register-indirect address with an offset of 0.
It used to be that a DBG_VALUE is a register-indirect value if the offset
(operand 1) is nonzero. The new convention is that a DBG_VALUE is
register-indirect if the first operand is a register and the second
operand is an immediate. For plain registers use the combination reg, reg.
rdar://problem/13658587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180816 91177308-0d34-0410-b5e6-96231b3b80d8
The `llvm.tls_init_funcs' (created by the front-end) holds pointers to the TLS
initialization functions. These need to be placed into the correct section so
that they are run before `main()'.
<rdar://problem/13733006>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180737 91177308-0d34-0410-b5e6-96231b3b80d8
to determine whether or not we're on a darwin platform for debug code
emitting.
Solves the problem of a module with no triple on the command line
and no triple in the module using non-gdb ok features on darwin. Fix
up the member-pointers test to check the correct things for cross
platform (DW_FORM_flag is a good prefix).
Unfortunately no testcase because I have no ideas how to test something
without a triple and without a triple in the module yet check
precisely on two platforms. Ideas welcome.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180660 91177308-0d34-0410-b5e6-96231b3b80d8
Clarify documentation and API to make the difference between register and
register-indirect addressed locations more explicit. Put in a comment
to point out that with the current implementation we cannot specify
a register-indirect location with offset 0 (a breg 0 in DWARF).
No functionality change intended.
rdar://problem/13658587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180641 91177308-0d34-0410-b5e6-96231b3b80d8
Also add a check for llvm.used in the verifier and simplify clients now that
they can assume they have a ConstantArray.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180019 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r179840 with a fix to test/DebugInfo/two-cus-from-same-file.ll
I'm not sure why that test only failed on ARM & MIPS and not X86 Linux, even
though the debug info was clearly invalid on all of them, but this ought to fix
it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179996 91177308-0d34-0410-b5e6-96231b3b80d8
Adding another CU-wide list, in this case of imported_modules (since they
should be relatively rare, it seemed better to add a list where each element
had a "context" value, rather than add a (usually empty) list to every scope).
This takes care of DW_TAG_imported_module, but to fully address PR14606 we'll
need to expand this to cover DW_TAG_imported_declaration too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179836 91177308-0d34-0410-b5e6-96231b3b80d8
therefore not at all) of the pc or statement list. We also don't
need to emit the compilation dir so save so space and time
and don't bother.
Fix up the testcase accordingly and verify that we don't emit
the attributes or the items that they use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179114 91177308-0d34-0410-b5e6-96231b3b80d8
a relocation across sections. Do this for DW_AT_stmt list in the
skeleton CU and check the relocations in the debug_info section.
Add a FIXME for multiple CUs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178969 91177308-0d34-0410-b5e6-96231b3b80d8
We used to do "SmallString += CUID", which is incorrect, since CUID will
be truncated to a char.
rdar://problem/13573833
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178941 91177308-0d34-0410-b5e6-96231b3b80d8
There is a difference for FORM_ref_addr between DWARF 2 and DWARF 3+.
Since Eric is against guarding DWARF 2 ref_addr with DarwinGDBCompat, we are
still in discussion on how to handle this.
The correct solution is to update our header to say version 4 instead of version
2 and update tool chains as well.
rdar://problem/13559431
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178806 91177308-0d34-0410-b5e6-96231b3b80d8
the target system.
It was hard-coded to 4 bytes before. I can't get llvm to generate a
ref_addr on a reasonably sized testing case.
rdar://problem/13559431
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178722 91177308-0d34-0410-b5e6-96231b3b80d8
die values. A lot of DIEs have 10 attributes in C++ code (example
clang), none had more than 12. Seems like a good default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178366 91177308-0d34-0410-b5e6-96231b3b80d8
The always-true "(int)Int == (signed)Int" comparison was found
while experimenting with a potential new Clang warning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177290 91177308-0d34-0410-b5e6-96231b3b80d8
belongs to a different compile unit.
DW_FORM_ref_addr should be used for cross compile-unit reference.
When compiling a large application, we got a dwarfdump verification error where
abstract_origin points to nowhere.
This error can't be reproduced on any testing case in MultiSource.
We may have other cases where we use DW_FORM_ref4 unconditionally.
rdar://problem/13370501
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176882 91177308-0d34-0410-b5e6-96231b3b80d8
Versioned debug info support has been a burden to maintain & also compromised
current debug info verification by causing test cases testing old debug info to
remain rather than being updated to the latest. It also makes it hard to add or
change the metadata schema by requiring various backwards-compatibility in the
DI* hierarchy.
So it's being removed in preparation for new changes to the schema to tidy up
old/unnecessary fields and add new fields needed for new debug info (well, new
to LLVM at least).
The more surprising part of this is the changes to DI*::Verify - this became
necessary due to the changes to AsmWriter. AsmWriter was relying on the version
test to decide which bits of metadata were actually debug info when printing
the comment annotations. Without the version information the tag numbers were
too common & it would print debug info on random metadata that happened to
start with an integer that matched a tag number. Instead this change makes the
Verify functions more precise (just adding "number of operands" checks - not
type checking those operands yet) & relies on that to decide which metadata is
debug info metadata.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176838 91177308-0d34-0410-b5e6-96231b3b80d8
We now emit a line table for each compile unit. To reduce the prologue size
of each line table, the files and directories used by each compile unit are
stored in std::map<unsigned, std::vector< > > instead of std::vector< >.
The prologue for a lto'ed image can be as big as 93K. Duplicating 93K for each
compile unit causes a huge increase of debug info. With this patch, each
prologue will only emit the files required by the compile unit.
rdar://problem/13342023
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176605 91177308-0d34-0410-b5e6-96231b3b80d8
definition DIE (TAG_variable), and put AT_MIPS_linkage_name to TAG_member when
DarwinGDBCompat is true.
Darwin GDB needs AT_MIPS_linkage_name at both places to work.
Follow-up patch to r176143.
rdar://problem/13291234
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176220 91177308-0d34-0410-b5e6-96231b3b80d8
definition DIE, to make old GDB happy.
We have a regression for old GDB when Clang uses DW_TAG_member to declare
static members inside a class, instead of DW_TAG_variable. This patch will fix
this regression.
rdar://problem/13291234
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176143 91177308-0d34-0410-b5e6-96231b3b80d8
TAG_member inside a class to the specification DIE.
Having AT_MIPS_linkage_name on TAG_member caused old gdb (GNU 6.3.50) to
error out. Also gcc 4.7 has AT_MIPS_linkage_name on the specification DIE.
rdar://problem/13291234
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176120 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts my commit 171047. Now that I've removed my misguided attempt to
support backend warnings, these diagnostics are only about inline assembly.
It would take quite a bit more work to generalize them properly, so I'm
just reverting this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174860 91177308-0d34-0410-b5e6-96231b3b80d8
syms before constructing the compile units so we're not emitting
section references to sections not there already.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174663 91177308-0d34-0410-b5e6-96231b3b80d8
Failure: undefined symbol 'Lline_table_start0'.
Root-cause: we use a symbol subtraction to calculate at_stmt_list, but
the line table entries are not dumped in the assembly.
Fix: use zero instead of a symbol subtraction for Compile Unit 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174479 91177308-0d34-0410-b5e6-96231b3b80d8
