through as a reference rather than a pointer. There is always *some*
implementation of this available, so this simplifies code by not having
to test for whether it is available or not.
Further, it turns out there were piles of places where SimplifyCFG was
recursing and not passing down either TD or TTI. These are fixed to be
more pedantically consistent even though I don't have any particular
cases where it would matter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171691 91177308-0d34-0410-b5e6-96231b3b80d8
a TargetMachine to construct (and thus isn't always available), to an
analysis group that supports layered implementations much like
AliasAnalysis does. This is a pretty massive change, with a few parts
that I was unable to easily separate (sorry), so I'll walk through it.
The first step of this conversion was to make TargetTransformInfo an
analysis group, and to sink the nonce implementations in
ScalarTargetTransformInfo and VectorTargetTranformInfo into
a NoTargetTransformInfo pass. This allows other passes to add a hard
requirement on TTI, and assume they will always get at least on
implementation.
The TargetTransformInfo analysis group leverages the delegation chaining
trick that AliasAnalysis uses, where the base class for the analysis
group delegates to the previous analysis *pass*, allowing all but tho
NoFoo analysis passes to only implement the parts of the interfaces they
support. It also introduces a new trick where each pass in the group
retains a pointer to the top-most pass that has been initialized. This
allows passes to implement one API in terms of another API and benefit
when some other pass above them in the stack has more precise results
for the second API.
The second step of this conversion is to create a pass that implements
the TargetTransformInfo analysis using the target-independent
abstractions in the code generator. This replaces the
ScalarTargetTransformImpl and VectorTargetTransformImpl classes in
lib/Target with a single pass in lib/CodeGen called
BasicTargetTransformInfo. This class actually provides most of the TTI
functionality, basing it upon the TargetLowering abstraction and other
information in the target independent code generator.
The third step of the conversion adds support to all TargetMachines to
register custom analysis passes. This allows building those passes with
access to TargetLowering or other target-specific classes, and it also
allows each target to customize the set of analysis passes desired in
the pass manager. The baseline LLVMTargetMachine implements this
interface to add the BasicTTI pass to the pass manager, and all of the
tools that want to support target-aware TTI passes call this routine on
whatever target machine they end up with to add the appropriate passes.
The fourth step of the conversion created target-specific TTI analysis
passes for the X86 and ARM backends. These passes contain the custom
logic that was previously in their extensions of the
ScalarTargetTransformInfo and VectorTargetTransformInfo interfaces.
I separated them into their own file, as now all of the interface bits
are private and they just expose a function to create the pass itself.
Then I extended these target machines to set up a custom set of analysis
passes, first adding BasicTTI as a fallback, and then adding their
customized TTI implementations.
The fourth step required logic that was shared between the target
independent layer and the specific targets to move to a different
interface, as they no longer derive from each other. As a consequence,
a helper functions were added to TargetLowering representing the common
logic needed both in the target implementation and the codegen
implementation of the TTI pass. While technically this is the only
change that could have been committed separately, it would have been
a nightmare to extract.
The final step of the conversion was just to delete all the old
boilerplate. This got rid of the ScalarTargetTransformInfo and
VectorTargetTransformInfo classes, all of the support in all of the
targets for producing instances of them, and all of the support in the
tools for manually constructing a pass based around them.
Now that TTI is a relatively normal analysis group, two things become
straightforward. First, we can sink it into lib/Analysis which is a more
natural layer for it to live. Second, clients of this interface can
depend on it *always* being available which will simplify their code and
behavior. These (and other) simplifications will follow in subsequent
commits, this one is clearly big enough.
Finally, I'm very aware that much of the comments and documentation
needs to be updated. As soon as I had this working, and plausibly well
commented, I wanted to get it committed and in front of the build bots.
I'll be doing a few passes over documentation later if it sticks.
Commits to update DragonEgg and Clang will be made presently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171681 91177308-0d34-0410-b5e6-96231b3b80d8
The reason that there are two cases is that the first case handles the unary cases and the second the binary cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171672 91177308-0d34-0410-b5e6-96231b3b80d8
cvtsi2* should parse with an 'l' or 'q' suffix or no suffix at all. No suffix should be treated the same as 'l' suffix. Printing should always print a suffix. Previously we didn't parse or print an 'l' suffix.
cvtt*2si/cvt*2si should parse with an 'l' or 'q' suffix or not suffix at all. No suffix should use the destination register size to choose encoding. Printing should not print a suffix.
Original 'l' suffix issue with cvtsi2* pointed out by Michael Kuperstein.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171668 91177308-0d34-0410-b5e6-96231b3b80d8
pass into the SelectionDAG itself rather than snooping on the
implementation of that pass as exposed by the TargetMachine. This
removes the last direct client of the ScalarTargetTransformInfo class
outside of the TTI pass implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171625 91177308-0d34-0410-b5e6-96231b3b80d8
This isn't optimal either but fixes a massive compile time regression from the
attribute uniquing work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171624 91177308-0d34-0410-b5e6-96231b3b80d8
interfaces which could be extracted from it, and must be provided on
construction, to a chained analysis group.
The end goal here is that TTI works much like AA -- there is a baseline
"no-op" and target independent pass which is in the group, and each
target can expose a target-specific pass in the group. These passes will
naturally chain allowing each target-specific pass to delegate to the
generic pass as needed.
In particular, this will allow a much simpler interface for passes that
would like to use TTI -- they can have a hard dependency on TTI and it
will just be satisfied by the stub implementation when that is all that
is available.
This patch is a WIP however. In particular, the "stub" pass is actually
the one and only pass, and everything there is implemented by delegating
to the target-provided interfaces. As a consequence the tools still have
to explicitly construct the pass. Switching targets to provide custom
passes and sinking the stub behavior into the NoTTI pass is the next
step.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171621 91177308-0d34-0410-b5e6-96231b3b80d8
VectorTargetTransformInfo into the TargetTransformInfo pass,
implementing them be delegating back out to the two subobjects.
This is the first step to folding the interfaces together and making
TargetTransformInfo a normal analysis pass (specifically an analysis
group which targets can provide target-specific analysis pass
implementations of).
No callers are migrated here, this just stubs out the interface. Next
step will be to migrate all the callers to directly operate on TTI
instead of STTI or VTTI respectively. That will allow replacing the
machinery for delivering TTI without changing every caller at once.
WIP, I promise all the duplicated interfaces will be removed in the end,
this just decouples the steps of the process.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171615 91177308-0d34-0410-b5e6-96231b3b80d8
values -- that's not required to fix the bug that was cropping up, and
the values selected made the enumeration's underlying type signed and
introduced some warnings. This fixes the -Werror build.
The underlying issue here was that the DenseMapInfo was casting values
completely outside the range of the underlying storage of the
enumeration to the enumeration's type. GCC went and "optimized" that
into infloops and other misbehavior. By providing designated special
values for these keys in the dense map, we ensure they are indeed
representable and that they won't be used for anything else.
It might be better to reuse None for the empty key and have the
tombstone share the value of the sentinel enumerator, but honestly
having 2 extra enumerators seemed not to matter and this seems a bit
simpler. I'll let Bill shuffle this around (or ask me to shuffle it
around) if he prefers it to look a different way.
I also made the switch a bit more clear (and produce a better assert)
that the enumerators are *never* going to show up and are errors if they
do.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171614 91177308-0d34-0410-b5e6-96231b3b80d8
This change essentially reverts r87069 which came without a test case. It
causes no regressions in the GDB 7.5 test suite & fixes 25 xfails (commit
to the test suite to follow). If anyone can present a test case that
demonstrates why this check is necessary I'd be happy to account for it in one
way or another.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171609 91177308-0d34-0410-b5e6-96231b3b80d8
