Fix by clearing the rewriter cache before deleting the trivially dead
instructions.
Also make InsertedExpressions use an AssertingVH to catch these
bugs easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72364 91177308-0d34-0410-b5e6-96231b3b80d8
assuming that the use of the value is in a block dominated by the
"normal" destination. LangRef.html and other documentation sources
don't explicitly guarantee this, but it seems to be assumed in
other places in LLVM at least.
This fixes an assertion failure on the included testcase, which
is derived from the Ada testsuite.
FixUsesBeforeDefs is a temporary measure which I'm looking to
replace with a more capable solution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72266 91177308-0d34-0410-b5e6-96231b3b80d8
instructions. It attempts to create high-level multi-operand GEPs,
though in cases where this isn't possible it falls back to casting
the pointer to i8* and emitting a GEP with that. Using GEP instructions
instead of ptrtoint+arithmetic+inttoptr helps pointer analyses that
don't use ScalarEvolution, such as BasicAliasAnalysis.
Also, make the AddrModeMatcher more aggressive in handling GEPs.
Previously it assumed that operand 0 of a GEP would require a register
in almost all cases. It now does extra checking and can do more
matching if operand 0 of the GEP is foldable. This fixes a problem
that was exposed by SCEVExpander using GEPs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72093 91177308-0d34-0410-b5e6-96231b3b80d8
and generalize it so that it can be used by IndVarSimplify. Implement the
base IndVarSimplify transformation code using IVUsers. This removes
TestOrigIVForWrap and associated code, as ScalarEvolution now has enough
builtin overflow detection and folding logic to handle all the same cases,
and more. Run "opt -iv-users -analyze -disable-output" on your favorite
loop for an example of what IVUsers does.
This lets IndVarSimplify eliminate IV casts and compute trip counts in
more cases. Also, this happens to finally fix the remaining testcases
in PR1301.
Now that IndVarSimplify is being more aggressive, it occasionally runs
into the problem where ScalarEvolutionExpander's code for avoiding
duplicate expansions makes it difficult to ensure that all expanded
instructions dominate all the instructions that will use them. As a
temporary measure, IndVarSimplify now uses a FixUsesBeforeDefs function
to fix up instructions inserted by SCEVExpander. Fortunately, this code
is contained, and can be easily removed once a more comprehensive
solution is available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71535 91177308-0d34-0410-b5e6-96231b3b80d8
CallbackVH, with fixes. allUsesReplacedWith need to
walk the def-use chains and invalidate all users of a
value that is replaced. SCEVs of users need to be
recalcualted even if the new value is equivalent. Also,
make forgetLoopPHIs walk def-use chains, since any
SCEV that depends on a PHI should be recalculated when
more information about that PHI becomes available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70927 91177308-0d34-0410-b5e6-96231b3b80d8
makes ScalarEvolution::deleteValueFromRecords, and it's code that
subtly needed to be called before ReplaceAllUsesWith, unnecessary.
It also makes ValueDeletionListener unnecessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70645 91177308-0d34-0410-b5e6-96231b3b80d8
with the persistent insertion point, and change IndVars to make
use of it. This fixes a bug where IndVars was holding on to a
stale insertion point and forcing the SCEVExpander to continue to
use it.
This fixes PR4038.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69892 91177308-0d34-0410-b5e6-96231b3b80d8
have pointer types, though in contrast to C pointer types, SCEV
addition is never implicitly scaled. This not only eliminates the
need for special code like IndVars' EliminatePointerRecurrence
and LSR's own GEP expansion code, it also does a better job because
it lets the normal optimizations handle pointer expressions just
like integer expressions.
Also, since LLVM IR GEPs can't directly index into multi-dimensional
VLAs, moving the GEP analysis out of client code and into the SCEV
framework makes it easier for clients to handle multi-dimensional
VLAs the same way as other arrays.
Some existing regression tests show improved optimization.
test/CodeGen/ARM/2007-03-13-InstrSched.ll in particular improved to
the point where if-conversion started kicking in; I turned it off
for this test to preserve the intent of the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69258 91177308-0d34-0410-b5e6-96231b3b80d8
and sext over (iv | const), if a longer iv is
available. Allow expressions to have more than
one zext/sext parent. All from OpenSSL.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69241 91177308-0d34-0410-b5e6-96231b3b80d8
sext around sext(shorter IV + constant), using a
longer IV instead, when it can figure out the
add can't overflow. This comes up a lot in
subscripting; mainly affects 64 bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69123 91177308-0d34-0410-b5e6-96231b3b80d8
to more accurately describe what it does. Expand its doxygen comment
to describe what the backedge-taken count is and how it differs
from the actual iteration count of the loop. Adjust names and
comments in associated code accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65382 91177308-0d34-0410-b5e6-96231b3b80d8
trip counts that use signed comparisons. It's not obviously the best
approach for preserving trip count information, and at any rate there
isn't anything in the tree right now that makes use of that, so for
now always using zero-extensions is preferable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65347 91177308-0d34-0410-b5e6-96231b3b80d8
-std-compile-opts sequence, this avoids the need for ScalarEvolution to
be rerun before LoopDeletion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65318 91177308-0d34-0410-b5e6-96231b3b80d8
trip count value when the original loop iteration condition is
signed and the canonical induction variable won't undergo signed
overflow. This isn't required for correctness; it just preserves
more information about original loop iteration values.
Add a getTruncateOrSignExtend method to ScalarEvolution,
following getTruncateOrZeroExtend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64918 91177308-0d34-0410-b5e6-96231b3b80d8
are multiple IV's in a loop, some of them may under go signed
or unsigned wrapping even if the IV that's used in the loop
exit condition doesn't. Restrict sign-extension-elimination
and zero-extension-elimination to only those that operate on
the original loop-controlling IV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64866 91177308-0d34-0410-b5e6-96231b3b80d8
modified in a way that may effect the trip count calculation. Change
IndVars to use this method when it rewrites pointer or floating-point
induction variables instead of using a doInitialization method to
sneak these changes in before ScalarEvolution has a chance to see
the loop. This eliminates the need for LoopPass to depend on
ScalarEvolution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64810 91177308-0d34-0410-b5e6-96231b3b80d8
- Test for signed and unsigned wrapping conditions, instead of just
testing for non-negative induction ranges.
- Handle loops with GT comparisons, in addition to LT comparisons.
- Support more cases of induction variables that don't start at 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64532 91177308-0d34-0410-b5e6-96231b3b80d8
loop induction on LP64 targets. When the induction variable is
used in addressing, IndVars now is usually able to inserst a
64-bit induction variable and eliminates the sign-extending cast.
This is also useful for code using C "short" types for
induction variables on targets with 32-bit addressing.
Inserting a wider induction variable is easy; the tricky part is
determining when trunc(sext(i)) expressions are no-ops. This
requires range analysis of the loop trip count. A common case is
when the original loop iteration starts at 0 and exits when the
induction variable is signed-less-than a fixed value; this case
is now handled.
This replaces IndVarSimplify's OptimizeCanonicalIVType. It was
doing the same optimization, but it was limited to loops with
constant trip counts, because it was running after the loop
rewrite, and the information about the original induction
variable is lost by that point.
Rename ScalarEvolution's executesAtLeastOnce to
isLoopGuardedByCond, generalize it to be able to test for
ICMP_NE conditions, and move it to be a public function so that
IndVars can use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64407 91177308-0d34-0410-b5e6-96231b3b80d8
This allows SCEV users to effectively calculate trip count.
LSR later on transforms back integer IVs to floating point IVs
later on to avoid int-to-float casts inside the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58625 91177308-0d34-0410-b5e6-96231b3b80d8
LoopPass*.
- Although less precise, this means they can be used in clients
without RTTI (who would otherwise need to include LoopPass.h, which
eventually includes things using dynamic_cast). This was the
simplest solution that presented itself, but I am happy to use a
better one if available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58010 91177308-0d34-0410-b5e6-96231b3b80d8
