- Allocate MachineMemOperands and MachineMemOperand lists in MachineFunctions.
This eliminates MachineInstr's std::list member and allows the data to be
created by isel and live for the remainder of codegen, avoiding a lot of
copying and unnecessary translation. This also shrinks MemSDNode.
- Delete MemOperandSDNode. Introduce MachineSDNode which has dedicated
fields for MachineMemOperands.
- Change MemSDNode to have a MachineMemOperand member instead of its own
fields with the same information. This introduces some redundancy, but
it's more consistent with what MachineInstr will eventually want.
- Ignore alignment when searching for redundant loads for CSE, but remember
the greatest alignment.
Target-specific code which previously used MemOperandSDNodes with generic
SDNodes now use MemIntrinsicSDNodes, with opcodes in a designated range
so that the SelectionDAG framework knows that MachineMemOperand information
is available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82794 91177308-0d34-0410-b5e6-96231b3b80d8
naming scheme used in SelectionDAG, where there are multiple kinds
of "target" nodes, but "machine" nodes are nodes which represent
a MachineInstr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82790 91177308-0d34-0410-b5e6-96231b3b80d8
ADDC/ADDE use MVT::i1 (later, whatever it gets legalized to)
instead of MVT::Flag. Remove CARRY_FALSE in favor of 0; adjust
all target-independent code to use this format.
Most targets will still produce a Flag-setting target-dependent
version when selection is done. X86 is converted to use i32
instead, which means TableGen needs to produce different code
in xxxGenDAGISel.inc. This keys off the new supportsHasI1 bit
in xxxInstrInfo, currently set only for X86; in principle this
is temporary and should go away when all other targets have
been converted. All relevant X86 instruction patterns are
modified to represent setting and using EFLAGS explicitly. The
same can be done on other targets.
The immediate behavior change is that an ADC/ADD pair are no
longer tightly coupled in the X86 scheduler; they can be
separated by instructions that don't clobber the flags (MOV).
I will soon add some peephole optimizations based on using
other instructions that set the flags to feed into ADC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72707 91177308-0d34-0410-b5e6-96231b3b80d8
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70343 91177308-0d34-0410-b5e6-96231b3b80d8
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70270 91177308-0d34-0410-b5e6-96231b3b80d8
This will be used to replace things like X86's MOV32to32_.
Enhance ScheduleDAGSDNodesEmit to be more flexible and robust
in the presense of subregister superclasses and subclasses. It
can now cope with the definition of a virtual register being in
a subclass of a use.
Re-introduce the code for recording register superreg classes and
subreg classes. This is needed because when subreg extracts and
inserts get coalesced away, the virtual registers are left in
the correct subclass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68961 91177308-0d34-0410-b5e6-96231b3b80d8
Note that these are distinct from TargetInstrInfo::INSERT_SUBREG
and TargetInstrInfo::EXTRACT_SUBREG, which are used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68355 91177308-0d34-0410-b5e6-96231b3b80d8
register classes. Before, MVT::Other would be returned anytime a reg was
in multiple register classes. Now, MVT::Other is only returned if the types
for those register classes differ.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67714 91177308-0d34-0410-b5e6-96231b3b80d8
- Modify TableGen to add the DebugLoc when calling getTargetNode.
(The light-weight wrappers are only temporary. The non-DebugLoc version will be
removed once the whole debug info stuff is finished with.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63273 91177308-0d34-0410-b5e6-96231b3b80d8
after the code that sorts the patterns. This doesn't
affect the output, but it makes the code a little easier
to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63265 91177308-0d34-0410-b5e6-96231b3b80d8
is set but mayLoad is not set. Fix all the problems this turned up.
Change code to not use isSimpleLoad instead of mayLoad unless it
really wants isSimpleLoad.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60459 91177308-0d34-0410-b5e6-96231b3b80d8
priority function. Instead, just iterate over the AllNodes list, which is
already in topological order. This eliminates a fair amount of bookkeeping,
and speeds up the isel phase by about 15% on many testcases.
The impact on most targets is that AddToISelQueue calls can be simply removed.
In the x86 target, there are two additional notable changes.
The rule-bending AND+SHIFT optimization in MatchAddress that creates new
pre-isel nodes during isel is now a little more verbose, but more robust.
Instead of either creating an invalid DAG or creating an invalid topological
sort, as it has historically done, it can now just insert the new nodes into
the node list at a position where they will be consistent with the topological
ordering.
Also, the address-matching code has logic that checked to see if a node was
"already selected". However, when a node is selected, it has all its uses
taken away via ReplaceAllUsesWith or equivalent, so it won't recieve any
further visits from MatchAddress. This code is now removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58748 91177308-0d34-0410-b5e6-96231b3b80d8
flag. Then in a debugger developers can set breakpoints at these calls
to see waht is about to be selected and what the resulting subgraph
looks like. This really helps when debugging instruction selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58278 91177308-0d34-0410-b5e6-96231b3b80d8
constants that don't fit in an int. This fixes
"this decimal constant is unsigned only in ISO C90"
warnings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57668 91177308-0d34-0410-b5e6-96231b3b80d8
use a SUB instruction instead of an ADD, because -128 can be
encoded in an 8-bit signed immediate field, while +128 can't be.
This avoids the need for a 32-bit immediate field in this case.
A similar optimization applies to 64-bit adds with 0x80000000,
with the 32-bit signed immediate field.
To support this, teach tablegen how to handle 64-bit constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57663 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow predicates to be composed, which will allow the
predicate definitions to become less redundant, and eventually
will allow DAGISelEmitter.cpp to emit less redundant code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57562 91177308-0d34-0410-b5e6-96231b3b80d8
helper functions instead of duplicating it inline each time
it is needed. This eliminates a few hundred or so copies
of this code in each target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56759 91177308-0d34-0410-b5e6-96231b3b80d8
- Add linkage to SymbolSDNode (default to external).
- Change ISD::ExternalSymbol to ISD::Symbol.
- Change ISD::TargetExternalSymbol to ISD::TargetSymbol
These changes pave the way to allowing SymbolSDNodes with non-external linkage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56249 91177308-0d34-0410-b5e6-96231b3b80d8
ConstantFP* instead of APInt and APFloat directly.
This reduces the amount of time to create ConstantSDNode
and ConstantFPSDNode nodes when ConstantInt* and ConstantFP*
respectively are already available, as is the case in
SelectionDAGBuild.cpp. Also, it reduces the amount of time
to legalize constants into constant pools, and the amount of
time to add ConstantFP operands to MachineInstrs, due to
eliminating ConstantInt::get and ConstantFP::get calls.
It increases the amount of work needed to create new constants
in cases where the client doesn't already have a ConstantInt*
or ConstantFP*, such as legalize expanding 64-bit integer constants
to 32-bit constants. And it adds a layer of indirection for the
accessor methods. But these appear to be outweight by the benefits
in most cases.
It will also make it easier to make ConstantSDNode and
ConstantFPNode more consistent with ConstantInt and ConstantFP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56162 91177308-0d34-0410-b5e6-96231b3b80d8
with ConstantInt. This led to fixing a bug in TargetLowering.cpp
using getValue instead of getAPIntValue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56159 91177308-0d34-0410-b5e6-96231b3b80d8
