Swap usage of `SubclassData32` and `MDNodeSubclassData`, and rename
`MDNodeSubclassData` to `NumUnresolved`. Small drive-by cleanup to
`countUnresolvedOperands()` since otherwise the name clash with local
vars named `NumUnresolved` would be confusing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226523 91177308-0d34-0410-b5e6-96231b3b80d8
As pointed out in r226501, the distinction between `MDNode` and
`UniquableMDNode` is confusing. When we need subclasses of `MDNode`
that don't use all its functionality it might make sense to break it
apart again, but until then this makes the code clearer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226520 91177308-0d34-0410-b5e6-96231b3b80d8
Take advantage of the new ability of temporary nodes to mutate to
distinct and uniqued nodes to greatly simplify the `MapMetadata()`
helper functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226511 91177308-0d34-0410-b5e6-96231b3b80d8
Add `MDNode::replaceWithUniqued()` and `MDNode::replaceWithDistinct()`,
which mutate temporary nodes to become uniqued or distinct. On uniquing
collisions, the unique version is returned and the node is deleted.
This takes advantage of temporary nodes being folded back in, and should
let me clean up some awkward logic in `MapMetadata()`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226510 91177308-0d34-0410-b5e6-96231b3b80d8
r226504 added `TempMDNodeDeleter` to help with `std::unique_ptr<>`-izing
the `MDNode::getTemporary()` interface. It doesn't need to be
templated, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226509 91177308-0d34-0410-b5e6-96231b3b80d8
Change `MDTuple::getTemporary()` and `MDLocation::getTemporary()` to
return (effectively) `std::unique_ptr<T, MDNode::deleteTemporary>`, and
clean up call sites. (For now, `DIBuilder` call sites just call
`release()` immediately.)
There's an accompanying change in each of clang and polly to use the new
API.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226504 91177308-0d34-0410-b5e6-96231b3b80d8
The fixes are to note that AArch64 has additional restrictions on when local
relocations can be used. In particular, ld64 requires that relocations to
cstring/cfstrings use linker visible symbols.
Original message:
In an assembly expression like
bar:
.long L0 + 1
the intended semantics is that bar will contain a pointer one byte past L0.
In sections that are merged by content (strings, 4 byte constants, etc), a
single position in the section doesn't give the linker enough information.
For example, it would not be able to tell a relocation must point to the
end of a string, since that would look just like the start of the next.
The solution used in ELF to use relocation with symbols if there is a non-zero
addend.
In MachO before this patch we would just keep all symbols in some sections.
This would miss some cases (only cstrings on x86_64 were implemented) and was
inefficient since most relocations have an addend of 0 and can be represented
without the symbol.
This patch implements the non-zero addend logic for MachO too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226503 91177308-0d34-0410-b5e6-96231b3b80d8
Remove `MDNodeFwdDecl` (as promised in r226481). Aside from API
changes, there's no real functionality change here.
`MDNode::getTemporary()` now forwards to `MDTuple::getTemporary()`,
which returns a tuple with `isTemporary()` equal to true.
The main point is that we can now add temporaries of other `MDNode`
subclasses, needed for PR22235 (I introduced `MDNodeFwdDecl` in the
first place because I didn't recognize this need, and thought they were
only needed to handle forward references).
A few things left out of (or highlighted by) this commit:
- I've had to remove the (few) uses of `std::unique_ptr<>` to deal
with temporaries, since the destructor is no longer public.
`getTemporary()` should probably return the equivalent of
`std::unique_ptr<T, MDNode::deleteTemporary>`.
- `MDLocation::getTemporary()` doesn't exist yet (worse, it actually
does exist, but does the wrong thing: `MDNode::getTemporary()` is
inherited and returns an `MDTuple`).
- `MDNode` now only has one subclass, `UniquableMDNode`, and the
distinction between them is actually somewhat confusing.
I'll fix those up next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226501 91177308-0d34-0410-b5e6-96231b3b80d8
Merge `getDistinct()`'s implementation with those of `get()` and
`getIfExists()` for both `MDTuple` and `MDLocation`. This will make it
easier to scale to supporting temporaries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226497 91177308-0d34-0410-b5e6-96231b3b80d8
Unify the definitions of `MDNode::isResolved()` and
`UniquableMDNode::isResolved()`. Previously, `UniquableMDNode` could
answer this question more efficiently, but now that RAUW support has
been unified with `MDNodeFwdDecl`, `MDNode` doesn't need any casts to
figure out the answer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226485 91177308-0d34-0410-b5e6-96231b3b80d8
Add an `LLVMContext &` to `ReplaceableMetadataImpl`, create a class that
either holds a reference to an `LLVMContext` or owns a
`ReplaceableMetadataImpl`, and use the new class in `MDNode`.
- This saves a pointer in `UniquableMDNode` at the cost of a pointer
in `ValueAsMetadata` (which didn't used to store the `LLVMContext`).
There are far more of the former.
- Unifies RAUW support between `MDNodeFwdDecl` (which is going away,
see r226481) and `UniquableMDNode`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226484 91177308-0d34-0410-b5e6-96231b3b80d8
Change `MDNode::isDistinct()` to only apply to 'distinct' nodes (not
temporaries), and introduce `MDNode::isUniqued()` and
`MDNode::isTemporary()` for the other two possibilities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226482 91177308-0d34-0410-b5e6-96231b3b80d8
More clearly describe the type of storage used for `Metadata`.
- `Uniqued`: uniqued, stored in the context.
- `Distinct`: distinct, stored in the context.
- `Temporary`: not owned by anyone.
This is the first in a series of commits to fix a design problem with
`MDNodeFwdDecl` that I need to solve for PR22235. While `MDNodeFwdDecl`
works well as a forward declaration, we use `MDNode::getTemporary()` for
more than forward declarations -- we also need to create early versions
of nodes (with fields not filled in) that we'll fill out later (see
`DIBuilder::finalize()` and `CGDebugInfo::finalize()` for examples).
This was a blind spot I had when I introduced `MDNodeFwdDecl` (which
David Blaikie (indirectly) highlighted in an unrelated review [1]).
[1]: http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20150112/252381.html
In general, we need `MDTuple::getTemporary()` to give a temporary tuple
(like `MDNodeFwdDecl`), `MDLocation::getTemporary()` to give a temporary
location, and (the problem at hand) `GenericDebugMDNode::getTemporary()`
to give a temporary generic debug node.
So I need to fold the idea of "temporary" nodes back into
`UniquableMDNode`. (More commits to follow as I refactor.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226481 91177308-0d34-0410-b5e6-96231b3b80d8
frontends to use a DIExpression with a DW_OP_deref instead.
This is not only a much more natural place for this informationl; there
is also a technical reason: The FlagIndirectVariable is used to mark a
variable that is turned into a reference by virtue of the calling
convention; this happens for example to aggregate return values.
The inliner, for example, may actually need to undo this indirection to
correctly represent the value in its new context. This is impossible to
implement because the DIVariable can't be safely modified. We can however
safely construct a new DIExpression on the fly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226476 91177308-0d34-0410-b5e6-96231b3b80d8
and updated.
This may appear to remove handling for things like alias analysis when
splitting critical edges here, but in fact no callers of SplitEdge
relied on this. Similarly, all of them wanted to preserve LCSSA if there
was any update of the loop info. That makes the interface much simpler.
With this, all of BasicBlockUtils.h is free of Pass arguments and
prepared for the new pass manager. This is tho majority of utilities
that relied on pass arguments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226459 91177308-0d34-0410-b5e6-96231b3b80d8
while refactoring this API for the new pass manager.
No functionality changed here, the code didn't actually support this
option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226457 91177308-0d34-0410-b5e6-96231b3b80d8
APIs and replace it and numerous booleans with an option struct.
The critical edge splitting API has a really large surface of flags and
so it seems worth burning a small option struct / builder. This struct
can be constructed with the various preserved analyses and then flags
can be flipped in a builder style.
The various users are now responsible for directly passing along their
analysis information. This should be enough for the critical edge
splitting to work cleanly with the new pass manager as well.
This API is still pretty crufty and could be cleaned up a lot, but I've
focused on this change just threading an option struct rather than
a pass through the API.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226456 91177308-0d34-0410-b5e6-96231b3b80d8
SplitLandingPadPredecessors and remove the Pass argument from its
interface.
Another step to the utilities being usable with both old and new pass
managers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226426 91177308-0d34-0410-b5e6-96231b3b80d8
There is no reason for this state to be exposed as public. The single element
constructor was superfulous in light of the single element ArrayRef
constructor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226424 91177308-0d34-0410-b5e6-96231b3b80d8
Since MCStreamer isn't part of Support, the dtor can't be called from
here - so just pass by reference instead. This is rather imperfect, but
will hopefully suffice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226415 91177308-0d34-0410-b5e6-96231b3b80d8
rather than relying on the pass object.
This one is a bit annoying, but will pay off. First, supporting this one
will make the next one much easier, and for utilities like LoopSimplify,
this is moving them (slowly) closer to not having to pass the pass
object around throughout their APIs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226396 91177308-0d34-0410-b5e6-96231b3b80d8
interface, removing Pass from its interface.
This also makes those analyses optional so that passes which don't even
preserve these (or use them) can skip the logic entirely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226394 91177308-0d34-0410-b5e6-96231b3b80d8
optionally updated by MergeBlockIntoPredecessors.
No functionality changed, just refactoring to clear the way for the new
pass manager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226392 91177308-0d34-0410-b5e6-96231b3b80d8
accepting a Pass and querying it for analyses.
This is necessary to allow the utilities to work both with the old and
new pass managers, and I also think this makes the interface much more
clear and helps the reader know what analyses the utility can actually
handle. I plan to repeat this process iteratively to clean up all the
pass utilities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226386 91177308-0d34-0410-b5e6-96231b3b80d8
cleaner to derive from the generic base.
Thise removes a ton of boiler plate code and somewhat strange and
pointless indirections. It also remove a bunch of the previously needed
friend declarations. To fully remove these, I also lifted the verify
logic into the generic LoopInfoBase, which seems good anyways -- it is
generic and useful logic even for the machine side.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226385 91177308-0d34-0410-b5e6-96231b3b80d8
a LoopInfoWrapperPass to wire the object up to the legacy pass manager.
This switches all the clients of LoopInfo over and paves the way to port
LoopInfo to the new pass manager. No functionality change is intended
with this iteration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226373 91177308-0d34-0410-b5e6-96231b3b80d8
RuntimeDyld symbol info previously consisted of just a Section/Offset pair. This
patch replaces that pair type with a SymbolInfo class that also tracks symbol
visibility. A new method, RuntimeDyld::getExportedSymbolLoadAddress, is
introduced which only returns a non-zero result for exported symbols. For
non-exported or non-existant symbols this method will return zero. The
RuntimeDyld::getSymbolAddress method retains its current behavior, returning
non-zero results for all symbols regardless of visibility.
No in-tree clients of RuntimeDyld are changed. The newly introduced
functionality will be used by the Orc APIs.
No test case: Since this patch doesn't modify the behavior for any in-tree
clients we don't have a good tool to test this with yet. Once Orc is in we can
use it to write regression tests that test these changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226341 91177308-0d34-0410-b5e6-96231b3b80d8
Note: This change ended up being slightly more controversial than expected. Chandler has tentatively okayed this for the moment, but I may be revisiting this in the near future after we settle some high level questions.
Rather than have the GCStrategy object owned by the GCModuleInfo - which is an immutable analysis pass used mainly by gc.root - have it be owned by the LLVMContext. This simplifies the ownership logic (i.e. can you have two instances of the same strategy at once?), but more importantly, allows us to access the GCStrategy in the middle end optimizer. To this end, I add an accessor through Function which becomes the canonical way to get at a GCStrategy instance.
In the near future, this will allows me to move some of the checks from http://reviews.llvm.org/D6808 into the Verifier itself, and to introduce optimization legality predicates for some of the recent additions to InstCombine. (These will follow as separate changes.)
Differential Revision: http://reviews.llvm.org/D6811
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226311 91177308-0d34-0410-b5e6-96231b3b80d8
Searching all of the existing gc.root implementations I'm aware of (all three of them), there was exactly one use of this mechanism, and that was to implement a performance improvement that should have been applied to the default lowering.
Having this function is requiring a dependency on a CodeGen class (MachineFunction), in a class which is otherwise completely independent of CodeGen. I could solve this differently, but given that I see absolutely no value in preserving this mechanism, I going to just get rid of it.
Note: Tis is the first time I'm intentionally breaking previously supported gc.root functionality. Given 3.6 has branched, I believe this is a good time to do this.
Differential Revision: http://reviews.llvm.org/D7004
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226305 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to the unaligned cases.
Test was generated with update_llc_test_checks.py.
Part of <rdar://problem/17688758>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226296 91177308-0d34-0410-b5e6-96231b3b80d8
IRCE eliminates range checks of the form
0 <= A * I + B < Length
by splitting a loop's iteration space into three segments in a way
that the check is completely redundant in the middle segment. As an
example, IRCE will convert
len = < known positive >
for (i = 0; i < n; i++) {
if (0 <= i && i < len) {
do_something();
} else {
throw_out_of_bounds();
}
}
to
len = < known positive >
limit = smin(n, len)
// no first segment
for (i = 0; i < limit; i++) {
if (0 <= i && i < len) { // this check is fully redundant
do_something();
} else {
throw_out_of_bounds();
}
}
for (i = limit; i < n; i++) {
if (0 <= i && i < len) {
do_something();
} else {
throw_out_of_bounds();
}
}
IRCE can deal with multiple range checks in the same loop (it takes
the intersection of the ranges that will make each of them redundant
individually).
Currently IRCE does not do any profitability analysis. That is a
TODO.
Please note that the status of this pass is *experimental*, and it is
not part of any default pass pipeline. Having said that, I will love
to get feedback and general input from people interested in trying
this out.
This pass was originally r226201. It was reverted because it used C++
features not supported by MSVC 2012.
Differential Revision: http://reviews.llvm.org/D6693
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226238 91177308-0d34-0410-b5e6-96231b3b80d8
be exported from a dylib if their containing object file were linked into one.
No test case: No command line tools query this flag, and there are no Object
unit tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226217 91177308-0d34-0410-b5e6-96231b3b80d8
The change used C++11 features not supported by MSVC 2012. I will fix
the change to use things supported MSVC 2012 and recommit shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226216 91177308-0d34-0410-b5e6-96231b3b80d8
IRCE eliminates range checks of the form
0 <= A * I + B < Length
by splitting a loop's iteration space into three segments in a way
that the check is completely redundant in the middle segment. As an
example, IRCE will convert
len = < known positive >
for (i = 0; i < n; i++) {
if (0 <= i && i < len) {
do_something();
} else {
throw_out_of_bounds();
}
}
to
len = < known positive >
limit = smin(n, len)
// no first segment
for (i = 0; i < limit; i++) {
if (0 <= i && i < len) { // this check is fully redundant
do_something();
} else {
throw_out_of_bounds();
}
}
for (i = limit; i < n; i++) {
if (0 <= i && i < len) {
do_something();
} else {
throw_out_of_bounds();
}
}
IRCE can deal with multiple range checks in the same loop (it takes
the intersection of the ranges that will make each of them redundant
individually).
Currently IRCE does not do any profitability analysis. That is a
TODO.
Please note that the status of this pass is *experimental*, and it is
not part of any default pass pipeline. Having said that, I will love
to get feedback and general input from people interested in trying
this out.
Differential Revision: http://reviews.llvm.org/D6693
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226201 91177308-0d34-0410-b5e6-96231b3b80d8
TargetLibraryAnalysis pass.
There are actually no direct tests of this already in the tree. I've
added the most basic test that the pass manager bits themselves work,
and the TLI object produced will be tested by an upcoming patches as
they port passes which rely on TLI.
This is starting to point out the awkwardness of the invalidate API --
it seems poorly fitting on the *result* object. I suspect I will change
it to live on the analysis instead, but that's not for this change, and
I'd rather have a few more passes ported in order to have more
experience with how this plays out.
I believe there is only one more analysis required in order to start
porting instcombine. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226160 91177308-0d34-0410-b5e6-96231b3b80d8
The pass is really just a means of accessing a cached instance of the
TargetLibraryInfo object, and this way we can re-use that object for the
new pass manager as its result.
Lots of delta, but nothing interesting happening here. This is the
common pattern that is developing to allow analyses to live in both the
old and new pass manager -- a wrapper pass in the old pass manager
emulates the separation intrinsic to the new pass manager between the
result and pass for analyses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226157 91177308-0d34-0410-b5e6-96231b3b80d8
While the term "Target" is in the name, it doesn't really have to do
with the LLVM Target library -- this isn't an abstraction which LLVM
targets generally need to implement or extend. It has much more to do
with modeling the various runtime libraries on different OSes and with
different runtime environments. The "target" in this sense is the more
general sense of a target of cross compilation.
This is in preparation for porting this analysis to the new pass
manager.
No functionality changed, and updates inbound for Clang and Polly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226078 91177308-0d34-0410-b5e6-96231b3b80d8
The transform is somewhat involved, but the basic idea is simple: find
derived pointers that have been offset from the base pointer using gep
and replace the relocate of the derived pointer with a gep to the
relocated base pointer (with the same offset).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226060 91177308-0d34-0410-b5e6-96231b3b80d8
This commit moves `MDLocation`, finishing off PR21433. There's an
accompanying clang commit for frontend testcases. I'll attach the
testcase upgrade script I used to PR21433 to help out-of-tree
frontends/backends.
This changes the schema for `DebugLoc` and `DILocation` from:
!{i32 3, i32 7, !7, !8}
to:
!MDLocation(line: 3, column: 7, scope: !7, inlinedAt: !8)
Note that empty fields (line/column: 0 and inlinedAt: null) don't get
printed by the assembly writer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226048 91177308-0d34-0410-b5e6-96231b3b80d8
Sometimes teardown happens before the debug info graph is complete
(e.g., when clang throws an error). In that case, `MDNode`s will still
have RAUW, so deleting constants that the `MDNode`s point at will be
relatively expensive -- it'll cause re-uniquing all up the chain (what
I've been referring to as "teardown madness").
So, drop references *before* deleting constants. We need to drop a few
more references now: the metadata side of the metadata/value bridges
needs to be dropped off the cliff along with the rest of it (previously,
the bridges were cleaned before we did anything with the `MDNode`s).
There's no real functionality change here -- state before and after
`LLVMContextImpl::~LLVMContextImpl()` is unchanged -- so no testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226044 91177308-0d34-0410-b5e6-96231b3b80d8
I haven't looked closely at exactly why the side effect is required, but
this seems better than not mentioning it at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226030 91177308-0d34-0410-b5e6-96231b3b80d8
utils/sort_includes.py.
I clearly haven't done this in a while, so more changed than usual. This
even uncovered a missing include from the InstrProf library that I've
added. No functionality changed here, just mechanical cleanup of the
include order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225974 91177308-0d34-0410-b5e6-96231b3b80d8
Now that the passes are wrappers around this, we no longer need
a vtable, virtual destructor, and other associated mess. This is
particularly nice to me as this is a class template. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225970 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the domtree analysis to the new pass manager. The analysis
returns the same DominatorTree result entity used by the old pass
manager and essentially all of the code is shared. We just have
different boilerplate for running and printing the analysis.
I've converted one test to run in both modes just to make sure this is
exercised while both are live in the tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225969 91177308-0d34-0410-b5e6-96231b3b80d8
into the new pass manager's analysis cache which stores results
by-value.
Technically speaking, the dom trees were originally not movable but
copyable! This, unsurprisingly, didn't work at all -- the copy was
shallow and just resulted in rampant memory corruption. This change
explicitly forbids copying (as it would need to be a deep copy) and
makes them explicitly movable with the unsurprising boiler plate to
member-wise move them because we can't rely on MSVC to generate this
code for us. =/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225966 91177308-0d34-0410-b5e6-96231b3b80d8
When processing an array, every Elt has the same layout, it is
useless to recursively call each ComputeLinearIndex on each element.
Just do it once and multiply by the number of elements.
Differential Revision: http://reviews.llvm.org/D6832
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225949 91177308-0d34-0410-b5e6-96231b3b80d8
class members are implicitly "inline", no key word needed.
Naturally, this could change how LLVM inlines these functions because
<GRR>, but that's not an excuse to use the keyword. ;]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225939 91177308-0d34-0410-b5e6-96231b3b80d8
significantly. Clean it up with the help of clang-format.
I've touched this up by hand in a couple of places that weren't quite
right (IMO). I think most of these actually have bugs open about
already.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225938 91177308-0d34-0410-b5e6-96231b3b80d8
Now that the source and destination types can be specified,
allow doing an expansion that doesn't use an EXTLOAD of the
result type. Try to do a legal extload to an intermediate type
and extend that if possible.
This generalizes the special case custom lowering of extloads
R600 has been using to work around this problem.
This also happens to fix a bug that would incorrectly use more
aligned loads than should be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225925 91177308-0d34-0410-b5e6-96231b3b80d8
A pass that adds random noops to X86 binaries to introduce diversity with the goal of increasing security against most return-oriented programming attacks.
Command line options:
-noop-insertion // Enable noop insertion.
-noop-insertion-percentage=X // X% of assembly instructions will have a noop prepended (default: 50%, requires -noop-insertion)
-max-noops-per-instruction=X // Randomly generate X noops per instruction. ie. roll the dice X times with probability set above (default: 1). This doesn't guarantee X noop instructions.
In addition, the following 'quick switch' in clang enables basic diversity using default settings (currently: noop insertion and schedule randomization; it is intended to be extended in the future).
-fdiversify
This is the llvm part of the patch.
clang part: D3393
http://reviews.llvm.org/D3392
Patch by Stephen Crane (@rinon)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225908 91177308-0d34-0410-b5e6-96231b3b80d8
This adds handling for ExceptionHandling::MSVC, used by the
x86_64-pc-windows-msvc triple. It assumes that filter functions have
already been outlined in either the frontend or the backend. Filter
functions are used in place of the landingpad catch clause type info
operands. In catch clause order, the first filter to return true will
catch the exception.
The C specific handler table expects the landing pad to be split into
one block per handler, but LLVM IR uses a single landing pad for all
possible unwind actions. This patch papers over the mismatch by
synthesizing single instruction BBs for every catch clause to fill in
the EH selector that the landing pad block expects.
Missing functionality:
- Accessing data in the parent frame from outlined filters
- Cleanups (from __finally) are unsupported, as they will require
outlining and parent frame access
- Filter clauses are unsupported, as there's no clear analogue in SEH
In other words, this is the minimal set of changes needed to write IR to
catch arbitrary exceptions and resume normal execution.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D6300
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225904 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out, all callsites of the simplifier are guarded by a check for
CallInst::getCalledFunction (i.e., to make sure the callee is direct).
This check wasn't done when trying to further optimize a simplified fortified
libcall, introduced by a refactoring in r225640.
Fix that, add a testcase, and document the requirement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225895 91177308-0d34-0410-b5e6-96231b3b80d8
a print method.
This was formulated on a bad idea, but sadly I didn't uncover how bad
this was until I got further down the path. I had hoped that we could
provide a low boilerplate way of printing analyses, but it just doesn't
seem like this really fits the needs of the analyses. Not all analyses
really want to do printing, and those that do don't all use the same
interface. Instead, with the new pass manager let's just take advantage
of the fact that creating an explicit printer pass like the LCG has is
pretty low boilerplate already and rely on that for testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225861 91177308-0d34-0410-b5e6-96231b3b80d8
I'm adding generic analysis printing utility pass support which will
require such a method (or a specialization) so this will let the
existing printing logic satisfy that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225854 91177308-0d34-0410-b5e6-96231b3b80d8
and expose the necessary hooks in the API directly.
This makes it much cleaner for example to log the usage of a pass
manager from a library. It also makes it more obvious that this
functionality isn't "optional" or "asserts-only" for the pass manager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225841 91177308-0d34-0410-b5e6-96231b3b80d8
referring to and give them nice comments.
Previously, these were used, but now things use the generic form of the
AnalysisManager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225833 91177308-0d34-0410-b5e6-96231b3b80d8
This adds assembly and bitcode support for `MDLocation`. The assembly
side is rather big, since this is the first `MDNode` subclass (that
isn't `MDTuple`). Part of PR21433.
(If you're wondering where the mountains of testcase updates are, we
don't need them until I update `DILocation` and `DebugLoc` to actually
use this class.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225830 91177308-0d34-0410-b5e6-96231b3b80d8
This requires a new hook to prevent expanding sqrt in terms
of rsqrt and reciprocal. v_rcp_f32, v_rsq_f32, and v_sqrt_f32 are
all the same rate, so this expansion would just double the number
of instructions and cycles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225828 91177308-0d34-0410-b5e6-96231b3b80d8
Add a new subclass of `UniquableMDNode`, `MDLocation`. This will be the
IR version of `DebugLoc` and `DILocation`. The goal is to rename this
to `DILocation` once the IR classes supersede the `DI`-prefixed
wrappers.
This isn't used anywhere yet. Part of PR21433.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225824 91177308-0d34-0410-b5e6-96231b3b80d8
No functional changes, I'm just going to be doing a lot of work in these files and it would be helpful if they had more current LLVM style.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225817 91177308-0d34-0410-b5e6-96231b3b80d8
While, generally speaking, the process of lowering arguments for a patchpoint
is the same as lowering a regular indirect call, on some targets it may not be
exactly the same. Targets may not, for example, want to add additional register
dependencies that apply only to making cross-DSO calls through linker stubs,
may not want to load additional registers out of function descriptors, and may
not want to add additional side-effect-causing instructions that cannot be
removed later with the call itself being generated.
The PowerPC target will use this in a future commit (for all of the reasons
stated above).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225806 91177308-0d34-0410-b5e6-96231b3b80d8
Some targets, PowerPC for example, have pseudo-registers (such as that used to
represent the rounding mode), that don't have DWARF register numbers or a
register class. These are used only for internal dependency tracking, and
should not appear in the recorded live-outs. This adds a callback allowing the
target to pre-process the live-out mask in order to remove these kinds of
registers so that the StackMaps code does not complain about them and/or
attempt to include them in the output.
This will be used by the PowerPC target in a future commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225805 91177308-0d34-0410-b5e6-96231b3b80d8
a nested class template for the PassModel, and use the T-suffix for the
two typedefs to match the code in the AnalysisManager.
This is the last of the fairly fundamental code cleanups here. Will be
focusing on the printing of analyses next to finish that aspect off.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225785 91177308-0d34-0410-b5e6-96231b3b80d8
of templates in the new pass manager.
The analysis manager is now itself just a template predicated on the IR
unit. This makes lots of the templates really trivial and more clear:
they are all parameterized on a single type, the IR unit's type.
Everything else is a function of that. To me, this is a really nice
cleanup of the APIs and removes a layer of 'magic' and 'indirection'
that really wasn't there and just got in the way of understanding what
is going on here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225784 91177308-0d34-0410-b5e6-96231b3b80d8
the generic functionality of the pass managers themselves.
In the new infrastructure, the pass "manager" isn't actually interesting
at all. It just pipelines a single chunk of IR through N passes. We
don't need to know anything about the IR or the passes to do this really
and we can replace the 3 implementations of the exact same functionality
with a single generic PassManager template, complementing the single
generic AnalysisManager template.
I've left typedefs in place to give convenient names to the various
obvious instantiations of the template.
With this, I think I've nuked almost all of the redundant logic in the
managers, and I think the overall design is actually simpler for having
single templates that clearly indicate there is no special logic here.
The logging is made somewhat more annoying by this change, but I don't
think the difference is worth having heavy-weight traits to help log
things.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225783 91177308-0d34-0410-b5e6-96231b3b80d8
Peephole optimizer is scanning a basic block forward. At some point it
needs to answer the question "given a pointer to an MI in the current
BB, is it located before or after the current instruction".
To perform this, it keeps a set of the MIs already seen during the scan,
if a MI is not in the set, it is assumed to be after.
It means that newly created MIs have to be inserted in the set as well.
This commit passes the set as an argument to the target-dependent
optimizeSelect() so that it can properly update the set with the
(potentially) newly created MIs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225772 91177308-0d34-0410-b5e6-96231b3b80d8
The functions {pred,succ,use,user}_{begin,end} exist, but many users
have to check *_begin() with *_end() by hand to determine if the
BasicBlock or User is empty. Fix this with a standard *_empty(),
demonstrating a few usecases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225760 91177308-0d34-0410-b5e6-96231b3b80d8
template.
This consolidates three copies of nearly the same core logic. It adds
"complexity" to the ModuleAnalysisManager in that it makes it possible
to share a ModuleAnalysisManager across multiple modules... But it does
so by deleting *all of the code*, so I'm OK with that. This will
naturally make fixing bugs in this code much simpler, etc.
The only down side here is that we have to use 'typename' and 'this->'
in various places, and the implementation is lifted into the header.
I'll take that for the code size reduction.
The convenient names are still typedef-ed and used throughout so that
users can largely ignore this aspect of the implementation.
The follow-up change to this will do the exact same refactoring for the
PassManagers. =D
It turns out that the interesting different code is almost entirely in
the adaptors. At the end, that should be essentially all that is left.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225757 91177308-0d34-0410-b5e6-96231b3b80d8
This name is less descriptive, but it sort of puts things in the
'llvm.frame...' namespace, relating it to frameallocate and
frameaddress. It also avoids using "allocate" and "allocation" together.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225752 91177308-0d34-0410-b5e6-96231b3b80d8
These intrinsics allow multiple functions to share a single stack
allocation from one function's call frame. The function with the
allocation may only perform one allocation, and it must be in the entry
block.
Functions accessing the allocation call llvm.recoverframeallocation with
the function whose frame they are accessing and a frame pointer from an
active call frame of that function.
These intrinsics are very difficult to inline correctly, so the
intention is that they be introduced rarely, or at least very late
during EH preparation.
Reviewers: echristo, andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D6493
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225746 91177308-0d34-0410-b5e6-96231b3b80d8
so has clang-format. Notably, this fixes a bunch of formatting in the
CGSCC pass manager side of things that has been improved in clang-format
recently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225743 91177308-0d34-0410-b5e6-96231b3b80d8
templated interface.
So far, every single IR unit I can come up with has address-identity.
That is, when two units of IR are both active in LLVM, their addresses
will be distinct of the IR is distinct. This is clearly true for
Modules, Functions, BasicBlocks, and Instructions. It turns out that the
only practical way to make the CGSCC stuff work the way we want is to
make it true for SCCs as well. I expect this pattern to continue.
When first designing the pass manager code, I kept this dimension of
freedom in the type parameters, essentially allowing for a wrapper-type
whose address did not form identity. But that really no longer makes
sense and is making the code more complex or subtle for no gain. If we
ever have an actual use case for this, we can figure out what makes
sense then and there. It will be better because then we will have the
actual example in hand.
While the simplifications afforded in this patch are fairly small
(mostly sinking the '&' out of many type parameters onto a few
interfaces), it would have become much more pronounced with subsequent
changes. I have a sequence of changes that will completely remove the
code duplication that currently exists between all of the pass managers
and analysis managers. =] Should make things much cleaner and avoid bug
fixing N times for the N pass managers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225723 91177308-0d34-0410-b5e6-96231b3b80d8
Add generic dispatch for the parts of `UniquableMDNode` that cast to
`MDTuple`. This makes adding other subclasses (like PR21433's
`MDLocation`) easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225697 91177308-0d34-0410-b5e6-96231b3b80d8
Stop erasing `MDNode`s from the uniquing sets in `LLVMContextImpl`
during teardown (in particular, during
`UniquableMDNode::~UniquableMDNode()`). Although it's currently
feasible, there isn't any clear benefit and it may not be feasible for
other subclasses (which don't explicitly store the lookup hash).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225696 91177308-0d34-0410-b5e6-96231b3b80d8
Same as with `MDTuple`, factor out a `friend MDNode` by moving creation
logic to the concrete subclass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225690 91177308-0d34-0410-b5e6-96231b3b80d8
Move creation logic for `MDTuple`s down where it belongs. Once there
are a few more subclasses, these functions really won't make much sense
here (the `friend` relationship was already awkward). For now, leave
the `MDNode` versions around, but have it forward down.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225685 91177308-0d34-0410-b5e6-96231b3b80d8
Split `GenericMDNode` into two classes (with more descriptive names).
- `UniquableMDNode` will be a common subclass for `MDNode`s that are
sometimes uniqued like constants, and sometimes 'distinct'.
This class gets the (short-lived) RAUW support and related API.
- `MDTuple` is the basic tuple that has always been returned by
`MDNode::get()`. This is as opposed to more specific nodes to be
added soon, which have additional fields, custom assembly syntax,
and extra semantics.
This class gets the hash-related logic, since other sublcasses of
`UniquableMDNode` may need to hash based on other fields.
To keep this diff from getting too big, I've added casts to `MDTuple`
that won't really scale as new subclasses of `UniquableMDNode` are
added, but I'll clean those up incrementally.
(No functionality change intended.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225682 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of returning early on `handleChangedOperand()` recursion
(finally identified (and test added) in r225657), prevent it upfront by
releasing operands before RAUW.
Aside from massively different program flow, there should be no
functionality change ;).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225665 91177308-0d34-0410-b5e6-96231b3b80d8
This adds two new fields to the RegisterOperand TableGen class:
string OperandNamespace = "MCOI";
string OperandType = "OPERAND_REGISTER";
These fields can be used to specify a target specific operand type,
which will be stored in the OperandType member of the MCOperandInfo
object.
This can be useful for targets that need to store some extra information
about operands that cannot be expressed using the target independent
types. For example, in the R600 backend, there are operands which
can take either registers or immediates and it is convenient to be able
to specify this in the TableGen definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225661 91177308-0d34-0410-b5e6-96231b3b80d8
Change the return of `MDNode::isDistinct()` for `MDNode::getTemporary()`
to `true`. They aren't uniqued.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225646 91177308-0d34-0410-b5e6-96231b3b80d8
One is that AArch64 has additional restrictions on when local relocations can
be used. We have to take those into consideration when deciding to put a L
symbol in the symbol table or not.
The other is that ld64 requires the relocations to cstring to use linker
visible symbols on AArch64.
Thanks to Michael Zolotukhin for testing this!
Remove doesSectionRequireSymbols.
In an assembly expression like
bar:
.long L0 + 1
the intended semantics is that bar will contain a pointer one byte past L0.
In sections that are merged by content (strings, 4 byte constants, etc), a
single position in the section doesn't give the linker enough information.
For example, it would not be able to tell a relocation must point to the
end of a string, since that would look just like the start of the next.
The solution used in ELF to use relocation with symbols if there is a non-zero
addend.
In MachO before this patch we would just keep all symbols in some sections.
This would miss some cases (only cstrings on x86_64 were implemented) and was
inefficient since most relocations have an addend of 0 and can be represented
without the symbol.
This patch implements the non-zero addend logic for MachO too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225644 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for parsing and emitting the SBREL relocation variant for the
ARM target. Handling this relocation variant is necessary for supporting the
full ARM ELF specification. Addresses PR22128.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225595 91177308-0d34-0410-b5e6-96231b3b80d8
This default constructor is a bit weird. It left the range in an invalid
state. That might be reasonable so that you can construct a local
iterator range and assign to it based on some logic to compute the range
you want. If folks would like to support that use case, I can add it
back, but in 238-odd usages none have actually wanted to do this. ;]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225592 91177308-0d34-0410-b5e6-96231b3b80d8
The bitcode reading interface used std::error_code to report an error to the
callers and it is the callers job to print diagnostics.
This is not ideal for error handling or diagnostic reporting:
* For error handling, all that the callers care about is 3 possibilities:
* It worked
* The bitcode file is corrupted/invalid.
* The file is not bitcode at all.
* For diagnostic, it is user friendly to include far more information
about the invalid case so the user can find out what is wrong with the
bitcode file. This comes up, for example, when a developer introduces a
bug while extending the format.
The compromise we had was to have a lot of error codes.
With this patch we use the DiagnosticHandler to communicate with the
human and std::error_code to communicate with the caller.
This allows us to have far fewer error codes and adds the infrastructure to
print better diagnostics. This is so because the diagnostics are printed when
he issue is found. The code that detected the problem in alive in the stack and
can pass down as much context as needed. As an example the patch updates
test/Bitcode/invalid.ll.
Using a DiagnosticHandler also moves the fatal/non-fatal error decision to the
caller. A simple one like llvm-dis can just use fatal errors. The gold plugin
needs a bit more complex treatment because of being passed non-bitcode files. An
hypothetical interactive tool would make all bitcode errors non-fatal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225562 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
One more attempt to fix UBSan reports: make sure DenseMapInfo::getEmptyKey()
and DenseMapInfo::getTombstoneKey() doesn't do any upcasts/downcasts to/from Value*.
Test Plan: check-llvm test suite with/without UBSan bootstrap
Reviewers: chandlerc, dexonsmith
Subscribers: llvm-commits, majnemer
Differential Revision: http://reviews.llvm.org/D6903
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225558 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r225498 (but leaves r225499, which was a worthy
cleanup).
My plan was to change `DEBUG_LOC` to store the `MDNode` directly rather
than its operands (patch was to go out this morning), but on reflection
it's not clear that it's strictly better. (I had missed that the
current code is unlikely to emit the `MDNode` at all.)
Conflicts:
lib/Bitcode/Reader/BitcodeReader.cpp (due to r225499)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225531 91177308-0d34-0410-b5e6-96231b3b80d8
This was used previously for metadata but is no longer needed there. Not
doing this simplifies ValueHandle and will make it easier to fix things
like AssertingVH's DenseMapInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225487 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, MemDepPrinter handled volatile and unordered accesses without involving MemoryDependencyAnalysis. By making a slight tweak to the documented interface - which is respected by both callers - we can move this responsibility to MDA for the benefit of any future callers. This is basically just cleanup.
In the future, we may decide to extend MDA's non local dependency analysis to return useful results for ordered or volatile loads. I believe (but have not really checked in detail) that local dependency analyis does get useful results for ordered, but not volatile, loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225483 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, MemoryDependenceAnalysis::getNonLocalPointerDependency was taking a list of properties about the instruction being queried. Since I'm about to need one more property to be passed down through the infrastructure - I need to know a query instruction is non-volatile in an inner helper - fix the interface once and for all.
I also added some assertions and behaviour clarifications around volatile and ordered field accesses. At the moment, this is mostly to document expected behaviour. The only non-standard instructions which can currently reach this are atomic, but unordered, loads and stores. Neither ordered or volatile accesses can reach here.
The call in GVN is protected by an isSimple check when it first considers the load. The calls in MemDepPrinter are protected by isUnordered checks. Both utilities also check isVolatile for loads and stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225481 91177308-0d34-0410-b5e6-96231b3b80d8
Propagate whether `MDNode`s are 'distinct' through the other types of IR
(assembly and bitcode). This adds the `distinct` keyword to assembly.
Currently, no one actually calls `MDNode::getDistinct()`, so these nodes
only get created for:
- self-references, which are never uniqued, and
- nodes whose operands are replaced that hit a uniquing collision.
The concept of distinct nodes is still not quite first-class, since
distinct-ness doesn't yet survive across `MapMetadata()`.
Part of PR22111.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225474 91177308-0d34-0410-b5e6-96231b3b80d8
PEI tries to keep track of how much starting or ending a call sequence adjusts the stack pointer by, so that it can resolve frame-index references. Currently, it takes a very simplistic view of how SP adjustments are done - both FrameStartOpcode and FrameDestroyOpcode adjust it exactly by the amount written in its first argument.
This view is in fact incorrect for some targets (e.g. due to stack re-alignment, or because it may want to adjust the stack pointer in multiple steps). However, that doesn't cause breakage, because most targets (the only in-tree exception appears to be 32-bit ARM) rely on being able to simplify the call frame pseudo-instructions earlier, so this code is never hit.
Moving the computation into TargetInstrInfo allows targets to override the way the adjustment is computed if they need to have a non-zero SPAdj.
Differential Revision: http://reviews.llvm.org/D6863
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225437 91177308-0d34-0410-b5e6-96231b3b80d8
type (in addition to the memory type).
The *LoadExt* legalization handling used to only have one type, the
memory type. This forced users to assume that as long as the extload
for the memory type was declared legal, and the result type was legal,
the whole extload was legal.
However, this isn't always the case. For instance, on X86, with AVX,
this is legal:
v4i32 load, zext from v4i8
but this isn't:
v4i64 load, zext from v4i8
Whereas v4i64 is (arguably) legal, even without AVX2.
Note that the same thing was done a while ago for truncstores (r46140),
but I assume no one needed it yet for extloads, so here we go.
Calls to getLoadExtAction were changed to add the value type, found
manually in the surrounding code.
Calls to setLoadExtAction were mechanically changed, by wrapping the
call in a loop, to match previous behavior. The loop iterates over
the MVT subrange corresponding to the memory type (FP vectors, etc...).
I also pulled neighboring setTruncStoreActions into some of the loops;
those shouldn't make a difference, as the additional types are illegal.
(e.g., i128->i1 truncstores on PPC.)
No functional change intended.
Differential Revision: http://reviews.llvm.org/D6532
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225421 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have MVT::FIRST_VALUETYPE (r225362), we can provide a method
checking that the MVT is valid, that is, it's in
[FIRST_VALUETYPE, LAST_VALUETYPE[.
This commit also uses it in a few asserts, that would previously accept
invalid MVTs, such as the default constructed -1. In that case,
the code following those asserts would do an out-of-bounds array access.
Using MVT::isValid, those assertions fail as expected when passed
invalid MVTs.
It feels clunky to have such a validity checking function, but it's
at least better than the alternative of broken manual checks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225411 91177308-0d34-0410-b5e6-96231b3b80d8
Allow distinct `MDNode`s to be explicitly created. There's no way (yet)
of representing their distinctness in assembly/bitcode, however, so this
still isn't first-class.
Part of PR22111.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225406 91177308-0d34-0410-b5e6-96231b3b80d8
Add API to indicate whether an `MDNode` is distinct. A distinct node is
not stored in the MDNode uniquing tables, and will never be returned by
`MDNode::get()`.
Although distinct nodes are only currently created by uniquing
collisions (when operands change), PR22111 will allow these nodes to be
explicitly created.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225401 91177308-0d34-0410-b5e6-96231b3b80d8
`MDNode::replaceOperandWith()` changes all instances of metadata. Stop
using it when linking module flags, since (due to uniquing) the flag
values could be used by other metadata.
Instead, use new API `NamedMDNode::setOperand()` to update the reference
directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225397 91177308-0d34-0410-b5e6-96231b3b80d8
This change includes the most basic possible GCStrategy for a GC which is using the statepoint lowering code. At the moment, this GCStrategy doesn't really do much - aside from actually generate correct stackmaps that is - but I went ahead and added a few extra correctness checks as proof of concept. It's mostly here to provide documentation on how to do one, and to provide a point for various optimization legality hooks I'd like to add going forward. (For context, see the TODOs in InstCombine around gc.relocate.)
Most of the validation logic added here as proof of concept will soon move in to the Verifier. That move is dependent on http://reviews.llvm.org/D6811
There was discussion in the review thread about addrspace(1) being reserved for something. I'm going to follow up on a seperate llvmdev thread. If needed, I'll update all the code at once.
Note that I am deliberately not making a GCStrategy required to use gc.statepoints with this change. I want to give folks out of tree - including myself - a chance to migrate. In a week or two, I'll make having a GCStrategy be required for gc.statepoints. To this end, I added the gc tag to one of the test cases but not others.
Differential Revision: http://reviews.llvm.org/D6808
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225365 91177308-0d34-0410-b5e6-96231b3b80d8
Many places reference MVT::LAST_VALUETYPE when iterating over all
valid MVTs, but they usually start with 0.
With FIRST_VALUETYPE, we can avoid explicit constants when we really
should be using MVT::SimpleValueType.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225362 91177308-0d34-0410-b5e6-96231b3b80d8
Used to iterate over previously added memory dependencies in
adjustChainDeps() and iterateChainSucc().
SDep::isCtrl() was previously used in these places, that also gave
anti and output edges. The code may be worse if these are followed,
because MisNeedChainEdge() will conservatively return true since a
non-memory instruction has no memory operands, and a false chain dep
will be added. It is also unnecessary since all memory accesses of
interest will be reached by memory dependencies, and there is a budget
limit for the number of edges traversed.
This problem was found on an out-of-tree target with enabled alias
analysis. No test case for an in-tree target has been found.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225351 91177308-0d34-0410-b5e6-96231b3b80d8
requiring and invalidating specific analyses. Also make their printed
names match their class names. Writing these out as prose really doesn't
make sense to me any more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225346 91177308-0d34-0410-b5e6-96231b3b80d8
r221973 changed SmallVector::operator[] to use size_t instead of unsigned.
Before that, on 64bit platforms, when a large index (say -1) was passed,
truncating it to unsigned avoided an overflow when computing 'begin() + idx',
and failed the range checking assertion, as expected.
With r221973, idx isn't truncated, so the addition wraps to
'(char*)begin() - 1', and doesn't fire anymore when it should have done so.
This commit changes the comparison to instead compute 'end() - begin()'
(i.e., 'size()'), which avoids potentially overflowing additions, and
correctly triggers the assertion when values such as -1 are passed.
Note that the problem already existed before that revision, on platforms
where sizeof(size_t) == sizeof(unsigned).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225338 91177308-0d34-0410-b5e6-96231b3b80d8
We can't drop support for RAUW entirely in `MDNode`s, since it's
required for graph construction. This comment was from before I'd done
the math on that (out-of-tree), and never should have been committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225334 91177308-0d34-0410-b5e6-96231b3b80d8
passes too many time.
I think this is actually the issue that someone raised with me at the
developer's meeting and in an email, but that we never really got to the
bottom of. Having all the testing utilities made it much easier to dig
down and uncover the core issue.
When a pass manager is running many passes over a single function, we
need it to invalidate the analyses between each run so that they can be
re-computed as needed. We also need to track the intersection of
preserved higher-level analyses across all the passes that we run (for
example, if there is one module analysis which all the function analyses
preserve, we want to track that and propagate it). Unfortunately, this
interacted poorly with any enclosing pass adaptor between two IR units.
It would see the intersection of preserved analyses, and need to
invalidate any other analyses, but some of the un-preserved analyses
might have already been invalidated *and recomputed*! We would fail to
propagate the fact that the analysis had already been invalidated.
The solution to this struck me as really strange at first, but the more
I thought about it, the more natural it seemed. After a nice discussion
with Duncan about it on IRC, it seemed even nicer. The idea is that
invalidating an analysis *causes* it to be preserved! Preserving the
lack of result is trivial. If it is recomputed, great. Until something
*else* invalidates it again, we're good.
The consequence of this is that the invalidate methods on the analysis
manager which operate over many passes now consume their
PreservedAnalyses object, update it to "preserve" every analysis pass to
which it delivers an invalidation (regardless of whether the pass
chooses to be removed, or handles the invalidation itself by updating
itself). Then we return this augmented set from the invalidate routine,
letting the pass manager take the result and use the intersection of
*that* across each pass run to compute the final preserved set. This
accounts for all the places where the early invalidation of an analysis
has already "preserved" it for a future run.
I've beefed up the testing and adjusted the assertions to show that we
no longer repeatedly invalidate or compute the analyses across nested
pass managers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225333 91177308-0d34-0410-b5e6-96231b3b80d8
WillNotOverflowUnsignedAdd's smarts will live in ValueTracking as
computeOverflowForUnsignedAdd. It now returns a tri-state result:
never overflows, always overflows and sometimes overflows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225329 91177308-0d34-0410-b5e6-96231b3b80d8
This is affecting the behavior of some ObjC++ / AArch64 test cases on Darwin.
Reverting to get the bots green while I track down the source of the changed
behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225311 91177308-0d34-0410-b5e6-96231b3b80d8
The goal is to allows MachineFunctionInfo to override this create
function to customize the creation.
No change intended in existing backend in this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225292 91177308-0d34-0410-b5e6-96231b3b80d8
This will be used for AMD GPUs with the Graphics Core Next architecture,
which are currently using by the r600 triple.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225276 91177308-0d34-0410-b5e6-96231b3b80d8
Use this to test that path of invalidation. This test actually shows
redundant invalidation here that is really bad. I'm going to work on
fixing that next, but wanted to commit the test harness now that its all
working.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225257 91177308-0d34-0410-b5e6-96231b3b80d8
a specific analysis result.
This is quite handy to test things, and will also likely be very useful
for debugging issues. You could narrow down pass validation failures by
walking these invalidate pass runs up and down the pass pipeline, etc.
I've added support to the pass pipeline parsing to be able to create one
of these for any analysis pass desired.
Just adding this class uncovered one latent bug where the
AnalysisManager CRTP base class had a hard-coded Module type rather than
using IRUnitT.
I've also added tests for invalidation and caching of analyses in
a basic way across all the pass managers. These in turn uncovered two
more bugs where we failed to correctly invalidate an analysis -- its
results were invalidated but the key for re-running the pass was never
cleared and so it was never re-run. Quite nasty. I'm very glad to debug
this here rather than with a full system.
Also, yes, the naming here is horrid. I'm going to update some of the
names to be slightly less awful shortly. But really, I've no "good"
ideas for naming. I'll be satisfied if I can get it to "not bad".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225246 91177308-0d34-0410-b5e6-96231b3b80d8
is a no-op other than requiring some analysis results be available.
This can be used in real pass pipelines to force the usually lazy
analysis running to eagerly compute something at a specific point, and
it can be used to test the pass manager infrastructure (my primary use
at the moment).
I've also added bit of pipeline parsing magic to support generating
these directly from the opt command so that you can directly use these
when debugging your analysis. The syntax is:
require<analysis-name>
This can be used at any level of the pass manager. For example:
cgscc(function(require<my-analysis>,no-op-function))
This would produce a no-op function pass requiring my-analysis, followed
by a fully no-op function pass, both of these in a function pass manager
which is nested inside of a bottom-up CGSCC pass manager which is in the
top-level (implicit) module pass manager.
I have zero attachment to the particular syntax I'm using here. Consider
it a straw man for use while I'm testing and fleshing things out.
Suggestions for better syntax welcome, and I'll update everything based
on any consensus that develops.
I've used this new functionality to more directly test the analysis
printing rather than relying on the cgscc pass manager running an
analysis for me. This is still minimally tested because I need to have
analyses to run first! ;] That patch is next, but wanted to keep this
one separate for easier review and discussion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225236 91177308-0d34-0410-b5e6-96231b3b80d8
dsymutil would like to use all the AsmPrinter/MCStreamer infrastructure
to stream out the DWARF. In order to do so, it will reuse the DIE object
and so this header needs to be public.
The interface exposed here has some corners that cannot be used without a
DwarfDebug object, but clients that want to stream Dwarf can just avoid
these.
Differential Revision: http://reviews.llvm.org/D6695
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225208 91177308-0d34-0410-b5e6-96231b3b80d8
when all are being preserved.
We want to short-circuit this for a couple of reasons. One, I don't
really want passes to grow a dependency on actually receiving their
invalidate call when they've been preserved. I'm thinking about removing
this entirely. But more importantly, preserving everything is likely to
be the common case in a lot of scenarios, and it would be really good to
bypass all of the invalidation and preservation machinery there.
Avoiding calling N opaque functions to try to invalidate things that are
by definition still valid seems important. =]
This wasn't really inpsired by much other than seeing the spam in the
logging for analyses, but it seems better ot get it checked in rather
than forgetting about it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225163 91177308-0d34-0410-b5e6-96231b3b80d8
manager.
This starts to allow us to test analyses more easily, but it's really
only the beginning. Some of the code here is still untestable without
manual changes to create analysis passes, but I wanted to factor it into
a small of chunks as possible.
Next up in order to be able to test things are, in no particular order:
- No-op analyses passes so we don't have to use real ones to exercise
the pass maneger itself.
- Automatic way of generating dummy passes that require an analysis be
run, including a variant that calls a 'print' method on a pass to make
it even easier to print out the results of an analysis.
- Dummy passes that invalidate all analyses for their IR unit so we can
test invalidation and re-runs.
- Automatic way to print each analysis pass as it is re-run.
- Automatic but optional verification of analysis passes everywhere
possible.
I'm not claiming I'll get to all of these immediately, but that's what
is in the pipeline at some stage. I'm fleshing out exactly what I need
and what to prioritize by working on converting analyses and then trying
to test the conversion. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225162 91177308-0d34-0410-b5e6-96231b3b80d8
renaming a file from AssumptionTracker.h to AssumptionCache.h.
Thanks to Philip Reames for noticing and pointing it out in code review!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225146 91177308-0d34-0410-b5e6-96231b3b80d8
units.
This was debated back and forth a bunch, but using references is now
clearly cleaner. Of all the code written using pointers thus far, in
only one place did it really make more sense to have a pointer. In most
cases, this just removes immediate dereferencing from the code. I think
it is much better to get errors on null IR units earlier, potentially
at compile time, than to delay it.
Most notably, the legacy pass manager uses references for its routines
and so as more and more code works with both, the use of pointers was
likely to become really annoying. I noticed this when I ported the
domtree analysis over and wrote the entire thing with references only to
have it fail to compile. =/ It seemed better to switch now than to
delay. We can, of course, revisit this is we learn that references are
really problematic in the API.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225145 91177308-0d34-0410-b5e6-96231b3b80d8
a cache of assumptions for a single function, and an immutable pass that
manages those caches.
The motivation for this change is two fold. Immutable analyses are
really hacks around the current pass manager design and don't exist in
the new design. This is usually OK, but it requires that the core logic
of an immutable pass be reasonably partitioned off from the pass logic.
This change does precisely that. As a consequence it also paves the way
for the *many* utility functions that deal in the assumptions to live in
both pass manager worlds by creating an separate non-pass object with
its own independent API that they all rely on. Now, the only bits of the
system that deal with the actual pass mechanics are those that actually
need to deal with the pass mechanics.
Once this separation is made, several simplifications become pretty
obvious in the assumption cache itself. Rather than using a set and
callback value handles, it can just be a vector of weak value handles.
The callers can easily skip the handles that are null, and eventually we
can wrap all of this up behind a filter iterator.
For now, this adds boiler plate to the various passes, but this kind of
boiler plate will end up making it possible to port these passes to the
new pass manager, and so it will end up factored away pretty reasonably.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225131 91177308-0d34-0410-b5e6-96231b3b80d8
The existing code provided for specifying a global loop alignment preference.
However, the preferred loop alignment might depend on the loop itself. For
recent POWER cores, loops between 5 and 8 instructions should have 32-byte
alignment (while the others are better with 16-byte alignment) so that the
entire loop will fit in one i-cache line.
To support this, getPrefLoopAlignment has been made virtual, and can be
provided with an optional MachineLoop* so the target can inspect the loop
before answering the query. The default behavior, as before, is to return the
value set with setPrefLoopAlignment. MachineBlockPlacement now queries the
target for each loop instead of only once per function. There should be no
functional change for other targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225117 91177308-0d34-0410-b5e6-96231b3b80d8
FunctionPassManager. These never got documented, likely due to the
clutter of this header file. This fixes another problem people noticed
when they started trying to use the new pass manager.
I've also used this to document the aspirational constraints I would
like to hold passes to. I don't really have a better place to document
such things at this point, but eventually will probably create a proper
.rst file and page for the LLVM pass infrastructure that carries such
high-level concerns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225097 91177308-0d34-0410-b5e6-96231b3b80d8
concept-based polymorphism in the pass manager to a separate header.
I got feedback from someone reading the code and trying to use it that
this was really making it hard to dive in and start using these APIs and
that makes a lot of sense.
This only requires a moderate amount of gymnastics to separate in this
way, namely rinsing the PreservedAnalysis object through a template
argument in a few places so that it is dependent and we only examine it
on instantiation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225094 91177308-0d34-0410-b5e6-96231b3b80d8
WillNotOverflowUnsignedMul's smarts will live in ValueTracking as
computeOverflowForUnsignedMul. It now returns a tri-state result:
never overflows, always overflows and sometimes overflows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225076 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r225059. I think MSVC 2012 has a problem with this. This is
an attempt to fix one of the MSVC 2012 bots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225065 91177308-0d34-0410-b5e6-96231b3b80d8
This appears to have broken at least the windows build bots due to
compile errors in the predicate that didn't simply supress the overload.
I'm not sure what the fix is, and the bots have been broken for a long
time now so I'm just reverting until Michael can figure out a fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225064 91177308-0d34-0410-b5e6-96231b3b80d8
The issues was that AArch64 has additional restrictions on when local
relocations can be used. We have to take those into consideration when
deciding to put a L symbol in the symbol table or not.
Original message:
Remove doesSectionRequireSymbols.
In an assembly expression like
bar:
.long L0 + 1
the intended semantics is that bar will contain a pointer one byte past L0.
In sections that are merged by content (strings, 4 byte constants, etc), a
single position in the section doesn't give the linker enough information.
For example, it would not be able to tell a relocation must point to the
end of a string, since that would look just like the start of the next.
The solution used in ELF to use relocation with symbols if there is a non-zero
addend.
In MachO before this patch we would just keep all symbols in some sections.
This would miss some cases (only cstrings on x86_64 were implemented) and was
inefficient since most relocations have an addend of 0 and can be represented
without the symbol.
This patch implements the non-zero addend logic for MachO too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225048 91177308-0d34-0410-b5e6-96231b3b80d8
Under the large code model, we cannot assume that __morestack lives within
2^31 bytes of the call site, so we cannot use pc-relative addressing. We
cannot perform the call via a temporary register, as the rax register may
be used to store the static chain, and all other suitable registers may be
either callee-save or used for parameter passing. We cannot use the stack
at this point either because __morestack manipulates the stack directly.
To avoid these issues, perform an indirect call via a read-only memory
location containing the address.
This solution is not perfect, as it assumes that the .rodata section
is laid out within 2^31 bytes of each function body, but this seems to
be sufficient for JIT.
Differential Revision: http://reviews.llvm.org/D6787
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225003 91177308-0d34-0410-b5e6-96231b3b80d8
In an assembly expression like
bar:
.long L0 + 1
the intended semantics is that bar will contain a pointer one byte past L0.
In sections that are merged by content (strings, 4 byte constants, etc), a
single position in the section doesn't give the linker enough information.
For example, it would not be able to tell a relocation must point to the
end of a string, since that would look just like the start of the next.
The solution used in ELF to use relocation with symbols if there is a non-zero
addend.
In MachO before this patch we would just keep all symbols in some sections.
This would miss some cases (only cstrings on x86_64 were implemented) and was
inefficient since most relocations have an addend of 0 and can be represented
without the symbol.
This patch implements the non-zero addend logic for MachO too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224985 91177308-0d34-0410-b5e6-96231b3b80d8
Nothing particularly interesting, just adding infrastructure for use by in tree users and out of tree users.
Note: These were extracted out of a working frontend, but they have not been well tested in isolation.
Differential Revision: http://reviews.llvm.org/D6807
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224981 91177308-0d34-0410-b5e6-96231b3b80d8
This change implements four basic optimizations:
If a relocated value isn't used, it doesn't need to be relocated.
If the value being relocated is null, relocation doesn't change that. (Technically, this might be collector specific. I don't know of one which it doesn't work for though.)
If the value being relocated is undef, the relocation is meaningless.
If the value being relocated was known nonnull, the relocated pointer also isn't null. (Since it points to the same source language object.)
I outlined other planned work in comments.
Differential Revision: http://reviews.llvm.org/D6600
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224968 91177308-0d34-0410-b5e6-96231b3b80d8
a CLANG_LIBDIR_SUFFIX variable. This is necessary before I can add
support for using that variable to CMake and the C++ code in Clang, and
the autoconf build system does all substitutions in the LLVM tree.
As mentioned before, I'm not planning to add actual multilib support to
the autoconf build, just enough stubs for it to keep playing nicely with
the CMake build once that one has support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224922 91177308-0d34-0410-b5e6-96231b3b80d8
If the control flow is modelling an if-statement where the only instruction in
the 'then' basic block (excluding the terminator) is a call to cttz/ctlz,
CodeGenPrepare can try to speculate the cttz/ctlz call and simplify the control
flow graph.
Example:
\code
entry:
%cmp = icmp eq i64 %val, 0
br i1 %cmp, label %end.bb, label %then.bb
then.bb:
%c = tail call i64 @llvm.cttz.i64(i64 %val, i1 true)
br label %end.bb
end.bb:
%cond = phi i64 [ %c, %then.bb ], [ 64, %entry]
\code
In this example, basic block %then.bb is taken if value %val is not zero.
Also, the phi node in %end.bb would propagate the size-of in bits of %val
only if %val is equal to zero.
With this patch, CodeGenPrepare will try to hoist the call to cttz from %then.bb
into basic block %entry only if cttz is cheap to speculate for the target.
Added two new hooks in TargetLowering.h to let targets customize the behavior
(i.e. decide whether it is cheap or not to speculate calls to cttz/ctlz). The
two new methods are 'isCheapToSpeculateCtlz' and 'isCheapToSpeculateCttz'.
By default, both methods return 'false'.
On X86, method 'isCheapToSpeculateCtlz' returns true only if the target has
LZCNT. Method 'isCheapToSpeculateCttz' only returns true if the target has BMI.
Differential Revision: http://reviews.llvm.org/D6728
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224899 91177308-0d34-0410-b5e6-96231b3b80d8
.set directives may be overridden by other .set directives as well as
label definitions.
This fixes PR22019.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224811 91177308-0d34-0410-b5e6-96231b3b80d8