that the values they refer to aren't being deleted underneath them.
Make sure these containters get cleared by clear(), which IndVarSimplify
and LSR both use before deleting instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109478 91177308-0d34-0410-b5e6-96231b3b80d8
there could be multiple subexpressions within a single expansion which
require insert point adjustment. This fixes PR7306.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105510 91177308-0d34-0410-b5e6-96231b3b80d8
explicitly split into stride-and-offset pairs. Also, add the
ability to track multiple post-increment loops on the same expression.
This refines the concept of "normalizing" SCEV expressions used for
to post-increment uses, and introduces a dedicated utility routine for
normalizing and denormalizing expressions.
This fixes the expansion of expressions which are post-increment users
of more than one loop at a time. More broadly, this takes LSR another
step closer to being able to reason about more than one loop at a time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100699 91177308-0d34-0410-b5e6-96231b3b80d8
so that the SCEVExpander doesn't retain a dangling pointer as its
insert position. The dangling pointer in this case wasn't ever used
to insert new instructions, but it was causing trouble with
SCEVExpander's code for automatically advancing its insert position
past debug intrinsics.
This fixes use-after-free errors that valgrind noticed in
test/Transforms/IndVarSimplify/2007-06-06-DeleteDanglesPtr.ll and
test/Transforms/IndVarSimplify/exit_value_tests.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99036 91177308-0d34-0410-b5e6-96231b3b80d8
use-before-def errors in SCEVExpander-produced code in sqlite3 when debug
info with optimization is enabled, though the testcases for this are
dependent on use-list order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99001 91177308-0d34-0410-b5e6-96231b3b80d8
insert location has become an "inserted" instruction since the time
it was saved. If so, advance to the first non-"inserted" instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96203 91177308-0d34-0410-b5e6-96231b3b80d8
current insertion point, advance the current insertion point.
This avoids a use-before-def situation in a testcase extracted
from clang which is difficult to reduce to a reasonable-sized
regression test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96151 91177308-0d34-0410-b5e6-96231b3b80d8
bug fixes, and with improved heuristics for analyzing foreign-loop
addrecs.
This change also flattens IVUsers, eliminating the stride-oriented
groupings, which makes it easier to work with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95975 91177308-0d34-0410-b5e6-96231b3b80d8
use plain SCEVUnknowns with ConstantExpr::getSizeOf and
ConstantExpr::getOffsetOf constants. This eliminates a bunch of
special-case code.
Also add code for pattern-matching these expressions, for clients that
want to recognize them.
Move ScalarEvolution's logic for expanding array and vector sizeof
expressions into an element count times the element size, to expose
the multiplication to subsequent folding, into the regular constant
folder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94737 91177308-0d34-0410-b5e6-96231b3b80d8
This new version is much more aggressive about doing "full" reduction in
cases where it reduces register pressure, and also more aggressive about
rewriting induction variables to count down (or up) to zero when doing so
reduces register pressure.
It currently uses fairly simplistic algorithms for finding reuse
opportunities, but it introduces a new framework allows it to combine
multiple strategies at once to form hybrid solutions, instead of doing
all full-reduction or all base+index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94061 91177308-0d34-0410-b5e6-96231b3b80d8
TargetData is not present. It still uses TargetData when available.
This generalization also fixed some limitations in the TargetData
case; the attached testcase covers this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79344 91177308-0d34-0410-b5e6-96231b3b80d8
This helps it avoid reusing an instruction that doesn't dominate all
of the users, in cases where the original instruction was inserted
before all of the users were known. This may result in redundant
expansions of sub-expressions that depend on loop-unpredictable values
in some cases, however this isn't very common, and it primarily impacts
IndVarSimplify, so GVN can be expected to clean these up.
This eliminates the need for IndVarSimplify's FixUsesBeforeDefs,
which fixes several bugs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74352 91177308-0d34-0410-b5e6-96231b3b80d8
sending SCEVUnknowns to expandAddToGEP. This avoids the need for
expandAddToGEP to bend the rules and peek into SCEVUnknown
expressions.
Factor out the code for testing whether a SCEV can be factored by
a constant for use in a GEP index. This allows it to handle
SCEVAddRecExprs, by recursing.
As a result, SCEVExpander can now put more things in GEP indices,
so it emits fewer explicit mul instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72366 91177308-0d34-0410-b5e6-96231b3b80d8
Fix by clearing the rewriter cache before deleting the trivially dead
instructions.
Also make InsertedExpressions use an AssertingVH to catch these
bugs easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72364 91177308-0d34-0410-b5e6-96231b3b80d8
instructions. It attempts to create high-level multi-operand GEPs,
though in cases where this isn't possible it falls back to casting
the pointer to i8* and emitting a GEP with that. Using GEP instructions
instead of ptrtoint+arithmetic+inttoptr helps pointer analyses that
don't use ScalarEvolution, such as BasicAliasAnalysis.
Also, make the AddrModeMatcher more aggressive in handling GEPs.
Previously it assumed that operand 0 of a GEP would require a register
in almost all cases. It now does extra checking and can do more
matching if operand 0 of the GEP is foldable. This fixes a problem
that was exposed by SCEVExpander using GEPs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72093 91177308-0d34-0410-b5e6-96231b3b80d8
with the persistent insertion point, and change IndVars to make
use of it. This fixes a bug where IndVars was holding on to a
stale insertion point and forcing the SCEVExpander to continue to
use it.
This fixes PR4038.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69892 91177308-0d34-0410-b5e6-96231b3b80d8
have pointer types, though in contrast to C pointer types, SCEV
addition is never implicitly scaled. This not only eliminates the
need for special code like IndVars' EliminatePointerRecurrence
and LSR's own GEP expansion code, it also does a better job because
it lets the normal optimizations handle pointer expressions just
like integer expressions.
Also, since LLVM IR GEPs can't directly index into multi-dimensional
VLAs, moving the GEP analysis out of client code and into the SCEV
framework makes it easier for clients to handle multi-dimensional
VLAs the same way as other arrays.
Some existing regression tests show improved optimization.
test/CodeGen/ARM/2007-03-13-InstrSched.ll in particular improved to
the point where if-conversion started kicking in; I turned it off
for this test to preserve the intent of the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69258 91177308-0d34-0410-b5e6-96231b3b80d8
take into account the instrucion pointed by InsertPt. Thanks to it,
returning the new value of InsertPt to the InsertBinop() caller can be
avoided. The bug was, actually, in visitAddRecExpr() method which wasn't
correctly handling changes of InsertPt. There shouldn't be any
performance regression, as -gvn pass (run after -indvars) removes any
redundant binops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52291 91177308-0d34-0410-b5e6-96231b3b80d8
