MIPS64 ELF file has a very specific relocation record format. Each
record might specify up to three relocation operations. So the `r_info`
field in fact consists of three relocation type sub-fields and optional
code of "special" symbols.
http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf
page 40
The patch implements support of the MIPS64 relocation record format in
yaml2obj/obj2yaml tools by introducing new optional Relocation fields:
Type2, Type3, and SpecSym. These fields are recognized only if the
object/YAML file relates to the MIPS64 target.
Differential Revision: http://reviews.llvm.org/D7136
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227044 91177308-0d34-0410-b5e6-96231b3b80d8
The current 8 bits is sufficient for ELF32 targets but ELF64 requires
32 bits. Add a test for AArch64 that exposes the issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222898 91177308-0d34-0410-b5e6-96231b3b80d8
For historical reasons archives on mach-o have two possible names for the
file containing the table of contents for the archive: "__.SYMDEF SORTED"
and "__.SYMDEF". But the libObject archive reader only supported the former.
This patch fixes llvm::object::Archive to support both names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221747 91177308-0d34-0410-b5e6-96231b3b80d8
The ELF symbol `st_other` field might contain additional flags besides
visibility ones. This patch implements support for some MIPS specific
flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221491 91177308-0d34-0410-b5e6-96231b3b80d8
add the code and test cases for 32-bit ARM symbolizer.
Also fixed the printing of data in code as it was not using the table correctly
and needed to fix one of the test cases too.
This will break lld’s test/mach-o/arm-interworking-movw.yaml till the tweak
for that is made. Which I’ll be committing immediately after this commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221470 91177308-0d34-0410-b5e6-96231b3b80d8
Use the position of the subsequent symbol in the object file to infer
the size of it's predecessor. I hope to eventually remove whatever COFF
specific details from this little algorithm so that we can unify this
logic with what Mach-O does.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221444 91177308-0d34-0410-b5e6-96231b3b80d8
The MRI scripts have to work with CRLF, and in general it is probably
a good idea to support this in a core utility like LineIterator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221153 91177308-0d34-0410-b5e6-96231b3b80d8
Do a better job classifying symbols. This increases the consistency
between the COFF handling code and the ELF side of things.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220952 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This helps llvm-objdump -r to print out the symbol name along
with the relocation type on x86. Adjust existing tests from checking
for "Unknown" to check for the symbol now.
Test Plan: Adjusted test/Object tests.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5987
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220866 91177308-0d34-0410-b5e6-96231b3b80d8
This matches the behavior of GNU ar and also makes it easier to implemnt
support for the addlib command.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220336 91177308-0d34-0410-b5e6-96231b3b80d8
I was quiet surprised to find this feature being used. Fortunately the uses
I found look fairly simple. In fact, they are just a very verbose version
of the regular ar commands.
Start implementing it then by parsing the script and setting the command
variables as if we had a regular command line.
This patch adds just enough support to create an empty archive and do a bit
of error checking. In followup patches I will implement at least addmod
and addlib.
From the description in the manual, even the more general case should not
be too hard to implement if needed. The features that don't map 1:1 to
the simple command line are
* Reading from multiple archives.
* Creating multiple archives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219521 91177308-0d34-0410-b5e6-96231b3b80d8
Long section names are represented as a slash followed by a numeric
ASCII string. This number is an offset into a string table.
Print the appropriate entry in the string table instead of the less
enlightening /4.
N.B. yaml2obj already does the right thing, this test exercises both
sides of the (de-)serialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219458 91177308-0d34-0410-b5e6-96231b3b80d8
The code is buggy and barely tested. It is also mostly boilerplate.
(This includes MCObjectDisassembler, which is the interface to that
functionality)
Following an IRC discussion with Jim Grosbach, it seems sensible to just
nuke the whole lot of functionality, and dig it up from VCS if
necessary (I hope not!).
All of this stuff appears to have been added in a huge patch dump (look
at the timeframe surrounding e.g. r182628) where almost every patch
seemed to be untested and not reviewed before being committed.
Post-review responses to the patches were never addressed. I don't think
any of it would have passed pre-commit review.
I doubt anyone is depending on this, since this code appears to be
extremely buggy. In limited testing that Michael Spencer and I did, we
couldn't find a single real-world object file that wouldn't crash the
CFG reconstruction stuff. The symbolizer stuff has O(n^2) behavior and
so is not much use to anyone anyway. It seemed simpler to remove them as
a whole. Most of this code is boilerplate, which is the only way it was
able to scrape by 60% coverage.
HEADSUP: Modules folks, some files I nuked were referenced from
include/llvm/module.modulemap; I just deleted the references. Hopefully
that is the right fix (one was a FIXME though!).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216983 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch we had
@a = weak global ...
but
@b = alias weak ...
The patch changes aliases to look more like global variables.
Looking at some really old code suggests that the reason was that the old
bison based parser had a reduction for alias linkages and another one for
global variable linkages. Putting the alias first avoided the reduce/reduce
conflict.
The days of the old .ll parser are long gone. The new one parses just "linkage"
and a later check is responsible for deciding if a linkage is valid in a
given context.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214355 91177308-0d34-0410-b5e6-96231b3b80d8
The -print-file-name option in llvm-nm is to precede each symbol
with the object file it came from. While code for the parsing of this
option and its aliases existed there was no code to implement it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213906 91177308-0d34-0410-b5e6-96231b3b80d8
the specified section. This is same functionality as darwin’s nm(1) "-s" flag.
There is one FIXME in the code and I’m all ears to anyone that can help me
with that. This option takes exactly two strings and should be allowed
anywhere on the command line. Such that "llvm-nm -s __TEXT __text foo.o"
would work. But that does not as the CommandLine Library does not have a
way to make this work as far as I can tell. For now the "-s __TEXT __text"
has to be last on the command line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212842 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow the "-s" flag to implemented in the future as it
is in darwin’s nm(1) to list symbols only in the specified section.
Given a LGTM by Shankar Easwaran who originally implemented
the support for lvm-nm’s -print-armap and archive map symbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212576 91177308-0d34-0410-b5e6-96231b3b80d8
It is not clear if llvm.global_ctors should or should not be in llvm.metadata,
but in practice it is not and we need to ignore it for LTO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212351 91177308-0d34-0410-b5e6-96231b3b80d8
symbol’s name. On darwin the -j flag is used (often in combinations
with other flags) to produce a complete list of symbol names which
than can then be reorder and used with ld(1)’s -order_file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212294 91177308-0d34-0410-b5e6-96231b3b80d8