A second binutils feature needed to support ELFv2 is the .localentry
directive. In the ELFv2 ABI, functions may have two entry points:
one for calling the routine locally via "bl", and one for calling the
function via function pointer (either at the source level, or implicitly
via a PLT stub for global calls). The two entry points share a single
ELF symbol, where the ELF symbol address identifies the global entry
point address, while the local entry point is found by adding a delta
offset to the symbol address. That offset is encoded into three
platform-specific bits of the ELF symbol st_other field.
The .localentry directive instructs the assembler to set those fields
to encode a particular offset. This is typically used by a function
prologue sequence like this:
func:
addis r2, r12, (.TOC.-func)@ha
addi r2, r2, (.TOC.-func)@l
.localentry func, .-func
Note that according to the ABI, when calling the global entry point,
r12 must be set to point the global entry point address itself; while
when calling the local entry point, r2 must be set to point to the TOC
base. The two instructions between the global and local entry point in
the above example translate the first requirement into the second.
This patch implements support in the PowerPC MC streamers to emit the
.localentry directive (both into assembler and ELF object output), as
well as support in the assembler parser to parse that directive.
In addition, there is another change required in MC fixup/relocation
handling to properly deal with relocations targeting function symbols
with two entry points: When the target function is known local, the MC
layer would immediately handle the fixup by inserting the target
address -- this is wrong, since the call may need to go to the local
entry point instead. The GNU assembler handles this case by *not*
directly resolving fixups targeting functions with two entry points,
but always emits the relocation and relies on the linker to handle
this case correctly. This patch changes LLVM MC to do the same (this
is done via the processFixupValue routine).
Similarly, there are cases where the assembler would normally emit a
relocation, but "simplify" it to a relocation targeting a *section*
instead of the actual symbol. For the same reason as above, this
may be wrong when the target symbol has two entry points. The GNU
assembler again handles this case by not performing this simplification
in that case, but leaving the relocation targeting the full symbol,
which is then resolved by the linker. This patch changes LLVM MC
to do the same (via the needsRelocateWithSymbol routine).
NOTE: The method used in this patch is overly pessimistic, since the
needsRelocateWithSymbol routine currently does not have access to the
actual target symbol, and thus must always assume that it might have
two entry points. This will be improved upon by a follow-on patch
that modifies common code to pass the target symbol when calling
needsRelocateWithSymbol.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213485 91177308-0d34-0410-b5e6-96231b3b80d8
ELFv2 binaries are marked by a bit in the ELF header e_flags field.
A new assembler directive .abiversion can be used to set that flag.
This patch implements support in the PowerPC MC streamers to emit the
.abiversion directive (both into assembler and ELF binary output),
as well as support in the assembler parser to parse the .abiversion
directive.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213484 91177308-0d34-0410-b5e6-96231b3b80d8
When handling an incoming byval argument, we need to possibly write
incoming registers to the stack in order to create an on-stack image
of the parameter, so we can return its address to common code.
This currently uses CreateFixedObject to access the parts of the
parameter save area where the argument is (or needs to be) stored.
However, sometimes we need to access multiple parts of that area,
e.g. to write multiple registers. The code currently uses a new
CreateFixedObject call for each of these accesses, resulting in
a patchwork of overlapping (fixed) stack objects.
This doesn't really matter in the case of fixed objects, since
any access to those turns into a fixed stackpointer + offset
address anyway. However, with the upcoming ELFv2 patches, we
may actually need to place an incoming argument into our *own*
stack frame instead of the caller's. This means we need to use
CreateStackObject instead, and we cannot have multiple overlapping
instances of those.
To make the rest of the argument handling code work equally in
both situations, this patch refactors it to always use just a
single call to CreateFixedObject, and access parts of that object
as required using address arithmetic. This way, we can in a future
patch substitute CreateStackObject without further changes.
No change to generated code intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213483 91177308-0d34-0410-b5e6-96231b3b80d8
The PPCTargetLowering::SelectAddressRegImm routine needs to handle
FrameIndex nodes in a special manner, by tranlating them into a
TargetFrameIndex node. This was done in most cases, but seems to
have been neglected in one path: when the input tree has an OR of
the FrameIndex with an immediate. This can happen if the FrameIndex
can be proven to be sufficiently aligned that an OR of that immediate
is equivalent to an ADD.
The missing handling of FrameIndex in that case caused the SelectionDAG
instruction selection to miss opportunities to merge the OR back into
the FrameIndex node, leading to superfluous addi/ori instructions in
the final assembler output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213482 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This patch introduces two new iterator ranges and updates existing code to use it. No functional change intended.
Test Plan: All tests (make check-all) still pass.
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4481
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213474 91177308-0d34-0410-b5e6-96231b3b80d8
This probably was killed by some generic DAGCombiner
improvements in checking the TargetBooleanContents instead
of just 1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213471 91177308-0d34-0410-b5e6-96231b3b80d8
Also removes an unnecessary '.release()' that should've been a std::move
anyway. (I'm on a hunt for '.release()' calls)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213464 91177308-0d34-0410-b5e6-96231b3b80d8
This adds an optional parameter to the EmitSymbolValue method in MCStreamer to
permit emitting a symbol value as a section relative value. This is to cover
the use in MCDwarf which should not really know about how to emit a section
relative value for a given target.
This addresses post-review comments from Eric Christopher in SVN r213275.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213463 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions can only take a limited input range, and return
the constant value 1 out of range. We should do range reduction to
be able to process arbitrary values. Use a FRACT instruction after
normalization to achieve this. Also add a test for constant folding
with the lowered code with unsafe-fp-math enabled.
v2: use DAG lowering instead of intrinsic, adapt test
v3: calculate constant, fold pattern into instruction definition
v4: misc style fixes, add sin-fold testcase, cosmetics
Patch by Grigori Goronzy
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213458 91177308-0d34-0410-b5e6-96231b3b80d8
IRBuilder has CreateAligned(Load|Store) functions; use them and we don't need
to make a second call to setAlignment.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213453 91177308-0d34-0410-b5e6-96231b3b80d8
There are some kinds of metadata that are safe to propagate from the scalar
instructions to the vector instructions (fpmath and tbaa currently).
Regarding TBAA, one might worry about propagating it on if-converted loads and
stores, because the metadata might have had a control dependency on the
condition, and thus actually aliased with some other non-speculated memory
access when the condition was false. However, this would be caught by the
runtime overlap checks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213452 91177308-0d34-0410-b5e6-96231b3b80d8
All of the other similar functions in that part of the file look through
addrspacecast in addition to bitcast, and I see no reason why
stripAndAccumulateInBoundsConstantOffsets shouldn't do so also.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213449 91177308-0d34-0410-b5e6-96231b3b80d8
When we have a parameter (or call site return) with a dereferenceable
attribute, it can specify the size of an array pointed to by that parameter. If
we have a value for which we can accumulate a constant offset to such a
parameter, then we can use that offset in a direct comparison with the size
specified by the dereferenceable attribute.
This enables us to handle cases like this:
int foo(int a[static 3]) {
return a[2]; /* this is always dereferenceable */
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213447 91177308-0d34-0410-b5e6-96231b3b80d8
When performing a dynamic stack adjustment without optimisations, we would mark
SP as def and R4 as kill. This occurred as part of the expansion of a
WIN__CHKSTK SDNode which indicated the proper handling of SP and R4. The result
would be that we would double define SP as part of an operation, which is
obviously incorrect.
Furthermore, the VTList for the chain had an incorrect parameter type of i32
instead of Other.
Correct these to permit proper lowering of __builtin_alloca at -O0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213442 91177308-0d34-0410-b5e6-96231b3b80d8
It's also possible to just write "= nullptr", but there's some question
of whether that's as readable, so I leave it up to authors to pick which
they prefer for now. If we want to discuss standardizing on one or the
other, we can do that at some point in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213438 91177308-0d34-0410-b5e6-96231b3b80d8
getBasicRelocationEntry to use this rather than 'memcpy' to get the
relocation addend. Targets with non-trivial addend encodings (E.g. AArch64) can
override decodeAddend to handle immediates with interesting encodings.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213435 91177308-0d34-0410-b5e6-96231b3b80d8
a) Move the replacement level decision to the target machine.
b) Create additional subtargets at the TargetMachine level to
cache and make replacement easy.
c) Make the mips16 features obvious.
d) Remove the override logic as it no longer does anything.
e) Have MipsModuleDAGToDAGISel take only the target machine.
f) Have the constant islands pass grab the current subtarget
from the MachineFunction (via the TargetMachine) instead
of caching it.
g) Unconditionally initialize TLOF.
h) Remove the old complicated subtarget based resetting and
replace it with simple conditionals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213430 91177308-0d34-0410-b5e6-96231b3b80d8
This adds initial support for PPC32 ELF PIC (Position Independent Code; the
-fPIC variety), thus rectifying a long-standing deficiency in the PowerPC
backend.
Patch by Justin Hibbits!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213427 91177308-0d34-0410-b5e6-96231b3b80d8
two reasons:
a) we're already caching the target machine which contains it,
b) which relocation model you get is dependent upon whether or
not you ask before MCCodeGenInfo is constructed on the target
machine, so avoid any latent issues there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213420 91177308-0d34-0410-b5e6-96231b3b80d8
RelocationEntry.
No test case yet, as this primarily hits GOT entries, which RuntimeDyldChecker
can't examine yet. I'm actively working on features that will enable us to
test this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213408 91177308-0d34-0410-b5e6-96231b3b80d8
Merges equivalent loads on both sides of a hammock/diamond
and hoists into into the header.
Merges equivalent stores on both sides of a hammock/diamond
and sinks it to the footer.
Can enable if conversion and tolerate better load misses
and store operand latencies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213396 91177308-0d34-0410-b5e6-96231b3b80d8
Recommits 212776 which was reverted in r212793. This has been committed
and recommitted a few times as I try to test it harder and find/fix more
issues. The most recent revert was due to an asan bot failure which I
can't seem to reproduce locally, though I believe I'm following all the
steps the buildbot does.
So I'm going to recommit this in the hopes of investigating the failure
on the buildbot itself... apologies in advance for the bot noise. If
anyone sees failures with this /please/ provide me with any
reproductions, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213391 91177308-0d34-0410-b5e6-96231b3b80d8
On AArch64 the pseudo instruction ldr <reg>, =... supports both
32-bit and 64-bit constants. Add support for 64 bit constants for
the pools to support the pseudo instruction fully.
Changes the AArch64 ldr-pseudo tests to use 32-bit registers and
adds tests with 64-bit registers.
Patch by Janne Grunau!
Differential Revision: http://reviews.llvm.org/D4279
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213387 91177308-0d34-0410-b5e6-96231b3b80d8
This attribute indicates that the parameter or return pointer is
dereferenceable. Practically speaking, loads from such a pointer within the
associated byte range are safe to speculatively execute. Such pointer
parameters are common in source languages (C++ references, for example).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213385 91177308-0d34-0410-b5e6-96231b3b80d8