Turn on -Wunused and -Wno-unused-parameter. Clean up most of the resulting
fall out by removing unused variables. Remaining warnings have to do with
unused functions (I didn't want to delete code without review) and unused
variables in generated code. Maintainers should clean up the remaining
issues when they see them. All changes pass DejaGnu tests and Olden.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31380 91177308-0d34-0410-b5e6-96231b3b80d8
way to reach the load via any nodes that would be folded. Start from the
root of the matched sub-tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30956 91177308-0d34-0410-b5e6-96231b3b80d8
chain operand to point to the load being folded. Now we relax this, traversing
up the chain, if it doesn't reach the load, then it's ok. We will create a
TokenFactor (of all the chain operands and the load's chain) to capture all
the control flow dependencies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30897 91177308-0d34-0410-b5e6-96231b3b80d8
The dag/inst combiners often 'simplify' the masked value based on whether
or not the bits are live or known zero/one. This is good and dandy, but
often causes special case patterns to fail, such as alpha's CMPBGE pattern,
which looks like "(set GPRC:$RC, (setuge (and GPRC:$RA, 255), (and GPRC:$RB, 255)))".
Here the pattern for (and X, 255) should match actual dags like (and X, 254) if
the dag combiner proved that the missing bits are already zero (one for 'or').
For CodeGen/Alpha/cmpbge.ll:test2 for example, this results in:
sll $16,1,$0
cmpbge $0,$17,$0
ret $31,($26),1
instead of:
sll $16,1,$0
and $0,254,$0
and $17,255,$1
cmpule $1,$0,$0
ret $31,($26),1
... and requires no target-specific code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30871 91177308-0d34-0410-b5e6-96231b3b80d8
AggregateString += "\0\0";
Doesn't add two nuls to the AggregateString (for obvious reasons), which
broke the asmprinter when the first character of an asm string was not
literal text.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30625 91177308-0d34-0410-b5e6-96231b3b80d8
has no associated operand. This is useful for portably encoding stuff like
the comment character into an asm string.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30617 91177308-0d34-0410-b5e6-96231b3b80d8
the branch's chain is also produced by cmp.
[ch, r : ld]
^ ^
| |
[XX]--/ \- [flag : cmp]
^ ^
| |
\---[br flag]-
Remove an isel check which prevents loads from being folded into cmp / test
instructions.
2) Whenever possible, delete a selected node to allow more load folding
opportunities. Note not all nodes can be deleted after it has been
selected. Some may have simply morphed; some have not changed at all (e.g.
EntryToken).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30242 91177308-0d34-0410-b5e6-96231b3b80d8
actually *removes* one of the operands, instead of just assigning both operands
the same register. This make reasoning about instructions unnecessarily complex,
because you need to know if you are before or after register allocation to match
up operand #'s with the target description file.
Changing this also gets rid of a bunch of hacky code in various places.
This patch also includes changes to fold loads into cmp/test instructions in
the X86 backend, along with a significant simplification to the X86 spill
folding code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30108 91177308-0d34-0410-b5e6-96231b3b80d8
- Clean up the code generated by tablegen:
* AddToISelQueue now takes one argument.
* ComplexPattern matching condition can now be shared.
* Eliminate passing unnecessary arguments to emit routines.
* Eliminate some unneeded SDOperand declarations in select routines.
* Other minor clean ups.
- This reduces foot print slightly: X86ISelDAGToDAG.o is reduced from 971k
to 823k.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29892 91177308-0d34-0410-b5e6-96231b3b80d8
version to be left blank if the build failed.
Also corrected a problem where if the build failed the nightly tester
would still try to read the results of the Dejagnutests log even
though it didnt exist.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29829 91177308-0d34-0410-b5e6-96231b3b80d8
source dir for LLVM to be specified explicitly. This removes the dependency
on the llvm-config script. If the option is not given, then the scripts use
llvm-config which should be both built and in the PATH. This arrangement
provides a useful default for most developers but also allows the nightly
tester to execute countloc.sh before llvm-config is built and without
altering the PATH.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29663 91177308-0d34-0410-b5e6-96231b3b80d8
are considered to be code. This will give a drop in the LOC count on the
nightly testers, but it is more accurate than previous estimates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29653 91177308-0d34-0410-b5e6-96231b3b80d8
1. Remove tabs
2. Wrap to 80 columns
3. Put spaces between "if" or "elsif" and expression
4. Put { on same line as if statement.
5. Make indentation be 2 spaces.
Functionality change:
Run utils/countloc.sh after the build is done. This is necessary because
that script now uses llvm-config to find the top src directory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29651 91177308-0d34-0410-b5e6-96231b3b80d8
the llvm source root from the llvm-config command. The dependency now is
that the correct llvm-config command is in the path. For most developers
this is the case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29630 91177308-0d34-0410-b5e6-96231b3b80d8
particular directory, just pass that directory to the script. Also, clean
up the HTML output, put list of skipped dirs at the end, and make a few
other minor improvements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29620 91177308-0d34-0410-b5e6-96231b3b80d8
introduced by previous commit.
- SelectCode now returns a SDNode*. If it is not null, the selected node
produces the same number of results as the input node. The seletion loop
is responsible for calling ReplaceAllUsesWith() to replace the input node
with the output target node. For other cases, e.g. when load is folded,
the selection code is responsible for calling ReplaceAllUsesOfValueWith()
and SelectCode returns NULL.
- Other clean ups.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29602 91177308-0d34-0410-b5e6-96231b3b80d8
in the start of an array and a count of operands where applicable. In many
cases, the number of operands is known, so this static array can be allocated
on the stack, avoiding the heap. In many other cases, a SmallVector can be
used, which has the same benefit in the common cases.
I updated a lot of code calling getNode that takes a vector, but ran out of
time. The rest of the code should be updated, and these methods should be
removed.
We should also do the same thing to eliminate the methods that take a
vector of MVT::ValueTypes.
It would be extra nice to convert the dagiselemitter to avoid creating vectors
for operands when calling getTargetNode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29566 91177308-0d34-0410-b5e6-96231b3b80d8
