of Value deletions and RAUWs, instead of relying on ScalarEvolution's
Scalars map being notified, as that's complicated at best, and
insufficient in general.
This means SCEVUnknown needs a non-trivial destructor, so introduce
a mechanism to allow ScalarEvolution to locate all the SCEVUnknowns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110086 91177308-0d34-0410-b5e6-96231b3b80d8
extend it to handle the case where multiple RAUWs affect a single
SCEVUnknown.
Add a ScalarEvolution unittest to test for this situation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109705 91177308-0d34-0410-b5e6-96231b3b80d8
* contains(Loop), * getOutermostLoop()
* Improve getNameStr() to return a sensible name, if basic blocks are not named.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109490 91177308-0d34-0410-b5e6-96231b3b80d8
that the values they refer to aren't being deleted underneath them.
Make sure these containters get cleared by clear(), which IndVarSimplify
and LSR both use before deleting instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109478 91177308-0d34-0410-b5e6-96231b3b80d8
The RegionInfo pass detects single entry single exit regions in a function,
where a region is defined as any subgraph that is connected to the remaining
graph at only two spots.
Furthermore an hierarchical region tree is built.
Use it by calling "opt -regions analyze" or "opt -view-regions".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109089 91177308-0d34-0410-b5e6-96231b3b80d8
Make MDNode::destroy private.
Fix the one thing that used MDNode::destroy, outside of MDNode itself.
One should never delete or destroy an MDNode explicitly. MDNodes
implicitly go away when there are no references to them (implementation
details aside).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109028 91177308-0d34-0410-b5e6-96231b3b80d8
Determine which loop exit blocks need a 'pre-exit' block inserted.
Recognize when this would be impossible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108941 91177308-0d34-0410-b5e6-96231b3b80d8
Still very much under development. Comments and fixes will be forthcoming.
(This commit includes some small tweaks to LiveIntervals & LoopInfo to support the splitter)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108615 91177308-0d34-0410-b5e6-96231b3b80d8
(by caching the result we save a potentially expensive dereference)
also use typedefs to shorten type declarations
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107883 91177308-0d34-0410-b5e6-96231b3b80d8
interface needs implementations to be consistent, so any code which
wants to support different semantics must use a different interface.
It's not currently worthwhile to add a new interface for this new
concept.
Document that AliasAnalysis doesn't support cross-function queries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107776 91177308-0d34-0410-b5e6-96231b3b80d8
properly handles instructions and arguments defined in different
functions, or across recursive function iterations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107109 91177308-0d34-0410-b5e6-96231b3b80d8
interprocedurally. Note that as of this writing, existing alias
analysis passes are not prepared to be used interprocedurally.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107013 91177308-0d34-0410-b5e6-96231b3b80d8
scrounging through SCEVUnknown contents and SCEVNAryExpr operands;
instead just do a simple deterministic comparison of the precomputed
hash data.
Also, since this is more precise, it eliminates the need for the slow
N^2 duplicate detection code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105540 91177308-0d34-0410-b5e6-96231b3b80d8
there could be multiple subexpressions within a single expansion which
require insert point adjustment. This fixes PR7306.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105510 91177308-0d34-0410-b5e6-96231b3b80d8
on RAUW of functions, this is a correctness issue instead of a mere memory
usage problem.
No testcase until the new MergeFunctions can land.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103653 91177308-0d34-0410-b5e6-96231b3b80d8
refactored out of ScalarEvolution::isImpliedCond, which will be updated
to use this new utility routine soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@102229 91177308-0d34-0410-b5e6-96231b3b80d8
just ask ScalarEvolution for it on demand. This helps IVUsers be more robust
in the case of expressions changing underneath it. This fixes PR6862.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101819 91177308-0d34-0410-b5e6-96231b3b80d8
explicitly split into stride-and-offset pairs. Also, add the
ability to track multiple post-increment loops on the same expression.
This refines the concept of "normalizing" SCEV expressions used for
to post-increment uses, and introduces a dedicated utility routine for
normalizing and denormalizing expressions.
This fixes the expansion of expressions which are post-increment users
of more than one loop at a time. More broadly, this takes LSR another
step closer to being able to reason about more than one loop at a time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100699 91177308-0d34-0410-b5e6-96231b3b80d8
source addition. Apparently the buildbots were wrong about failures.
---
Add some switches helpful for debugging:
-print-before=<Pass Name>
Dump IR before running pass <Pass Name>.
-print-before-all
Dump IR before running each pass.
-print-after-all
Dump IR after running each pass.
These are helpful when tracking down a miscompilation. It is easy to
get IR dumps and do diffs on them, etc.
To make this work well, add a new getPrinterPass API to Pass so that
each kind of pass (ModulePass, FunctionPass, etc.) can create a Pass
suitable for dumping out the kind of object the Pass works on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100249 91177308-0d34-0410-b5e6-96231b3b80d8
representation. This eliminates the 'DILocation' MDNodes for
file/line/col tuples from -O0 -g codegen.
This remove the old DebugLoc class, making it a typedef for DebugLoc,
I'll rename NewDebugLoc next.
I didn't update the JIT to use the new apis, so it will continue to
work, but be as slow as before. Someone should eventually do this
or, better yet, rip out the JIT debug info stuff and build the JIT
on top of MC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100209 91177308-0d34-0410-b5e6-96231b3b80d8
<string> include. For some reason the buildbot choked on this while my
builds did not. It's probably due to a difference in system headers.
---
Add some switches helpful for debugging:
-print-before=<Pass Name>
Dump IR before running pass <Pass Name>.
-print-before-all
Dump IR before running each pass.
-print-after-all
Dump IR after running each pass.
These are helpful when tracking down a miscompilation. It is easy to
get IR dumps and do diffs on them, etc.
To make this work well, add a new getPrinterPass API to Pass so that
each kind of pass (ModulePass, FunctionPass, etc.) can create a Pass
suitable for dumping out the kind of object the Pass works on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100204 91177308-0d34-0410-b5e6-96231b3b80d8
-print-before=<Pass Name>
Dump IR before running pass <Pass Name>.
-print-before-all
Dump IR before running each pass.
-print-after-all
Dump IR after running each pass.
These are helpful when tracking down a miscompilation. It is easy to
get IR dumps and do diffs on them, etc.
To make this work well, add a new getPrinterPass API to Pass so that
each kind of pass (ModulePass, FunctionPass, etc.) can create a Pass
suitable for dumping out the kind of object the Pass works on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100143 91177308-0d34-0410-b5e6-96231b3b80d8
so that the SCEVExpander doesn't retain a dangling pointer as its
insert position. The dangling pointer in this case wasn't ever used
to insert new instructions, but it was causing trouble with
SCEVExpander's code for automatically advancing its insert position
past debug intrinsics.
This fixes use-after-free errors that valgrind noticed in
test/Transforms/IndVarSimplify/2007-06-06-DeleteDanglesPtr.ll and
test/Transforms/IndVarSimplify/exit_value_tests.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99036 91177308-0d34-0410-b5e6-96231b3b80d8
use-before-def errors in SCEVExpander-produced code in sqlite3 when debug
info with optimization is enabled, though the testcases for this are
dependent on use-list order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99001 91177308-0d34-0410-b5e6-96231b3b80d8
BumpPtrAllocator-allocated region to allow it to be stored in a more
compact form and to avoid the need for a non-trivial destructor call.
Use this new mechanism in ScalarEvolution instead of
FastFoldingSetNode to avoid leaking memory in the case where a
FoldingSetNodeID uses heap storage, and to reduce overall memory
usage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98829 91177308-0d34-0410-b5e6-96231b3b80d8
pointer and length, and allocate the arrays in ScalarEvolution's
BumpPtrAllocator, so that they get released when their owning
SCEV gets released. SCEVs are immutable, so they don't need to worry
about operand array resizing. This fixes a memory leak reported
in PR6637.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98755 91177308-0d34-0410-b5e6-96231b3b80d8
The Caller cost info would be reset everytime a callee was inlined. If the
caller has lots of calls and there is some mutual recursion going on, the
caller cost info could be calculated many times.
This patch reduces inliner runtime from 240s to 0.5s for a function with 20000
small function calls.
This is a more conservative version of r98089 that doesn't break the clang
test CodeGenCXX/temp-order.cpp. That test relies on rather extreme inlining
for constant folding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98099 91177308-0d34-0410-b5e6-96231b3b80d8
The Caller cost info would be reset everytime a callee was inlined. If the
caller has lots of calls and there is some mutual recursion going on, the
caller cost info could be calculated many times.
This patch reduces inliner runtime from 240s to 0.5s for a function with 20000
small function calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98089 91177308-0d34-0410-b5e6-96231b3b80d8
This patch updates LLVMDebugVersion to 8.
Debug info descriptors encoded using LLVMDebugVersion 7 is supported.
Corresponding llvmgcc and clang FE commits are required.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98020 91177308-0d34-0410-b5e6-96231b3b80d8
This is a first step towards eliminating unncessary constructor checks in light weight DIDescriptor wrappers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97947 91177308-0d34-0410-b5e6-96231b3b80d8
Add a missing interface to be able to call findNearestCommonDominator
for a PostDominanceTree. The function itself is already implemented in
DominatorTreeBase. The interface however was only added to the
DominatorTree class, but not the PostDominatorClass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97915 91177308-0d34-0410-b5e6-96231b3b80d8
argument is non-null, pass it along to PHITranslateSubExpr so that it can
prefer using existing values that dominate the PredBB, instead of just
blindly picking the first equivalent value that it finds on a uselist.
Also when the DominatorTree is specified, have PHITranslateValue filter
out any result that does not dominate the PredBB. This is basically just
refactoring the check that used to be in GetAvailablePHITranslatedSubExpr
and also in GVN.
Despite my initial expectations, this change does not affect the results
of GVN for any testcases that I could find, but it should help compile time.
Before this change, if PHITranslateSubExpr picked a value that does not
dominate, PHITranslateWithInsertion would then insert a new value, which GVN
would later determine to be redundant and would replace. By picking a good
value to begin with, we save GVN the extra work of inserting and then
replacing a new value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97010 91177308-0d34-0410-b5e6-96231b3b80d8
a loop exit value, so that if a loop gets deleted, ScalarEvolution
isn't stick holding on to dangling SCEVAddRecExprs for that loop. This
fixes PR6339.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96626 91177308-0d34-0410-b5e6-96231b3b80d8
insert location has become an "inserted" instruction since the time
it was saved. If so, advance to the first non-"inserted" instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96203 91177308-0d34-0410-b5e6-96231b3b80d8
current insertion point, advance the current insertion point.
This avoids a use-before-def situation in a testcase extracted
from clang which is difficult to reduce to a reasonable-sized
regression test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96151 91177308-0d34-0410-b5e6-96231b3b80d8
SCEVAddRecExpr doesn't necessarily dominate blocks merely dominated
by all of its operands. This fixes an abort compiling 403.gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96056 91177308-0d34-0410-b5e6-96231b3b80d8
bug fixes, and with improved heuristics for analyzing foreign-loop
addrecs.
This change also flattens IVUsers, eliminating the stride-oriented
groupings, which makes it easier to work with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95975 91177308-0d34-0410-b5e6-96231b3b80d8
than int. This will make it more convenient for LSR, which does
a lot of things with int64_t offsets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95281 91177308-0d34-0410-b5e6-96231b3b80d8
cases, and implement target-independent folding rules for alignof and
offsetof. Also, reassociate reassociative operators when it leads to
more folding.
Generalize ScalarEvolution's isOffsetOf to recognize offsetof on
arrays. Rename getAllocSizeExpr to getSizeOfExpr, and getFieldOffsetExpr
to getOffsetOfExpr, for consistency with analagous ConstantExpr routines.
Make the target-dependent folder promote GEP array indices to
pointer-sized integers, to make implicit casting explicit and exposed
to subsequent folding.
And add a bunch of testcases for this new functionality, and a bunch
of related existing functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94987 91177308-0d34-0410-b5e6-96231b3b80d8
use plain SCEVUnknowns with ConstantExpr::getSizeOf and
ConstantExpr::getOffsetOf constants. This eliminates a bunch of
special-case code.
Also add code for pattern-matching these expressions, for clients that
want to recognize them.
Move ScalarEvolution's logic for expanding array and vector sizeof
expressions into an element count times the element size, to expose
the multiplication to subsequent folding, into the regular constant
folder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94737 91177308-0d34-0410-b5e6-96231b3b80d8
After running a batch of measurements, it is clear that the inliner metrics
need some adjustments:
Own argument bonus: 20 -> 5
Outgoing argument penalty: 0 -> 5
Alloca bonus: 10 -> 5
Constant instr bonus: 7 -> 5
Dead successor bonus: 40 -> 5*(avg instrs/block)
The new cost metrics are generaly 25 points higher than before, so we may need
to move thresholds.
With this change, InlineConstants::CallPenalty becomes a political correction:
if (!isa<IntrinsicInst>(II) && !callIsSmall(CS.getCalledFunction()))
NumInsts += InlineConstants::CallPenalty + CS.arg_size();
The code size is accurately modelled by CS.arg_size(). CallPenalty is added
because calls tend to take a long time, so it may not be worth it to inline a
function with lots of calls.
All of the political corrections are in the InlineConstants namespace:
IndirectCallBonus, CallPenalty, LastCallToStaticBonus, ColdccPenalty,
NoreturnPenalty.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94615 91177308-0d34-0410-b5e6-96231b3b80d8
This new version is much more aggressive about doing "full" reduction in
cases where it reduces register pressure, and also more aggressive about
rewriting induction variables to count down (or up) to zero when doing so
reduces register pressure.
It currently uses fairly simplistic algorithms for finding reuse
opportunities, but it introduces a new framework allows it to combine
multiple strategies at once to form hybrid solutions, instead of doing
all full-reduction or all base+index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94061 91177308-0d34-0410-b5e6-96231b3b80d8
form of an expression. This is the expression without the
post-increment adjustment made, which is useful in determining
which registers will be used by the expansion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93921 91177308-0d34-0410-b5e6-96231b3b80d8
Nodes that had children outside of the post dominator tree (infinite loops)
where removed from the post dominator tree. This seems to be wrong. Leave them
in the tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93633 91177308-0d34-0410-b5e6-96231b3b80d8
Move the DOTGraphTraits dotty printer/viewer templates, that were developed for
the dominance tree into their own header file. This will allow reuse in future
passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93632 91177308-0d34-0410-b5e6-96231b3b80d8
This patch also cleans up code that expects there to be a bitcast in the first argument and testcases that call llvm.dbg.declare.
It also strips old llvm.dbg.declare intrinsics that did not pass metadata as the first argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93531 91177308-0d34-0410-b5e6-96231b3b80d8
This patch also cleans up code that expects there to be a bitcast in the first argument and testcases that call llvm.dbg.declare.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93504 91177308-0d34-0410-b5e6-96231b3b80d8
Make InsertDbgValueIntrinsic() and get Offset take and recieve a uint64_t.
Get constness correct for getVariable() and getValue().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93149 91177308-0d34-0410-b5e6-96231b3b80d8
Compare the dominance information calculated using a dominance tree walk to the
information calculated based on DFS numbers, if XDEBUG is enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92969 91177308-0d34-0410-b5e6-96231b3b80d8
Remove a FIXME and unify code that was necessary to work around broken
updateDFSNumbers(). Before updateDFSNumbers() did not work correctly for post
dominators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92968 91177308-0d34-0410-b5e6-96231b3b80d8
The DFS number calculation for postdominators was broken. In the case of
multiple exits that form the post dominator root nodes, do not iterate over
all exits, but start from the virtual root node. Otherwise bbs, that are not
post dominated by any exit but by the virtual root node, will never be assigned
a DFS number.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92967 91177308-0d34-0410-b5e6-96231b3b80d8
memcpy, memset and other intrinsics that only access their arguments
to be readnone if the intrinsic's arguments all point to local memory.
This improves the testcase in the README to readonly, but it could in
theory be made readnone, however this would involve more sophisticated
analysis that looks through the memcpy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92829 91177308-0d34-0410-b5e6-96231b3b80d8
instead of stored. This reduces memdep memory usage, and also eliminates a bunch of
weakvh's. This speeds up gvn on gcc.c-torture/20001226-1.c from 23.9s to 8.45s (2.8x)
on a different machine than earlier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91885 91177308-0d34-0410-b5e6-96231b3b80d8
contains another loop, or an instruction. The loop form is
substantially more efficient on large loops than the typical
code it replaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91654 91177308-0d34-0410-b5e6-96231b3b80d8
of 91296 that caused trouble -- the Processed list needs to be
preserved for the livetime of the pass, as AddUsersIfInteresting
is called from other passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91641 91177308-0d34-0410-b5e6-96231b3b80d8
isPodLike type trait. This is a generally useful type trait for
more than just DenseMap, and we really care about whether something
acts like a pod, not whether it really is a pod.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91421 91177308-0d34-0410-b5e6-96231b3b80d8
phi translation of complex expressions like &A[i+1]. This has the
following benefits:
1. The phi translation logic is all contained in its own class with
a strong interface and verification that it is self consistent.
2. The logic is more correct than before. Previously, if intermediate
expressions got PHI translated, we'd miss the update and scan for
the wrong pointers in predecessor blocks. @phi_trans2 is a testcase
for this.
3. We have a lot less code in memdep.
We can handle phi translation across blocks of things like @phi_trans3,
which is pretty insane :).
This patch should fix the miscompiles of 255.vortex, and I tested it
with a bootstrap of llvm-gcc, llvm-test and dejagnu of course.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90926 91177308-0d34-0410-b5e6-96231b3b80d8
The semantics of llvm.dbg.value are that starting from where it is executed, an offset into the specified user source variable is specified to get a new value.
An example:
call void @llvm.dbg.value(metadata !{ i32 7 }, i64 0, metadata !2)
Here the user source variable associated with metadata #2 gets the value "i32 7" at offset 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90788 91177308-0d34-0410-b5e6-96231b3b80d8
gvn (this is just a skeleton so far). This will ultimately be used
to fix a nasty miscompilation with GVN.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90518 91177308-0d34-0410-b5e6-96231b3b80d8
where it is not available. It's unclear how to get this inserted
computation into GVN's scalar availability sets, Owen, help? :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89997 91177308-0d34-0410-b5e6-96231b3b80d8
The hasNoModRefInfoForCalls isn't worth it as a filter because
basicaa provides m/r info and everything chains to it, so remove
it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89599 91177308-0d34-0410-b5e6-96231b3b80d8
it may be used in contexts where preheader insertion may have failed due
to an indirectbr.
Make LoopSimplify's LoopSimplify::SeparateNestedLoop properly fail in
the case that it would require splitting an indirectbr edge.
These fix PR5502.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89484 91177308-0d34-0410-b5e6-96231b3b80d8
if it is not ultimately captured. Teach BasicAliasAnalysis that a
local object address which does not escape and is never stored does
not alias with a value resulting from a load.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89398 91177308-0d34-0410-b5e6-96231b3b80d8
