This class is meant to be the primary interface for examining a live
range in the vicinity on a given instruction. It avoids all the messy
dealings with iterators and early clobbers.
This is a more abstract interface to live ranges, hiding the
implementation as a vector of segments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157141 91177308-0d34-0410-b5e6-96231b3b80d8
A live range that has an early clobber tied redef now looks like a
normal tied redef, except the early clobber def uses the early clobber
slot.
This is enough to handle any strange interference problems.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149769 91177308-0d34-0410-b5e6-96231b3b80d8
If a value is defined by a COPY, that instuction can easily and cheaply
be found by getInstructionFromIndex(VNI->def).
This reduces the size of VNInfo from 24 to 16 bytes, and improves
llc compile time by 3%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149763 91177308-0d34-0410-b5e6-96231b3b80d8
The old naming scheme (load/use/def/store) can be traced back to an old
linear scan article, but the names don't match how slots are actually
used.
The load and store slots are not needed after the deferred spill code
insertion framework was deleted.
The use and def slots don't make any sense because we are using
half-open intervals as is customary in C code, but the names suggest
closed intervals. In reality, these slots were used to distinguish
early-clobber defs from normal defs.
The new naming scheme also has 4 slots, but the names match how the
slots are really used. This is a purely mechanical renaming, but some
of the code makes a lot more sense now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144503 91177308-0d34-0410-b5e6-96231b3b80d8
The getPrevIndex() function moves to the same slot in the previous
instruction. For getVNInfoBefore(), we just need the previous slot in
the same instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139793 91177308-0d34-0410-b5e6-96231b3b80d8
There is only one legitimate use remaining, in addIntervalsForSpills().
All other calls to hasPHIKill() are only used to update PHIKill flags.
The addIntervalsForSpills() function is part of the old spilling
framework, only used by linearscan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139783 91177308-0d34-0410-b5e6-96231b3b80d8
It is conservatively correct to keep the hasPHIKill flags, even after
deleting PHI-defs.
The calculation can be very expensive after taildup has created a
quadratic number of indirectbr edges in the CFG, and the hasPHIKill flag
isn't used for anything after RenumberValues().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139780 91177308-0d34-0410-b5e6-96231b3b80d8
An improper SlotIndex->VNInfo lookup was leading to unsafe copy removal.
Fixes PR10920 401.bzip2 miscompile with no IV rewrite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139765 91177308-0d34-0410-b5e6-96231b3b80d8
Three out of four clients prefer this interface which is consistent with
extendIntervalEndTo() and LiveRangeCalc::extend().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139604 91177308-0d34-0410-b5e6-96231b3b80d8
When instructions are deleted, they leave tombstone SlotIndex entries.
The isZeroLength method should ignore these null indexes.
This causes RABasic to sometimes spill a callee-saved register in the
abi-isel.ll test, so don't run that test with -regalloc=basic. Prioritizing
register allocation according to spill weight can cause more registers to be
used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131436 91177308-0d34-0410-b5e6-96231b3b80d8
This could happen when trying to use a value that had been eliminated after dead
code elimination and folding loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130597 91177308-0d34-0410-b5e6-96231b3b80d8
This method could probably be used by LiveIntervalAnalysis::shrinkToUses, and
now it can use extendIntervalEndTo() which coalesces ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126803 91177308-0d34-0410-b5e6-96231b3b80d8
The greedy register allocator revealed some problems with the value mapping in
SplitKit. We would sometimes start mapping values before all defs were known,
and that could change a value from a simple 1-1 mapping to a multi-def mapping
that requires ssa update.
The new approach collects all defs and register assignments first without
filling in any live intervals. Only when finish() is called, do we compute
liveness and mapped values. At this time we know with certainty which values map
to multiple values in a split range.
This also has the advantage that we can compute live ranges based on the
remaining uses after rematerializing at split points.
The current implementation has many opportunities for compile time optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124765 91177308-0d34-0410-b5e6-96231b3b80d8
physical register numbers.
This makes the hack used in LiveInterval official, and lets LiveInterval be
oblivious of stack slots.
The isPhysicalRegister() and isVirtualRegister() predicates don't know about
this, so when a variable may contain a stack slot, isStackSlot() should always
be tested first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123128 91177308-0d34-0410-b5e6-96231b3b80d8
connected components. These components should be allocated different virtual
registers because there is no reason for them to be allocated together.
Add the ConnectedVNInfoEqClasses class to calculate the connected components,
and move values to new LiveIntervals.
Use it from SplitKit::rewrite by creating new virtual registers for the
components.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116006 91177308-0d34-0410-b5e6-96231b3b80d8
LiveInterval::MergeValueNumberInto instead of trying to extend LiveRanges and
getting it wrong.
This fixed PR8249 where a valno with a multi-segment live range was defined by
an identity copy created by RemoveCopyByCommutingDef. Some of the live
segments disappeared.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115385 91177308-0d34-0410-b5e6-96231b3b80d8
instead of calling lower_bound or upper_bound directly.
This cleans up the search logic a bit because {lower,upper}_bound compare
LR->start by default, and it is usually simpler to search LR->end.
Funnelling all searches through one function also makes it possible to replace
the search algorithm with something faster than binary search.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114448 91177308-0d34-0410-b5e6-96231b3b80d8
Clobber ranges are no longer used when joining physical registers.
Instead, all aliases are checked for interference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113084 91177308-0d34-0410-b5e6-96231b3b80d8
register at a time. This turns out to be slightly faster than iterating over
instructions, but more importantly, it allows us to compute spill weights for
new registers created after the spill weight pass has run.
Also compute the allocation hint at the same time as the spill weight. This
allows us to use the spill weight as a cost metric for copies, and choose the
most profitable hint if there is more than one possibility.
The new hints provide a very small (< 0.1%) but universal code size improvement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110631 91177308-0d34-0410-b5e6-96231b3b80d8
After heavy editing of a live interval, it is much easier to simply renumber the
live values instead of trying to keep track of the unused ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110463 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to recognize the common case where all uses could be
rematerialized, and no stack slot allocation is necessary.
If some values could be fully rematerialized, remove them from the live range
before allocating a stack slot for the rest.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107492 91177308-0d34-0410-b5e6-96231b3b80d8
The VNInfo.kills vector was almost unused except for all the code keeping it
updated. The few places using it were easily rewritten to check for interval
ends instead.
The two new methods LiveInterval::killedAt and killedInRange are replacements.
This brings us down to 3 independent data structures tracking kills.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106905 91177308-0d34-0410-b5e6-96231b3b80d8
