pointed to by a dbg_value belonging to a function argument is eliminated
during instruction selection.
rdar://problem/15094721.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192011 91177308-0d34-0410-b5e6-96231b3b80d8
Sometimes a copy from a vreg -> vreg sneaks into the middle of a terminator
sequence. It is safe to slice this into the stack protector success bb.
This fixes PR16979.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191260 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the DAGISel function WalkChainUsers was spotting that it
had entered already-selected territory by whether a node was a
MachineNode (amongst other things). Since it's fairly common practice
to insert MachineNodes during ISelLowering, this was not the correct
check.
Looking around, it seems that other nodes get their NodeId set to -1
upon selection, so this makes sure the same thing happens to all
MachineNodes and uses that characteristic to determine whether we
should stop looking for a loop during selection.
This should fix PR15840.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191165 91177308-0d34-0410-b5e6-96231b3b80d8
A DBG_VALUE is register-indirect iff the first operand is a register
_and_ the second operand is an immediate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190821 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, generation of stack protectors was done exclusively in the
pre-SelectionDAG Codegen LLVM IR Pass "Stack Protector". This necessitated
splitting basic blocks at the IR level to create the success/failure basic
blocks in the tail of the basic block in question. As a result of this,
calls that would have qualified for the sibling call optimization were no
longer eligible for optimization since said calls were no longer right in
the "tail position" (i.e. the immediate predecessor of a ReturnInst
instruction).
Then it was noticed that since the sibling call optimization causes the
callee to reuse the caller's stack, if we could delay the generation of
the stack protector check until later in CodeGen after the sibling call
decision was made, we get both the tail call optimization and the stack
protector check!
A few goals in solving this problem were:
1. Preserve the architecture independence of stack protector generation.
2. Preserve the normal IR level stack protector check for platforms like
OpenBSD for which we support platform specific stack protector
generation.
The main problem that guided the present solution is that one can not
solve this problem in an architecture independent manner at the IR level
only. This is because:
1. The decision on whether or not to perform a sibling call on certain
platforms (for instance i386) requires lower level information
related to available registers that can not be known at the IR level.
2. Even if the previous point were not true, the decision on whether to
perform a tail call is done in LowerCallTo in SelectionDAG which
occurs after the Stack Protector Pass. As a result, one would need to
put the relevant callinst into the stack protector check success
basic block (where the return inst is placed) and then move it back
later at SelectionDAG/MI time before the stack protector check if the
tail call optimization failed. The MI level option was nixed
immediately since it would require platform specific pattern
matching. The SelectionDAG level option was nixed because
SelectionDAG only processes one IR level basic block at a time
implying one could not create a DAG Combine to move the callinst.
To get around this problem a few things were realized:
1. While one can not handle multiple IR level basic blocks at the
SelectionDAG Level, one can generate multiple machine basic blocks
for one IR level basic block. This is how we handle bit tests and
switches.
2. At the MI level, tail calls are represented via a special return
MIInst called "tcreturn". Thus if we know the basic block in which we
wish to insert the stack protector check, we get the correct behavior
by always inserting the stack protector check right before the return
statement. This is a "magical transformation" since no matter where
the stack protector check intrinsic is, we always insert the stack
protector check code at the end of the BB.
Given the aforementioned constraints, the following solution was devised:
1. On platforms that do not support SelectionDAG stack protector check
generation, allow for the normal IR level stack protector check
generation to continue.
2. On platforms that do support SelectionDAG stack protector check
generation:
a. Use the IR level stack protector pass to decide if a stack
protector is required/which BB we insert the stack protector check
in by reusing the logic already therein. If we wish to generate a
stack protector check in a basic block, we place a special IR
intrinsic called llvm.stackprotectorcheck right before the BB's
returninst or if there is a callinst that could potentially be
sibling call optimized, before the call inst.
b. Then when a BB with said intrinsic is processed, we codegen the BB
normally via SelectBasicBlock. In said process, when we visit the
stack protector check, we do not actually emit anything into the
BB. Instead, we just initialize the stack protector descriptor
class (which involves stashing information/creating the success
mbbb and the failure mbb if we have not created one for this
function yet) and export the guard variable that we are going to
compare.
c. After we finish selecting the basic block, in FinishBasicBlock if
the StackProtectorDescriptor attached to the SelectionDAGBuilder is
initialized, we first find a splice point in the parent basic block
before the terminator and then splice the terminator of said basic
block into the success basic block. Then we code-gen a new tail for
the parent basic block consisting of the two loads, the comparison,
and finally two branches to the success/failure basic blocks. We
conclude by code-gening the failure basic block if we have not
code-gened it already (all stack protector checks we generate in
the same function, use the same failure basic block).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188755 91177308-0d34-0410-b5e6-96231b3b80d8
Teach the generic instruction selection helper functions to constrain
the register classes of their input operands. For non-physical register
references, the generic code needs to be careful not to mess that up
when replacing references to result registers. As the comment indicates
for MachineRegisterInfo::replaceRegWith(), it's important to call
constrainRegClass() first.
rdar://12594152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188593 91177308-0d34-0410-b5e6-96231b3b80d8
Adds unit tests for it too.
Split BasicBlockUtils into an analysis-half and a transforms-half, and put the
analysis bits into a new Analysis/CFG.{h,cpp}. Promote isPotentiallyReachable
into llvm::isPotentiallyReachable and move it into Analysis/CFG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187283 91177308-0d34-0410-b5e6-96231b3b80d8
Change the informal convention of DBG_VALUE machine instructions so that
we can express a register-indirect address with an offset of 0.
The old convention was that a DBG_VALUE is a register-indirect value if
the offset (operand 1) is nonzero. The new convention is that a DBG_VALUE
is register-indirect if the first operand is a register and the second
operand is an immediate. For plain register values the combination reg,
reg is used. MachineInstrBuilder::BuildMI knows how to build the new
DBG_VALUES.
rdar://problem/13658587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185966 91177308-0d34-0410-b5e6-96231b3b80d8
Stop using the ISD::EXCEPTIONADDR and ISD::EHSELECTION when lowering
landing pad arguments. These nodes were previously legalized into
CopyFromReg nodes, but that never worked properly because the
CopyFromReg node weren't guaranteed to be scheduled at the top of the
basic block.
This meant the exception pointer and selector registers could be
clobbered before being copied to a virtual register.
This patch copies the two physical registers to virtual registers at
the beginning of the basic block, and lowers the landingpad instruction
directly to two CopyFromReg nodes reading the *virtual* registers. This
is safe because virtual registers don't get clobbered.
A future patch will remove the ISD::EXCEPTIONADDR and ISD::EHSELECTION
nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185617 91177308-0d34-0410-b5e6-96231b3b80d8
Stop using the ISD::EXCEPTIONADDR and ISD::EHSELECTION when lowering
landing pad arguments. These nodes were previously legalized into
CopyFromReg nodes, but that never worked properly because the
CopyFromReg node weren't guaranteed to be scheduled at the top of the
basic block.
This meant the exception pointer and selector registers could be
clobbered before being copied to a virtual register.
This patch copies the two physical registers to virtual registers at
the beginning of the basic block, and lowers the landingpad instruction
directly to two CopyFromReg nodes reading the *virtual* registers. This
is safe because virtual registers don't get clobbered.
A future patch will remove the ISD::EXCEPTIONADDR and ISD::EHSELECTION
nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185595 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than using the full power of target-specific addressing modes in
DBG_VALUEs with Frame Indicies, simply use Frame Index + Offset. This
reduces the complexity of debug info handling down to two
representations of values (reg+offset and frame index+offset) rather
than three or four.
Ideally we could ensure that frame indicies had been eliminated by the
time we reached an assembly or dwarf generation, but I haven't spent the
time to figure out where the FIs are leaking through into that & whether
there's a good place to convert them. Some FI+offset=>reg+offset
conversion is done (see PrologEpilogInserter, for example) which is
necessary for some SelectionDAG assumptions about registers, I believe,
but it might be possible to make this a more thorough conversion &
ensure there are no remaining FIs no matter how instruction selection
is performed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184066 91177308-0d34-0410-b5e6-96231b3b80d8
The TargetLoweringInfo object is owned by the TargetMachine. In the future, the
TargetMachine object may change, which may also change the TargetLoweringInfo
object.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183356 91177308-0d34-0410-b5e6-96231b3b80d8
Change SelectionDAG::getXXXNode() interfaces as well as call sites of
these functions to pass in SDLoc instead of DebugLoc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182703 91177308-0d34-0410-b5e6-96231b3b80d8
register-indirect address with an offset of 0.
It used to be that a DBG_VALUE is a register-indirect value if the offset
(operand 1) is nonzero. The new convention is that a DBG_VALUE is
register-indirect if the first operand is a register and the second
operand is an immediate. For plain registers use the combination reg, reg.
rdar://problem/13658587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180816 91177308-0d34-0410-b5e6-96231b3b80d8
trying to move as much FastISel logic as possible out of the main path in
SelectionDAGISel - intermixing them just adds confusion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179902 91177308-0d34-0410-b5e6-96231b3b80d8
A node's ordering is only propagated during legalization if (a) the new node does
not have an ordering (is not a CSE'd node), or (b) the new node has an ordering
that is higher than the node being legalized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177465 91177308-0d34-0410-b5e6-96231b3b80d8
This doesn't reset all of the target options within the TargetOptions
object. This is because some of those are ABI-specific and must be determined if
it's okay to change those on the fly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176986 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176733 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAGIsel::LowerArguments needs a function, not a basic block. So it
makes sense to pass it the function instead of extracting a basic-block from
the function and then tossing it. This is also more self-documenting (functions
have arguments, BBs don't).
In addition, added comments to a couple of Select* methods.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176305 91177308-0d34-0410-b5e6-96231b3b80d8
This patch disables the counters on non-debug builds. This reduces the runtime of SelectionDAGISel::SelectCodeCommon by ~5%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176214 91177308-0d34-0410-b5e6-96231b3b80d8
fewer scalar integer (i32 or i64) arguments. It completely eliminates the need
for SDISel for trivial functions.
Also, add the new llc -fast-isel-abort-args option, which is similar to
-fast-isel-abort option, but for formal argument lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176052 91177308-0d34-0410-b5e6-96231b3b80d8
If the frame pointer is omitted, and any stack changes occur in the inline
assembly, e.g.: "pusha", then any C local variable or C argument references
will be incorrect.
I pass no judgement on anyone who would do such a thing. ;)
rdar://13218191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175334 91177308-0d34-0410-b5e6-96231b3b80d8
