array member of a struct, it's possible to land in an arbitrary position
inside that struct, such that attempting to find further getelementptr
indices will fail. In such cases, folding cannot be done.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79485 91177308-0d34-0410-b5e6-96231b3b80d8
static extents of the static array type, it causes GlobalOpt and
other passes to be more conservative. This canonicalization also
allows the constant folder to add "inbounds" to GEPs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79440 91177308-0d34-0410-b5e6-96231b3b80d8
TargetData is not present. It still uses TargetData when available.
This generalization also fixed some limitations in the TargetData
case; the attached testcase covers this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79344 91177308-0d34-0410-b5e6-96231b3b80d8
unfoldable references to a PHI node in the block being folded, and disable
the transformation in that case. The correct transformation of such PHI
nodes depends on whether BB dominates Succ, and dominance is expensive
to compute here. (Alternatively, it's possible to check whether any
uses are live, but that's also essentially a dominance calculation.
Another alternative is to use reg2mem, but it probably isn't a good idea to
use that in simplifycfg.)
Also, remove some incorrect code from CanPropagatePredecessorsForPHIs
which is made unnecessary with this patch: it didn't consider the case
where a PHI node in BB has multiple uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79174 91177308-0d34-0410-b5e6-96231b3b80d8
the new load by the old load instead of by the extract element because
a store could have occurred between the load and extract element.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78891 91177308-0d34-0410-b5e6-96231b3b80d8
few places in InstCombine to use it, to fix problems handling pointer
types. This fixes the recent llvm-gcc bootstrap error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78005 91177308-0d34-0410-b5e6-96231b3b80d8
also apply to vectors. This allows us to compile this:
#include <emmintrin.h>
__m128i a(__m128 a, __m128 b) { return a==a & b==b; }
__m128i b(__m128 a, __m128 b) { return a!=a | b!=b; }
to:
_a:
cmpordps %xmm1, %xmm0
ret
_b:
cmpunordps %xmm1, %xmm0
ret
with clang instead of to a ton of horrible code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76863 91177308-0d34-0410-b5e6-96231b3b80d8
with negative tests: this test wasn't checking what it thought it was
because it was grepping .bc, not .ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76861 91177308-0d34-0410-b5e6-96231b3b80d8
Getelementptrs that are defined to wrap are virtually useless to
optimization, and getelementptrs that are undefined on any kind
of overflow are too restrictive -- it's difficult to ensure that
all intermediate addresses are within bounds. I'm going to take
a different approach.
Remove a few optimizations that depended on this flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76437 91177308-0d34-0410-b5e6-96231b3b80d8
insertelement/extractelement.
I'm not entirely sure this is precisely what we want to do: should we
prefer bitcast(insertelement) or insertelement(bitcast)? Similarly. should we
prefer extractelement(bitcast) or bitcast(extractelement)?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76345 91177308-0d34-0410-b5e6-96231b3b80d8
operands; it's possible to end up with a constant-foldable operand to
most instructions, even those which can't trap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75845 91177308-0d34-0410-b5e6-96231b3b80d8
the operands have pointer type, so that the resulting type matches
the original SCEV type, and so that unnecessary ptrtoints are
avoided in common cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75680 91177308-0d34-0410-b5e6-96231b3b80d8
(I think it's reasonably clear that we want to have a canonical form for
constructs like this; if anyone thinks that a select is not the best
canonical form, please tell me.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75531 91177308-0d34-0410-b5e6-96231b3b80d8
check for avoiding re-analyzing a widening cast needed to happen
earlier, as getSCEV itself may result in a isLoopGuardedByCond query.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75511 91177308-0d34-0410-b5e6-96231b3b80d8
so that all code paths get it. PR4256 was about a case where the
phi translation loop would find all preds in the Visited cache, so
it could get by without re-sorting the NonLocalPointerDeps cache.
Fix this by resorting it earlier, there is no reason not to do this.
This patch inspired by Jakub Staszak's patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75476 91177308-0d34-0410-b5e6-96231b3b80d8
of loops. Add several new functions to for working with ScalarEvolution's
add-hoc value-range analysis functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75252 91177308-0d34-0410-b5e6-96231b3b80d8
we could do this, doing so requires adjusting the demanded mask and the code isn't
doing that yet. This fixes PR4495
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74699 91177308-0d34-0410-b5e6-96231b3b80d8
an individual exhaustive evaluation reflects only the exit value
implied by an individual exit, which may differ from the actual
exit value of the loop if there are other exits. This fixes PR4477.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74447 91177308-0d34-0410-b5e6-96231b3b80d8
when one of them can be converted to a trivial icmp and conditional
branch.
This addresses what is essentially a phase ordering problem.
SimplifyCFG knows how to do this transformation, but it doesn't do so
if the primary block has any instructions in it other than an icmp and
a branch. In the given testcase, the block contains other instructions,
however they are loop-invariant and can be hoisted. SimplifyCFG doesn't
have LoopInfo though, so it can't hoist them. And, it's important that
the blocks be merged before LoopRotation, as it doesn't support
multiple-exit loops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74396 91177308-0d34-0410-b5e6-96231b3b80d8
inserted to replace that value must dominate all of of the basic
blocks associated with the uses of the value in the PHI, not just
one of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74376 91177308-0d34-0410-b5e6-96231b3b80d8
computations in loops with multiple exits.
Adjust the testcase for PR4436 so that the relevant portion isn't
optimized away.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74073 91177308-0d34-0410-b5e6-96231b3b80d8
terminator, instead of after the last phi. This fixes a bug
exposed by ScalarEvolution analyzing more kinds of loops.
This fixes PR4436.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74072 91177308-0d34-0410-b5e6-96231b3b80d8
SCEVUnknowns with identical Instructions to be equal. This allows
it to analze cases such as the attached testcase, where the front-end
has cloned the loop controlling expression. Along with r73805, this
lets IndVarSimplify eliminate all the sign-extend casts in the
loop in the attached testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73807 91177308-0d34-0410-b5e6-96231b3b80d8
expression in IVUsers, because in the case of a use of a non-linear
addrec outside of a loop, this causes the addrec to be evaluated as
a linear addrec.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73774 91177308-0d34-0410-b5e6-96231b3b80d8
as if they were multiple uses of the same instruction. This interacts
well with the existing loadpre that j-t does to open up many new jump
threads earlier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73768 91177308-0d34-0410-b5e6-96231b3b80d8
casted induction variables in cases where the cast
isn't foldable. It ended up being a pessimization in
many cases. This could be fixed, but it would require
a bunch of complicated code in IVUsers' clients. The
advantages of this approach aren't visible enough to
justify it at this time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73706 91177308-0d34-0410-b5e6-96231b3b80d8
move loads back past a check that the load address
is valid, see new testcase. The test that went
in with 72661 has exactly this case, except that
the conditional it's moving past is checking
something else; I've settled for changing that
test to reference a global, not a pointer. It
may be possible to scan all the tests you pass and
make sure none of them are checking any component
of the address, but it's not trivial and I'm not
trying to do that here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73632 91177308-0d34-0410-b5e6-96231b3b80d8
obscuring what would otherwise be a low-bits mask. Use ComputeMaskedBits
to compute what ShrinkDemandedConstant knew about to reconstruct a
low-bits mask value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73540 91177308-0d34-0410-b5e6-96231b3b80d8
failures.
To support this, add some utility functions to Type to help support
vector/scalar-independent code. Change ConstantInt::get and
ConstantFP::get to support vector types, and add an overload to
ConstantInt::get that uses a static IntegerType type, for
convenience.
Introduce a new getConstant method for ScalarEvolution, to simplify
common use cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73431 91177308-0d34-0410-b5e6-96231b3b80d8
problem addressed in 31284, but the patch there only
addressed the case where an invoke is the first thing in
a block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73416 91177308-0d34-0410-b5e6-96231b3b80d8
they contain multiplications of constants with add operations.
This helps simplify several kinds of things; in particular it
helps simplify expressions like ((-1 * (%a + %b)) + %a) to %b,
as expressions like this often come up in loop trip count
computations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73361 91177308-0d34-0410-b5e6-96231b3b80d8
induction variable when the addrec to be expanded does not require
a wider type. This eliminates the need for IndVarSimplify to
micro-manage SCEV expansions, because SCEVExpander now
automatically expands them in the form that IndVarSimplify considers
to be canonical. (LSR still micro-manages its SCEV expansions,
because it's optimizing for the target, rather than for
other optimizations.)
Also, this uses the new getAnyExtendExpr, which has more clever
expression simplification logic than the IndVarSimplify code it
replaces, and this cleans up some ugly expansions in code such as
the included masked-iv.ll testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73294 91177308-0d34-0410-b5e6-96231b3b80d8
either one call the other since either one can be replaced at link time, and
they need to be independent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73225 91177308-0d34-0410-b5e6-96231b3b80d8
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
