is greater than the range of building selection dag node types, and
getTargetOpcode(), which returns the node opcode less the value of
isd::builtin_op_end, which specifies the end of the builtin types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22844 91177308-0d34-0410-b5e6-96231b3b80d8
used to tack a register number onto the node.
Instead of doing this, make a new node, RegisterSDNode, which is a leaf
containing a register number. These three operations just become normal
DAG nodes now, instead of requiring special handling.
Note that with this change, it is no longer correct to make illegal
CopyFromReg/CopyToReg nodes. The legalizer will not touch them, and this
is bad, so don't do it. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22806 91177308-0d34-0410-b5e6-96231b3b80d8
out into SimplifySelectCC. This allows both ISD::SELECT and ISD::SELECT_CC
to use the same set of simplifying folds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22779 91177308-0d34-0410-b5e6-96231b3b80d8
1. move assertions for node creation to getNode()
2. legalize the values returned in ExpandOp immediately
3. Move select_cc optimizations from SELECT's getNode() to SELECT_CC's,
allowing them to be cleaned up significantly.
This paves the way to pick up additional optimizations on SELECT_CC, such
as sum-of-absolute-differences.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22757 91177308-0d34-0410-b5e6-96231b3b80d8
CC out of the SetCC operation, making SETCC a standard ternary operation and
CC's a standard DAG leaf. This will make it possible for other node to use
CC's as operands in the future...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22728 91177308-0d34-0410-b5e6-96231b3b80d8
to pass it in. Also, since it always returns a non-null pointer, make it
return a reference instead for easier use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22686 91177308-0d34-0410-b5e6-96231b3b80d8
BasicBlock's removePredecessor routine. This requires shuffling around
the definition and implementation of hasContantValue from Utils.h,cpp into
Instructions.h,cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22664 91177308-0d34-0410-b5e6-96231b3b80d8
near the GOT, which new doesn't do. So break out the allocate into a new function.
Also move GOT index handling into JITResolver. This lets it update the mapping when a Lazy
function is JITed. It doesn't managed the table, just the mapping. Note that this is
still non-ideal, as any function that takes a function address should also take a GOT
index, but that is a lot of changes. The relocation resolve process updates any GOT entry
it sees is out of date.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22537 91177308-0d34-0410-b5e6-96231b3b80d8
Previously the script assumed the version number was the last field, now
it assumes it is the first sequence of digits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22527 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first incremental patch to implement this feature. It adds no
functionality to LLVM but setup up the information needed from targets in
order to implement the optimization correctly. Each target needs to specify
the maximum number of store operations for conversion of the llvm.memset,
llvm.memcpy, and llvm.memmove intrinsics into a sequence of store operations.
The limit needs to be chosen at the threshold of performance for such an
optimization (generally smallish). The target also needs to specify whether
the target can support unaligned stores for multi-byte store operations.
This helps ensure the optimization doesn't generate code that will trap on
an alignment errors.
More patches to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22468 91177308-0d34-0410-b5e6-96231b3b80d8
vector that represents the .o file at once, build up a vector for each
section of the .o file. This is needed because the .o file writer needs
to be able to switch between sections as it emits them (e.g. switch
between the .text section and the .rel section when emitting code).
This patch has no functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22453 91177308-0d34-0410-b5e6-96231b3b80d8
we actually get the path and not $GRAPHVIZ as the value.
* Add a #define for the gv program (HAVE_GV) and its value LLVM_PATH_GV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22433 91177308-0d34-0410-b5e6-96231b3b80d8
GRAPHVIZ will contain the path to the program if its found (or "echo Graphviz"
if not) and the #define HAVE_GRAPHVIZ will be defined if its found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22424 91177308-0d34-0410-b5e6-96231b3b80d8
This patch completes the changes for making lli thread-safe. Here's the list
of changes:
* The Support/ThreadSupport* files were removed and replaced with the
MutexGuard.h file since all ThreadSupport* declared was a Mutex Guard.
The implementation of MutexGuard.h is now based on sys::Mutex which hides
its implementation and makes it unnecessary to have the -NoSupport.h and
-PThreads.h versions of ThreadSupport.
* All places in ExecutionEngine that previously referred to "Mutex" now
refer to sys::Mutex
* All places in ExecutionEngine that previously referred to "MutexLocker"
now refer to MutexGuard (this is frivolous but I believe the technically
correct name for such a class is "Guard" not a "Locker").
These changes passed all of llvm-test. All we need now are some test cases
that actually use multiple threads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22404 91177308-0d34-0410-b5e6-96231b3b80d8
Add a Mutex class for thread synchronization in a platform-independent way.
The current implementation only supports pthreads. Win32 use of Critical
Sections will be added later. The design permits other threading models to
be used if (and only if) pthreads is not available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22403 91177308-0d34-0410-b5e6-96231b3b80d8
Implement the X86 Subtarget.
This consolidates the checks for target triple, and setting options based
on target triple into one place. This allows us to convert the asm printer
and isel over from being littered with "forDarwin", "forCygwin", etc. into
just having the appropriate flags for each subtarget feature controlling
the code for that feature.
This patch also implements indirect external and weak references in the
X86 pattern isel, for darwin. Next up is to convert over the asm printers
to use this new interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22389 91177308-0d34-0410-b5e6-96231b3b80d8
This is the last MVTSDNode.
This allows us to eliminate a bunch of special case code for handling
MVTSDNodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22367 91177308-0d34-0410-b5e6-96231b3b80d8
MVTSDNode class. This class is used to provide an operand to operators
that require an extra type. We start by converting FP_ROUND_INREG and
SIGN_EXTEND_INREG over to using it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22364 91177308-0d34-0410-b5e6-96231b3b80d8
This chagne just renames some sys::Path methods to ensure they are not
misused. The Path documentation now divides methods into two dimensions:
Path/Disk and accessor/mutator. Path accessors and mutators only operate
on the Path object itself without making any disk accesses. Disk accessors
and mutators will also access or modify the file system. Because of the
potentially destructive nature of disk mutators, it was decided that all
such methods should end in the work "Disk" to ensure the user recognizes
that the change will occur on the file system. This patch makes that
change. The method name changes are:
makeReadable -> makeReadableOnDisk
makeWriteable -> makeWriteableOnDisk
makeExecutable -> makeExecutableOnDisk
setStatusInfo -> setStatusInfoOnDisk
createDirectory -> createDirectoryOnDisk
createFile -> createFileOnDisk
createTemporaryFile -> createTemporaryFileOnDisk
destroy -> eraseFromDisk
rename -> renamePathOnDisk
These changes pass the Linux Deja Gnu tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22354 91177308-0d34-0410-b5e6-96231b3b80d8
Get rid of the difference between file paths and directory paths. The Path
class now simply stores a path that can refer to either a file or a
directory. This required various changes in the implementation and interface
of the class with the corresponding impact to its users. Doxygen comments were
also updated to reflect these changes. Interface changes are:
appendDirectory -> appendComponent
appendFile -> appendComponent
elideDirectory -> eraseComponent
elideFile -> eraseComponent
elideSuffix -> eraseSuffix
renameFile -> rename
setDirectory -> set
setFile -> set
Changes pass Dejagnu and llvm-test/SingleSource tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22349 91177308-0d34-0410-b5e6-96231b3b80d8
1. Pass Value*'s into lowering methods so that the proper pointers can be
added to load/stores from the valist
2. Intrinsics that return void should only return a token chain, not a token
chain/retval pair.
3. Rename LowerVAArgNext -> LowerVAArg, because VANext is long gone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22338 91177308-0d34-0410-b5e6-96231b3b80d8
For now, the elf writer is only capable of emitting an empty elf file, with
a section table and a section table string table. This will be enhanced
in the future :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22290 91177308-0d34-0410-b5e6-96231b3b80d8
enhancement for ffs, ffsl, and ffsll optimizations. We can't do the opt
unless we also have the at least ffsll function. Notably SVR4 doesn't.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22033 91177308-0d34-0410-b5e6-96231b3b80d8
