I could fold the callers into their one call site, but the indirection
(given how verbose choosing the section is) seemed helpful.
The use of a member function pointer's a bit "tricky", but seems limited
enough, the call sites are simple/clean/clear, and there's only one use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203619 91177308-0d34-0410-b5e6-96231b3b80d8
First: refactor out the emission of entries into the .debug_loc section
into its own routine.
Second: add a new class ByteStreamer that can be used to either emit
using an AsmPrinter or hash using DIEHash the series of bytes that
would be emitted. Use this in all of the location emission routines
for the .debug_loc section.
No functional change intended outside of a few additional comments
in verbose assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203304 91177308-0d34-0410-b5e6-96231b3b80d8
For incoming improvements to inlined functions and lexical blocks
suggested by Adrian Prantl in review of r203187.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203263 91177308-0d34-0410-b5e6-96231b3b80d8
This works by moving the existing code into the DIEValue hierarchy
and using the DwarfDebug pointer off of the AsmPrinter to access
any global information we need.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203033 91177308-0d34-0410-b5e6-96231b3b80d8
This enables us to figure out where in the debug_loc section our
locations are so that we can eventually hash them. It also helps
remove some special case code in emission. No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203018 91177308-0d34-0410-b5e6-96231b3b80d8
already lived there and it is where it belongs -- this is the in-memory
debug location representation.
This is just cleanup -- Modules can actually cope with this, but that
doesn't make it right. After chatting with folks that have out-of-tree
stuff, going ahead and moving the rest of the headers seems preferable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202960 91177308-0d34-0410-b5e6-96231b3b80d8
alongside DIEBlock and replace uses accordingly. Use DW_FORM_exprloc
in DWARF4 and later code. Update testcases.
Adding a DIELoc instead of using extra forms inside DIEBlock so
that we can keep location expressions separate from other uses. No
direct use at the moment, however, it's not a lot of code and
using a separately named class keeps it somewhat more obvious
what's going on in various locations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201481 91177308-0d34-0410-b5e6-96231b3b80d8
This broke in r185459 while TLS support was being generalized to handle
non-symbol TLS representations.
I thought about/tried having an enum rather than a bool to track the
TLS-ness of the address table entry, but namespaces and naming seemed
more hassle than it was worth for only one caller that needed to specify
this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201469 91177308-0d34-0410-b5e6-96231b3b80d8
Type units need to insert their file strings into the compile unit's
line/file table. This is preliminary work to that end.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201196 91177308-0d34-0410-b5e6-96231b3b80d8
code to see if we're emitting a function into a non-default
text section. This is still a less-than-ideal solution, but more
contained than r199871 to determine whether or not we're emitting
code into an array of comdat sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200269 91177308-0d34-0410-b5e6-96231b3b80d8
compile unit. Make these relocations on the platforms that need
relocations and add a routine to ensure that we don't put the
addresses in an offset table for split dwarf.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199990 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r198865 which reverts r198851.
ASan identified a use-of-uninitialized of the DwarfTypeUnit::Ty variable
in skeleton type units.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198908 91177308-0d34-0410-b5e6-96231b3b80d8
Since we'll now also need the split dwarf file name along with the
language in DwarfTypeUnits, just use the whole DICompileUnit rather than
explicitly handling each field needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198842 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r198398, thus reapplying r198397.
I had accidentally introduced an endianness issue when applying the hash
to the type unit. Using support::ulittle64_t in the reinterpret_cast in
addDwarfTypeUnitType fixes this issue.
Original commit message:
Debug Info: Type Units: Simplify type hashing using IR-provided unique
names.
What's good for LTO metadata size problems ought to be good for non-LTO
debug info size too, so let's rely on the same uniqueness in both cases.
If it's insufficient for non-LTO for whatever reason (since we now won't
be uniquing CU-local types or any C types - but these are likely to not
be the most significant contributors to type bloat) we should consider a
frontend solution that'll help both LTO and non-LTO alike, rather than
using DWARF-level DIE-hashing that only helps non-LTO debug info size.
It's also much simpler this way and benefits C++ even more since we can
deduplicate lexically separate definitions of the same C++ type since
they have the same mangled name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198436 91177308-0d34-0410-b5e6-96231b3b80d8
Reverting due to bot failure I won't have time to investigate until
tomorrow.
This reverts commit r198397.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198398 91177308-0d34-0410-b5e6-96231b3b80d8
What's good for LTO metadata size problems ought to be good for non-LTO
debug info size too, so let's rely on the same uniqueness in both cases.
If it's insufficient for non-LTO for whatever reason (since we now won't
be uniquing CU-local types or any C types - but these are likely to not
be the most significant contributors to type bloat) we should consider a
frontend solution that'll help both LTO and non-LTO alike, rather than
using DWARF-level DIE-hashing that only helps non-LTO debug info size.
It's also much simpler this way and benefits C++ even more since we can
deduplicate lexically separate definitions of the same C++ type since
they have the same mangled name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198397 91177308-0d34-0410-b5e6-96231b3b80d8
r198196: Use a pointer to keep track of the skeleton unit for each normal unit and construct it up front.
r198199: Reapply r198196 with a fix to zero initialize the skeleton pointer.
r198202: Fix aranges and split dwarf by ensuring that the symbol and relocation back to the compile unit from the aranges section is to the skeleton unit and not the one in the dwo.
with a fix to use integer 0 for DW_AT_low_pc since the relocation to the text section symbol was causing issues with COFF. Accordingly remove addLocalLabelAddress and machinery since we're not currently using it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198222 91177308-0d34-0410-b5e6-96231b3b80d8
r198196: Use a pointer to keep track of the skeleton unit for each normal unit and construct it up front.
r198199: Reapply r198196 with a fix to zero initialize the skeleton pointer.
r198202: Fix aranges and split dwarf by ensuring that the symbol and relocation back to the compile unit from the aranges section is to the skeleton unit and not the one in the dwo.
They could be reproducible with explicit target.
llvm/lib/MC/WinCOFFObjectWriter.cpp:224: bool {anonymous}::COFFSymbol::should_keep() const: Assertion `Section->Number != -1 && "Sections with relocations must be real!"' failed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198208 91177308-0d34-0410-b5e6-96231b3b80d8
back to the compile unit from the aranges section is to the skeleton
unit and not the one in the dwo.
Do this by adding a method to grab a forwarded on local sym and local
section by querying the skeleton if one exists and using that. Add
a few tests to verify the relocations are back to the correct section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198202 91177308-0d34-0410-b5e6-96231b3b80d8
This simplifies type unit and type unit reference creation as well as
setting the stage for inter-type hashing across type unit boundaries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197539 91177308-0d34-0410-b5e6-96231b3b80d8
This is a precursor to moving type units into the correct (debug_types)
section with comdat groups and full type unit headers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196615 91177308-0d34-0410-b5e6-96231b3b80d8
This simplifies reasoning about the code and enables simple navigation
from a skeleton to its full unit. (currently there are no type unit
skeletons, so the skeleton list doesn't have the same ID == index
property)
Eventually we should get rid of this ID and just store the labels we
need as the IDs are allowing this code to create difficult to
manage/understand associations (loops over non-skeletal units are
implicitly referencing their skeletal units during pub* emission, for
example). It may be necessary to have some kind of skeleton->full unit
association and a more direct pointer or similar device would be
preferable than an index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196600 91177308-0d34-0410-b5e6-96231b3b80d8
DIEs already contain references directly to their DIEAbbrev, use that
instead of looking it up based on index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196446 91177308-0d34-0410-b5e6-96231b3b80d8
and emitted per function and CU. Begins coalescing ranges as a first
class entity through debug info. No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196178 91177308-0d34-0410-b5e6-96231b3b80d8
