All SCEV expressions used by LSR formulae must be safe to
expand. i.e. they may not contain UDiv unless we can prove nonzero
denominator.
Fixes PR11356: LSR hoists UDiv.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160205 91177308-0d34-0410-b5e6-96231b3b80d8
This was always part of the VMCore library out of necessity -- it deals
entirely in the IR. The .cpp file in fact was already part of the VMCore
library. This is just a mechanical move.
I've tried to go through and re-apply the coding standard's preferred
header sort, but at 40-ish files, I may have gotten some wrong. Please
let me know if so.
I'll be committing the corresponding updates to Clang and Polly, and
Duncan has DragonEgg.
Thanks to Bill and Eric for giving the green light for this bit of cleanup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159421 91177308-0d34-0410-b5e6-96231b3b80d8
LSR has gradually been improved to more aggressively reuse existing code, particularly existing phi cycles. This exposed problems with the SCEVExpander's sloppy treatment of its insertion point. I applied some rigor to the insertion point problem that will hopefully avoid an endless bug cycle in this area. Changes:
- Always used properlyDominates to check safe code hoisting.
- The insertion point provided to SCEV is now considered a lower bound. This is usually a block terminator or the use itself. Under no cirumstance may SCEVExpander insert below this point.
- LSR is reponsible for finding a "canonical" insertion point across expansion of different expressions.
- Robust logic to determine whether IV increments are in "expanded" form and/or can be safely hoisted above some insertion point.
Fixes PR11783: SCEVExpander assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148535 91177308-0d34-0410-b5e6-96231b3b80d8
These heuristics are sufficient for enabling IV chains by
default. Performance analysis has been done for i386, x86_64, and
thumbv7. The optimization is rarely important, but can significantly
speed up certain cases by eliminating spill code within the
loop. Unrolled loops are prime candidates for IV chains. In many
cases, the final code could still be improved with more target
specific optimization following LSR. The goal of this feature is for
LSR to make the best choice of induction variables.
Instruction selection may not completely take advantage of this
feature yet. As a result, there could be cases of slight code size
increase.
Code size can be worse on x86 because it doesn't support postincrement
addressing. In fact, when chains are formed, you may see redundant
address plus stride addition in the addressing mode. GenerateIVChains
tries to compensate for the common cases.
On ARM, code size increase can be mitigated by using postincrement
addressing, but downstream codegen currently misses some opportunities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147826 91177308-0d34-0410-b5e6-96231b3b80d8
Just because we're dealing with a GEP doesn't mean we can assert the
SCEV has a pointer type. The fix is simply to ignore the SCEV pointer
type, which we really didn't need.
Fixes PR11138 webkit crash.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142058 91177308-0d34-0410-b5e6-96231b3b80d8
IVs.
Indvars previously chose randomly between congruent IVs. Now it will
bias the decision toward IVs that SCEVExpander likes to create. This
was not done to fix any problem, it's just a welcome side effect of
factoring code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141633 91177308-0d34-0410-b5e6-96231b3b80d8
related bug fixes and corresponding assertions for uninitialized data
and missing NULL check. Test cases will be included with the new LFTR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135333 91177308-0d34-0410-b5e6-96231b3b80d8
that the values they refer to aren't being deleted underneath them.
Make sure these containters get cleared by clear(), which IndVarSimplify
and LSR both use before deleting instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109478 91177308-0d34-0410-b5e6-96231b3b80d8
there could be multiple subexpressions within a single expansion which
require insert point adjustment. This fixes PR7306.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105510 91177308-0d34-0410-b5e6-96231b3b80d8
explicitly split into stride-and-offset pairs. Also, add the
ability to track multiple post-increment loops on the same expression.
This refines the concept of "normalizing" SCEV expressions used for
to post-increment uses, and introduces a dedicated utility routine for
normalizing and denormalizing expressions.
This fixes the expansion of expressions which are post-increment users
of more than one loop at a time. More broadly, this takes LSR another
step closer to being able to reason about more than one loop at a time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100699 91177308-0d34-0410-b5e6-96231b3b80d8
so that the SCEVExpander doesn't retain a dangling pointer as its
insert position. The dangling pointer in this case wasn't ever used
to insert new instructions, but it was causing trouble with
SCEVExpander's code for automatically advancing its insert position
past debug intrinsics.
This fixes use-after-free errors that valgrind noticed in
test/Transforms/IndVarSimplify/2007-06-06-DeleteDanglesPtr.ll and
test/Transforms/IndVarSimplify/exit_value_tests.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99036 91177308-0d34-0410-b5e6-96231b3b80d8
use-before-def errors in SCEVExpander-produced code in sqlite3 when debug
info with optimization is enabled, though the testcases for this are
dependent on use-list order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99001 91177308-0d34-0410-b5e6-96231b3b80d8
insert location has become an "inserted" instruction since the time
it was saved. If so, advance to the first non-"inserted" instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96203 91177308-0d34-0410-b5e6-96231b3b80d8
current insertion point, advance the current insertion point.
This avoids a use-before-def situation in a testcase extracted
from clang which is difficult to reduce to a reasonable-sized
regression test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96151 91177308-0d34-0410-b5e6-96231b3b80d8
bug fixes, and with improved heuristics for analyzing foreign-loop
addrecs.
This change also flattens IVUsers, eliminating the stride-oriented
groupings, which makes it easier to work with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95975 91177308-0d34-0410-b5e6-96231b3b80d8
use plain SCEVUnknowns with ConstantExpr::getSizeOf and
ConstantExpr::getOffsetOf constants. This eliminates a bunch of
special-case code.
Also add code for pattern-matching these expressions, for clients that
want to recognize them.
Move ScalarEvolution's logic for expanding array and vector sizeof
expressions into an element count times the element size, to expose
the multiplication to subsequent folding, into the regular constant
folder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94737 91177308-0d34-0410-b5e6-96231b3b80d8
This new version is much more aggressive about doing "full" reduction in
cases where it reduces register pressure, and also more aggressive about
rewriting induction variables to count down (or up) to zero when doing so
reduces register pressure.
It currently uses fairly simplistic algorithms for finding reuse
opportunities, but it introduces a new framework allows it to combine
multiple strategies at once to form hybrid solutions, instead of doing
all full-reduction or all base+index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94061 91177308-0d34-0410-b5e6-96231b3b80d8
TargetData is not present. It still uses TargetData when available.
This generalization also fixed some limitations in the TargetData
case; the attached testcase covers this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79344 91177308-0d34-0410-b5e6-96231b3b80d8
This helps it avoid reusing an instruction that doesn't dominate all
of the users, in cases where the original instruction was inserted
before all of the users were known. This may result in redundant
expansions of sub-expressions that depend on loop-unpredictable values
in some cases, however this isn't very common, and it primarily impacts
IndVarSimplify, so GVN can be expected to clean these up.
This eliminates the need for IndVarSimplify's FixUsesBeforeDefs,
which fixes several bugs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74352 91177308-0d34-0410-b5e6-96231b3b80d8
sending SCEVUnknowns to expandAddToGEP. This avoids the need for
expandAddToGEP to bend the rules and peek into SCEVUnknown
expressions.
Factor out the code for testing whether a SCEV can be factored by
a constant for use in a GEP index. This allows it to handle
SCEVAddRecExprs, by recursing.
As a result, SCEVExpander can now put more things in GEP indices,
so it emits fewer explicit mul instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72366 91177308-0d34-0410-b5e6-96231b3b80d8
Fix by clearing the rewriter cache before deleting the trivially dead
instructions.
Also make InsertedExpressions use an AssertingVH to catch these
bugs easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72364 91177308-0d34-0410-b5e6-96231b3b80d8
instructions. It attempts to create high-level multi-operand GEPs,
though in cases where this isn't possible it falls back to casting
the pointer to i8* and emitting a GEP with that. Using GEP instructions
instead of ptrtoint+arithmetic+inttoptr helps pointer analyses that
don't use ScalarEvolution, such as BasicAliasAnalysis.
Also, make the AddrModeMatcher more aggressive in handling GEPs.
Previously it assumed that operand 0 of a GEP would require a register
in almost all cases. It now does extra checking and can do more
matching if operand 0 of the GEP is foldable. This fixes a problem
that was exposed by SCEVExpander using GEPs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72093 91177308-0d34-0410-b5e6-96231b3b80d8
with the persistent insertion point, and change IndVars to make
use of it. This fixes a bug where IndVars was holding on to a
stale insertion point and forcing the SCEVExpander to continue to
use it.
This fixes PR4038.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69892 91177308-0d34-0410-b5e6-96231b3b80d8
