temporarily while we work on plumbing through some changes to continue
supporting gdb on darwin.
This reverts commit r179122.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179222 91177308-0d34-0410-b5e6-96231b3b80d8
Compact unwind has an encoding for when we're not able to generate compact
unwind and must generate an EH frame instead. Track that, but still emit that CU
encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179220 91177308-0d34-0410-b5e6-96231b3b80d8
into the operand array of the start of the memory reference descriptor.
Additional code in EncodeInstruction provides an additional adjustment.
This patch places that additional code in a separate function,
called getOperandBias, so that any caller of getMemoryOperandNo
can also call getOperandBias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179211 91177308-0d34-0410-b5e6-96231b3b80d8
wasn't always the start of the operand. If there was a symbol reference, then
Start pointed to that token. It's very likely there are other places that need
to be updated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179210 91177308-0d34-0410-b5e6-96231b3b80d8
to disable following tests for Hexagon that require direct object
generation support.
DebugInfo/dwarf-public-names.ll
DebugInfo/dwarf-version.ll
DebugInfo/member-pointers.ll
DebugInfo/namespace.ll
DebugInfo/two-cus-from-same-file.ll
Fixes bug 15616 - http://llvm.org/bugs/show_bug.cgi?id=15616
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179209 91177308-0d34-0410-b5e6-96231b3b80d8
I've not seen this happen in practice, and probably can't until we start
allowing decrement-counter-based conditional branches to be double predicated,
but just in case, don't allow predication of a diamond in which both sides have
ctr-defining branches. Even though the branching behavior of these can be
predicated, the counter-decrementing behavior cannot be.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179199 91177308-0d34-0410-b5e6-96231b3b80d8
Test cases that regressed due to r179115, plus a few more, were added in
r179182. Original commit message below:
[ms-inline asm] Use parsePrimaryExpr in lieu of parseExpression if we need to
parse an identifier. Otherwise, parseExpression may parse multiple tokens,
which makes it impossible to properly compute an immediate displacement.
An example of such a case is the source operand (i.e., [Symbol + ImmDisp]) in
the below example:
__asm mov eax, [Symbol + ImmDisp]
Part of rdar://13611297
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179187 91177308-0d34-0410-b5e6-96231b3b80d8
Mips32 code as Mips16 unless it can't be compiled as Mips 16. For now this
would happen as long as floating point instructions are not needed.
Probably it would also make sense to compile as mips32 if atomic operations
are needed too. There may be other cases too.
A module pass prescans the IR and adds the mips16 or nomips16 attribute
to functions depending on the functions needs.
Mips 16 mode can result in a 40% code compression by utililizing 16 bit
encoding of many instructions.
The hope is for this to replace the traditional gcc way of dealing with
Mips16 code using floating point which involves essentially using soft float
but with a library implemented using mips32 floating point. This gcc
method also requires creating stubs so that Mips32 code can interact with
these Mips 16 functions that have floating point needs. My conjecture is
that in reality this traditional gcc method would never win over this
new method.
I will be implementing the traditional gcc method also. Some of it is already
done but I needed to do the stubs to finish the work and those required
this mips16/32 mixed mode capability.
I have more ideas for to make this new method much better and I think the old
method will just live in llvm for anyone that needs the backward compatibility
but I don't for what reason that would be needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179185 91177308-0d34-0410-b5e6-96231b3b80d8
Since we only ever instantiate with a type that is a MachOType instantiation,
we don't need to pass template argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179178 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I did a local comparison between using bash and using lit's runner, and
more of the suite passes with lit than passes with bash. Most of the
bash failures have to do with /dev/null, which is nonsensical on
Windows, but the lit runner handles it.
The lit shell runner is also much faster than bash, so I would expect
most Windows devs would want it by default.
The behavior can be overridden on any OS by setting
LIT_USE_INTERNAL_SHELL to 0 or 1 in the environment.
Reviewers: chapuni, ddunbar
CC: llvm-commits, timurrrr
Differential Revision: http://llvm-reviews.chandlerc.com/D559
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179173 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions aren't universally available, but depend on a specific
extension to the normal ARM architecture (rather than, say, v6/v7/...) so a new
feature is appropriate.
This also enables the feature by default on A-class cores which usually have
these extensions, to avoid breaking existing code and act as a sensible
default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179171 91177308-0d34-0410-b5e6-96231b3b80d8
rather than checking if the source and destination have the same number of
arguments and copying the attributes over directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179169 91177308-0d34-0410-b5e6-96231b3b80d8
Depending on the number of bits set in the writemask.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179166 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179165 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179164 91177308-0d34-0410-b5e6-96231b3b80d8
This adds in-principle support for if-converting the bctr[l] instructions.
These instructions are used for indirect branching. It seems, however, that the
current if converter will never actually predicate these. To do so, it would
need the ability to hoist a few setup insts. out of the conditionally-executed
block. For example, code like this:
void foo(int a, int (*bar)()) { if (a != 0) bar(); }
becomes:
...
beq 0, .LBB0_2
std 2, 40(1)
mr 12, 4
ld 3, 0(4)
ld 11, 16(4)
ld 2, 8(4)
mtctr 3
bctrl
ld 2, 40(1)
.LBB0_2:
...
and it would be safe to do all of this unconditionally with a predicated
beqctrl instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179156 91177308-0d34-0410-b5e6-96231b3b80d8
The target hooks are getting out of hand. What does it mean to run
before or after regalloc anyway? Allowing either Pass* or AnalysisID
pass identification should make it much easier for targets to use the
substitutePass and insertPass APIs, and create less need for badly
named target hooks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179140 91177308-0d34-0410-b5e6-96231b3b80d8
Modifier 'D' is to use the second word of a double integer.
We had previously implemented the pure register varient of
the modifier and this patch implements the memory reference.
#include "stdio.h"
int b[8] = {0,1,2,3,4,5,6,7};
void main()
{
int i;
// The first word. Notice, no 'D'
{asm (
"lw %0,%1;"
: "=r" (i)
: "m" (*(b+4))
);}
printf("%d\n",i);
// The second word
{asm (
"lw %0,%D1;"
: "=r" (i)
: "m" (*(b+4))
);}
printf("%d\n",i);
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179135 91177308-0d34-0410-b5e6-96231b3b80d8
This enables us to form predicated branches (which are the same conditional
branches we had before) and also a larger set of predicated returns (including
instructions like bdnzlr which is a conditional return and loop-counter
decrement all in one).
At the moment, if conversion does not capture all possible opportunities. A
simple example is provided in early-ret2.ll, where if conversion forms one
predicated return, and then the PPCEarlyReturn pass picks up the other one. So,
at least for now, we'll keep both mechanisms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179134 91177308-0d34-0410-b5e6-96231b3b80d8
and mips16 on a per function basis.
Because this patch is somewhat involved I have provide an overview of the
key pieces of it.
The patch is written so as to not change the behavior of the non mixed
mode. We have tested this a lot but it is something new to switch subtargets
so we don't want any chance of regression in the mainline compiler until
we have more confidence in this.
Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1.
For that reason there are derived versions of the register info, frame info,
instruction info and instruction selection classes.
Now we register three separate passes for instruction selection.
One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then
one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and
MipsSEISelDAGToDAG.cpp).
When the ModuleISel pass runs, it determines if there is a need to switch
subtargets and if so, the owning pointers in MipsTargetMachine are
appropriately changed.
When 16Isel or SEIsel is run, they will return immediately without doing
any work if the current subtarget mode does not apply to them.
In addition, MipsAsmPrinter needs to be reset on a function basis.
The pass BasicTargetTransformInfo is substituted with a null pass since the
pass is immutable and really needs to be a function pass for it to be
used with changing subtargets. This will be fixed in a follow on patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds the infrastructure for performing bottom-up SLP vectorization (and other optimizations) on parallel computations.
The infrastructure has three potential users:
1. The loop vectorizer needs to be able to vectorize AOS data structures such as (sum += A[i] + A[i+1]).
2. The BB-vectorizer needs this infrastructure for bottom-up SLP vectorization, because bottom-up vectorization is faster to compute.
3. A loop-roller needs to be able to analyze consecutive chains and roll them into a loop, in order to reduce code size. A loop roller does not need to create vector instructions, and this infrastructure separates the chain analysis from the vectorization.
This patch also includes a simple (100 LOC) bottom up SLP vectorizer that uses the infrastructure, and can vectorize this code:
void SAXPY(int *x, int *y, int a, int i) {
x[i] = a * x[i] + y[i];
x[i+1] = a * x[i+1] + y[i+1];
x[i+2] = a * x[i+2] + y[i+2];
x[i+3] = a * x[i+3] + y[i+3];
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179117 91177308-0d34-0410-b5e6-96231b3b80d8
parse an identifier. Otherwise, parseExpression may parse multiple tokens,
which makes it impossible to properly compute an immediate displacement.
An example of such a case is the source operand (i.e., [Symbol + ImmDisp]) in
the below example:
__asm mov eax, [Symbol + ImmDisp]
The existing test cases exercise this patch.
rdar://13611297
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179115 91177308-0d34-0410-b5e6-96231b3b80d8
therefore not at all) of the pc or statement list. We also don't
need to emit the compilation dir so save so space and time
and don't bother.
Fix up the testcase accordingly and verify that we don't emit
the attributes or the items that they use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179114 91177308-0d34-0410-b5e6-96231b3b80d8
Some general cleanup and only scan the end of a BB for branches (once we're
done with the terminators and debug values, then there should not be any other
branches). These address post-commit review suggestions by Bill Schmidt.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179112 91177308-0d34-0410-b5e6-96231b3b80d8
