try to match them by name first. If there is no by-name match, fall back to
assuming they are in order (this was the previous behavior).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116211 91177308-0d34-0410-b5e6-96231b3b80d8
as the operator of the dag. Specifically, this allows parsing things
like (F.x 4) in addition to just (a 4).
Unfortunately, this runs afoul of an idiom being used by llvmc. It
is using dags like (foo [1,2,3]) to represent a list of stuff being
passed into foo. With this change, this is parsed as a [1,2,3]
subscript on foo instead of being the first argument to the dag.
Cope with this in the short term by requiring a "-llvmc-temp-hack"
argument to tblgen to get the old parsing behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115742 91177308-0d34-0410-b5e6-96231b3b80d8
tried (but failed) to artificially constrain it to working with #NAME#.
Just allow any # in identifiers, and update the comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115704 91177308-0d34-0410-b5e6-96231b3b80d8
The x86_mmx type is used for MMX intrinsics, parameters and
return values where these use MMX registers, and is also
supported in load, store, and bitcast.
Only the above operations generate MMX instructions, and optimizations
do not operate on or produce MMX intrinsics.
MMX-sized vectors <2 x i32> etc. are lowered to XMM or split into
smaller pieces. Optimizations may occur on these forms and the
result casted back to x86_mmx, provided the result feeds into a
previous existing x86_mmx operation.
The point of all this is prevent optimizations from introducing
MMX operations, which is unsafe due to the EMMS problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115243 91177308-0d34-0410-b5e6-96231b3b80d8
or not. TableGen needs to generate the printInstruction() function as taking
an MCInstr* or a MachineInstr*, depending. Default to the old non-MC
version so that everything not yet using MC continues to just work without
fidding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115126 91177308-0d34-0410-b5e6-96231b3b80d8
operands.
With this done, we can remove the _Int suffixes from the round instructions
without the disassembler blowing up. This allows the assembler to support
them, implementing rdar://8456376 - llvm-mc rejects 'roundss'
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115019 91177308-0d34-0410-b5e6-96231b3b80d8
that complex patterns are matched after the entire pattern has
a structural match, therefore the NodeStack isn't in a useful
state when the actual call to the matcher happens.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114489 91177308-0d34-0410-b5e6-96231b3b80d8
passed the root of the match, even though only a few patterns
actually needed this (one in X86, several in ARM [which should
be refactored anyway], and some in CellSPU that I don't feel
like detangling). Instead of requiring all ComplexPatterns to
take the dead root, have targets opt into getting the root by
putting SDNPWantRoot on the ComplexPattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114471 91177308-0d34-0410-b5e6-96231b3b80d8
instruction in the class would be decoded to. Or zero if the number of
uOPs must be determined dynamically.
This will be used to determine the cost-effectiveness of predicating a
micro-coded instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113513 91177308-0d34-0410-b5e6-96231b3b80d8
is busted for all variants, report it as the location. This allows
us to get the operand right for bugs like:
t.s:3:12: error: invalid operand for instruction
outb %al, %gs
^
Even though there are reg/imm and reg/reg forms of this instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113183 91177308-0d34-0410-b5e6-96231b3b80d8
of a mneumonic, report operand errors with better location
info. For example, we now report:
t.s:6:14: error: invalid operand for instruction
cwtl $1
^
but we fail for common cases like:
t.s:11:4: error: invalid operand for instruction
addl $1, $1
^
because we don't know if this is supposed to be the reg/imm or imm/reg
form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113178 91177308-0d34-0410-b5e6-96231b3b80d8
by doing a binary search over the mnemonic instead of doing a linear
search through all possible instructions. This implements rdar://7785064
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113171 91177308-0d34-0410-b5e6-96231b3b80d8
generated matcher, emiting it as a column in the MatchEntry
table instead of forcing it to go through classification and
everything else. Making it be classified caused tblgen to
produce a ton of one-off classes for each mneumonic. This
should reduce the size of the generated matcher significantly
while paving the way for future improvements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113169 91177308-0d34-0410-b5e6-96231b3b80d8
failed because a subtarget feature was not enabled. Use this to
remove a bunch of hacks from the X86AsmParser for rejecting things
like popfl in 64-bit mode. Previously these hacks weren't needed,
but were important to get a message better than "invalid instruction"
when used in the wrong mode.
This also fixes bugs where pushal would not be rejected correctly in
32-bit mode (just pusha).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113166 91177308-0d34-0410-b5e6-96231b3b80d8
into the middle of the class, and rework how the different sections of
the generated file are conditionally included for simplicity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113163 91177308-0d34-0410-b5e6-96231b3b80d8
of a base class.
This makes it possible to unregister the file from FilesToRemove when
the file is done. Also, this eliminates the need for
formatted_tool_output_file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112706 91177308-0d34-0410-b5e6-96231b3b80d8
hierarchy with virtual methods and using llvm_unreachable to properly indicate
unreachable states which would otherwise leave variables uninitialized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111803 91177308-0d34-0410-b5e6-96231b3b80d8
Tested on Linux and Darwin; please add platform-specific XFAILs/mail me a bug
report if this still fails.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110998 91177308-0d34-0410-b5e6-96231b3b80d8
the memory barrier variants (other than 'SY' full system domain read and write)
are treated as one instruction with option operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110951 91177308-0d34-0410-b5e6-96231b3b80d8
(I discovered 2 more copies of the ARM instruction format list, bringing the
total to 4!! Two of them were already out of sync. I haven't yet gotten into
the disassembler enough to know the best way to fix this, but something needs
to be done.) Add support for encoding these instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110754 91177308-0d34-0410-b5e6-96231b3b80d8
Without this what was happening was:
* R3 is not marked as "used"
* ARM backend thinks it has to save it to the stack because of vaarg
* Offset computation correctly ignores it
* Offsets are wrong
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110446 91177308-0d34-0410-b5e6-96231b3b80d8
need the Compare flag after all.
--- Reverse-merging r109901 into '.':
U include/llvm/Target/TargetInstrDesc.h
U include/llvm/Target/Target.td
U utils/TableGen/InstrInfoEmitter.cpp
U utils/TableGen/CodeGenInstruction.cpp
U utils/TableGen/CodeGenInstruction.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110424 91177308-0d34-0410-b5e6-96231b3b80d8
later to identify and possibly remove superfluous compare instructions -- those
that are testing for and setting a status flag that should already be set.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109901 91177308-0d34-0410-b5e6-96231b3b80d8
have 4 bits per register in the operand encoding), but have undefined
behavior when the operand value is 13 or 15 (SP and PC, respectively).
The trivial coalescer in linear scan sometimes will merge a copy from
SP into a subsequent instruction which uses the copy, and if that
instruction cannot legally reference SP, we get bad code such as:
mls r0,r9,r0,sp
instead of:
mov r2, sp
mls r0, r9, r0, r2
This patch adds a new register class for use by Thumb2 that excludes
the problematic registers (SP and PC) and is used instead of GPR
for those operands which cannot legally reference PC or SP. The
trivial coalescer explicitly requires that the register class
of the destination for the COPY instruction contain the source
register for the COPY to be considered for coalescing. This prevents
errant instructions like that above.
PR7499
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109842 91177308-0d34-0410-b5e6-96231b3b80d8
- Currently includes a hack to limit ourselves to "In32BitMode" and "In64BitMode", because we don't have the other infrastructure to properly deal with setting SSE, etc. features on X86.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108677 91177308-0d34-0410-b5e6-96231b3b80d8
- Check getBytesToPopOnReturn().
- Eschew ST0 and ST1 for return values.
- Fix the PIC base register initialization so that it doesn't ever
fail to end up the top of the entry block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108039 91177308-0d34-0410-b5e6-96231b3b80d8
notes:
- The instructions are being added with dummy placeholder patterns using some 256
specifiers, this is not meant to work now, but since there are some multiclasses
generic enough to accept them, when we go for codegen, the stuff will be already
there.
- Add VEX encoding bits to support YMM
- Add MOVUPS and MOVAPS in the first round
- Use "Y" as suffix for those Instructions: MOVUPSYrr, ...
- All AVX instructions in X86InstrSSE.td will move soon to a new X86InstrAVX
file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107996 91177308-0d34-0410-b5e6-96231b3b80d8
U utils/TableGen/FastISelEmitter.cpp
--- Reverse-merging r107943 into '.':
U test/CodeGen/X86/fast-isel.ll
U test/CodeGen/X86/fast-isel-loads.ll
U include/llvm/Target/TargetLowering.h
U include/llvm/Support/PassNameParser.h
U include/llvm/CodeGen/FunctionLoweringInfo.h
U include/llvm/CodeGen/CallingConvLower.h
U include/llvm/CodeGen/FastISel.h
U include/llvm/CodeGen/SelectionDAGISel.h
U lib/CodeGen/LLVMTargetMachine.cpp
U lib/CodeGen/CallingConvLower.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
U lib/CodeGen/SelectionDAG/FunctionLoweringInfo.cpp
U lib/CodeGen/SelectionDAG/FastISel.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
U lib/CodeGen/SelectionDAG/ScheduleDAGSDNodes.cpp
U lib/CodeGen/SelectionDAG/InstrEmitter.cpp
U lib/CodeGen/SelectionDAG/TargetLowering.cpp
U lib/Target/XCore/XCoreISelLowering.cpp
U lib/Target/XCore/XCoreISelLowering.h
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86ISelLowering.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107987 91177308-0d34-0410-b5e6-96231b3b80d8
Add explicit testcases for tail calls within the same module.
Duplicate some code to humor those who think .w doesn't apply on ARM.
Leave this disabled on Thumb1, and add some comments explaining why it's hard
and won't gain much.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107851 91177308-0d34-0410-b5e6-96231b3b80d8
around everywhere, and also give it an InsertPt member, to enable isel
to operate at an arbitrary position within a block, rather than just
appending to a block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107791 91177308-0d34-0410-b5e6-96231b3b80d8
The COPY instruction is intended to replace the target specific copy
instructions for virtual registers as well as the EXTRACT_SUBREG and
INSERT_SUBREG instructions in MachineFunctions. It won't we used in a selection
DAG.
COPY is lowered to native register copies by LowerSubregs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107529 91177308-0d34-0410-b5e6-96231b3b80d8
list of predefined instructions appear. Add some consistency checks.
Ideally, TargetOpcodes.h should be produced by TableGen from Target.td, but it
is hardly worth the effort.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107520 91177308-0d34-0410-b5e6-96231b3b80d8
Given the pattern below as an example:
list<dag> Pattern = [(set RC:$dst, (v4f32 (shufp:src3 RC:$src1,
(mem_frag addr:$src2))))];
The right reference resolving should lead to:
list<dag> Pattern = [(set VR128:$dst, (v4f32 (shufp:src3 VR128:$src1,
(mem_frag addr:$src2))))];
But was yielding:
list<dag> Pattern = [(set VR128:$dst, (v4f32 (shufp VR128:$src1,
(mem_frag addr:$src2))))];
Fix this by passing the right name when creating a new DagInit node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106670 91177308-0d34-0410-b5e6-96231b3b80d8
The attribute class generation support is still somewhat limited.
See the accompanying clang commit for more details.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106174 91177308-0d34-0410-b5e6-96231b3b80d8
call must not be callee-saved; following x86, add a new
regclass to represent this. Also fixes a couple of bugs.
Still disabled by default; Thumb doesn't work yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106053 91177308-0d34-0410-b5e6-96231b3b80d8
the machine instruction representation of the immediate value to be encoded
into an integer with similar fields as the actual VMOV instruction. This makes
things easier for the disassembler, since it can just stuff the bits into the
immediate operand, but harder for the asm printer since it has to decode the
value to be printed. Testcase for the encoding will follow later when MC has
more support for ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105836 91177308-0d34-0410-b5e6-96231b3b80d8
In file included from X86InstrInfo.cpp:16:
X86GenInstrInfo.inc:2789: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2790: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2792: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2793: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2808: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2809: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2816: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2817: error: integer constant is too large for 'long' type
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105524 91177308-0d34-0410-b5e6-96231b3b80d8
A temporary flag -arm-tail-calls defaults to off,
so there is no functional change by default.
Intrepid users may try this; simple cases work
but there are bugs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105413 91177308-0d34-0410-b5e6-96231b3b80d8
The StmtNodes generator has been generalized to allow for the
creation of DeclNodes tables as well, and another emitter was
added for DeclContexts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105164 91177308-0d34-0410-b5e6-96231b3b80d8
of the intrinsics. The goal is to auto-generate both support for GCC-style (vector)
and ARM-style (struct of vector) intrinsics.
This is work in progress, but will be completed soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104910 91177308-0d34-0410-b5e6-96231b3b80d8
This means that our Registers are now ordered R7, R8, R9, R10, R12, ...
Not R1, R10, R11, R12, R2, R3, ...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104745 91177308-0d34-0410-b5e6-96231b3b80d8
A Register with subregisters must also provide SubRegIndices for adressing the
subregisters. TableGen automatically inherits indices for sub-subregisters to
minimize typing.
CompositeIndices may be specified for the weirder cases such as the XMM sub_sd
index that returns the same register, and ARM NEON Q registers where both D
subregs have ssub_0 and ssub_1 sub-subregs.
It is now required that all subregisters are named by an index, and a future
patch will also require inherited subregisters to be named. This is necessary to
allow composite subregister indices to be reduced to a single index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104704 91177308-0d34-0410-b5e6-96231b3b80d8
A Register with subregisters must also provide SubRegIndices for adressing the
subregisters. TableGen automatically inherits indices for sub-subregisters to
minimize typing.
CompositeIndices may be specified for the weirder cases such as the XMM sub_sd
index that returns the same register, and ARM NEON Q registers where both D
subregs have ssub_0 and ssub_1 sub-subregs.
It is now required that all subregisters are named by an index, and a future
patch will also require inherited subregisters to be named. This is necessary to
allow composite subregister indices to be reduced to a single index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104654 91177308-0d34-0410-b5e6-96231b3b80d8
This passes lit tests, but I'll give it a go through the buildbots to smoke out
any remaining places that depend on the old SubRegIndex numbering.
Then I'll remove NumberHack entirely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104615 91177308-0d34-0410-b5e6-96231b3b80d8
structure that represents a mapping without any dependencies on SubRegIndex
numbering.
This brings us closer to being able to remove the explicit SubRegIndex
numbering, and it is now possible to specify any mapping without inventing
*_INVALID register classes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104563 91177308-0d34-0410-b5e6-96231b3b80d8
This is the beginning of purely symbolic subregister indices, but we need a bit
of jiggling before the explicit numeric indices can be completely removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104492 91177308-0d34-0410-b5e6-96231b3b80d8
and %rcr_, leaving just %cr_ which is what people expect.
Updated the disassembler to support this unified register set.
Added a testcase to verify that the registers continue to be
decoded correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103196 91177308-0d34-0410-b5e6-96231b3b80d8
and diagnostic groups. This allows the compiler to group
diagnostics together (e.g. "Logic Warning",
"Format String Warning", etc) like the static analyzer does.
This is not exposed through anything in the compiler yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103050 91177308-0d34-0410-b5e6-96231b3b80d8
sub-register indices and outputs a single super register which is formed from
a consecutive sequence of registers.
This is used as register allocation / coalescing aid and it is useful to
represent instructions that output register pairs / quads. For example,
v1024, v1025 = vload <address>
where v1024 and v1025 forms a register pair.
This really should be modelled as
v1024<3>, v1025<4> = vload <address>
but it would violate SSA property before register allocation is done.
Currently we use insert_subreg to form the super register:
v1026 = implicit_def
v1027 - insert_subreg v1026, v1024, 3
v1028 = insert_subreg v1027, v1025, 4
...
= use v1024
= use v1028
But this adds pseudo live interval overlap between v1024 and v1025.
We can now modeled it as
v1024, v1025 = vload <address>
v1026 = REG_SEQUENCE v1024, 3, v1025, 4
...
= use v1024
= use v1026
After coalescing, it will be
v1026<3>, v1025<4> = vload <address>
...
= use v1026<3>
= use v1026
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@102815 91177308-0d34-0410-b5e6-96231b3b80d8
FU per CPU arch to 32 per intinerary allowing precise modelling of quite
complex pipelines in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101754 91177308-0d34-0410-b5e6-96231b3b80d8
