlo $4     // write to $lo. the content of $hi becomes unpredictable.
mfhi $3     // read higher 32-bit from $hi, which has an unpredictable value.

I don't have a test case for this change that reliably reproduces the problem.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192119 91177308-0d34-0410-b5e6-96231b3b80d8
2013-10-07 18:49:46 +00:00
Akira Hatanaka
3531db14c6 [mips] Define register class FGRH32 for the high half of the 64-bit floating
point registers. We will need this register class later when we add
definitions for instructions mfhc1 and mthc1. Also, remove sub-register indices
sub_fpeven and sub_fpodd and use sub_lo and sub_hi instead.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188842 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-20 22:58:56 +00:00
Akira Hatanaka
a98a486ad1 [mips] Resolve register classes dynamically using ptr_rc to reduce the number of
load/store instructions defined. Previously, we were defining load/store
instructions for each pointer size (32 and 64-bit), but now we need just one
definition.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188830 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-20 21:08:22 +00:00
Akira Hatanaka
491d04969d [mips] Rename accumulator register classes and FP register operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188020 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-08 21:54:26 +00:00
Akira Hatanaka
1858786285 [mips] Rename register classes CPURegs and CPU64Regs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187832 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-06 23:08:38 +00:00
Bill Wendling
99cb622041 Use pointers to the MCAsmInfo and MCRegInfo.
Someone may want to do something crazy, like replace these objects if they
change or something.

No functionality change intended.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184175 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-18 07:20:20 +00:00
Bill Wendling
41e632d9e1 Don't cache the instruction and register info from the TargetMachine, because
the internals of TargetMachine could change.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183493 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-07 07:04:14 +00:00
Rafael Espindola
6b67ffd68b Remove addFrameMove.
Now that we have good testing, remove addFrameMove and create cfi
instructions directly.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182052 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-16 21:02:15 +00:00
Rafael Espindola
d84ccfaf50 Change getFrameMoves to return a const reference.
To add a frame now there is a dedicated addFrameMove which also takes
care of constructing the move itself.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181657 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-11 02:38:11 +00:00
Akira Hatanaka
99ad6ac65e [mips] Handle reading, writing or copying of ccond field of DSP control
register.

- Define pseudo instructions which store or load ccond field of the DSP
  control register.
- Emit the pseudos in MipsSEInstrInfo::storeRegToStack and loadRegFromStack.
- Expand the pseudos before callee-scan save.
- Emit instructions RDDSP or WRDSP to copy between ccond field and GPRs. 


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180969 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-02 23:07:05 +00:00
Akira Hatanaka
f9a5e7e4e9 [mips] Rename class and functions. Simplify code.
No functionality changes.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180897 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-01 23:41:31 +00:00
Akira Hatanaka
c147c1b994 [mips] Fix handling of instructions which copy to/from accumulator registers.
Expand copy instructions between two accumulator registers before callee-saved
scan is done. Handle copies between integer GPR and hi/lo registers in
MipsSEInstrInfo::copyPhysReg. Delete pseudo-copy instructions that are not
needed.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180827 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-30 23:22:09 +00:00
Akira Hatanaka
d6a77822a9 [mips] Expand pseudo load, store and copy instructions right before
callee-saved scan.

The code makes use of register's scavenger's capability to spill multiple
registers.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178391 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-30 01:04:11 +00:00
Hal Finkel
dc3beb9017 Allow the register scavenger to spill multiple registers
This patch lets the register scavenger make use of multiple spill slots in
order to guarantee that it will be able to provide multiple registers
simultaneously.

To support this, the RS's API has changed slightly: setScavengingFrameIndex /
getScavengingFrameIndex have been replaced by addScavengingFrameIndex /
isScavengingFrameIndex / getScavengingFrameIndices.

In forthcoming commits, the PowerPC backend will use this capability in order
to implement the spilling of condition registers, and some special-purpose
registers, without relying on r0 being reserved. In some cases, spilling these
registers requires two GPRs: one for addressing and one to hold the value being
transferred.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177774 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-22 23:32:27 +00:00
Eli Bendersky
700ed80d3d Move the eliminateCallFramePseudoInstr method from TargetRegisterInfo
to TargetFrameLowering, where it belongs. Incidentally, this allows us
to delete some duplicated (and slightly different!) code in TRI.

There are potentially other layering problems that can be cleaned up
as a result, or in a similar manner.

The refactoring was OK'd by Anton Korobeynikov on llvmdev.

Note: this touches the target interfaces, so out-of-tree targets may
be affected.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175788 91177308-0d34-0410-b5e6-96231b3b80d8
2013-02-21 20:05:00 +00:00
Akira Hatanaka
544cc21cf4 [mips] Lower EH_RETURN.
Patch by Sasa Stankovic.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173862 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-30 00:26:49 +00:00
Chandler Carruth
0b8c9a80f2 Move all of the header files which are involved in modelling the LLVM IR
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.

There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.

The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.

I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).

I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-02 11:36:10 +00:00
Chandler Carruth
d04a8d4b33 Use the new script to sort the includes of every file under lib.
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.

Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169131 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-03 16:50:05 +00:00
Akira Hatanaka
11a45c214c [mips] Stop reserving register AT and use register scavenger when a scratch
register is needed.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167341 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-03 00:05:43 +00:00
Micah Villmow
3574eca1b0 Move TargetData to DataLayout.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165402 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-08 16:38:25 +00:00
Akira Hatanaka
af26626067 Move the code that creates instances of MipsInstrInfo and MipsFrameLowering out
of MipsTargetMachine.cpp.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161191 91177308-0d34-0410-b5e6-96231b3b80d8
2012-08-02 18:21:47 +00:00
Akira Hatanaka
71746220d3 Implement MipsSERegisterInfo::eliminateCallFramePseudoInstr. The function emits
instructions that decrement and increment the stack pointer before and after a
call when the function does not have a reserved call frame.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161093 91177308-0d34-0410-b5e6-96231b3b80d8
2012-07-31 23:52:55 +00:00
Akira Hatanaka
cdb3ba71ce Add definitions of two subclasses of MipsFrameLowering, Mips16FrameLowering and
MipsSEFrameLowering.

Implement MipsSEFrameLowering::hasReservedCallFrame. Call frames will not be
reserved if there is a call with a large call frame or there are variable sized
objects on the stack.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161090 91177308-0d34-0410-b5e6-96231b3b80d8
2012-07-31 22:50:19 +00:00