DAGCombine may choose to rewrite graphs where two loads feed a select into
graphs where a select of two addresses feed a load. While it sanity checks the
loads to make sure they are broadly equivalent it currently just uses the
alignment restriction of the left node. In cases where the right node has
stronger alignment requiresment this may lead to bad codegen, such as generating
an aligned load where an unaligned load is required. This patch makes the
combine generate a load with an alignment that is the same as whichever is more
restrictive of the two alignments.
Tests included.
rdar://17762530
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214322 91177308-0d34-0410-b5e6-96231b3b80d8
When predicting use-list order, we visit functions in reverse order
followed by `GlobalValue`s and write out use-lists at the first
opportunity. In the reader, this will translate to *after* the last use
has been added.
For this to work, we actually need to descend into `GlobalValue`s.
Added a targeted test in `use-list-order.ll` and `RUN` lines to the
newly passing tests in `test/Bitcode`.
There are two remaining failures in `test/Bitcode`:
- blockaddress.ll: I haven't thought through how to model the way
block addresses change the order of use-lists (or how to work around
it).
- metadata-2.ll: There's an old-style `@llvm.used` global array here
that I suspect the .ll parser isn't upgrading properly. When it
round-trips through bitcode, the .bc reader *does* upgrade it, so
the extra variable (`i8* null`) has an extra use, and the shuffle
vector doesn't match.
I think the fix is to upgrade old-style global arrays (or reject
them?) in the .ll parser.
This is part of PR5680.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214321 91177308-0d34-0410-b5e6-96231b3b80d8
Turns out `parseBitcodeFile()` does *not* take ownership of the buffer.
This was already clear in the header docs, but I obviously didn't read
them (having noticed that it gets stored in a `unique_ptr<>`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214313 91177308-0d34-0410-b5e6-96231b3b80d8
According to VectorType::isValidElementType, any integer, floating point
or pointer type is a valid vector element type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214302 91177308-0d34-0410-b5e6-96231b3b80d8
the jump instruction table pass. First, the verifier is already built
into all the tools. The test case is adapted to just run llvm-as
demonstrating that we still catch the broken module. Second, the
verifier is *extremely* slow. This was responsible for very significant
compile time regressions.
If you have deployed a Clang binary anywhere from r210280 to this
commit, you really want to re-deploy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214287 91177308-0d34-0410-b5e6-96231b3b80d8
We now (1) correctly decode the branch immediate, (2) modify the immediate to
corretly treat it as PC-rel, and (3) properly populate the stub entry.
Previously we had been doing each of these wrong.
<rdar://problem/17750739>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214285 91177308-0d34-0410-b5e6-96231b3b80d8
neverHasSideEffects is deprecated, and hasSideEffects = 0 is already
set on the base classes of the basic ALU instruction classes. The
base classes also already set mayLoad = 0 and mayStore = 0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214283 91177308-0d34-0410-b5e6-96231b3b80d8
This commit fixes undefined behaviour that caused the revert in r214249.
The problem was two unsequenced operations on a `DenseMap<>`, giving
different behaviour in GCC and Clang. This:
DenseMap<T*, unsigned> DM;
for (auto &X : ...)
DM[&X] = DM.size() + 1;
should have been:
DenseMap<T*, unsigned> DM;
for (auto &X : ...) {
unsigned Size = DM.size();
DM[&X] = Size + 1;
}
Until r214242, this difference between compilers didn't matter. In
r214242, `OrderMap::LastGlobalValueID` was introduced and compared
against IDs, which in GCC were off-by-one my expectations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214270 91177308-0d34-0410-b5e6-96231b3b80d8
We can treat ds_read2_* as a single offset if the offsets are adjacent.
No test since emission of read2 instructions for partially
aligned loads isn't implemented yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214269 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the move assignment added in r214213, since it wasn't necessary
to fix the bots (r214224 was the magic touch).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214260 91177308-0d34-0410-b5e6-96231b3b80d8
use in -verify mode.
This patch adds three hidden command line options to llvm-rtdyld:
-target-addr-start <start-addr> : Specify the start of the virtual address
space on the phony target.
-target-addr-end <end-addr> : Specify the end of the virtual address space
on the phony target.
-target-section-sep <sep> : Specify the separation (in bytes) between the
end of one section and the start of the next.
These options automatically default to sane values for the target platform. In
particular, they allow narrow (e.g. 32-bit, 16-bit) targets to be tested from
wider (e.g. 64-bit, 32-bit) hosts without overflowing pointers.
The section separation option defaults to zero, but can be set to a large number
(e.g. 1 << 32) to force large separations between sections in order to
stress-test large-code-model code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214255 91177308-0d34-0410-b5e6-96231b3b80d8
r214242 was subtle enough it really deserves a targeted test with
comments. This adds some global variables that trigger the relevant
code path. Sorry this wasn't committed with the fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214243 91177308-0d34-0410-b5e6-96231b3b80d8
To avoid unnecessary forward references, the reader doesn't process
initializers of `GlobalValue`s until after the constant pool has been
processed, and then in reverse order. Model this when predicting
use-list order. This gets two more Bitcode tests passing with
`llvm-uselistorder`.
Part of PR5680.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214242 91177308-0d34-0410-b5e6-96231b3b80d8
This moves some tests around to make it clearer what's being tested,
and adds very rudimentary comment syntax to the text input format to
make specifying this kind of test a little bit simpler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214235 91177308-0d34-0410-b5e6-96231b3b80d8
This patch reduces the complexity of the two inner loops in order to speed up
the loading of coverage data for very large functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214228 91177308-0d34-0410-b5e6-96231b3b80d8
MSVC [1] thinks `UseListShuffleVector` needs a copy constructor, but I
don't. Let's see if being explicit about `UseListOrder` is convincing.
[1]: http://lab.llvm.org:8011/builders/lld-x86_64-win7/builds/11664/steps/build_Lld/logs/stdio
Here's the failure:
C:/lld-x86_64_win7/lld-x86_64-win7/llvm.src/include\llvm/IR/UseListOrder.h(92): error C2248: 'llvm::UseListShuffleVector::operator =' : cannot access private member declared in class 'llvm::UseListShuffleVector' (C:\lld-x86_64_win7\lld-x86_64-win7\llvm.src\lib\Bitcode\Writer\ValueEnumerator.cpp) [C:\lld-x86_64_win7\lld-x86_64-win7\llvm.obj\lib\Bitcode\Writer\LLVMBitWriter.vcxproj]
C:/lld-x86_64_win7/lld-x86_64-win7/llvm.src/include\llvm/IR/UseListOrder.h(56) : see declaration of 'llvm::UseListShuffleVector::operator ='
C:/lld-x86_64_win7/lld-x86_64-win7/llvm.src/include\llvm/IR/UseListOrder.h(32) : see declaration of 'llvm::UseListShuffleVector'
This diagnostic occurred in the compiler generated function 'llvm::UseListOrder &llvm::UseListOrder::operator =(const llvm::UseListOrder &)'
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214224 91177308-0d34-0410-b5e6-96231b3b80d8
