The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240137 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using clang-tidy misc-use-override check.
This command was used:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py \
-checks='-*,misc-use-override' -header-filter='llvm|clang' \
-j=32 -fix -format
http://reviews.llvm.org/D8925
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234679 91177308-0d34-0410-b5e6-96231b3b80d8
by using a segment set.
The patch addresses a compile-time performance regression in the LiveIntervals
analysis pass (see http://llvm.org/bugs/show_bug.cgi?id=18580). This regression
is especially critical when compiling long functions. Our analysis had shown
that the most of time is taken for generation of live intervals for physical
registers. Insertions in the middle of the array of live ranges cause quadratic
algorithmic complexity, which is apparently the main reason for the slow-down.
Overview of changes:
- The patch introduces an additional std::set<Segment>* member in LiveRange for
storing segments in the phase of initial creation. The set is used if this
member is not NULL, otherwise everything works the old way.
- The set of operations on LiveRange used during initial creation (i.e. used by
createDeadDefs and extendToUses) have been reimplemented to use the segment
set if it is available.
- After a live range is created the contents of the set are flushed to the
segment vector, because the set is not as efficient as the vector for the
later uses of the live range. After the flushing, the set is deleted and
cannot be used again.
- The set is only for live ranges computed in
LiveIntervalAnalysis::computeLiveInRegUnits() and getRegUnit() but not in
computeVirtRegs(), because I did not bring any performance benefits to
computeVirtRegs() and for some examples even brought a slow down.
Patch by Vaidas Gasiunas <vaidas.gasiunas@sap.com>
Differential Revision: http://reviews.llvm.org/D6013
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228421 91177308-0d34-0410-b5e6-96231b3b80d8
This cleans up code and is more in line with the general philosophy of
modifying LiveIntervals through LiveIntervalAnalysis instead of changing
them directly.
This also fixes a case where SplitEditor::removeBackCopies() would miss
the subregister ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226690 91177308-0d34-0410-b5e6-96231b3b80d8
This cleans up code and is more in line with the general philosophy of
modifying LiveIntervals through LiveIntervalAnalysis instead of changing
them directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226687 91177308-0d34-0410-b5e6-96231b3b80d8
- This also fixes a bug introduced in r223880 where values were not
correctly marked as Dead anymore.
- Cleanup computeDeadValues(): split up SubRange code variant, simplify
arguments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224538 91177308-0d34-0410-b5e6-96231b3b80d8
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215558 91177308-0d34-0410-b5e6-96231b3b80d8
This gets us closer to being able to remove LiveVariables entirely which is where dead instructions are currently tagged as such.
Reviewed by Jakob Olesen
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210132 91177308-0d34-0410-b5e6-96231b3b80d8
This is slightly more interesting than the previous batch of changes.
Specifically:
1. We refactor getSpillWeight to take a MachineBlockFrequencyInfo (MBFI)
object. This enables us to completely encapsulate the actual manner we
use the MachineBlockFrequencyInfo to get our spill weights. This yields
cleaner code since one does not need to fetch the actual block frequency
before getting the spill weight if all one wants it the spill weight. It
also gives us access to entry frequency which we need for our
computation.
2. Instead of having getSpillWeight take a MachineBasicBlock (as one
might think) to look up the block frequency via the MBFI object, we
instead take in a MachineInstr object. The reason for this is that the
method is supposed to return the spill weight for an instruction
according to the comments around the function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197296 91177308-0d34-0410-b5e6-96231b3b80d8
Previously LiveInterval has been used, but having a spill weight and
register number is unnecessary for a register unit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192397 91177308-0d34-0410-b5e6-96231b3b80d8
LiveRange just manages a list of segments and a list of value numbers
now as LiveInterval did previously, but without having details like spill
weight or a fixed register number.
LiveInterval is now a subclass of LiveRange and simply adds the spill weight
and the register number.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192393 91177308-0d34-0410-b5e6-96231b3b80d8
The Segment struct contains a single interval; multiple instances of this struct
are used to construct a live range, but the struct is not a live range by
itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192392 91177308-0d34-0410-b5e6-96231b3b80d8
When new virtual registers are created during splitting/spilling, defer
creation of the live interval until we need to use the live interval.
Along with the recent commits to notify LiveRangeEdit when new virtual
registers are created, this makes it possible for functions like
TargetInstrInfo::loadRegFromStackSlot() and
TargetInstrInfo::storeRegToStackSlot() to create multiple virtual
registers as part of the process of generating loads/stores for
different register classes, and then have the live intervals for those
new registers computed when they are needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188437 91177308-0d34-0410-b5e6-96231b3b80d8
The main advantages here are way better heuristics, taking into account not
just loop depth but also __builtin_expect and other static heuristics and will
eventually learn how to use profile info. Most of the work in this patch is
pushing the MachineBlockFrequencyInfo analysis into the right places.
This is good for a 5% speedup on zlib's deflate (x86_64), there were some very
unfortunate spilling decisions in its hottest loop in longest_match(). Other
benchmarks I tried were mostly neutral.
This changes register allocation in subtle ways, update the tests for it.
2012-02-20-MachineCPBug.ll was deleted as it's very fragile and the instruction
it looked for was gone already (but the FileCheck pattern picked up unrelated
stuff).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184105 91177308-0d34-0410-b5e6-96231b3b80d8
arguably better than forward iterators for this use case, they are confusing and
there are some implementation problems with reverse iterators and MI bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175393 91177308-0d34-0410-b5e6-96231b3b80d8
terminators that actually have register uses when splitting critical edges.
This commit also introduces a method repairIntervalsInRange() on LiveIntervals,
which allows for repairing LiveIntervals in a small range after an arbitrary
target hook modifies, inserts, and removes instructions. It's pretty limited
right now, but I hope to extend it to support all of the things that are done
by the convertToThreeAddress() target hooks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175382 91177308-0d34-0410-b5e6-96231b3b80d8
AKA: Recompile *ALL* the source code!
This one went much better. No manual edits here. I spot-checked for
silliness and grep-checked for really broken edits and everything seemed
good. It all still compiles. Yell if you see something that looks goofy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169133 91177308-0d34-0410-b5e6-96231b3b80d8
This is a medium term workaround until we have a more robust solution
in the form of a register liveness utility for postRA passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166001 91177308-0d34-0410-b5e6-96231b3b80d8
Add LIS::pruneValue() and extendToIndices(). These two functions are
used by the register coalescer when merging two live ranges requires
more than a trivial value mapping as supported by LiveInterval::join().
The pruneValue() function can remove the part of a value number that is
going to conflict in join(). Afterwards, extendToIndices can restore the
live range, using any new dominating value numbers and updating the SSA
form.
Use this complex value mapping to support merging a register into a
vector lane that has a conflicting value, but the clobbered lane is
undef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164074 91177308-0d34-0410-b5e6-96231b3b80d8
We will soon allow virtual register live ranges to overlap regunit live
ranges when the physreg is defined as a copy of the virtreg:
%EAX = COPY %vreg5
FOO %vreg5
BAR %EAX<kill>
There is no real interference since %vreg5 and %EAX have the same value
where they overlap.
This patch prevents addKillFlags from adding virtreg kill flags to FOO
where the assigned physreg is overlapping the virtual register live
range.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163335 91177308-0d34-0410-b5e6-96231b3b80d8
The VNInfo::HAS_PHI_KILL is only half supported. We precompute it in
LiveIntervalAnalysis, but it isn't properly updated by live range
splitting and functions like shrinkToUses().
It is only used in one place: RegisterCoalescer::removeCopyByCommutingDef().
This patch changes that function to use a new LiveIntervals::hasPHIKill()
function that computes the flag for a given value number.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161254 91177308-0d34-0410-b5e6-96231b3b80d8
This option replaces the existing live interval computation with one
based on LiveRangeCalc.cpp. The new algorithm does not depend on
LiveVariables, and it can be run at any time, before or after leaving
SSA form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160892 91177308-0d34-0410-b5e6-96231b3b80d8
With regunit liveness permanently enabled, this function would always
return true.
Also remove now obsolete code for checking physreg interference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159006 91177308-0d34-0410-b5e6-96231b3b80d8
Live intervals for regunits and virtual registers are stored separately,
and physreg live intervals are going away.
To visit the live ranges of all virtual registers, use this pattern
instead:
for (unsigned i = 0, e = MRI->getNumVirtRegs(); i != e; ++i) {
unsigned Reg = TargetRegisterInfo::index2VirtReg(i);
if (MRI->reg_nodbg_empty(Reg))
continue;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158879 91177308-0d34-0410-b5e6-96231b3b80d8
Regunit live ranges are computed on demand, so when mi-sched calls
handleMove, some regunits may not have live ranges yet.
That makes updating them easier: Just skip the non-existing ranges. They
will be computed correctly from the rescheduled machine code when they
are needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158831 91177308-0d34-0410-b5e6-96231b3b80d8
