When loading immediates into a GR32, the port prefered LHI, followed by
LLILH or LLILL, followed by IILF. LHI and IILF are natural 32-bit
operations, but LLILH and LLILL also clear the upper 32 bits of the register.
This was represented as taking a 32-bit subreg of a 64-bit assignment.
Using subregs for something as simple as a move immediate was probably
a bad idea. Also, I have patches to add support for the high-word facility,
and we don't want something like LLILH and LLILL to stop the high word of
the same GPR from being used.
This patch therefore uses LHI and IILF to begin with and adds a late
machine-specific pass to use LLILH and LLILL if the other half of the
register is not live. The high-word patches extend this behavior to
IIHF, LLIHL and LLIHH.
No behavioral change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191363 91177308-0d34-0410-b5e6-96231b3b80d8
Without explicit dependencies, both per-file action and in-CommonTableGen action could run in parallel.
It races to emit *.inc files simultaneously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187780 91177308-0d34-0410-b5e6-96231b3b80d8
Perhaps predictably, doing comparison elimination on the fly during
SystemZLongBranch turned out to be a bad idea. The next patches make
use of LOAD AND TEST and BRANCH ON COUNT, both of which require
changes to earlier instructions.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187718 91177308-0d34-0410-b5e6-96231b3b80d8
Use MVC for memcpy in cases where a single MVC is enough. Using MVC is
a win for longer copies too, but I'll leave that for later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185802 91177308-0d34-0410-b5e6-96231b3b80d8
Before this change, the SystemZ backend would use BRCL for all branches
and only consider shortening them to BRC when generating an object file.
E.g. a branch on equal would use the JGE alias of BRCL in assembly output,
but might be shortened to the JE alias of BRC in ELF output. This was
a useful first step, but it had two problems:
(1) The z assembler isn't traditionally supposed to perform branch shortening
or branch relaxation. We followed this rule by not relaxing branches
in assembler input, but that meant that generating assembly code and
then assembling it would not produce the same result as going directly
to object code; the former would give long branches everywhere, whereas
the latter would use short branches where possible.
(2) Other useful branches, like COMPARE AND BRANCH, do not have long forms.
We would need to do something else before supporting them.
(Although COMPARE AND BRANCH does not change the condition codes,
the plan is to model COMPARE AND BRANCH as a CC-clobbering instruction
during codegen, so that we can safely lower it to a separate compare
and long branch where necessary. This is not a valid transformation
for the assembler proper to make.)
This patch therefore moves branch relaxation to a pre-emit pass.
For now, calls are still shortened from BRASL to BRAS by the assembler,
although this too is not really the traditional behaviour.
The first test takes about 1.5s to run, and there are likely to be
more tests in this vein once further branch types are added. The feeling
on IRC was that 1.5s is a bit much for a single test, so I've restricted
it to SystemZ hosts for now.
The patch exposes (and fixes) some typos in the main CodeGen/SystemZ tests.
A later patch will remove the {{g}}s from that directory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182274 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the actual lib/Target/SystemZ target files necessary to
implement the SystemZ target. Note that at this point, the target
cannot yet be built since the configure bits are missing. Those
will be provided shortly by a follow-on patch.
This version of the patch incorporates feedback from reviews by
Chris Lattner and Anton Korobeynikov. Thanks to all reviewers!
Patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181203 91177308-0d34-0410-b5e6-96231b3b80d8
specified in the same file that the library itself is created. This is
more idiomatic for CMake builds, and also allows us to correctly specify
dependencies that are missed due to bugs in the GenLibDeps perl script,
or change from compiler to compiler. On Linux, this returns CMake to
a place where it can relably rebuild several targets of LLVM.
I have tried not to change the dependencies from the ones in the current
auto-generated file. The only places I've really diverged are in places
where I was seeing link failures, and added a dependency. The goal of
this patch is not to start changing the dependencies, merely to move
them into the correct location, and an explicit form that we can control
and change when necessary.
This also removes a serialization point in the build because we don't
have to scan all the libraries before we begin building various tools.
We no longer have a step of the build that regenerates a file inside the
source tree. A few other associated cleanups fall out of this.
This isn't really finished yet though. After talking to dgregor he urged
switching to a single CMake macro to construct libraries with both
sources and dependencies in the arguments. Migrating from the two macros
to that style will be a follow-up patch.
Also, llvm-config is still generated with GenLibDeps.pl, which means it
still has slightly buggy dependencies. The internal CMake
'llvm-config-like' macro uses the correct explicitly specified
dependencies however. A future patch will switch llvm-config generation
(when using CMake) to be based on these deps as well.
This may well break Windows. I'm getting a machine set up now to dig
into any failures there. If anyone can chime in with problems they see
or ideas of how to solve them for Windows, much appreciated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136433 91177308-0d34-0410-b5e6-96231b3b80d8
The first problem to fix is to stop creating synthetic *Table_gen
targets next to all of the LLVM libraries. These had no real effect as
CMake specifies that add_custom_command(OUTPUT ...) directives (what the
'tablegen(...)' stuff expands to) are implicitly added as dependencies
to all the rules in that CMakeLists.txt.
These synthetic rules started to cause problems as we started more and
more heavily using tablegen files from *subdirectories* of the one where
they were generated. Within those directories, the set of tablegen
outputs was still available and so these synthetic rules added them as
dependencies of those subdirectories. However, they were no longer
properly associated with the custom command to generate them. Most of
the time this "just worked" because something would get to the parent
directory first, and run tablegen there. Once run, the files existed and
the build proceeded happily. However, as more and more subdirectories
have started using this, the probability of this failing to happen has
increased. Recently with the MC refactorings, it became quite common for
me when touching a large enough number of targets.
To add insult to injury, several of the backends *tried* to fix this by
adding explicit dependencies back to the parent directory's tablegen
rules, but those dependencies didn't work as expected -- they weren't
forming a linear chain, they were adding another thread in the race.
This patch removes these synthetic rules completely, and adds a much
simpler function to declare explicitly that a collection of tablegen'ed
files are referenced by other libraries. From that, we can add explicit
dependencies from the smaller libraries (such as every architectures
Desc library) on this and correctly form a linear sequence. All of the
backends are updated to use it, sometimes replacing the existing attempt
at adding a dependency, sometimes adding a previously missing dependency
edge.
Please let me know if this causes any problems, but it fixes a rather
persistent and problematic source of build flakiness on our end.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136023 91177308-0d34-0410-b5e6-96231b3b80d8
backend. Moved some MCAsmInfo files down into the MCTargetDesc
sublibraries, removed some (i suspect long) dead files from other parts
of the CMake build, etc. Also copied the include directory hack from the
Makefile.
Finally, updated the lib deps. I spot checked this, and think its
correct, but review appreciated there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135234 91177308-0d34-0410-b5e6-96231b3b80d8
target machine from those that are only needed by codegen. The goal is to
sink the essential target description into MC layer so we can start building
MC based tools without needing to link in the entire codegen.
First step is to refactor TargetRegisterInfo. This patch added a base class
MCRegisterInfo which TargetRegisterInfo is derived from. Changed TableGen to
separate register description from the rest of the stuff.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133782 91177308-0d34-0410-b5e6-96231b3b80d8
of testing for its presence at cmake time.
This way the build automatically regenerates the makefiles when a svn
update brings in a new sublibrary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126068 91177308-0d34-0410-b5e6-96231b3b80d8
that should be split out is the InstPrinter (if a target is mc'ized).
This change makes all the targets be consistent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119056 91177308-0d34-0410-b5e6-96231b3b80d8
