Truncate the operands of a switch instruction to a narrower type if the upper
bits are known to be all ones or zeros.
rdar://problem/17720004
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219832 91177308-0d34-0410-b5e6-96231b3b80d8
The SLP vectorizer should not vectorize ephemeral values. These are used to
express information to the optimizer, and vectorizing them does not lead to
faster code (because the ephemeral values are dropped prior to code generation,
vectorized or not), and obscures the information the instructions are
attempting to communicate (the logic that interprets the arguments to
@llvm.assume generically does not understand vectorized conditions).
Also, uses by ephemeral values are free (because they, and the necessary
extractelement instructions, will be dropped prior to code generation).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219816 91177308-0d34-0410-b5e6-96231b3b80d8
A few minor changes to prevent @llvm.assume from interfering with loop
vectorization. First, treat @llvm.assume like the lifetime intrinsics, which
are scalarized (but don't otherwise interfere with the legality checking).
Second, ignore the cost of ephemeral instructions in the loop (these will go
away anyway during CodeGen).
Alignment assumptions and other uses of @llvm.assume can often end up inside of
loops that should be vectorized (this is not uncommon for assumptions generated
by __attribute__((align_value(n))), for example).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219741 91177308-0d34-0410-b5e6-96231b3b80d8
Eliminate library calls and intrinsic calls to fabs when the input
is a squared value.
Note that no unsafe-math / fast-math assumptions are needed for
this optimization.
Differential Revision: http://reviews.llvm.org/D5777
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219717 91177308-0d34-0410-b5e6-96231b3b80d8
We assumed that A must be greater than B because the right hand side of
a remainder operator must be nonzero.
However, it is possible for A to be less than B if Pow2 is a power of
two greater than 1.
Take for example:
i32 %A = 0
i32 %B = 31
i32 Pow2 = 2147483648
((Pow2 << 0) >>u 31) is non-zero but A is less than B.
This fixes PR21274.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219713 91177308-0d34-0410-b5e6-96231b3b80d8
This is the same optimization of r219233 with modifications to support PHIs with multiple incoming edges from the same block
and a test to check that this condition is handled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219656 91177308-0d34-0410-b5e6-96231b3b80d8
the IR going into it and to clean up the IR produced by the vectorizers.
Note that these are *off by default* right now while folks collect data
on whether the performance tradeoff is reasonable.
In a build of the 'opt' binary, I see about 2% compile time regression
due to this change on average. This is in my mind essentially the worst
expected case: very little of the opt binary is going to *benefit* from
these extra passes.
I've seen several benchmarks improve in performance my small amounts due
to running these passes, and there are certain (rare) cases where these
passes make a huge difference by either enabling the vectorizer at all
or by hoisting runtime checks out of the outer loop. My primary
motivation is to prevent people from seeing runtime check overhead in
benchmarks where the existing passes and optimizers would be able to
eliminate that.
I've chosen the sequence of passes based on the kinds of things that
seem likely to be relevant for the code at each stage: rotaing loops for
the vectorizer, finding correlated values, loop invariants, and
unswitching opportunities from any runtime checks, and cleaning up
commonalities exposed by the SLP vectorizer.
I'll be pinging existing threads where some of these issues have come up
and will start new threads to get folks to benchmark and collect data on
whether this is the right tradeoff or we should do something else.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219644 91177308-0d34-0410-b5e6-96231b3b80d8
We assumed that negation operations of the form (0 - %Z) resulted in a
negative number. This isn't true if %Z was originally negative.
Substituting the negative number into the remainder operation may result
in undefined behavior because the dividend might be INT_MIN.
This fixes PR21256.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219639 91177308-0d34-0410-b5e6-96231b3b80d8
We have a transform that changes:
(x lshr C1) udiv C2
into:
x udiv (C2 << C1)
However, it is unsafe to do so if C2 << C1 discards any of C2's bits.
This fixes PR21255.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219634 91177308-0d34-0410-b5e6-96231b3b80d8
A helper routine, MultiplyOverflows, was a less efficient
reimplementation of APInt's smul_ov and umul_ov. While we are here,
clean up the code so it's more uniform.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219583 91177308-0d34-0410-b5e6-96231b3b80d8
Consider the case where X is 2. (2 <<s 31)/s-2147483648 is zero but we
would fold to X. Note that this is valid when we are in the unsigned
domain because we require NUW: 2 <<u 31 results in poison.
This fixes PR21245.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219568 91177308-0d34-0410-b5e6-96231b3b80d8
consider:
C1 = INT_MIN
C2 = -1
C1 * C2 overflows without a doubt but consider the following:
%x = i32 INT_MIN
This means that (%X /s C1) is 1 and (%X /s C1) /s C2 is -1.
N. B. Move the unsigned version of this transform to InstSimplify, it
doesn't create any new instructions.
This fixes PR21243.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219567 91177308-0d34-0410-b5e6-96231b3b80d8
consider:
mul i32 nsw %x, -2147483648
this instruction will not result in poison if %x is 1
however, if we transform this into:
shl i32 nsw %x, 31
then we will be generating poison because we just shifted into the sign
bit.
This fixes PR21242.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219566 91177308-0d34-0410-b5e6-96231b3b80d8
getSmallConstantTripCount even when it isn't the exiting block.
I missed this in my first audit, very sorry. This was found in LNT and
elsewhere. I don't have a test case, but it was completely obvious from
inspection that this was the problem. I'll see if I can reduce a test
case, but I'm not really hopeful, and the value seems quite low.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219562 91177308-0d34-0410-b5e6-96231b3b80d8
routines and fix all of the bugs they expose.
I hit a test case that crashed even without these asserts due to passing
a non-exiting latch to the ExitingBlock parameter of the trip count
computation machinery. However, when I add the nice asserts, it turns
out we have plenty of coverage of these bugs, they just didn't manifest
in crashers.
The core problem seems to stem from an assumption that the latch *is*
the exiting block. While this is often true, and somewhat the "normal"
way to think about loops, it isn't necessarily true. The correct way to
call the trip count routines in a *generic* fashion (that is, without
a particular exit in mind) is to just use the loop's single exiting
block if it has one. The trip count can't be computed generically unless
it does. This works great for the loop vectorizer. The loop unroller
actually *wants* to select the latch when it has to chose between
multiple exits because for unrolling it is the latch trips that matter.
But if this is the desire, it needs to explicitly guard for non-exiting
latches and check for the generic trip count in that case.
I've added the asserts, and added convenience APIs for querying the trip
count generically that check for a single exit block. I've kept the APIs
consistent between computing trip count and trip multiples.
Thansk to Mark for the help debugging and tracking down the *right* fix
here!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219550 91177308-0d34-0410-b5e6-96231b3b80d8
instead
We used to transform this:
define void @test6(i1 %cond, i8* %ptr) {
entry:
br i1 %cond, label %bb1, label %bb2
bb1:
br label %bb2
bb2:
%ptr.2 = phi i8* [ %ptr, %entry ], [ null, %bb1 ]
store i8 2, i8* %ptr.2, align 8
ret void
}
into this:
define void @test6(i1 %cond, i8* %ptr) {
%ptr.2 = select i1 %cond, i8* null, i8* %ptr
store i8 2, i8* %ptr.2, align 8
ret void
}
because the simplifycfg transformation into selects would happen to happen
before the simplifycfg transformation that removes unreachable control flow
(We have 'unreachable control flow' due to the store to null which is undefined
behavior).
The existing transformation that removes unreachable control flow in simplifycfg
is:
/// If BB has an incoming value that will always trigger undefined behavior
/// (eg. null pointer dereference), remove the branch leading here.
static bool removeUndefIntroducingPredecessor(BasicBlock *BB)
Now we generate:
define void @test6(i1 %cond, i8* %ptr) {
store i8 2, i8* %ptr.2, align 8
ret void
}
I did not see any impact on the test-suite + externals.
rdar://18596215
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219462 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes a bug in method InstCombiner::FoldCmpCstShrCst where we
wrongly computed the distance between the highest bits set of two negative
values.
This fixes PR21222.
Differential Revision: http://reviews.llvm.org/D5700
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219406 91177308-0d34-0410-b5e6-96231b3b80d8
A function with discardable linkage cannot be discarded if its a member
of a COMDAT group without considering all the other COMDAT members as
well. This sort of thing is already handled by GlobalOpt/GlobalDCE.
This fixes PR21206.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219335 91177308-0d34-0410-b5e6-96231b3b80d8
A linkonce_odr member of a COMDAT shouldn't be dropped if we need to
keep the entire COMDAT group.
This fixes PR21191.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219283 91177308-0d34-0410-b5e6-96231b3b80d8
The icmp-select-icmp optimization targets select-icmp.eq
only. This is now ensured by testing the branch predicate
explictly. This commit also includes the test case for pr21199.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219282 91177308-0d34-0410-b5e6-96231b3b80d8
This is somewhat the inverse of how similar bugs in DAE and ArgPromo
manifested and were addressed. In those passes, individual call sites
were visited explicitly, and then the old function was deleted. This
left the debug info with a null llvm::Function* that needed to be
updated to point to the new function.
In the case of DFSan, it RAUWs the old function with the wrapper, which
includes debug info. So now the debug info refers to the wrapper, which
doesn't actually have any instructions with debug info in it, so it is
ignored entirely - resulting in a DW_TAG_subprogram with no high/low pc,
etc. Instead, fix up the debug info to refer to the original function
after the RAUW messed it up.
Reviewed/discussed with Peter Collingbourne on the llvm-dev mailing
list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219249 91177308-0d34-0410-b5e6-96231b3b80d8
`LoopUnrollPass` says that it preserves `LoopInfo` -- make it so. In
particular, tell `LoopInfo` about copies of inner loops when unrolling
the outer loop.
Conservatively, also tell `ScalarEvolution` to forget about the original
versions of these loops, since their inputs may have changed.
Fixes PR20987.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219241 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization tries to convert switch instructions that are used to select a value with only 2 unique cases + default block
to a select or a couple of selects (depending if the default block is reachable or not).
The typical case this optimization wants to be able to optimize is this one:
Example:
switch (a) {
case 10: %0 = icmp eq i32 %a, 10
return 10; %1 = select i1 %0, i32 10, i32 4
case 20: ----> %2 = icmp eq i32 %a, 20
return 2; %3 = select i1 %2, i32 2, i32 %1
default:
return 4;
}
It also sets the base for further optimizations that are planned and being reviewed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219223 91177308-0d34-0410-b5e6-96231b3b80d8
After some stellar (& inspired) help from Reid Kleckner providing a test
case for some rather unstable undefined behavior showing up as
assertions produced by r214761, I was able to fix this issue in DAE
involving the application of both varargs removal, followed by normal
argument removal.
Indeed I introduced this same bug into ArgumentPromotion (r212128) by
copying the code from DAE, and when I fixed the bug in ArgPromo
(r213805) and commented in that patch that I didn't need to address the
same issue in DAE because it was a single pass. Turns out it's two pass,
one for the varargs and one for the normal arguments, so the same fix is
needed (at least during varargs removal). So here it is.
(the observable/net effect of this bug, even when it didn't result in
assertion failure, is that debug info would describe the DAE'd function
in the abstract, but wouldn't provide high/low_pc, variable locations,
line table, etc (it would appear as though the function had been
entirely optimized away), see the original PR14016 for details of the
general problem)
I'm not recommitting the assertion just yet, as there's been another
regression of it since I last tried. It might just be a few test cases
weren't adequately updated after Adrian or Duncan's recent schema
changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219210 91177308-0d34-0410-b5e6-96231b3b80d8
If we require a single member of a comdat, require all of the other
members as well.
This fixes PR20981.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219191 91177308-0d34-0410-b5e6-96231b3b80d8
Takes care of the assert that caused build fails.
Rather than asserting the code checks now that the definition
and use are in the same block, and does not attempt
to optimize when that is not the case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219175 91177308-0d34-0410-b5e6-96231b3b80d8
Particularly, it addresses cases where Reassociate breaks Subtracts but then fails to optimize combinations like I1 + -I2 where I1 and I2 have the same rank and are identical.
Patch by Dmitri Shtilman.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219092 91177308-0d34-0410-b5e6-96231b3b80d8
Joerg suggested on IRC that I look at generalizing the logic from r219067 to
handle more general redundancies (like removing an assume(x > 3) dominated by
an assume(x > 5)). The way to do this would be to ask ValueTracking to
determine the value of the i1 argument. It turns out that ValueTracking is not
very good at this right now (although it does get the trivial redundancy case)
because it does not understand ICmps. Nevertheless, the resulting code in
InstCombine is simpler than r219067, so we might as well do it now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219070 91177308-0d34-0410-b5e6-96231b3b80d8
For any @llvm.assume intrinsic, if there is another which dominates it and uses
the same condition, then it is redundant and can be removed. While this does
not alter the semantics of the @llvm.assume intrinsics, it makes subsequent
handling more efficient (and the resulting IR easier to read).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219067 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root cause of the latter
was a tightened-up check in `DILexicalBlock::Verify()`, so I'll file a
PR to investigate who requires the loose check (and why).
Original commit message follows.
--
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219010 91177308-0d34-0410-b5e6-96231b3b80d8
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218914 91177308-0d34-0410-b5e6-96231b3b80d8
When unsafe-fp-math is enabled, we can turn sqrt(X) * sqrt(X) into X.
This can happen in the real world when calculating x ** 3/2. This occurs
in test-suite/SingleSource/Benchmarks/BenchmarkGame/n-body.c.
Differential Revision: http://reviews.llvm.org/D5584
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218906 91177308-0d34-0410-b5e6-96231b3b80d8
My commit rL216160 introduced a bug PR21014: IndVars widens code 'for (i = ; i < ...; i++) arr[ CONST - i]' into 'for (i = ; i < ...; i++) arr[ i - CONST]'
thus inverting index expression. This patch fixes it.
Thanks to Jörg Sonnenberger for pointing.
Differential Revision: http://reviews.llvm.org/D5576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218867 91177308-0d34-0410-b5e6-96231b3b80d8
`DIExpression`'s elements are 64-bit integers that are stored as
`ConstantInt`. The accessors already encapsulate the storage. This
commit updates the `DIBuilder` API to also encapsulate that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218797 91177308-0d34-0410-b5e6-96231b3b80d8
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
Note: I accidentally committed a bogus older version of this patch previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218787 91177308-0d34-0410-b5e6-96231b3b80d8
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218778 91177308-0d34-0410-b5e6-96231b3b80d8
The icmp-select-icmp optimization made the implicit assumption
that the select-icmp instructions are in the same block and asserted on it.
The fix explicitly checks for that condition and conservatively suppresses
the optimization when it is violated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218735 91177308-0d34-0410-b5e6-96231b3b80d8
In special cases select instructions can be eliminated by
replacing them with a cheaper bitwise operation even when the
select result is used outside its home block. The instances implemented
are patterns like
%x=icmp.eq
%y=select %x,%r, null
%z=icmp.eq|neq %y, null
br %z,true, false
==> %x=icmp.ne
%y=icmp.eq %r,null
%z=or %x,%y
br %z,true,false
The optimization is integrated into the instruction
combiner and performed only when all uses of the select result can
be replaced by the select operand proper. For this dominator information
is used and dominance is now a required analysis pass in the combiner.
The optimization itself is iterative. The critical step is to replace the
select result with the non-constant select operand. So the select becomes
local and the combiner iteratively works out simpler code pattern and
eventually eliminates the select.
rdar://17853760
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218721 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds a threshold that controls the number of bonus instructions
allowed for folding branches with common destination. The original code allows
at most one bonus instruction. With this patch, users can customize the
threshold to allow multiple bonus instructions. The default threshold is still
1, so that the code behaves the same as before when users do not specify this
threshold.
The motivation of this change is that tuning this threshold significantly (up
to 25%) improves the performance of some CUDA programs in our internal code
base. In general, branch instructions are very expensive for GPU programs.
Therefore, it is sometimes worth trading more arithmetic computation for a more
straightened control flow. Here's a reduced example:
__global__ void foo(int a, int b, int c, int d, int e, int n,
const int *input, int *output) {
int sum = 0;
for (int i = 0; i < n; ++i)
sum += (((i ^ a) > b) && (((i | c ) ^ d) > e)) ? 0 : input[i];
*output = sum;
}
The select statement in the loop body translates to two branch instructions "if
((i ^ a) > b)" and "if (((i | c) ^ d) > e)" which share a common destination.
With the default threshold, SimplifyCFG is unable to fold them, because
computing the condition of the second branch "(i | c) ^ d > e" requires two
bonus instructions. With the threshold increased, SimplifyCFG can fold the two
branches so that the loop body contains only one branch, making the code
conceptually look like:
sum += (((i ^ a) > b) & (((i | c ) ^ d) > e)) ? 0 : input[i];
Increasing the threshold significantly improves the performance of this
particular example. In the configuration where both conditions are guaranteed
to be true, increasing the threshold from 1 to 2 improves the performance by
18.24%. Even in the configuration where the first condition is false and the
second condition is true, which favors shortcuts, increasing the threshold from
1 to 2 still improves the performance by 4.35%.
We are still looking for a good threshold and maybe a better cost model than
just counting the number of bonus instructions. However, according to the above
numbers, we think it is at least worth adding a threshold to enable more
experiments and tuning. Let me know what you think. Thanks!
Test Plan: Added one test case to check the threshold is in effect
Reviewers: nadav, eliben, meheff, resistor, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, llvm-commits
Differential Revision: http://reviews.llvm.org/D5529
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218711 91177308-0d34-0410-b5e6-96231b3b80d8
Runtime unrolling will create a prologue to execute the extra
iterations which is can't divided by the unroll factor. It
generates an if-then-else sequence to jump into a factor -1
times unrolled loop body, like
extraiters = tripcount % loopfactor
if (extraiters == 0) jump Loop:
if (extraiters == loopfactor) jump L1
if (extraiters == loopfactor-1) jump L2
...
L1: LoopBody;
L2: LoopBody;
...
if tripcount < loopfactor jump End
Loop:
...
End:
It means if the unroll factor is 4, the loop body will be 7
times unrolled, 3 are in loop prologue, and 4 are in the loop.
This commit is to use a loop to execute the extra iterations
in prologue, like
extraiters = tripcount % loopfactor
if (extraiters == 0) jump Loop:
else jump Prol
Prol: LoopBody;
extraiters -= 1 // Omitted if unroll factor is 2.
if (extraiters != 0) jump Prol: // Omitted if unroll factor is 2.
if (tripcount < loopfactor) jump End
Loop:
...
End:
Then when unroll factor is 4, the loop body will be copied by
only 5 times, 1 in the prologue loop, 4 in the original loop.
And if the unroll factor is 2, new loop won't be created, just
as the original solution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218604 91177308-0d34-0410-b5e6-96231b3b80d8
The doFinalization method checks that the LoopToAliasSetMap is
empty. LICM populates that map as it runs through the loop nest,
deleting the entries for child loops as it goes. However, if a child
loop is deleted by another pass (e.g. unrolling) then the loop will
never be deleted from the map because LICM walks the loop nest to
find entries it can delete.
The fix is to delete the loop from the map and free the alias set
when the loop is deleted from the loop nest.
Differential Revision: http://reviews.llvm.org/D5305
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218387 91177308-0d34-0410-b5e6-96231b3b80d8
- BB duplication may not be desired on targets where there is no or small
branch penalty and code duplication needs restrict control.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218375 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than slurping in and splatting out the whole ctor list, preserve
the existing array entries without trying to understand them. Only
remove the entries that we know we can optimize away. This way we don't
need to wire through priority and comdats or anything else we might add.
Fixes a linker issue where the .init_array or .ctors entry would point
to discarded initialization code if the comdat group from the TU with
the faulty global_ctors entry was dropped.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218337 91177308-0d34-0410-b5e6-96231b3b80d8
shim between the TargetTransformInfo immutable pass and the Subtarget
via the TargetMachine and Function. Migrate a single call from
BasicTargetTransformInfo as an example and provide shims where TargetMachine
begins taking a Function to determine the subtarget.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218004 91177308-0d34-0410-b5e6-96231b3b80d8
This type isn't owned polymorphically (as demonstrated by making the
dtor protected and everything still compiling) so just address the
warning by protecting the base dtor and making the derived class final.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217990 91177308-0d34-0410-b5e6-96231b3b80d8
This improves other optimizations such as LSR. A sext may be added to the
compare's other operand, but this can often be hoisted outside of the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217953 91177308-0d34-0410-b5e6-96231b3b80d8
Example:
define i1 @foo(i32 %a) {
%shr = ashr i32 -9, %a
%cmp = icmp ne i32 %shr, -5
ret i1 %cmp
}
Before this fix, the instruction combiner wrongly thought that %shr
could have never been equal to -5. Therefore, %cmp was always folded to 'true'.
However, when %a is equal to 1, then %cmp evaluates to 'false'. Therefore,
in this example, it is not valid to fold %cmp to 'true'.
The problem was only affecting the case where the comparison was between
negative quantities where one of the quantities was obtained from arithmetic
shift of a negative constant.
This patch fixes the problem with the wrong folding (fixes PR20945).
With this patch, the 'icmp' from the example is now simplified to a
comparison between %a and 1. This still allows us to get rid of the arithmetic
shift (%shr).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217950 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: UsedByBranch is always true according to how BonusInst is defined.
Test Plan:
Passes check-all, and also verified
if (BonusInst && !UsedByBranch) {
...
}
is never entered during check-all.
Reviewers: resistor, nadav, jingyue
Reviewed By: jingyue
Subscribers: llvm-commits, eliben, meheff
Differential Revision: http://reviews.llvm.org/D5324
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217824 91177308-0d34-0410-b5e6-96231b3b80d8
We used to crash processing any relevant @llvm.assume on a 32-bit target
(because we'd ask SE to subtract expressions of differing types). I've copied
our 'simple.ll' test, but with the data layout from arm-linux-gnueabihf to get
some meaningful test coverage here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217574 91177308-0d34-0410-b5e6-96231b3b80d8
With this a DataLayoutPass can be reused for multiple modules.
Once we have doInitialization/doFinalization, it doesn't seem necessary to pass
a Module to the constructor.
Overall this change seems in line with the idea of making DataLayout a required
part of Module. With it the only way of having a DataLayout used is to add it
to the Module.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217548 91177308-0d34-0410-b5e6-96231b3b80d8
The routine that determines an alignment given some SCEV returns zero if the
answer is unknown. In a case where we could determine the increment of an
AddRec but not the starting alignment, we would compute the integer modulus by
zero (which is illegal and traps). Prevent this by returning early if either
the start or increment alignment is unknown (zero).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217544 91177308-0d34-0410-b5e6-96231b3b80d8
It's supposed to store additional pass information for current function here.
That was the reason for name change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217483 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch moves the profile reading logic out of the Sample Profile
transformation into a generic profile reader facility in
lib/ProfileData.
The intent is to use this new reader to implement a sample profile
reader/writer that can be used to convert sample profiles from external
sources into LLVM.
This first patch introduces no functional changes. It moves the profile
reading code from lib/Transforms/SampleProfile.cpp into
lib/ProfileData/SampleProfReader.cpp.
In subsequent patches I will:
- Add a bitcode format for sample profiles to allow for more efficient
encoding of the profile.
- Add a writer for both text and bitcode format profiles.
- Add a 'convert' command to llvm-profdata to be able to convert between
the two (and serve as entry point for other sample profile formats).
Reviewers: bogner, echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5250
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217437 91177308-0d34-0410-b5e6-96231b3b80d8
From a combination of @llvm.assume calls (and perhaps through other means, such
as range metadata), it is possible that all bits of a return value might be
known. Previously, InstCombine did not check for this (which is understandable
given assumptions of constant propagation), but means that we'd miss simple
cases where assumptions are involved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217346 91177308-0d34-0410-b5e6-96231b3b80d8
This change teaches LazyValueInfo to use the @llvm.assume intrinsic. Like with
the known-bits change (r217342), this requires feeding a "context" instruction
pointer through many functions. Aside from a little refactoring to reuse the
logic that turns predicates into constant ranges in LVI, the only new code is
that which can 'merge' the range from an assumption into that otherwise
computed. There is also a small addition to JumpThreading so that it can have
LVI use assumptions in the same block as the comparison feeding a conditional
branch.
With this patch, we can now simplify this as expected:
int foo(int a) {
__builtin_assume(a > 5);
if (a > 3) {
bar();
return 1;
}
return 0;
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217345 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a ScalarEvolution-powered transformation that updates load, store and
memory intrinsic pointer alignments based on invariant((a+q) & b == 0)
expressions. Many of the simple cases we can get with ValueTracking, but we
still need something like this for the more complicated cases (such as those
with an offset) that require some algebra. Note that gcc's
__builtin_assume_aligned's optional third argument provides exactly for this
kind of 'misalignment' offset for which this kind of logic is necessary.
The primary motivation is to fixup alignments for vector loads/stores after
vectorization (and unrolling). This pass is added to the optimization pipeline
just after the SLP vectorizer runs (which, admittedly, does not preserve SE,
although I imagine it could). Regardless, I actually don't think that the
preservation matters too much in this case: SE computes lazily, and this pass
won't issue any SE queries unless there are any assume intrinsics, so there
should be no real additional cost in the common case (SLP does preserve DT and
LoopInfo).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217344 91177308-0d34-0410-b5e6-96231b3b80d8
This builds on r217342, which added the infrastructure to compute known bits
using assumptions (@llvm.assume calls). That original commit added only a few
patterns (to catch common cases related to determining pointer alignment); this
change adds several other patterns for simple cases.
r217342 contained that, for assume(v & b = a), bits in the mask
that are known to be one, we can propagate known bits from the a to v. It also
had a known-bits transfer for assume(a = b). This patch adds:
assume(~(v & b) = a) : For those bits in the mask that are known to be one, we
can propagate inverted known bits from the a to v.
assume(v | b = a) : For those bits in b that are known to be zero, we can
propagate known bits from the a to v.
assume(~(v | b) = a): For those bits in b that are known to be zero, we can
propagate inverted known bits from the a to v.
assume(v ^ b = a) : For those bits in b that are known to be zero, we can
propagate known bits from the a to v. For those bits in
b that are known to be one, we can propagate inverted
known bits from the a to v.
assume(~(v ^ b) = a) : For those bits in b that are known to be zero, we can
propagate inverted known bits from the a to v. For those
bits in b that are known to be one, we can propagate
known bits from the a to v.
assume(v << c = a) : For those bits in a that are known, we can propagate them
to known bits in v shifted to the right by c.
assume(~(v << c) = a) : For those bits in a that are known, we can propagate
them inverted to known bits in v shifted to the right by c.
assume(v >> c = a) : For those bits in a that are known, we can propagate them
to known bits in v shifted to the right by c.
assume(~(v >> c) = a) : For those bits in a that are known, we can propagate
them inverted to known bits in v shifted to the right by c.
assume(v >=_s c) where c is non-negative: The sign bit of v is zero
assume(v >_s c) where c is at least -1: The sign bit of v is zero
assume(v <=_s c) where c is negative: The sign bit of v is one
assume(v <_s c) where c is non-positive: The sign bit of v is one
assume(v <=_u c): Transfer the known high zero bits
assume(v <_u c): Transfer the known high zero bits (if c is know to be a power
of 2, transfer one more)
A small addition to InstCombine was necessary for some of the test cases. The
problem is that when InstCombine was simplifying and, or, etc. it would fail to
check the 'do I know all of the bits' condition before checking less specific
conditions and would not fully constant-fold the result. I'm not sure how to
trigger this aside from using assumptions, so I've just included the change
here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217343 91177308-0d34-0410-b5e6-96231b3b80d8
This change, which allows @llvm.assume to be used from within computeKnownBits
(and other associated functions in ValueTracking), adds some (optional)
parameters to computeKnownBits and friends. These functions now (optionally)
take a "context" instruction pointer, an AssumptionTracker pointer, and also a
DomTree pointer, and most of the changes are just to pass this new information
when it is easily available from InstSimplify, InstCombine, etc.
As explained below, the significant conceptual change is that known properties
of a value might depend on the control-flow location of the use (because we
care that the @llvm.assume dominates the use because assumptions have
control-flow dependencies). This means that, when we ask if bits are known in a
value, we might get different answers for different uses.
The significant changes are all in ValueTracking. Two main changes: First, as
with the rest of the code, new parameters need to be passed around. To make
this easier, I grouped them into a structure, and I made internal static
versions of the relevant functions that take this structure as a parameter. The
new code does as you might expect, it looks for @llvm.assume calls that make
use of the value we're trying to learn something about (often indirectly),
attempts to pattern match that expression, and uses the result if successful.
By making use of the AssumptionTracker, the process of finding @llvm.assume
calls is not expensive.
Part of the structure being passed around inside ValueTracking is a set of
already-considered @llvm.assume calls. This is to prevent a query using, for
example, the assume(a == b), to recurse on itself. The context and DT params
are used to find applicable assumptions. An assumption needs to dominate the
context instruction, or come after it deterministically. In this latter case we
only handle the specific case where both the assumption and the context
instruction are in the same block, and we need to exclude assumptions from
being used to simplify their own ephemeral values (those which contribute only
to the assumption) because otherwise the assumption would prove its feeding
comparison trivial and would be removed.
This commit adds the plumbing and the logic for a simple masked-bit propagation
(just enough to write a regression test). Future commits add more patterns
(and, correspondingly, more regression tests).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217342 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a set of utility functions for collecting 'ephemeral' values. These
are LLVM IR values that are used only by @llvm.assume intrinsics (directly or
indirectly), and thus will be removed prior to code generation, implying that
they should be considered free for certain purposes (like inlining). The
inliner's cost analysis, and a few other passes, have been updated to account
for ephemeral values using the provided functionality.
This functionality is important for the usability of @llvm.assume, because it
limits the "non-local" side-effects of adding llvm.assume on inlining, loop
unrolling, etc. (these are hints, and do not generate code, so they should not
directly contribute to estimates of execution cost).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217335 91177308-0d34-0410-b5e6-96231b3b80d8
This adds an immutable pass, AssumptionTracker, which keeps a cache of
@llvm.assume call instructions within a module. It uses callback value handles
to keep stale functions and intrinsics out of the map, and it relies on any
code that creates new @llvm.assume calls to notify it of the new instructions.
The benefit is that code needing to find @llvm.assume intrinsics can do so
directly, without scanning the function, thus allowing the cost of @llvm.assume
handling to be negligible when none are present.
The current design is intended to be lightweight. We don't keep track of
anything until we need a list of assumptions in some function. The first time
this happens, we scan the function. After that, we add/remove @llvm.assume
calls from the cache in response to registration calls and ValueHandle
callbacks.
There are no new direct test cases for this pass, but because it calls it
validation function upon module finalization, we'll pick up detectable
inconsistencies from the other tests that touch @llvm.assume calls.
This pass will be used by follow-up commits that make use of @llvm.assume.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217334 91177308-0d34-0410-b5e6-96231b3b80d8
The special case did not work when run under -reassociate and can easily
be expressed by a further generalization of an existing pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217227 91177308-0d34-0410-b5e6-96231b3b80d8
LinearFunctionTestReplace tries to use the *next* indvar to compare
against when possible. However, it may be the case that the calculation
for the next indvar has NUW/NSW flags and that it may only be safely
used inside the loop. Using it in a comparison to calculate the exit
condition could result in observing poison.
This fixes PR20680.
Differential Revision: http://reviews.llvm.org/D5174
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217102 91177308-0d34-0410-b5e6-96231b3b80d8
The SLP vectorizer should propagate IR-level optimization hints/flags (nsw, nuw, exact, fast-math)
when converting scalar instructions into vectors. But this isn't a simple copy - we need to take
the intersection (the logical 'and') of the sets of flags on the scalars.
The solution is further complicated because we can have non-uniform (non-SIMD) vector ops after:
http://reviews.llvm.org/D4015http://llvm.org/viewvc/llvm-project?view=revision&revision=211339
The vast majority of changed files are existing tests that were not propagating IR flags, but I've
also added a new test file for focused testing of IR flag possibilities.
Differential Revision: http://reviews.llvm.org/D5172
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217051 91177308-0d34-0410-b5e6-96231b3b80d8
Adding 'IR' to the names in an attempt to be less ambiguous about the flags we're dealing with here.
The 'and' method is needed by the SLPVectorizer (PR20802) and possibly other passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217004 91177308-0d34-0410-b5e6-96231b3b80d8
Add -use-cfl-aa (and -use-cfl-aa-in-codegen) to add CFL AA in the default pass
managers (for easy testing).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216978 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
BBs might contain non-LCSSA'd values after the LCSSA pass is run if they
are unreachable from the entry block.
Normally, the users of the instruction would be PHIs but the unreachable
BBs have normal users; rewrite their uses to be undef values.
An alternative fix could involve fixing this at LCSSA but that would
require this invariant to hold after subsequent transforms. If a BB
created an unreachable block, they would be in violation of this.
This fixes PR19798.
Differential Revision: http://reviews.llvm.org/D5146
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216911 91177308-0d34-0410-b5e6-96231b3b80d8
SROA may decide that it needs to insert a bitcast and would set it's
insertion point before a PHI. This will create an invalid module
right quick.
Instead, choose the first insertion point in the basic block that holds
our PHI.
This fixes PR20822.
Differential Revision: http://reviews.llvm.org/D5141
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216891 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r216698 which reverted r216523 and r216598.
We would attempt to perform the transformation even if the match()
failed because, as a side effect, it would set V. This would trick us
into believing that we correctly found a place to correctly apply the
transform.
An additional test case was added to getelementptr.ll so that we might
not regress in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216890 91177308-0d34-0410-b5e6-96231b3b80d8
The loop vectorizer preserves wrapping, exact, and fast-math properties of scalar instructions.
This patch adds a convenience method to make that operation easier because we need to do this
in the loop vectorizer, SLP vectorizer, and possibly other places.
Although this is a 'no functional change' patch, I've added a testcase to verify that the exact
flag is preserved by the loop vectorizer. The wrapping and fast-math flags are already checked
in existing testcases.
Differential Revision: http://reviews.llvm.org/D5138
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216886 91177308-0d34-0410-b5e6-96231b3b80d8
chain became completely broken here as *all* intrinsic users ended up
being skipped, and the ones that seemed to be singled out were actually
the exact wrong set.
This is a great example of why long else-if chains can be easily
confusing. Switch the entire code to use early exits and early continues
to have simpler (and more importantly, correct) logic here, as well as
fixing the reversed logic for detecting and continuing on lifetime
intrinsics.
I've also significantly cleaned up the test case and added another test
case demonstrating an example where the optimization is not (trivially)
safe to perform.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216871 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the hint mechanism relied on clean up passes to remove redundant
metadata, which still showed up if running opt at low levels of optimization.
That also has shown that multiple nodes of the same type, but with different
values could still coexist, even if temporary, and cause confusion if the
next pass got the wrong value.
This patch makes sure that, if metadata already exists in a loop, the hint
mechanism will never append a new node, but always replace the existing one.
It also enhances the algorithm to cope with more metadata types in the future
by just adding a new type, not a lot of code.
Re-applying again due to MSVC 2013 being minimum requirement, and this patch
having C++11 that MSVC 2012 didn't support.
Fixes PR20655.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216870 91177308-0d34-0410-b5e6-96231b3b80d8
This feeds AA through the IFI structure into the inliner so that
AddAliasScopeMetadata can use AA->getModRefBehavior to figure out which
functions only access their arguments (instead of just hard-coding some
knowledge of memory intrinsics). Most of the information is only available from
BasicAA; this is important for preserving alias scoping information for
target-specific intrinsics when doing the noalias parameter attribute to
metadata conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216866 91177308-0d34-0410-b5e6-96231b3b80d8
I thought that I had fixed this problem in r216818, but I did not do a very
good job. The underlying issue is that when we add alias.scope metadata we are
asserting that this metadata completely describes the aliasing relationships
within the current aliasing scope domain, and so in the context of translating
noalias argument attributes, the pointers must all be based on noalias
arguments (as underlying objects) and have no other kind of underlying object.
In r216818 excluding appropriate accesses from getting alias.scope metadata is
done by looking for underlying objects that are not identified function-local
objects -- but that's wrong because allocas, etc. are also function-local
objects and we need to explicitly check that all underlying objects are the
noalias arguments for which we're adding metadata aliasing scopes.
This fixes the underlying-object check for adding alias.scope metadata, and
does some refactoring of the related capture-checking eligibility logic (and
adds more comments; hopefully making everything a bit clearer).
Fixes self-hosting on x86_64 with -mllvm -enable-noalias-to-md-conversion (the
feature is still disabled by default).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216863 91177308-0d34-0410-b5e6-96231b3b80d8
The previous implementation of AddAliasScopeMetadata, which adds noalias
metadata to preserve noalias parameter attribute information when inlining had
a flaw: it would add alias.scope metadata to accesses which might have been
derived from pointers other than noalias function parameters. This was
incorrect because even some access known not to alias with all noalias function
parameters could easily alias with an access derived from some other pointer.
Instead, when deriving from some unknown pointer, we cannot add alias.scope
metadata at all. This fixes a miscompile of the test-suite's tramp3d-v4.
Furthermore, we cannot add alias.scope to functions unless we know they
access only argument-derived pointers (currently, we know this only for
memory intrinsics).
Also, we fix a theoretical problem with using the NoCapture attribute to skip
the capture check. This is incorrect (as explained in the comment added), but
would not matter in any code generated by Clang because we get only inferred
nocapture attributes in Clang-generated IR.
This functionality is not yet enabled by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216818 91177308-0d34-0410-b5e6-96231b3b80d8
consider: (and (icmp X, Y), (and Z, (icmp A, B)))
It may be possible to combine (icmp X, Y) with (icmp A, B).
If we successfully combine, create an 'and' instruction with Z.
This fixes PR20814.
N.B. There is room for improvement after this change but I'm not
convinced it's worth chasing yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216814 91177308-0d34-0410-b5e6-96231b3b80d8
Don't promote byval pointer arguments when when their size in bits is
not equal to their alloc size in bits. This can happen for x86_fp80,
where the size in bits is 80 but the alloca size in bits in 128.
Promoting these types can break passing unions of x86_fp80s and other
types.
Patch by Thomas Jablin!
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D5057
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216693 91177308-0d34-0410-b5e6-96231b3b80d8
InstSimplify already handles icmp (X+Y), X (and things like it)
appropriately. The first thing that InstCombine does is run
InstSimplify on the instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216659 91177308-0d34-0410-b5e6-96231b3b80d8
For a detailed description of the problem see the comment in the test file.
The problematic moveBefore() calls are not required anymore because the new
scheduling algorithm ensures a correct ordering anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216656 91177308-0d34-0410-b5e6-96231b3b80d8
Several combines involving icmp (shl C2, %X) C1 can be simplified
without introducing any new instructions. Move them to InstSimplify;
while we are at it, make them more powerful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216642 91177308-0d34-0410-b5e6-96231b3b80d8
We try to perform this transform in InstSimplify but we aren't always
able to. Sometimes, we need to insert a bitcast if X and Y don't have
the same time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216598 91177308-0d34-0410-b5e6-96231b3b80d8
We supported transforming:
(gep i8* X, -(ptrtoint Y))
to:
(inttoptr (sub (ptrtoint X), (ptrtoint Y)))
However, this only fired if 'X' had type i8*. Generalize this to
support various types of different sizes. This results in much better
CodeGen, especially for pointers to packed structs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216523 91177308-0d34-0410-b5e6-96231b3b80d8
(X >> Z) & (Y >> Z) -> (X&Y) >> Z for all shifts.
(X >> Z) | (Y >> Z) -> (X|Y) >> Z for all shifts.
(X >> Z) ^ (Y >> Z) -> (X^Y) >> Z for all shifts.
These patterns were previously handled separately in visitAnd()/visitOr()/visitXor().
Differential Revision: http://reviews.llvm.org/D4951
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216443 91177308-0d34-0410-b5e6-96231b3b80d8
Adding, removing, or changing non-pack parameters can change the ABI
classification of pack parameters. Clang and other frontends encode the
classification in the IR of the call site, but the callee side
determines it dynamically based on the number of registers consumed so
far. Changing the prototype affects the number of registers consumed
would break such code.
Dead argument elimination performs a similar task and already has a
similar check to avoid this problem.
Patch by Thomas Jablin!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216421 91177308-0d34-0410-b5e6-96231b3b80d8
Take a StringRef instead of a "const char *".
Take a "std::error_code &" instead of a "std::string &" for error.
A create static method would be even better, but this patch is already a bit too
big.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216393 91177308-0d34-0410-b5e6-96231b3b80d8
GlobalDCE deletes global vars and updates their initializers to nullptr
while leaving underlying constants to be cleaned up later by its uses.
The clean up may never happen, fix this by forcing it every time it's
safe to destroy constants.
Final patch by Rafael Espindola
http://reviews.llvm.org/D4931
<rdar://problem/17523868>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216390 91177308-0d34-0410-b5e6-96231b3b80d8
