Various tests had sprung up over the years which had --check-prefix=ABC on the
RUN line, but "CHECK-ABC:" later on. This happened to work before, but was
strictly incorrect. FileCheck is getting stricter soon though.
Patch by Ron Ofir.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188173 91177308-0d34-0410-b5e6-96231b3b80d8
If the tail-callee and caller give the same bits via the same signext/zeroext
attribute then a tail-call should be allowed, since the extension has already
been done by the callee.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188159 91177308-0d34-0410-b5e6-96231b3b80d8
This patch decouples the stack protector pass so that we can support stack
protector implementations that do not use the IR level generated stack protector
fail basic block.
No codesize increase is caused by this change since the MI level tail merge pass
properly merges together the fail condition blocks (see the updated test).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188105 91177308-0d34-0410-b5e6-96231b3b80d8
For most libm ISD nodes, TargetLoweringBase::initActions sets the default
scalar-type action to Expand, and leaves the vector-type action default as
Legal. This is not appropriate for the new ISD::FROUND node (which no backend
but PowerPC handles explicitly).
Fixes PR16842.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188048 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message:
Stop emitting weak symbols into the "coal" sections.
The Mach-O linker has been able to support the weak-def bit on any symbol for
quite a while now. The compiler however continued to place these symbols into a
"coal" section, which required the linker to map them back to the base section
name.
Replace the sections like this:
__TEXT/__textcoal_nt instead use __TEXT/__text
__TEXT/__const_coal instead use __TEXT/__const
__DATA/__datacoal_nt instead use __DATA/__data
<rdar://problem/14265330>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187939 91177308-0d34-0410-b5e6-96231b3b80d8
Also remove checking of llvm.dbg.sp since it is not used in generating dwarf.
Current state of Finder:
DebugInfoFinder tries to list all debug info MDNodes used in a module. To
list debug info MDNodes used by an instruction, DebugInfoFinder provides
processDeclare, processValue and processLocation to handle DbgDeclareInst,
DbgValueInst and DbgLoc attached to instructions. processModule will go
through all DICompileUnits in llvm.dbg.cu and list debug info MDNodes
used by the CUs.
TODO:
1> Finder has a list of CUs, SPs, Types, Scopes and global variables. We
need to add a list of variables that are used by DbgDeclareInst and
DbgValueInst.
2> MDString fields should be null or isa<MDString> and MDNode fields should be
null or isa<MDNode>. We currently use empty string or int 0 to represent null.
3> Go though Verify functions and make sure that they check field types.
4> Clean up existing testing cases to remove llvm.dbg.sp and make sure each
testing case has a llvm.dbg.cu.
Re-apply r187609 with fix to pass ocaml binding. vmcore.ml generates a debug
location with scope being metadata !{}, in verifier we treat this as a null
scope.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187812 91177308-0d34-0410-b5e6-96231b3b80d8
This change came about primarily because of two issues in the existing code.
Niether of:
define i64 @test1(i64 %val) {
%in = trunc i64 %val to i32
tail call i32 @ret32(i32 returned %in)
ret i64 %val
}
define i64 @test2(i64 %val) {
tail call i32 @ret32(i32 returned undef)
ret i32 42
}
should be tail calls, and the function sameNoopInput is responsible. The main
problem is that it is completely symmetric in the "tail call" and "ret" value,
but in reality different things are allowed on each side.
For these cases:
1. Any truncation should lead to a larger value being generated by "tail call"
than needed by "ret".
2. Undef should only be allowed as a source for ret, not as a result of the
call.
Along the way I noticed that a mismatch between what this function treats as a
valid truncation and what the backends see can lead to invalid calls as well
(see x86-32 test case).
This patch refactors the code so that instead of being based primarily on
values which it recurses into when necessary, it starts by inspecting the type
and considers each fundamental slot that the backend will see in turn. For
example, given a pathological function that returned {{}, {{}, i32, {}}, i32}
we would consider each "real" i32 in turn, and ask if it passes through
unchanged. This is much closer to what the backend sees as a result of
ComputeValueVTs.
Aside from the bug fixes, this eliminates the recursion that's going on and, I
believe, makes the bulk of the code significantly easier to understand. The
trade-off is the nasty iterators needed to find the real types inside a
returned value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187787 91177308-0d34-0410-b5e6-96231b3b80d8
Due to the weird and wondeful usual arithmetic conversions, some
calculations involving negative values were getting performed in
uint32_t and then promoted to int64_t, which is really not a good
idea.
Patch by Katsuhiro Ueno.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187703 91177308-0d34-0410-b5e6-96231b3b80d8
Function attributes are the future! So just query whether we want to realign the
stack directly from the function instead of through a random target options
structure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187618 91177308-0d34-0410-b5e6-96231b3b80d8
Also remove checking of llvm.dbg.sp since it is not used in generating dwarf.
Current state of Finder:
DebugInfoFinder tries to list all debug info MDNodes used in a module. To
list debug info MDNodes used by an instruction, DebugInfoFinder provides
processDeclare, processValue and processLocation to handle DbgDeclareInst,
DbgValueInst and DbgLoc attached to instructions. processModule will go
through all DICompileUnits in llvm.dbg.cu and list debug info MDNodes
used by the CUs.
TODO:
1> Finder has a list of CUs, SPs, Types, Scopes and global variables. We
need to add a list of variables that are used by DbgDeclareInst and
DbgValueInst.
2> MDString fields should be null or isa<MDString> and MDNode fields should be
null or isa<MDNode>. We currently use empty string or int 0 to represent null.
3> Go though Verify functions and make sure that they check field types.
4> Clean up existing testing cases to remove llvm.dbg.sp and make sure each
testing case has a llvm.dbg.cu.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187609 91177308-0d34-0410-b5e6-96231b3b80d8
All insertf*/extractf* functions replaced with insert/extract since we have insertf and inserti forms.
Added lowering for INSERT_VECTOR_ELT / EXTRACT_VECTOR_ELT for 512-bit vectors.
Added lowering for EXTRACT/INSERT subvector for 512-bit vectors.
Added a test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187491 91177308-0d34-0410-b5e6-96231b3b80d8
This patch prevents the following combine when the input vector is used more
than once.
insert_vector_elt (build_vector elt0, ..., eltN), NewEltIdx, idx
=>
build_vector elt0, ..., NewEltIdx, ..., eltN
The reasons are:
- Building a vector may be expensive, so try to reuse the existing part of a
vector instead of creating a new one (think big vectors).
- elt0 to eltN now have two users instead of one. This may prevent some other
optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187396 91177308-0d34-0410-b5e6-96231b3b80d8
Also always add DIType, DISubprogram and DIGlobalVariable to the list
in DebugInfoFinder without checking them, so we can verify them later
on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187285 91177308-0d34-0410-b5e6-96231b3b80d8
We used to call Verify before adding DICompileUnit to the list, and now we
remove the check and always add DICompileUnit to the list in DebugInfoFinder,
so we can verify them later on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187237 91177308-0d34-0410-b5e6-96231b3b80d8
CustomLowerNode was not being called during SplitVectorOperand,
meaning custom legalization could not be used by targets.
This also adds a test case for NVPTX that depends on this custom
legalization.
Differential Revision: http://llvm-reviews.chandlerc.com/D1195
Attempt to fix the buildbots by making the X86 test I just added platform independent
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187202 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 187198. It broke the bots.
The soft float test probably needs a -triple because of name differences.
On the hard float test I am getting a "roundss $1, %xmm0, %xmm0", instead of
"vroundss $1, %xmm0, %xmm0, %xmm0".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187201 91177308-0d34-0410-b5e6-96231b3b80d8
CustomLowerNode was not being called during SplitVectorOperand,
meaning custom legalization could not be used by targets.
This also adds a test case for NVPTX that depends on this custom
legalization.
Differential Revision: http://llvm-reviews.chandlerc.com/D1195
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187198 91177308-0d34-0410-b5e6-96231b3b80d8
The previous change to local live range allocation also suppressed
eviction of local ranges. In rare cases, this could result in more
expensive register choices. This commit actually revives a feature
that I added long ago: check if live ranges can be reassigned before
eviction. But now it only happens in rare cases of evicting a local
live range because another local live range wants a cheaper register.
The benefit is improved code size for some benchmarks on x86 and armv7.
I measured no significant compile time increase and performance
changes are noise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187140 91177308-0d34-0410-b5e6-96231b3b80d8
Also avoid locals evicting locals just because they want a cheaper register.
Problem: MI Sched knows exactly how many registers we have and assumes
they can be colored. In cases where we have large blocks, usually from
unrolled loops, greedy coloring fails. This is a source of
"regressions" from the MI Scheduler on x86. I noticed this issue on
x86 where we have long chains of two-address defs in the same live
range. It's easy to see this in matrix multiplication benchmarks like
IRSmk and even the unit test misched-matmul.ll.
A fundamental difference between the LLVM register allocator and
conventional graph coloring is that in our model a live range can't
discover its neighbors, it can only verify its neighbors. That's why
we initially went for greedy coloring and added eviction to deal with
the hard cases. However, for singly defined and two-address live
ranges, we can optimally color without visiting neighbors simply by
processing the live ranges in instruction order.
Other beneficial side effects:
It is much easier to understand and debug regalloc for large blocks
when the live ranges are allocated in order. Yes, global allocation is
still very confusing, but it's nice to be able to comprehend what
happened locally.
Heuristics could be added to bias register assignment based on
instruction locality (think late register pairing, banks...).
Intuituvely this will make some test cases that are on the threshold
of register pressure more stable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187139 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure the context and type fields are MDNodes. We will generate
verification errors if those fields are non-empty strings.
Fix testing cases to make them pass the verifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187106 91177308-0d34-0410-b5e6-96231b3b80d8
There's no need to specify a flag to omit frame pointer elimination on non-leaf
nodes...(Honestly, I can't parse that option out.) Use the function attribute
stuff instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187093 91177308-0d34-0410-b5e6-96231b3b80d8
Improve the Finder to handle context of a DIVariable used by DbgValueInst.
Fix testing cases to make them pass the verifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187052 91177308-0d34-0410-b5e6-96231b3b80d8
Improve the Finder to handle context of a DIVariable.
If Scope is a DICompileUnit, add it to the list of CUs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187003 91177308-0d34-0410-b5e6-96231b3b80d8
MDNodes used by DbgDeclareInst and DbgValueInst.
Another 16 testing cases failed and they are disabled with
-disable-debug-info-verifier.
A total of 34 cases are disabled with -disable-debug-info-verifier and will be
corrected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186902 91177308-0d34-0410-b5e6-96231b3b80d8
We were incorrectly using compiler_used instead of compiler.used. Unfortunately
the passes using the broken name had tests also using the broken name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186705 91177308-0d34-0410-b5e6-96231b3b80d8
1> Use DebugInfoFinder to find debug info MDNodes.
2> Add disable-debug-info-verifier to disable verifying debug info.
3> Disable verifying for testing cases that fail (will update the testing cases
later on).
4> MDNodes generated by clang can have empty filename for TAG_inheritance and
TAG_friend, so DIType::Verify is modified accordingly.
Note that DebugInfoFinder does not list all debug info MDNode.
For example, clang can generate:
metadata !{i32 786468}, which will fail to verify.
This MDNode is used by debug info but not included in DebugInfoFinder.
This MDNode is generated as a temporary node in DIBuilder::createFunction
Value *TElts[] = { GetTagConstant(VMContext, DW_TAG_base_type) };
MDNode::getTemporary(VMContext, TElts)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186634 91177308-0d34-0410-b5e6-96231b3b80d8
All changes were made by the following bash script:
find test/CodeGen -name "*.ll" | \
while read NAME; do
echo "$NAME"
grep -q "^; *RUN: *llc.*debug" $NAME && continue
grep -q "^; *RUN:.*llvm-objdump" $NAME && continue
grep -q "^; *RUN: *opt.*" $NAME && continue
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\([A-Za-z0-9_-]*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC[:]* *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
done
sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
mv $TEMP $NAME
done
This script catches a superset of the cases caught by the script associated with commit r186280. It initially found some false positives due to unusual constructs in a minority of tests; all such cases were disambiguated first in commit r186621.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186624 91177308-0d34-0410-b5e6-96231b3b80d8
