This change resubmits the patch that broke the build, this time
without unittests. The unittests will be submitted separately
after the problem has been addressed:
--Original Commit Message--
Create lib/DebugInfo/PDB.
This patch creates a platform-independent interface to a PDB reader.
There is currently no implementation of this interface, which will
be provided in future patches. This defines the basic object model
which any implementation must conform to.
Reviewed by: David Blaikie
Differential Revision: http://reviews.llvm.org/D7356
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228435 91177308-0d34-0410-b5e6-96231b3b80d8
If complete-unroll could help us to optimize away N% of instructions, we
might want to do this even if the final size would exceed loop-unroll
threshold. However, we don't want to unroll huge loop, and we are add
AbsoluteThreshold to avoid that - this threshold will never be crossed,
even if we expect to optimize 99% instructions after that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228434 91177308-0d34-0410-b5e6-96231b3b80d8
It is a variation of SimplifyBinOp, but it takes into account
FastMathFlags.
It is needed in inliner and loop-unroller to accurately predict the
transformation's outcome (previously we dropped the flags and were too
conservative in some cases).
Example:
float foo(float *a, float b) {
float r;
if (a[1] * b)
r = /* a lot of expensive computations */;
else
r = 1;
return r;
}
float boo(float *a) {
return foo(a, 0.0);
}
Without this patch, we don't inline 'foo' into 'boo'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228432 91177308-0d34-0410-b5e6-96231b3b80d8
This patch creates a platform-independent interface to a PDB reader.
There is currently no implementation of this interface, which will
be provided in future patches. This defines the basic object model
which any implementation must conform to.
Reviewed by: David Blaikie
Differential Revision: http://reviews.llvm.org/D7356
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228428 91177308-0d34-0410-b5e6-96231b3b80d8
This is a more sensible home for SectionMemoryManager, and allows the implementation
to be shared between Orc and MCJIT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228427 91177308-0d34-0410-b5e6-96231b3b80d8
This was a trivial think-o, but it's in a method of a templated class
and doesn't have any callers yet, so the compiler let it pass. I hope
to add a unit test to cover this soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228425 91177308-0d34-0410-b5e6-96231b3b80d8
by using a segment set.
The patch addresses a compile-time performance regression in the LiveIntervals
analysis pass (see http://llvm.org/bugs/show_bug.cgi?id=18580). This regression
is especially critical when compiling long functions. Our analysis had shown
that the most of time is taken for generation of live intervals for physical
registers. Insertions in the middle of the array of live ranges cause quadratic
algorithmic complexity, which is apparently the main reason for the slow-down.
Overview of changes:
- The patch introduces an additional std::set<Segment>* member in LiveRange for
storing segments in the phase of initial creation. The set is used if this
member is not NULL, otherwise everything works the old way.
- The set of operations on LiveRange used during initial creation (i.e. used by
createDeadDefs and extendToUses) have been reimplemented to use the segment
set if it is available.
- After a live range is created the contents of the set are flushed to the
segment vector, because the set is not as efficient as the vector for the
later uses of the live range. After the flushing, the set is deleted and
cannot be used again.
- The set is only for live ranges computed in
LiveIntervalAnalysis::computeLiveInRegUnits() and getRegUnit() but not in
computeVirtRegs(), because I did not bring any performance benefits to
computeVirtRegs() and for some examples even brought a slow down.
Patch by Vaidas Gasiunas <vaidas.gasiunas@sap.com>
Differential Revision: http://reviews.llvm.org/D6013
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228421 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow it to be shared with the new Loop Distribution pass.
getFirstInst is currently duplicated across LoopVectorize.cpp and
LoopAccessAnalysis.cpp. This is a short-term work-around until we figure out
a better solution.
NFC. (The code moved is adjusted a bit for the name of the Loop member and
that PtrRtCheck is now a reference rather than a pointer.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228418 91177308-0d34-0410-b5e6-96231b3b80d8
Normalize
select(C0, select(C1, a, b), b) -> select((C0 & C1), a, b)
select(C0, a, select(C1, a, b)) -> select((C0 | C1), a, b)
This normal form may enable further combines on the And/Or and shortens
paths for the values. Many targets prefer the other but can go back
easily in CodeGen.
Differential Revision: http://reviews.llvm.org/D7399
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228409 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-mode was previously confused when variable names contained keywords.
This changes ensures that keywords are only highlighted when they're standalone.
Patch by Wilfred Hughes!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228396 91177308-0d34-0410-b5e6-96231b3b80d8
Doesn't seem necessary anymore. I think this was mostly compensating for
not enabling WQM for texture sampling instructions.
v2: Add test coverage
Reviewed-by: Tom Stellard <tom@stellard.net>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228373 91177308-0d34-0410-b5e6-96231b3b80d8
If whole quad mode isn't enabled for these, the level of detail is
calculated incorrectly for pixels along diagonal triangle edges, causing
artifacts.
v2: Use a TSFlag instead of lots of switch cases
v3: Add test coverage
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88642
Reviewed-by: Tom Stellard <tom@stellard.net>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228372 91177308-0d34-0410-b5e6-96231b3b80d8
Since testing the function indirectly is tricky, introduce a direct
print-memderefs pass, in the same spirit as print-memdeps, which prints
dereferenceability information matched by FileCheck.
Differential Revision: http://reviews.llvm.org/D7075
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228369 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid the creation of select instructions which can result in different
scheduling of the selects.
I also added a bunch of additional store volatiles. Those avoid A
CodeGen problem (bug?) where normalizes and denomarlizing the control
moves all shift instructions into the first block where ISel can't match
them together with the cmps.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228362 91177308-0d34-0410-b5e6-96231b3b80d8
Use FileCheck, make it more consistent and do not rely on unoptimized
or(cmp,cmp) getting combined for max to be matched.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228361 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically:
- Calculate the loop pre-header once at the stat of HoistOutOfLoop, so:
- We don't-DFS walk the MachineDomTree if we aren't going to do anything
- Don't call getCurPreheader for each Scope
- Don't needlessly use a do-while loop
- Use early exit for Scopes.size() == 0
No functional changes intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228350 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR22462: two of the tests have regressed for a while,
but were using CHECK-NOT to match "May:". The actual output
was changed to "MayAlias:" at some point, which made the tests
useless.
Two others return MayAlias only because of a lack of analysis;
BasicAA returns PartialAlias in those cases, when a datalayout
is present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228346 91177308-0d34-0410-b5e6-96231b3b80d8
By default, store all local variables in dynamic alloca instead of
static one. It reduces the stack space usage in use-after-return mode
(dynamic alloca will not be called if the local variables are stored
in a fake stack), and improves the debug info quality for local
variables (they will not be described relatively to %rbp/%rsp, which
are assumed to be clobbered by function calls).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228336 91177308-0d34-0410-b5e6-96231b3b80d8
PassManager instance. In one case we can make the determination
from the Triple, in the other (execution dependency pass) the
pass will avoid running if we don't have any code that uses that
register class so go ahead and add it to the pipeline.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228334 91177308-0d34-0410-b5e6-96231b3b80d8
dealing with module level emission. Currently this is using
the Triple to determine, but eventually the logic should
probably migrate to TLOF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228332 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC supports pre-increment load/store instructions (except for Altivec/VSX
vector load/stores). Using these on embedded cores can be very important, but
most loops are not naturally set up to use them. We can often change that,
however, by placing loops into a non-canonical form. Generically, this means
transforming loops like this:
for (int i = 0; i < n; ++i)
array[i] = c;
to look like this:
T *p = array[-1];
for (int i = 0; i < n; ++i)
*++p = c;
the key point is that addresses accessed are pulled into dedicated PHIs and
"pre-decremented" in the loop preheader. This allows the use of pre-increment
load/store instructions without loop peeling.
A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is
introduced to perform this transformation. I've used this code out-of-tree for
generating code for the PPC A2 for over a year. Somewhat to my surprise,
running the test suite + externals on a P7 with this transformation enabled
showed no performance regressions, and one speedup:
External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk
-2.32514% +/- 1.03736%
So I'm going to enable it on everything for now. I was surprised by this
because, on the POWER cores, these pre-increment load/store instructions are
cracked (and, thus, harder to schedule effectively). But seeing no regressions,
and feeling that it is generally easier to split instructions apart late than
it is to combine them late, this might be the better approach regardless.
In the future, we might want to integrate this functionality into LSR (but
currently LSR does not create new PHI nodes, so (for that and other reasons)
significant work would need to be done).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228328 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC supports pre-increment floating-point load/store instructions, both r+r
and r+i, and we had patterns for them, but they were not marked as legal. Mark
them as legal (and add a test case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228327 91177308-0d34-0410-b5e6-96231b3b80d8