This commit teaches DAG to reassociate vector ops, which in turn enables
constant folding of vector op chains that appear later on during custom lowering
and DAG combine.
Reviewed by Andrea Di Biagio
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199135 91177308-0d34-0410-b5e6-96231b3b80d8
can be used by both the new pass manager and the old.
This removes it from any of the virtual mess of the pass interfaces and
lets it derive cleanly from the DominatorTreeBase<> template. In turn,
tons of boilerplate interface can be nuked and it turns into a very
straightforward extension of the base DominatorTree interface.
The old analysis pass is now a simple wrapper. The names and style of
this split should match the split between CallGraph and
CallGraphWrapperPass. All of the users of DominatorTree have been
updated to match using many of the same tricks as with CallGraph. The
goal is that the common type remains the resulting DominatorTree rather
than the pass. This will make subsequent work toward the new pass
manager significantly easier.
Also in numerous places things became cleaner because I switched from
re-running the pass (!!! mid way through some other passes run!!!) to
directly recomputing the domtree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199104 91177308-0d34-0410-b5e6-96231b3b80d8
This is a precursor to breaking the pass that computes the DominatorTree
apart from the concrete DominatorTree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199103 91177308-0d34-0410-b5e6-96231b3b80d8
support notionally const queries even though they may trigger DFS
numbering updates.
The updating of DFS numbers and tracking of slow queries do not mutate
the observable state of the domtree. They should be const to
differentiate them from the APIs which mutate the tree directly to do
incremental updates.
This will make it possible in a world where the DominatorTree is not
a pass but merely the result of running a pass to derive DominatorTree
from the base class as it was originally designed, removing a huge
duplication of API in DominatorTree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199101 91177308-0d34-0410-b5e6-96231b3b80d8
trees into the Support library.
These are all expressed in terms of the generic GraphTraits and CFG,
with no reliance on any concrete IR types. Putting them in support
clarifies that and makes the fact that the static analyzer in Clang uses
them much more sane. When moving the Dominators.h file into the IR
library I claimed that this was the right home for it but not something
I planned to work on. Oops.
So why am I doing this? It happens to be one step toward breaking the
requirement that IR verification can only be performed from inside of
a pass context, which completely blocks the implementation of
verification for the new pass manager infrastructure. Fixing it will
also allow removing the concept of the "preverify" step (WTF???) and
allow the verifier to cleanly flag functions which fail verification in
a way that precludes even computing dominance information. Currently,
that results in a fatal error even when you ask the verifier to not
fatally error. It's awesome like that.
The yak shaving will continue...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199095 91177308-0d34-0410-b5e6-96231b3b80d8
style, and remove some unnecessary comments (the code is perfectly
self-documenting here). Also clang-format the function declarations as
they wrap cleanly now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199084 91177308-0d34-0410-b5e6-96231b3b80d8
directory. These passes are already defined in the IR library, and it
doesn't make any sense to have the headers in Analysis.
Long term, I think there is going to be a much better way to divide
these matters. The dominators code should be fully separated into the
abstract graph algorithm and have that put in Support where it becomes
obvious that evn Clang's CFGBlock's can use it. Then the verifier can
manually construct dominance information from the Support-driven
interface while the Analysis library can provide a pass which both
caches, reconstructs, and supports a nice update API.
But those are very long term, and so I don't want to leave the really
confusing structure until that day arrives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199082 91177308-0d34-0410-b5e6-96231b3b80d8
This moves the old pass creation functionality to its own header and
updates the callers of that routine. Then it adds a new PM supporting
bitcode writer to the header file, and wires that up in the opt tool.
A test is added that round-trips code into bitcode and back out using
the new pass manager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199078 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the legacy passes in terms of the new ones. It adds
basic testing using explicit runs of the passes. Next up will be wiring
the basic output mechanism of opt up when the new pass manager is
engaged unless bitcode writing is requested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199049 91177308-0d34-0410-b5e6-96231b3b80d8
through being editted, and I forgot to delete it before committing.
What's more awesome is that it compiles cleanly!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199048 91177308-0d34-0410-b5e6-96231b3b80d8
Nothing was using the ability of the pass to delete the raw_ostream it
printed to, and nothing was trying to pass it a pointer to the
raw_ostream. Also, the function variant had a different order of
arguments from all of the others which was just really confusing. Now
the interface accepts a reference, doesn't offer to delete it, and uses
a consistent order. The implementation of the printing passes haven't
been updated with this simplification, this is just the API switch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199044 91177308-0d34-0410-b5e6-96231b3b80d8
name to match the source file which I got earlier. Update the include
sites. Also modernize the comments in the header to use the more
recommended doxygen style.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199041 91177308-0d34-0410-b5e6-96231b3b80d8
mode that can be used to debug the execution of everything.
No support for analyses here, that will come later. This already helps
show parts of the opt commandline integration that isn't working. Tests
of that will start using it as the bugs are fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199004 91177308-0d34-0410-b5e6-96231b3b80d8
An upcoming loop vectorizer commit will want to replace a SCEVUnknown(Value*)
by a SCEVConstant. This commit modifies the SCEVParameterRewriter to support
this. The SCEVParameterRewriter constructor can optionally specify to follow
this behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198949 91177308-0d34-0410-b5e6-96231b3b80d8
operand into the Value interface just like the core print method is.
That gives a more conistent organization to the IR printing interfaces
-- they are all attached to the IR objects themselves. Also, update all
the users.
This removes the 'Writer.h' header which contained only a single function
declaration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198836 91177308-0d34-0410-b5e6-96231b3b80d8
Modern versions of OSX/Darwin's ld (ld64 > 97.17) have an optimisation present that allows the back end to omit relocations (and replace them with an absolute difference) for FDE some text section refs.
This patch allows a backend to opt-in to this behaviour by setting "DwarfFDESymbolsUseAbsDiff". At present, this is only enabled for modern x86 OSX ports.
test changes by David Fang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198744 91177308-0d34-0410-b5e6-96231b3b80d8
I believe the bot failures on linux systems were due to overestimating the
alignment of object-files within archives, which are only guaranteed to be
two-byte aligned. I have reduced the alignment in
RuntimeDyldELF::createObjectImageFromFile accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198737 91177308-0d34-0410-b5e6-96231b3b80d8
are part of the core IR library in order to support dumping and other
basic functionality.
Rename the 'Assembly' include directory to 'AsmParser' to match the
library name and the only functionality left their -- printing has been
in the core IR library for quite some time.
Update all of the #includes to match.
All of this started because I wanted to have the layering in good shape
before I started adding support for printing LLVM IR using the new pass
infrastructure, and commandline support for the new pass infrastructure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198688 91177308-0d34-0410-b5e6-96231b3b80d8
subsequent changes are easier to review. About to fix some layering
issues, and wanted to separate out the necessary churn.
Also comment and sink the include of "Windows.h" in three .inc files to
match the usage in Memory.inc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198685 91177308-0d34-0410-b5e6-96231b3b80d8
Parse tag names as well as expressions. The former is part of the
specification, the latter is for improved compatibility with the GNU assembler.
Fix attribute value handling to be comformant to the specification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198662 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce a new virtual method Note into the AsmParser. This completements the
existing Warning and Error methods. Use the new method to clean up the output
of the unwind routines in the ARM AsmParser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198661 91177308-0d34-0410-b5e6-96231b3b80d8
SymbolLookUp() call back to return a demangled C++ name to
be used as a comment.
For example darwin's otool(1) program the uses the llvm
disassembler now can produce disassembly like:
callq __ZNK4llvm6Target20createMCDisassemblerERKNS_15MCSubtargetInfoE ## llvm::Target::createMCDisassembler(llvm::MCSubtargetInfo const&) const
Also fix a bug in LLVMDisasmInstruction() that was not flushing
the raw_svector_ostream for the disassembled instruction string
before copying it to the output buffer that was causing truncation
of the output.
rdar://10173828
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198637 91177308-0d34-0410-b5e6-96231b3b80d8
Now with a fix for PR18384: ValueHandleBase::ValueIsDeleted.
We need to invalidate SCEV's loop info when we delete a block, even if no values are hoisted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198631 91177308-0d34-0410-b5e6-96231b3b80d8
This moves the check up into the parent class so that all targets can use it
without having to copy (and keep in sync) the same error message.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198579 91177308-0d34-0410-b5e6-96231b3b80d8
Move the ARM EHABI unwind opcode definitions from the ARM MCTargetDesc into LLVM
Support. This enables sharing of the definitions across the ARM target code as
well as llvm-readobj. This will allow implementation of the unwind decoding in
llvm-readobj.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198576 91177308-0d34-0410-b5e6-96231b3b80d8
Removed vzeroupper from AVX-512 mode - our optimization gude does not recommend to insert vzeroupper at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198557 91177308-0d34-0410-b5e6-96231b3b80d8
instructions. I needed this for a quick experiment I was making, and
while I've no idea if that will ever get committed, I didn't want to
throw away the pattern match code and for anyone else to have to write
it again. I've added unittests to make sure this works correctly.
In fun news, this also uncovered the IRBuilder bug. Doh!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198541 91177308-0d34-0410-b5e6-96231b3b80d8
failed to correctly propagate the NUW and NSW flags to the constant
folder for two instructions. I've added a unittest to cover flag
propagation for the rest of the instructions and constant expressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198538 91177308-0d34-0410-b5e6-96231b3b80d8
This commit was the source of crasher PR18384:
While deleting: label %for.cond127
An asserting value handle still pointed to this value!
UNREACHABLE executed at llvm/lib/IR/Value.cpp:671!
Reverting to get the builders green, feel free to re-land after fixing up.
(Renato has a handy isolated repro if you need it.)
This reverts commit r198478.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198503 91177308-0d34-0410-b5e6-96231b3b80d8
getSCEV for an ashr instruction creates an intermediate zext
expression when it truncates its operand.
The operand is initially inside the loop, so the narrow zext
expression has a non-loop-invariant loop disposition.
LoopSimplify then runs on an outer loop, hoists the ashr operand, and
properly invalidate the SCEVs that are mapped to value.
The SCEV expression for the ashr is now an AddRec with the hoisted
value as the now loop-invariant start value.
The LoopDisposition of this wide value was properly invalidated during
LoopSimplify.
However, if we later get the ashr SCEV again, we again try to create
the intermediate zext expression. We get the same SCEV that we did
earlier, and it is still cached because it was never mapped to a
Value. When we try to create a new AddRec we abort because we're using
the old non-loop-invariant LoopDisposition.
I don't have a solution for this other than to clear LoopDisposition
when LoopSimplify hoists things.
I think the long-term strategy should be to perform LoopSimplify on
all loops before computing SCEV and before running any loop opts on
individual loops. It's possible we may want to rerun LoopSimplify on
individual loops, but it should rarely do anything, so rarely require
invalidating SCEV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198478 91177308-0d34-0410-b5e6-96231b3b80d8
The motivation is to mark dump methods as used in debug builds so that they can
be called from lldb, but to not do so in release builds so that they can be
dead-stripped.
There's lots of potential follow-up work suggested in the thread
"Should dump methods be LLVM_ATTRIBUTE_USED only in debug builds?" on cfe-dev,
but everyone seems to agreen on this subset.
Macro name chosen by fair coin toss.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198456 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch any program that wanted to know the final symbol name of a
GlobalValue had to link with Target.
This patch implements a compromise solution where the mangler uses DataLayout.
This way, any tool that already links with Target (llc, clang) gets the exact
behavior as before and new IR files can be mangled without linking with Target.
With this patch the mangler is constructed with just a DataLayout and DataLayout
is extended to include the information the Mangler needs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198438 91177308-0d34-0410-b5e6-96231b3b80d8
Back out the part of r198399 that enabled LLVM_FINAL/LLVM_OVERRIDE on VS 2010.
DwarfUnit.h legitimately uses them on destructors which unfortunately triggers
Compiler Error C3665 (override specifier not allowed on a destructor/finalizer)
prior to MSVC 2012:
virtual ~DwarfCompileUnit() LLVM_OVERRIDE;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198401 91177308-0d34-0410-b5e6-96231b3b80d8
The 'sealed' definition of LLVM_FINAL can be dropped once VS 2010 is
decommissioned.
Some of this is speculative so will keep an eye on the waterfall -- ping me if
you see failures.
Incremental work towards C++11 migration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198399 91177308-0d34-0410-b5e6-96231b3b80d8
The greedy register allocator tries to split a live-range around each
instruction where it is used or defined to relax the constraints on the entire
live-range (this is a last chance split before falling back to spill).
The goal is to have a big live-range that is unconstrained (i.e., that can use
the largest legal register class) and several small local live-range that carry
the constraints implied by each instruction.
E.g.,
Let csti be the constraints on operation i.
V1=
op1 V1(cst1)
op2 V1(cst2)
V1 live-range is constrained on the intersection of cst1 and cst2.
tryInstructionSplit relaxes those constraints by aggressively splitting each
def/use point:
V1=
V2 = V1
V3 = V2
op1 V3(cst1)
V4 = V2
op2 V4(cst2)
Because of how the coalescer infrastructure works, each new variable (V3, V4)
that is alive at the same time as V1 (or its copy, here V2) interfere with V1.
Thus, we end up with an uncoalescable copy for each split point.
To make tryInstructionSplit less aggressive, we check if the split point
actually relaxes the constraints on the whole live-range. If it does not, we do
not insert it.
Indeed, it will not help the global allocation problem:
- V1 will have the same constraints.
- V1 will have the same interference + possibly the newly added split variable
VS.
- VS will produce an uncoalesceable copy if alive at the same time as V1.
<rdar://problem/15570057>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198369 91177308-0d34-0410-b5e6-96231b3b80d8
As noted in the comment above CodeGenPrepare::OptimizeInst, which aggressively
sinks compares to reduce pressure on the condition register(s), for targets
such as PowerPC with multiple condition registers, this may not be the right
thing to do. This adds an HasMultipleConditionRegisters boolean to TLI, and
CodeGenPrepare::OptimizeInst is skipped when HasMultipleConditionRegisters is
true.
This functionality will be used by the PowerPC backend in an upcoming commit.
Especially when the PowerPC backend starts tracking individual condition
register bits as separate allocatable entities (which will happen in this
upcoming commit), this sinking from CodeGenPrepare::OptimizeInst is
significantly suboptimial.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198354 91177308-0d34-0410-b5e6-96231b3b80d8
During the years there have been some attempts at figuring out how to
align byval arguments. A look at the commit log suggests that they
were
* Use the ABI alignment.
* When that was not sufficient for x86-64, I added the 's' specification to
DataLayout.
* When that was not sufficient Evan added the virtual getByValTypeAlignment.
* When even that was not sufficient, we just got the FE to add the alignment
to the byval.
This patch is just a simple cleanup that removes my first attempt at fixing the
problem. I also added an AArch64 implementation of getByValTypeAlignment to
make sure this patch is a nop. I also left the 's' parsing for backward
compatibility.
I will send a short email to llvmdev about the change for anyone maintaining
an out of tree target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198287 91177308-0d34-0410-b5e6-96231b3b80d8
lib/Support/ThreadLocal.cpp:53:15: error: typedef 'SIZE_TOO_BIG' locally defined but not used [-Werror=unused-local-typedefs]
typedef int SIZE_TOO_BIG[sizeof(pthread_key_t) <= sizeof(data) ? 1 : -1];
Done the C++11 way, switching on and using LLVM_STATIC_ASSERT() instead of LLVM_ATTRIBUTE_UNUSED.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198255 91177308-0d34-0410-b5e6-96231b3b80d8
The defined() preprocessor expansion wasn't working out on the lld builder.
Also update the documentation to cover another Visual Studio release versioning
convention.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198158 91177308-0d34-0410-b5e6-96231b3b80d8
Also prospectively enable static_assert as the documentation suggests it's been
available since MSVC 2010. Let's see if the build servers agree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198142 91177308-0d34-0410-b5e6-96231b3b80d8
Includes documentation mapping MSC version numbers to the more familiar Visual
Studio releases.
Cleanup only to simplify upcoming C++11 / MSVC 2013 changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198141 91177308-0d34-0410-b5e6-96231b3b80d8
Factor the MachineFunctionPass into MachineSchedulerBase.
Split the DAG class into ScheduleDAGMI and SchedulerDAGMILive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198119 91177308-0d34-0410-b5e6-96231b3b80d8
just calling into MAI and is only abstracting for a single interface that
we actually need to check in multiple places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198092 91177308-0d34-0410-b5e6-96231b3b80d8
ConstantSDNodes (or UNDEFs) into a simple BUILD_VECTOR.
For example, given the following sequence of dag nodes:
i32 C = Constant<1>
v4i32 V = BUILD_VECTOR C, C, C, C
v4i32 Result = SIGN_EXTEND_INREG V, ValueType:v4i1
The SIGN_EXTEND_INREG node can be folded into a build_vector since
the vector in input is a BUILD_VECTOR of constants.
The optimized sequence is:
i32 C = Constant<-1>
v4i32 Result = BUILD_VECTOR C, C, C, C
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198084 91177308-0d34-0410-b5e6-96231b3b80d8
It's no longer necessary to lazily add members to the DICompositeType
member list. Instead any lazy members (special member functions and
member template instantiations) are added to the parent late based on
their context link, the same way that nested types have always been
handled (never being in the member list - just added to the parent DIE
lazily based on context).
Clang's been updated not to use this function anymore as it improves
type unit consistency by never emitting lazy members in type units.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198079 91177308-0d34-0410-b5e6-96231b3b80d8
This is an iterator which you can build around a MemoryBuffer. It will
iterate through the non-empty, non-comment lines of the buffer as
a forward iterator. It should be small and reasonably fast (although it
could be made much faster if anyone cares, I don't really...).
This will be used to more simply support the text-based sample
profile file format, and is largely based on the original patch by
Diego. I've re-worked the style of it and separated it from the work of
producing a MemoryBuffer from a file which both simplifies the interface
and makes it easier to test.
The style of the API follows the C++ standard naming conventions to fit
in better with iterators in general, much like the Path and FileSystem
interfaces follow standard-based naming conventions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198068 91177308-0d34-0410-b5e6-96231b3b80d8
Split sadd.with.overflow into add + sadd.with.overflow to allow
analysis and optimization. This should ideally be done after
InstCombine, which can perform code motion (eventually indvars should
run after all canonical instcombines). We want ISEL to recombine the
add and the check, at least on x86.
This is currently under an option for reducing live induction
variables: -liv-reduce. The next step is reducing liveness of IVs that
are live out of the overflow check paths. Once the related
optimizations are fully developed, reviewed and tested, I do expect
this to become default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197926 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Before this change the instrumented code before Ret instructions looked like:
<Unpoison Frame Redzones>
if (Frame != OriginalFrame) // I.e. Frame is fake
<Poison Complete Frame>
Now the instrumented code looks like:
if (Frame != OriginalFrame) // I.e. Frame is fake
<Poison Complete Frame>
else
<Unpoison Frame Redzones>
Reviewers: eugenis
Reviewed By: eugenis
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2458
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197907 91177308-0d34-0410-b5e6-96231b3b80d8
This is needed to guard an upcoming feature in clang until the C++11 transition
is complete, at which point it can be removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197895 91177308-0d34-0410-b5e6-96231b3b80d8
where it's only bool-like 1/0 result like std::set.count().
Some of the LLVM ADT already return unsigned count(), while
others return bool count().
This patch modifies SmallPtrSet, SmallSet, SparseSet count()
to return unsigned instead of bool:
1 instead of true
0 instead of false
More ADT to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197879 91177308-0d34-0410-b5e6-96231b3b80d8
