This speeds up llvm-ar building lib64/libclangSema.a with debug IR files
from 8.658015807 seconds to just 0.351036519 seconds :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232221 91177308-0d34-0410-b5e6-96231b3b80d8
We only defer loading metadata inside ParseModule when ShouldLazyLoadMetadata
is true and we have not loaded any Metadata block yet.
This commit implements all-or-nothing loading of Metadata. If there is a
request to load any metadata block, we will load all deferred metadata blocks.
We make sure the deferred metadata blocks are loaded before we materialize any
function or a module.
The default value of the added parameter ShouldLazyLoadMetadata for
getLazyBitcodeModule is false, so the default behavior stays the same.
We only set the parameter to true when creating LTOModule in local contexts.
These can only really be used for parsing symbols, so it's unnecessary to ever
load the metadata blocks.
If we are going to enable lazy-loading of Metadata for other usages of
getLazyBitcodeModule, where deferred metadata blocks need to be loaded, we can
expose BitcodeReader::materializeMetadata to Module, similar to
Module::materialize.
rdar://19804575
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232198 91177308-0d34-0410-b5e6-96231b3b80d8
While fuzzing LLVM bitcode files, I discovered that (1) the bitcode reader doesn't check that alignments are no larger than 2**29; (2) downstream code doesn't check the range; and (3) for values out of range, corresponding large memory requests (based on alignment size) will fail. This code fixes the bitcode reader to check for valid alignments, fixing this problem.
This CL fixes alignment value on global variables, functions, and instructions: alloca, load, load atomic, store, store atomic.
Patch by Karl Schimpf (kschimpf@google.com).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230180 91177308-0d34-0410-b5e6-96231b3b80d8
The metadata/value split introduced a major regression reading large
bitcode files that contain debug info (or other cyclic (non-self
reference) metadata graphs). For the first time in a while, I dropped
from libLTO.dylib down to `llvm-lto` with a non-trivial bitcode file
(~350MB), and I hit this when reading the result of ld64's `-save-temps`
in `llvm-lto`.
Here's pseudo-code for what was going on:
read-main-metadata-block:
for each md:
if has-fwd-ref: // Only true for cyclic graphs.
any-fwd-refs <- true
if any-fwd-refs:
foreach md:
resolve-cycles(md) // Handle cycles.
foreach function:
read-function-metadata-block: // Such as !alias, !loop
if any-fwd-refs:
foreach md: // (all metadata, not just this block)
resolve-cycles(md) // A no-op, but the loop is expensive!!
This commit resets the `AnyFwdRefs` flag to `false`. This on its own
was enough to change my Release+Asserts `llvm-lto` time for reading this
bitcode from over 20 minutes (I gave up on it) to 20 seconds. I've gone
further by tracking the min/max metadata forward-references in a
metadata block. This protects against a schema that has lots of
functions that each reference their own metadata cycle.
Unfortunately, this regression is in the 3.6 branch as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229421 91177308-0d34-0410-b5e6-96231b3b80d8
The bitcode reading interface used std::error_code to report an error to the
callers and it is the callers job to print diagnostics.
This is not ideal for error handling or diagnostic reporting:
* For error handling, all that the callers care about is 3 possibilities:
* It worked
* The bitcode file is corrupted/invalid.
* The file is not bitcode at all.
* For diagnostic, it is user friendly to include far more information
about the invalid case so the user can find out what is wrong with the
bitcode file. This comes up, for example, when a developer introduces a
bug while extending the format.
The compromise we had was to have a lot of error codes.
With this patch we use the DiagnosticHandler to communicate with the
human and std::error_code to communicate with the caller.
This allows us to have far fewer error codes and adds the infrastructure to
print better diagnostics. This is so because the diagnostics are printed when
he issue is found. The code that detected the problem in alive in the stack and
can pass down as much context as needed. As an example the patch updates
test/Bitcode/invalid.ll.
Using a DiagnosticHandler also moves the fatal/non-fatal error decision to the
caller. A simple one like llvm-dis can just use fatal errors. The gold plugin
needs a bit more complex treatment because of being passed non-bitcode files. An
hypothetical interactive tool would make all bitcode errors non-fatal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225562 91177308-0d34-0410-b5e6-96231b3b80d8
Split `Metadata` away from the `Value` class hierarchy, as part of
PR21532. Assembly and bitcode changes are in the wings, but this is the
bulk of the change for the IR C++ API.
I have a follow-up patch prepared for `clang`. If this breaks other
sub-projects, I apologize in advance :(. Help me compile it on Darwin
I'll try to fix it. FWIW, the errors should be easy to fix, so it may
be simpler to just fix it yourself.
This breaks the build for all metadata-related code that's out-of-tree.
Rest assured the transition is mechanical and the compiler should catch
almost all of the problems.
Here's a quick guide for updating your code:
- `Metadata` is the root of a class hierarchy with three main classes:
`MDNode`, `MDString`, and `ValueAsMetadata`. It is distinct from
the `Value` class hierarchy. It is typeless -- i.e., instances do
*not* have a `Type`.
- `MDNode`'s operands are all `Metadata *` (instead of `Value *`).
- `TrackingVH<MDNode>` and `WeakVH` referring to metadata can be
replaced with `TrackingMDNodeRef` and `TrackingMDRef`, respectively.
If you're referring solely to resolved `MDNode`s -- post graph
construction -- just use `MDNode*`.
- `MDNode` (and the rest of `Metadata`) have only limited support for
`replaceAllUsesWith()`.
As long as an `MDNode` is pointing at a forward declaration -- the
result of `MDNode::getTemporary()` -- it maintains a side map of its
uses and can RAUW itself. Once the forward declarations are fully
resolved RAUW support is dropped on the ground. This means that
uniquing collisions on changing operands cause nodes to become
"distinct". (This already happened fairly commonly, whenever an
operand went to null.)
If you're constructing complex (non self-reference) `MDNode` cycles,
you need to call `MDNode::resolveCycles()` on each node (or on a
top-level node that somehow references all of the nodes). Also,
don't do that. Metadata cycles (and the RAUW machinery needed to
construct them) are expensive.
- An `MDNode` can only refer to a `Constant` through a bridge called
`ConstantAsMetadata` (one of the subclasses of `ValueAsMetadata`).
As a side effect, accessing an operand of an `MDNode` that is known
to be, e.g., `ConstantInt`, takes three steps: first, cast from
`Metadata` to `ConstantAsMetadata`; second, extract the `Constant`;
third, cast down to `ConstantInt`.
The eventual goal is to introduce `MDInt`/`MDFloat`/etc. and have
metadata schema owners transition away from using `Constant`s when
the type isn't important (and they don't care about referring to
`GlobalValue`s).
In the meantime, I've added transitional API to the `mdconst`
namespace that matches semantics with the old code, in order to
avoid adding the error-prone three-step equivalent to every call
site. If your old code was:
MDNode *N = foo();
bar(isa <ConstantInt>(N->getOperand(0)));
baz(cast <ConstantInt>(N->getOperand(1)));
bak(cast_or_null <ConstantInt>(N->getOperand(2)));
bat(dyn_cast <ConstantInt>(N->getOperand(3)));
bay(dyn_cast_or_null<ConstantInt>(N->getOperand(4)));
you can trivially match its semantics with:
MDNode *N = foo();
bar(mdconst::hasa <ConstantInt>(N->getOperand(0)));
baz(mdconst::extract <ConstantInt>(N->getOperand(1)));
bak(mdconst::extract_or_null <ConstantInt>(N->getOperand(2)));
bat(mdconst::dyn_extract <ConstantInt>(N->getOperand(3)));
bay(mdconst::dyn_extract_or_null<ConstantInt>(N->getOperand(4)));
and when you transition your metadata schema to `MDInt`:
MDNode *N = foo();
bar(isa <MDInt>(N->getOperand(0)));
baz(cast <MDInt>(N->getOperand(1)));
bak(cast_or_null <MDInt>(N->getOperand(2)));
bat(dyn_cast <MDInt>(N->getOperand(3)));
bay(dyn_cast_or_null<MDInt>(N->getOperand(4)));
- A `CallInst` -- specifically, intrinsic instructions -- can refer to
metadata through a bridge called `MetadataAsValue`. This is a
subclass of `Value` where `getType()->isMetadataTy()`.
`MetadataAsValue` is the *only* class that can legally refer to a
`LocalAsMetadata`, which is a bridged form of non-`Constant` values
like `Argument` and `Instruction`. It can also refer to any other
`Metadata` subclass.
(I'll break all your testcases in a follow-up commit, when I propagate
this change to assembly.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223802 91177308-0d34-0410-b5e6-96231b3b80d8
When lazy reading a module, the types used in a function will not be visible to
a TypeFinder until the body is read.
This patch fixes that by asking the module for its identified struct types.
If a materializer is present, the module asks it. If not, it uses a TypeFinder.
This fixes pr21374.
I will be the first to say that this is ugly, but it was the best I could find.
Some of the options I looked at:
* Asking the LLVMContext. This could be made to work for gold, but not currently
for ld64. ld64 will load multiple modules into a single context before merging
them. This causes us to see types from future merges. Unfortunately,
MappedTypes is not just a cache when it comes to opaque types. Once the
mapping has been made, we have to remember it for as long as the key may
be used. This would mean moving MappedTypes to the Linker class and having
to drop the Linker::LinkModules static methods, which are visible from C.
* Adding an option to ignore function bodies in the TypeFinder. This would
fix the PR by picking the worst result. It would work, but unfortunately
we are currently quite dependent on the upfront type merging. I will
try to reduce our dependency, but it is not clear that we will be able
to get rid of it for now.
The only clean solution I could think of is making the Module own the types.
This would have other advantages, but it is a much bigger change. I will
propose it, but it is nice to have this fixed while that is discussed.
With the gold plugin, this patch takes the number of types in the LTO clang
binary from 52817 to 49669.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223215 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Ben Gamari!
This redefines the `prefix` attribute introduced previously and
introduces a `prologue` attribute. There are a two primary usecases
that these attributes aim to serve,
1. Function prologue sigils
2. Function hot-patching: Enable the user to insert `nop` operations
at the beginning of the function which can later be safely replaced
with a call to some instrumentation facility
3. Runtime metadata: Allow a compiler to insert data for use by the
runtime during execution. GHC is one example of a compiler that
needs this functionality for its tables-next-to-code functionality.
Previously `prefix` served cases (1) and (2) quite well by allowing the user
to introduce arbitrary data at the entrypoint but before the function
body. Case (3), however, was poorly handled by this approach as it
required that prefix data was valid executable code.
Here we redefine the notion of prefix data to instead be data which
occurs immediately before the function entrypoint (i.e. the symbol
address). Since prefix data now occurs before the function entrypoint,
there is no need for the data to be valid code.
The previous notion of prefix data now goes under the name "prologue
data" to emphasize its duality with the function epilogue.
The intention here is to handle cases (1) and (2) with prologue data and
case (3) with prefix data.
References
----------
This idea arose out of discussions[1] with Reid Kleckner in response to a
proposal to introduce the notion of symbol offsets to enable handling of
case (3).
[1] http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-May/073235.html
Test Plan: testsuite
Differential Revision: http://reviews.llvm.org/D6454
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223189 91177308-0d34-0410-b5e6-96231b3b80d8
To do this, change the representation of lazy loaded functions.
The previous representation cannot differentiate between a function whose body
has been removed and one whose body hasn't been read from the .bc file. That
means that in order to drop a function, the entire body had to be read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220580 91177308-0d34-0410-b5e6-96231b3b80d8
The attached patch simplifies a few interfaces that don't need to take
ownership of a buffer.
For example, both parseAssembly and parseBitcodeFile will parse the
entire buffer before returning. There is no need to take ownership.
Using a MemoryBufferRef makes it obvious in the type signature that
there is no ownership transfer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216488 91177308-0d34-0410-b5e6-96231b3b80d8
Block address forward-references are implemented by creating a
`BasicBlock` ahead of time that gets inserted in the `Function` when
it's eventually encountered.
However, if the same blockaddress was used in two separate functions
that were parsed *before* the referenced function (and the blockaddress
was never used at global scope), two separate basic blocks would get
created, one of which would be forgotten creating invalid IR.
This commit changes the forward-reference logic to create only one basic
block (and always return the same blockaddress).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215805 91177308-0d34-0410-b5e6-96231b3b80d8
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215558 91177308-0d34-0410-b5e6-96231b3b80d8
`BasicBlockFwdRefs` (and `BlockAddrFwdRefs` before it) was being emptied
in a non-deterministic order. When predicting use-list order I've
worked around this another way, but even when parsing lazily (and we
can't recreate use-list order) use-lists should be deterministic.
Make them so by using a side-queue of functions with forward-referenced
blocks that gets visited in order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214899 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we can reliably handle forward references to `BlockAddress`
(r214563), change the mechanics to simplify predicting use-list order.
Previously, we created dummy `GlobalVariable`s to represent block
addresses. After every function was materialized, we'd go through any
forward references to its blocks and RAUW them with a proper
`BlockAddress` constant. This causes some (potentially a lot of)
unnecessary use-list churn, since any constant expression that it's a
part of will need to be rematerialized as well.
Instead, pre-construct a `BasicBlock` immediately -- without attaching
it to its (empty) `Function` -- and use that to construct a
`BlockAddress`. This constant will not have to be regenerated. When
the function body is parsed, hook this pre-constructed basic block up
in the right place using `BasicBlock::insertInto()`.
Both before and after this change, the IR is temporarily in an invalid
state that gets resolved when `materializeForwardReferencedFunctions()`
gets called.
This is a prep commit that's part of PR5680, but the only functionality
change is the reduction of churn in the constant pool.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214570 91177308-0d34-0410-b5e6-96231b3b80d8
`BlockAddress`es are interesting in that they can reference basic blocks
from *outside* the block's function. Since basic blocks are not global
values, this presents particular challenges for lazy parsing.
One corner case was found in PR11677 and fixed in r147425. In that
case, a global variable references a block address. It's necessary to
load the relevant function to resolve the forward reference before doing
anything with the module.
By inspection, I found (and have fixed here) two other cases:
- An instruction from one function references a block address from
another function, and only the first function is lazily loaded.
I fixed this the same way as PR11677: by eagerly loading the
referenced function.
- A function whose block address is taken is dematerialized, leaving
invalid references to it.
I fixed this by refusing to dematerialize functions whose block
addresses are taken (if you have to load it, you can't unload it).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214559 91177308-0d34-0410-b5e6-96231b3b80d8
This will let users in other libraries know which error occurred. In particular,
it will be possible to check if the parsing failed or if the file is not
bitcode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214209 91177308-0d34-0410-b5e6-96231b3b80d8
Predict and serialize use-list order in bitcode. This makes the option
`-preserve-bc-use-list-order` work *most* of the time, but this is still
experimental.
- Builds a full value-table up front in the writer, sets up a list of
use-list orders to write out, and discards the table. This is a
simpler first step than determining the order from the various
overlapping IDs of values on-the-fly.
- The shuffles stored in the use-list order list have an unnecessarily
large memory footprint.
- `blockaddress` expressions cause functions to be materialized
out-of-order. For now I've ignored this problem, so use-list orders
will be wrong for constants used by functions that have block
addresses taken. There are a couple of ways to fix this, but I
don't have a concrete plan yet.
- When materializing functions lazily, the use-lists for constants
will not be correct. This use case is out of scope: what should the
use-list order be, if it's incomplete?
This is part of PR5680.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214125 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r212342.
We can get a StringRef into the current Record, but not one in the bitcode
itself since the string is compressed in it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212356 91177308-0d34-0410-b5e6-96231b3b80d8
This new IR facility allows us to represent the object-file semantic of
a COMDAT group.
COMDATs allow us to tie together sections and make the inclusion of one
dependent on another. This is required to implement features like MS
ABI VFTables and optimizing away certain kinds of initialization in C++.
This functionality is only representable in COFF and ELF, Mach-O has no
similar mechanism.
Differential Revision: http://reviews.llvm.org/D4178
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211920 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to just use a std::unique_ptr to store the pointer to the buffer.
The flip side is that they have to support releasing the buffer back to the
caller.
Overall this looks like a more efficient and less brittle api.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211542 91177308-0d34-0410-b5e6-96231b3b80d8
LLVMGetBitcodeModuleInContext should not take ownership on error. I will
try to localize this odd api requirement, but this should get the bots green.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211213 91177308-0d34-0410-b5e6-96231b3b80d8
We do have use cases for the bitcode reader owning the buffer or not, but we
always know which one we have when we construct it.
It might be possible to simplify this further, but this is a step in the
right direction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211205 91177308-0d34-0410-b5e6-96231b3b80d8
This is a minimal change to remove the header. I will remove the occurrences
of "using std::error_code" in a followup patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210803 91177308-0d34-0410-b5e6-96231b3b80d8
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203083 91177308-0d34-0410-b5e6-96231b3b80d8
implementation already lived.
After this commit, the only IR-library headers in include/llvm/* are
ones related to the legacy pass infrastructure that I'm planning to
leave there until the new one is farther along.
The only other headers at the top level are linking and initialization
aids that aren't really libraries but just headers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203069 91177308-0d34-0410-b5e6-96231b3b80d8
Move the test for this class into the IR unittests as well.
This uncovers that ValueMap too is in the IR library. Ironically, the
unittest for ValueMap is useless in the Support library (honestly, so
was the ValueHandle test) and so it already lives in the IR unittests.
Mmmm, tasty layering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202821 91177308-0d34-0410-b5e6-96231b3b80d8
subsequent changes are easier to review. About to fix some layering
issues, and wanted to separate out the necessary churn.
Also comment and sink the include of "Windows.h" in three .inc files to
match the usage in Memory.inc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198685 91177308-0d34-0410-b5e6-96231b3b80d8
In order to create an ObjectFile implementation that uses bitcode files, we
need to propagate the bitcode errors to the ObjectFile interface, so we need
to convert it to use the same error handling as ObjectFile: error_code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193996 91177308-0d34-0410-b5e6-96231b3b80d8
We treat TBAA tags as struct-path aware TBAA format when the first operand
is a MDNode and the tag has 3 or more operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191593 91177308-0d34-0410-b5e6-96231b3b80d8
It works with clang, but GCC has different rules so we can't make all of those
hidden. This reverts commit r190534.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190536 91177308-0d34-0410-b5e6-96231b3b80d8
The bitcode representation attribute kinds are encoded into / decoded from
should be independent of the current set of LLVM attributes and their position
in the AttrKind enum. This patch explicitly encodes attributes to fixed bitcode
values.
With this patch applied, LLVM does not silently misread attributes written by
LLVM 3.3. We also enhance the decoding slightly such that an error message is
printed if an unknown AttrKind encoding was dected.
Bonus: Dropping bitcode attributes from AttrKind is now easy, as old AttrKinds
do not need to be kept to support the Bitcode reader.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187186 91177308-0d34-0410-b5e6-96231b3b80d8
This reads the attribute groups. It currently doesn't do anything with them.
NOTE: In the commit to the bitcode writer, the format *may* change in the near
future. Which means that this code would also change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174849 91177308-0d34-0410-b5e6-96231b3b80d8
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
missed in the first pass because the script didn't yet handle include
guards.
Note that the script is now able to handle all of these headers without
manual edits. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169224 91177308-0d34-0410-b5e6-96231b3b80d8
