The inline asm operand constraint is initially encoded in the virtual
register for the operand, but that register class may change during
coalescing, and the original constraint is lost.
Encode the original register class as part of the flag word for each
inline asm operand. This makes it possible to recover the actual
constraint required by inline asm, just like we can for normal
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141833 91177308-0d34-0410-b5e6-96231b3b80d8
for cpp pre-processed assembly we give correct filename and line numbers when
reporting errors in assembly files when using clang and -integrated-as on .s
files. rdar://8998895
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141814 91177308-0d34-0410-b5e6-96231b3b80d8
file. Since it should only be used when necessary propagate it through
the backend code generation and tweak testcases accordingly.
This helps with code like in clang's test/CodeGen/debug-info-line.c where
we have multiple #line directives within a single lexical block and want
to generate only a single block that contains each file change.
Part of rdar://10246360
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141729 91177308-0d34-0410-b5e6-96231b3b80d8
unused) code from .cmake to DataTypes.h.in so that the files are essentially in
sync module differences in autoconf/cmake replacement syntax.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141702 91177308-0d34-0410-b5e6-96231b3b80d8
IVs.
Indvars previously chose randomly between congruent IVs. Now it will
bias the decision toward IVs that SCEVExpander likes to create. This
was not done to fix any problem, it's just a welcome side effect of
factoring code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141633 91177308-0d34-0410-b5e6-96231b3b80d8
This line, and those below, will be ignored--
M include/llvm/Linker.h
M tools/bugpoint/Miscompilation.cpp
M tools/bugpoint/BugDriver.cpp
M tools/llvm-link/llvm-link.cpp
M lib/Linker/LinkModules.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141606 91177308-0d34-0410-b5e6-96231b3b80d8
promoting allocas to preferred alignments that exceed the natural
alignment. This avoids some potentially expensive dynamic stack realignments.
The natural stack alignment is set in target data strings via the "S<size>"
option. Size is in bits and must be a multiple of 8. The natural stack alignment
defaults to "unspecified" (represented by a zero value), and the "unspecified"
value does not prevent any alignment promotions. Target maintainers that care
about avoiding promotions should explicitly add the "S<size>" option to their
target data strings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141599 91177308-0d34-0410-b5e6-96231b3b80d8
flags as binutils objdump but the output is different, not just in format but
also showing different sections. Compare its results against readelf, not
objdump.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141579 91177308-0d34-0410-b5e6-96231b3b80d8
For me, this is a nice convenience. We generally want grep to match
stats output only when the event has occurred.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141574 91177308-0d34-0410-b5e6-96231b3b80d8
The difference between isPseudo and isCodeGenOnly is a bit murky, but
isCodeGenOnly should eventually go away. It is used for instructions
that are clones of real instructions with slightly different properties.
The standard pseudo-instructions never mirror real instructions, so they
are definitely in the isPseudo category.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141567 91177308-0d34-0410-b5e6-96231b3b80d8
--- Reverse-merging r141377 into '.':
U tools/llvm-objdump/MachODump.cpp
--- Reverse-merging r141376 into '.':
U include/llvm/Object/COFF.h
U include/llvm/Object/ObjectFile.h
U include/llvm-c/Object.h
U tools/llvm-objdump/llvm-objdump.cpp
U lib/Object/MachOObjectFile.cpp
U lib/Object/COFFObjectFile.cpp
U lib/Object/Object.cpp
U lib/Object/ELFObjectFile.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141379 91177308-0d34-0410-b5e6-96231b3b80d8
Multidefs are a bit unwieldy and incomplete. Remove them in favor of
another mechanism, probably for loops.
Revert "Make Test More Thorough"
Revert "Fix a typo."
Revert "Vim Support for Multidefs"
Revert "Emacs Support for Multidefs"
Revert "Document Multidefs"
Revert "Add a Multidef Test"
Revert "Update Test for Multidefs"
Revert "Process Multidefs"
Revert "Parser Multidef Support"
Revert "Lexer Support for Multidefs"
Revert "Add Multidef Data Structures"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141378 91177308-0d34-0410-b5e6-96231b3b80d8
They are not in sync now, for example Bitcast would show up as LLVMCall.
So instead introduce 2 functions that map to and from the opcodes in the C
bindings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141290 91177308-0d34-0410-b5e6-96231b3b80d8
This restores my karma after I added TRI::getSubClassWithSubReg().
Register constraints are applied 'backwards'. Starting from the
register class required by an instruction operand, the correct question
is: 'How can I constrain the super-register register class so all its
sub-registers satisfy the instruction constraint?' The
getMatchingSuperRegClass() hook answers that.
We never need to go 'forwards': Starting from a super-register register
class, what register class are the sub-registers in? The
getSubRegisterRegClass() hook did that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141258 91177308-0d34-0410-b5e6-96231b3b80d8
Add a set of data structures and members analogous to those used for
multiclass defs. These will represent a new kind of multiclass def: a
multidef. The idea behind the multidef is to process a list of items
and create a def record for each one inside the enclosing multiclass.
This allows the user to dynamically create a set of defs based on the
contents of a list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141230 91177308-0d34-0410-b5e6-96231b3b80d8
to the landing pad. This will be used by the back-end to generate the jump
tables for dispatching the arriving longjmp in sjlj eh.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141224 91177308-0d34-0410-b5e6-96231b3b80d8
This function is used to constrain a register class to a sub-class that
supports the given sub-register index.
For example, getSubClassWithSubReg(GR32, sub_8bit) -> GR32_ABCD.
The function will be used to compute register classes when emitting
INSERT_SUBREG and EXTRACT_SUBREG nodes and for register class inflation
of sub-register operations.
The version provided by TableGen is usually adequate, but targets can
override.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141142 91177308-0d34-0410-b5e6-96231b3b80d8
using llvm's public 'C' disassembler API now including annotations.
Hooked this up to Darwin's otool(1) so it can again print things like branch
targets for example this:
blx _puts
instead of this:
blx #-36
and includes support for annotations for branches to symbol stubs like:
bl 0x40 @ symbol stub for: _puts
and annotations for pc relative loads like this:
ldr r3, #8 @ literal pool for: Hello, world!
Also again can print the expression encoded in the Mach-O relocation entries for
things like this:
movt r0, :upper16:((_foo-_bar)+1234)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141129 91177308-0d34-0410-b5e6-96231b3b80d8
The <undef> flag says that a MachineOperand doesn't read its register,
or doesn't depend on the previous value of its register.
A full register def never depends on the previous register value. A
partial register def may depend on the previous value if it is intended
to update part of a register.
For example:
%vreg10:dsub_0<def,undef> = COPY %vreg1
%vreg10:dsub_1<def> = COPY %vreg2
The first copy instruction defines the full %vreg10 register with the
bits not covered by dsub_0 defined as <undef>. It is not considered a
read of %vreg10.
The second copy modifies part of %vreg10 while preserving the rest. It
has an implicit read of %vreg10.
This patch adds a MachineOperand::readsReg() method to determine if an
operand reads its register.
Previously, this was modelled by adding a full-register <imp-def>
operand to the instruction. This approach makes it possible to
determine directly from a MachineOperand if it reads its register. No
scanning of MI operands is required.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141124 91177308-0d34-0410-b5e6-96231b3b80d8
