Now that only the register-scavenger version of the CR spilling code remains,
we no longer need the Darwin R2 hack. Darwin can use R0 as a spare register in
any case where the System V ABI uses it (R0 is special architecturally, and so
is reserved under all common ABIs).
A few test cases needed to be updated to reflect the register-allocation changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176868 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176733 91177308-0d34-0410-b5e6-96231b3b80d8
There's no need to generate a stack frame for PPC32 SVR4 when there are
no local variables assigned to the stack, i.e., when no red zone is needed.
(PPC64 supports a red zone, but PPC32 does not.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176124 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC TLS relocation types were not previously added to the
necessary list in MCELFStreamer::fixSymbolsInTLSFixups(). Now they are!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176094 91177308-0d34-0410-b5e6-96231b3b80d8
Large code model is identical to medium code model except that the
addis/addi sequence for "local" accesses is never used. All accesses
use the addis/ld sequence.
The coding changes are straightforward; most of the patch is taken up
with creating variants of the medium model tests for large model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175767 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the PPCDAGToDAGISel::PostprocessISelDAG virtual
method to perform post-selection peephole optimizations on the DAG
representation.
One optimization is implemented here: folds to clean up complex
addressing expressions for thread-local storage and medium code
model. It will also be useful for large code model sequences when
those are added later. I originally thought about doing this on the
MI representation prior to register assignment, but it's difficult to
do effective global dead code elimination at that point. DCE is
trivial on the DAG representation.
A typical example of a candidate code sequence in assembly:
addis 3, 2, globalvar@toc@ha
addi 3, 3, globalvar@toc@l
lwz 5, 0(3)
When the final instruction is a load or store with an immediate offset
of zero, the offset from the add-immediate can replace the zero,
provided the relocation information is carried along:
addis 3, 2, globalvar@toc@ha
lwz 5, globalvar@toc@l(3)
Since the addi can in general have multiple uses, we need to only
delete the instruction when the last use is removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175697 91177308-0d34-0410-b5e6-96231b3b80d8
This handles the cases where the 6-bit splat element is odd, converting
to a three-instruction sequence to add or subtract two splats. With this
fix, the XFAIL in test/CodeGen/PowerPC/vec_constants.ll is removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175663 91177308-0d34-0410-b5e6-96231b3b80d8
The PPC backend doesn't handle these correctly. This patch uses logic
similar to that in the X86 and ARM backends to track these arguments
properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175635 91177308-0d34-0410-b5e6-96231b3b80d8
During lowering of a BUILD_VECTOR, we look for opportunities to use a
vector splat. When the splatted value fits in 5 signed bits, a single
splat does the job. When it doesn't fit in 5 bits but does fit in 6,
and is an even value, we can splat on half the value and add the result
to itself.
This last optimization hasn't been working recently because of improved
constant folding. To circumvent this, create a pseudo VADD_SPLAT that
can be expanded during instruction selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175632 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, even when a pre-increment load or store was generated,
we often needed to keep a copy of the original base register for use
with other offsets. If all of these offsets are constants (including
the offset which was combined into the addressing mode), then this is
clearly unnecessary. This change adjusts these other offsets to use the
new incremented address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174746 91177308-0d34-0410-b5e6-96231b3b80d8
I didn't see those because the test case used "not grep". FileCheck the test and
XFAIL it, preserving the old optimization, so this can be fixed eventually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174330 91177308-0d34-0410-b5e6-96231b3b80d8
This required disabling a PowerPC optimization that did the following:
input:
x = BUILD_VECTOR <i32 16, i32 16, i32 16, i32 16>
lowered to:
tmp = BUILD_VECTOR <i32 8, i32 8, i32 8, i32 8>
x = ADD tmp, tmp
The add now gets folded immediately and we're back at the BUILD_VECTOR we
started from. I don't see a way to fix this currently so I left it disabled
for now.
Fix some trivially foldable X86 tests too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174325 91177308-0d34-0410-b5e6-96231b3b80d8
The main lists of debug info metadata attached to the compile_unit had an extra
layer of metadata nodes they went through for no apparent reason. This patch
removes that (& still passes just as much of the GDB 7.5 test suite). If anyone
can show evidence as to why these extra metadata nodes are there I'm open to
reverting this patch & documenting why they're there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174266 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first commit of a large series which will add support for the
QPX vector instruction set to the PowerPC backend. This instruction set is
used on the IBM Blue Gene/Q supercomputers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173973 91177308-0d34-0410-b5e6-96231b3b80d8
The common code in the post-RA scheduler to break anti-dependencies on the
critical path contained a flaw. In the reported case, an anti-dependency
between the overlapping registers %X4 and %R4 exists:
%X29<def> = OR8 %X4, %X4
%R4<def>, %X3<def,dead,tied3> = LBZU 1, %X3<kill,tied1>
The unpatched code breaks the dependency by replacing %R4 and its uses
with %R3, the first register on the available list. However, %R3 and
%X3 overlap, so this creates two overlapping definitions on the same
instruction.
The fix is straightforward, preventing selection of a register that
overlaps any other defined register on the same instruction.
The test case is reduced from the bug report, and verifies that we no
longer produce "lbzu 3, 1(3)" when breaking this anti-dependency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173706 91177308-0d34-0410-b5e6-96231b3b80d8
_Complex float and _Complex long double, by simply increasing the
number of floating point registers available for return values.
The test case verifies that the correct registers are loaded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172733 91177308-0d34-0410-b5e6-96231b3b80d8
The included test case is derived from one of the GCC compatibility tests.
The problem arises after the selection DAG has been converted to type-legalized
form. The combiner first sees a 64-bit load that can be converted into a
pre-increment form. The original load feeds into a SRL that isolates the
upper 32 bits of the loaded doubleword. This looks like an opportunity for
DAGCombiner::ReduceLoadWidth() to replace the 64-bit load with a 32-bit load.
However, this transformation is not valid, as the replacement load is not
a pre-increment load. The pre-increment load produces an extra result,
which feeds a subsequent add instruction. The replacement load only has
one result value, and this value is propagated to all uses of the pre-
increment load, including the add. Because the add is looking for the
second result value as its operand, it ends up attempting to add a constant
to a token chain, resulting in a crash.
So the patch simply disables this transformation for any load with more than
two result values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172480 91177308-0d34-0410-b5e6-96231b3b80d8
This was an experimental option, but needs to be defined
per-target. e.g. PPC A2 needs to aggressively hide latency.
I converted some in-order scheduling tests to A2. Hal is working on
more test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171946 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids FileCheck failing over different comment characters in
assembly (notably powerpc64 on Linux vs Darwin) and should fix David's
build-bot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171886 91177308-0d34-0410-b5e6-96231b3b80d8
code generation. Variables addressed through a GlobalAlias were not being
handled, and variables with available_externally linkage were treated
incorrectly. The patch contains two new tests to verify the correct code
generation for these cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171778 91177308-0d34-0410-b5e6-96231b3b80d8
As with the prefetch intrinsic to which it maps, simply have dcbt
marked as reading from and writing to its arguments instead of having
unmodeled side effects. While this might cause unwanted code motion
(because aliasing checks don't really capture cache-line sharing),
it is more important that prefetches in unrolled loops don't block
the scheduler from rearranging the unrolled loop body.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171073 91177308-0d34-0410-b5e6-96231b3b80d8
Use of store or load with the atomic specifier on 64-bit types would
cause instruction-selection failures. As with the 32-bit case, these
can use the default expansion in terms of cmp-and-swap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171072 91177308-0d34-0410-b5e6-96231b3b80d8
There's probably a better expansion for those nodes than the default for
altivec, but this is better than crashing. VSELECTs occur in loop vectorizer
output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170551 91177308-0d34-0410-b5e6-96231b3b80d8
A register can be associated with several distinct register classes.
For example, on PPC, the floating point registers are each associated with
both F4RC (which holds f32) and F8RC (which holds f64). As a result, this code
would fail when provided with a floating point register and an f64 operand
because it would happen to find the register in the F4RC class first and
return that. From the F4RC class, SDAG would extract f32 as the register
type and then assert because of the invalid implied conversion between
the f64 value and the f32 register.
Instead, search all register classes. If a register class containing the
the requested register has the requested type, then return that register
class. Otherwise, as before, return the first register class found that
contains the requested register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170436 91177308-0d34-0410-b5e6-96231b3b80d8
for TLS dynamic models on 64-bit PowerPC ELF. The default sort routine
for relocations only sorts on the r_offset field; but with TLS, there
can be two relocations with the same r_offset. For PowerPC, this patch
sorts secondarily on descending r_type, which matches the behavior
expected by the linker.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170237 91177308-0d34-0410-b5e6-96231b3b80d8
for a wider range of GOT entries that can hold thread-relative offsets.
This matches the behavior of GCC, which was not documented in the PPC64 TLS
ABI. The ABI will be updated with the new code sequence.
Former sequence:
ld 9,x@got@tprel(2)
add 9,9,x@tls
New sequence:
addis 9,2,x@got@tprel@ha
ld 9,x@got@tprel@l(9)
add 9,9,x@tls
Note that a linker optimization exists to transform the new sequence into
the shorter sequence when appropriate, by replacing the addis with a nop
and modifying the base register and relocation type of the ld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170209 91177308-0d34-0410-b5e6-96231b3b80d8
predictable when compiled on at least one non-PowerPC host. Source of
nondeterminism not apparent. Restrict the test to build on PowerPC hosts
for now while looking into the issue further.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170016 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC target. This is the last of the four models, so we now have
full TLS support.
This is mostly a straightforward extension of the general dynamic model.
I had to use an additional Chain operand to tie ADDIS_DTPREL_HA to the
register copy following ADDI_TLSLD_L; otherwise everything above the
ADDIS_DTPREL_HA appeared dead and was removed.
As before, there are new test cases to test the assembly generation, and
the relocations output during integrated assembly. The expected code
gen sequence can be read in test/CodeGen/PowerPC/tls-ld.ll.
There are a couple of things I think can be done more efficiently in the
overall TLS code, so there will likely be a clean-up patch forthcoming;
but for now I want to be sure the functionality is in place.
Bill
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170003 91177308-0d34-0410-b5e6-96231b3b80d8
Given a thread-local symbol x with global-dynamic access, the generated
code to obtain x's address is:
Instruction Relocation Symbol
addis ra,r2,x@got@tlsgd@ha R_PPC64_GOT_TLSGD16_HA x
addi r3,ra,x@got@tlsgd@l R_PPC64_GOT_TLSGD16_L x
bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
R_PPC64_REL24 __tls_get_addr
nop
<use address in r3>
The implementation borrows from the medium code model work for introducing
special forms of ADDIS and ADDI into the DAG representation. This is made
slightly more complicated by having to introduce a call to the external
function __tls_get_addr. Using the full call machinery is overkill and,
more importantly, makes it difficult to add a special relocation. So I've
introduced another opcode GET_TLS_ADDR to represent the function call, and
surrounded it with register copies to set up the parameter and return value.
Most of the code is pretty straightforward. I ran into one peculiarity
when I introduced a new PPC opcode BL8_NOP_ELF_TLSGD, which is just like
BL8_NOP_ELF except that it takes another parameter to represent the symbol
("x" above) that requires a relocation on the call. Something in the
TblGen machinery causes BL8_NOP_ELF and BL8_NOP_ELF_TLSGD to be treated
identically during the emit phase, so this second operand was never
visited to generate relocations. This is the reason for the slightly
messy workaround in PPCMCCodeEmitter.cpp:getDirectBrEncoding().
Two new tests are included to demonstrate correct external assembly and
correct generation of relocations using the integrated assembler.
Comments welcome!
Thanks,
Bill
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169910 91177308-0d34-0410-b5e6-96231b3b80d8
misched used GetUnderlyingObject in order to break false load/store
dependencies, and the -enable-aa-sched-mi feature similarly relied on
GetUnderlyingObject in order to ensure it is safe to use the aliasing analysis.
Unfortunately, GetUnderlyingObject does not recurse through phi nodes, and so
(especially due to LSR) all of these mechanisms failed for
induction-variable-dependent loads and stores inside loops.
This change replaces uses of GetUnderlyingObject with GetUnderlyingObjects
(which will recurse through phi and select instructions) in misched.
Andy reviewed, tested and simplified this patch; Thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169744 91177308-0d34-0410-b5e6-96231b3b80d8
on 64-bit PowerPC ELF.
The patch includes code to handle external assembly and MC output with the
integrated assembler. It intentionally does not support the "old" JIT.
For the initial-exec TLS model, the ABI requires the following to calculate
the address of external thread-local variable x:
Code sequence Relocation Symbol
ld 9,x@got@tprel(2) R_PPC64_GOT_TPREL16_DS x
add 9,9,x@tls R_PPC64_TLS x
The register 9 is arbitrary here. The linker will replace x@got@tprel
with the offset relative to the thread pointer to the generated GOT
entry for symbol x. It will replace x@tls with the thread-pointer
register (13).
The two test cases verify correct assembly output and relocation output
as just described.
PowerPC-specific selection node variants are added for the two
instructions above: LD_GOT_TPREL and ADD_TLS. These are inserted
when an initial-exec global variable is encountered by
PPCTargetLowering::LowerGlobalTLSAddress(), and later lowered to
machine instructions LDgotTPREL and ADD8TLS. LDgotTPREL is a pseudo
that uses the same LDrs support added for medium code model's LDtocL,
with a different relocation type.
The rest of the processing is straightforward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169281 91177308-0d34-0410-b5e6-96231b3b80d8
instruction (vmaddfp) to conform with IEEE to ensure the sign of a zero
result when resulting product is -0.0.
The -0.0 vector addend to vmaddfp is generated by a creating a vector
with full bits sets and then shifting each elements by 31-bits to the
left, resulting in a vector of 0x80000000 (or -0.0 as float).
The 'buildvec_canonicalize.ll' was adjusted to reflect this change and
the 'vec_mul.ll' was complemented with the float vector multiplication
test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168998 91177308-0d34-0410-b5e6-96231b3b80d8
