If solveBlockValue() needs results from predecessors that are not already
computed, it returns false with the intention of resuming when the dependencies
have been resolved. However, the computation would never be resumed since an
'overdefined' result had been placed in the cache, preventing any further
computation.
The point of placing the 'overdefined' result in the cache seems to have been
to break cycles, but we can check for that when inserting work items in the
BlockValue stack instead. This makes the "stop and resume" mechanism of
solveBlockValue() work as intended, unlocking more analysis.
Using this patch shaves 120 KB off a 64-bit Chromium build on Linux.
I benchmarked compiling bzip2.c at -O2 but couldn't measure any difference in
compile time.
Tests by Jiangning Liu from r215343 / PR21238, Pete Cooper, and me.
Differential Revision: http://reviews.llvm.org/D6397
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222768 91177308-0d34-0410-b5e6-96231b3b80d8
On LP64 platforms, it will work or not depending on the choosen memory
layout, so neither PASS nor XFAIL is appropiate.
As UNSUPPORTED as per-test target doesn't exist (yet), remove the test
instead to unbreak the builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222767 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the order in which different types are passed to get, but
one order is not inherently better than the other.
The main motivation is that this simplifies linkDefinedTypeBodies now that
it is only linking "real" opaque types. It is also means that we only have to
call it once and that we don't need getImpl.
A small change in behavior is that we don't copy type names when resolving
opaque types. This is an improvement IMHO, but it can be added back if
desired. A test is included with the new behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222764 91177308-0d34-0410-b5e6-96231b3b80d8
Mark destination buffer in zlib::compress and zlib::decompress as fully
initialized.
When building LLVM with system zlib and MemorySanitizer instrumentation,
MSan does not observe memory writes in zlib code and erroneously considers
zlib output buffers as uninitialized, resulting in false use-of-uninitialized
memory reports. This change helps MSan understand the state of that memory
and prevents such reports.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222763 91177308-0d34-0410-b5e6-96231b3b80d8
and PIC:
Allow FDE references outside the +/-2GB range supported by PC relative
offsets for code models other than small/medium. For JIT application,
memory layout is less controlled and can result in truncations
otherwise.
Patch from Akos Kiss.
Differential Revision: http://reviews.llvm.org/D6079
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222760 91177308-0d34-0410-b5e6-96231b3b80d8
Exactly the same checks are present in areTypesIsomorphic.
This might have been a premature performance optimization. I cannot reproduce
any slowdown with this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222758 91177308-0d34-0410-b5e6-96231b3b80d8
stored rather than the pointer type.
This change is analogous to r220138 which changed the canonicalization
for loads. The rationale is the same: memory does not have a type,
operations (and thus the values they produce) have a type. We should
match that type as closely as possible rather than reading some form of
semantics into the pointer type.
With this change, loads and stores should no longer be made with
nonsensical types for the values that tehy load and store. This is
particularly important when trying to match specific loaded and stored
types in the process of doing other instcombines, which is what led me
down this twisty maze of miscanonicalization.
I've put quite some effort into looking through IR to find places where
LLVM's optimizer was being unreasonably conservative in the face of
mismatched load and store types, however it is possible (let's say,
likely!) I have missed some. If you see regressions here, or from
r220138, the likely cause is some part of LLVM failing to cope with load
and store types differing. Test cases appreciated, it is important that
we root all of these out of LLVM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222748 91177308-0d34-0410-b5e6-96231b3b80d8
Fix ARMAttributeParser::CPU_arch_profile so that it doesn't switch on the value
'0' as a legal value of this build attribute.
Change-Id: Ie05a08900a82bb10b78c841b437df747ce3bb38e
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222743 91177308-0d34-0410-b5e6-96231b3b80d8
clearly only exactly equal width ptrtoint and inttoptr casts are no-op
casts, it says so right there in the langref. Make the code agree.
Original log from r220277:
Teach the load analysis to allow finding available values which require
inttoptr or ptrtoint cast provided there is datalayout available.
Eventually, the datalayout can just be required but in practice it will
always be there today.
To go with the ability to expose available values requiring a ptrtoint
or inttoptr cast, helpers are added to perform one of these three casts.
These smarts are necessary to finish canonicalizing loads and stores to
the operational type requirements without regressing fundamental
combines.
I've added some test cases. These should actually improve as the load
combining and store combining improves, but they may fundamentally be
highlighting some missing combines for select in addition to exercising
the specific added logic to load analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222739 91177308-0d34-0410-b5e6-96231b3b80d8
Only the super register flat_scr was marked as reserved,
so in some cases with high register usage it would still
try to allocate the subregisters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222737 91177308-0d34-0410-b5e6-96231b3b80d8
If we find out that two types are *not* isomorphic, we learn nothing about
opaque sub types in both the source and destination.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222727 91177308-0d34-0410-b5e6-96231b3b80d8
The pattern matching failed to recognize all instances of "-1", because when
comparing against "-1" we didn't use an APInt of the same bitwidth.
This commit fixes this and also adds inverse versions of the conditon to catch
more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222722 91177308-0d34-0410-b5e6-96231b3b80d8
This handles cases where we are comparing a masked value against itself.
The analysis could be further improved by making it recursive but such
expense is not currently justified.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222716 91177308-0d34-0410-b5e6-96231b3b80d8
The attn instruction is not part of the Power ISA, but is documented in the A2
user manual, and is accepted by the GNU assembler for the A2 and the POWER4+.
Reported as part of PR21650.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222712 91177308-0d34-0410-b5e6-96231b3b80d8
This does not matter on newer cores (where we can use reciprocal estimates in
fast-math mode anyway), but for older cores this allows us to generate better
fast-math code where we have multiple FDIVs with a common divisor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222710 91177308-0d34-0410-b5e6-96231b3b80d8
We were matching against the assume intrinsic in every check. Since we know that it must be an assume, this is just wasted work. Somewhat surprisingly, matching an intrinsic id is actually relatively expensive. It devolves to a string construction and comparison in Function::isIntrinsic.
I originally spotted this because it showed up in a performance profile of my compiler. I've since discovered a separate issue which seems to be the actual root cause, but this is minor perf goodness regardless.
I'm likely to follow up with another change to factor out the comparison matching. There's no need to match the compare instruction in every single one of the tests.
Differential Revision: http://reviews.llvm.org/D6312
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222709 91177308-0d34-0410-b5e6-96231b3b80d8
This change implements the comment and style changes Sean requested during post commit review with r221742. Sorry for the delay.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222707 91177308-0d34-0410-b5e6-96231b3b80d8
Clarify the wording around !invariant.load to properly reflect the semantics of such loads with respect to control dependence and location lifetime. To the best of my knowledge, the revised wording respects the actual implementation and understanding of issues involved highlighted in the recent 'Optimization hints for "constant" loads' thread on LLVMDev.
In particular, I'm aiming for the following results:
- To clarify that an invariant.load can fault and must respect control dependence. In particular, it is not sound to unconditionally pull an invariant load out of a loop if that loop would potentially never execute.
- To clarify that the invariant nature of a given pointer does not preclude the modification of that location through a pointer which is unrelated to the load operand. In particular, initializing a location and then passing a pointer through an opaque intrinsic which produces a new unrelated pointer, should behave as expected provided that the intrinsic is memory dependent on the initializing store.
- To clarify that storing a value to an invariant location is defined. It can not, for example, be considered unreachable. The value stored can be assumed to be equal to the value of any previous (or following!) invariant load, but the store itself is defined.
I recommend that anyone interested in using !invariant.load, or optimizing for them, read over the discussion in the review thread. A number of motivating examples are discussed.
Differential Revision: http://reviews.llvm.org/D6346
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222700 91177308-0d34-0410-b5e6-96231b3b80d8
When processing an assignment in the integrated assembler that sets
a symbol to the value of another symbol, we need to copy the st_other
bits that encode the local entry point offset.
Modeled after MipsTargetELFStreamer::emitAssignment handling of the
ELF::STO_MIPS_MICROMIPS flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222672 91177308-0d34-0410-b5e6-96231b3b80d8
