Now even the small structures could be passed within byval (small enough
to be stored in GPRs).
In regression tests next function prototypes are checked:
PR15293:
%artz = type { i32 }
define void @foo(%artz* byval %s)
define void @foo2(%artz* byval %s, i32 %p, %artz* byval %s2)
foo: "s" stored in R0
foo2: "s" stored in R0, "s2" stored in R2.
Next AAPCS rules are checked:
5.5 Parameters Passing, C.4 and C.5,
"ParamSize" is parameter size in 32bit words:
-- NSAA != 0, NCRN < R4 and NCRN+ParamSize > R4.
Parameter should be sent to the stack; NCRN := R4.
-- NSAA != 0, and NCRN < R4, NCRN+ParamSize < R4.
Parameter stored in GPRs; NCRN += ParamSize.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181148 91177308-0d34-0410-b5e6-96231b3b80d8
X86ISelLowering has support to treat:
(icmp ne (and (xor %flags, -1), (shl 1, flag)), 0)
as if it were actually:
(icmp eq (and %flags, (shl 1, flag)), 0)
However, r179386 has code at the InstCombine level to handle this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181145 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for min/max reductions when "no-nans-float-math" is enabled. This
allows us to assume we have ordered floating point math and treat ordered and
unordered predicates equally.
radar://13723044
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181144 91177308-0d34-0410-b5e6-96231b3b80d8
We can just use the initial element that feeds the reduction.
max(max(x, y), z) == max(max(x,y), max(x,z))
radar://13723044
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181141 91177308-0d34-0410-b5e6-96231b3b80d8
This removes dire warnings about AArch64 being unsupported and enables
the tests when appropriate on this platform.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181135 91177308-0d34-0410-b5e6-96231b3b80d8
The MOVZ/MOVK instruction sequence may not be the most efficient (a
literal-pool load could be better) but adding that would require
reinstating the ConstantIslands pass.
For now the sequence is correct, and that's enough. Beware, as of
commit GNU ld does not appear to support the relocations needed for
this. Its primary purpose (for now) will be to support JITed code,
since in that case there is no guarantee of where your code will end
up in memory relative to external symbols it references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181117 91177308-0d34-0410-b5e6-96231b3b80d8
The intended semantics mirror autoconf, where the user is able to
specify a host triple, but if it's left to the build system then
"config.guess" is invoked for the default.
This also renames the LLVM_HOSTTRIPLE define to LLVM_HOST_TRIPLE to
fit in with the style of the surrounding defines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181112 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for PowerPC platform-specific variant
kinds in MCSymbolRefExpr::getVariantKindForName, and also
adds a test case to verify they are translated to the appropriate
fixup type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181053 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a couple of Book II instructions (isync, icbi) to the
PowerPC assembler parser. These are needed when bootstrapping clang
with the integrated assembler forced on, because they are used in
inline asm statements in the code base.
The test case adds the full list of Book II storage control instructions,
including associated extended mnemonics. Again, those that are not yet
supported as marked as FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181052 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds infrastructure to support extended mnemonics in the
PowerPC assembler parser. It adds support specifically for those
extended mnemonics that LLVM will itself generate.
The test case lists *all* extended mnemonics according to the
PowerPC ISA v2.06 Book I, but marks those not yet supported
as FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181051 91177308-0d34-0410-b5e6-96231b3b80d8
This adds assembler parser support to the PowerPC back end.
The parser will run for any powerpc-*-* and powerpc64-*-* triples,
but was tested only on 64-bit Linux. The supported syntax is
intended to be compatible with the GNU assembler.
The parser does not yet support all PowerPC instructions, but
it does support anything that is generated by LLVM itself.
There is no support for testing restricted instruction sets yet,
i.e. the parser will always accept any instructions it knows,
no matter what feature flags are given.
Instruction operands will be checked for validity and errors
generated. (Error handling in general could still be improved.)
The patch adds a number of test cases to verify instruction
and operand encodings. The tests currently cover all instructions
from the following PowerPC ISA v2.06 Book I facilities:
Branch, Fixed-point, Floating-Point, and Vector.
Note that a number of these instructions are not yet supported
by the back end; they are marked with FIXME.
A number of follow-on check-ins will add extra features. When
they are all included, LLVM passes all tests (including bootstrap)
when using clang -cc1as as the system assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181050 91177308-0d34-0410-b5e6-96231b3b80d8
its fields.
This removes false dependencies between DSP instructions which access different
fields of the the control register. Implicit register operands are added to
instructions RDDSP and WRDSP after instruction selection, depending on the
value of the mask operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181041 91177308-0d34-0410-b5e6-96231b3b80d8
By supporting the vectorization of PHINodes with more than two incoming values we can increase the complexity of nested if statements.
We can now vectorize this loop:
int foo(int *A, int *B, int n) {
for (int i=0; i < n; i++) {
int x = 9;
if (A[i] > B[i]) {
if (A[i] > 19) {
x = 3;
} else if (B[i] < 4 ) {
x = 4;
} else {
x = 5;
}
}
A[i] = x;
}
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181037 91177308-0d34-0410-b5e6-96231b3b80d8
Build attribute sections can now be read if they exist via ELFObjectFile, and
the llvm-readobj tool has been extended with an option to dump this information
if requested. Regression tests are also included which exercise these features.
Also update the docs with a fixed ARM ABI link and a new link to the Addenda
which provides the build attributes specification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181009 91177308-0d34-0410-b5e6-96231b3b80d8
register.
- Define pseudo instructions which store or load ccond field of the DSP
control register.
- Emit the pseudos in MipsSEInstrInfo::storeRegToStack and loadRegFromStack.
- Expand the pseudos before callee-scan save.
- Emit instructions RDDSP or WRDSP to copy between ccond field and GPRs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180969 91177308-0d34-0410-b5e6-96231b3b80d8
* lib/Target/Hexagon/HexagonInstrInfo.td: Add patterns to combine a
sequence of a pair of i32->i64 extensions followed by a "bitwise or"
into COMBINE_rr.
* lib/Target/Hexagon/HexagonPeephole.cpp: Copy propagate Rx in the
instruction Rp = COMBINE_Ir_V4(0, Rx) to the uses of Rp:subreg_loreg.
* test/CodeGen/Hexagon/union-1.ll: New test.
* test/CodeGen/Hexagon/combine_ir.ll: Fix test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180946 91177308-0d34-0410-b5e6-96231b3b80d8
Shuffles are more difficult to lower and we usually don't touch them, while we do optimize selects more often.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180875 91177308-0d34-0410-b5e6-96231b3b80d8
Optimize CONCAT_VECTOR nodes that merge EXTRACT_SUBVECTOR values that extract from the same vector.
rdar://13402653
PR15866
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180871 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r180802
There's ongoing discussion about whether this is the right place to make
this transformation. Reverting for now while we figure it out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180834 91177308-0d34-0410-b5e6-96231b3b80d8
Expand copy instructions between two accumulator registers before callee-saved
scan is done. Handle copies between integer GPR and hi/lo registers in
MipsSEInstrInfo::copyPhysReg. Delete pseudo-copy instructions that are not
needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180827 91177308-0d34-0410-b5e6-96231b3b80d8
register-indirect address with an offset of 0.
It used to be that a DBG_VALUE is a register-indirect value if the offset
(operand 1) is nonzero. The new convention is that a DBG_VALUE is
register-indirect if the first operand is a register and the second
operand is an immediate. For plain registers use the combination reg, reg.
rdar://problem/13658587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180816 91177308-0d34-0410-b5e6-96231b3b80d8
Always fold a shuffle-of-shuffle into a single shuffle when there's only one
input vector in the first place. Continue to be more conservative when there's
multiple inputs.
rdar://13402653
PR15866
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180802 91177308-0d34-0410-b5e6-96231b3b80d8
First, taking advantage of the fact that the virtual base registers are allocated in order of the local frame offsets, remove the quadratic register-searching behavior. Because of the ordering, we only need to check the last virtual base register created.
Second, store the frame index in the FrameRef structure, and get the frame index and the local offset from this structure at the top of the loop iteration. This allows us to de-nest the loops in insertFrameReferenceRegisters (and I think makes the code cleaner). I also moved the needsFrameBaseReg check into the first loop over instructions so that we don't bother pushing FrameRefs for instructions that don't want a virtual base register anyway.
Lastly, and this is the only functionality change, avoid the creation of single-use virtual base registers. These are currently not useful because, in general, they end up replacing what would be one r+r instruction with an add and a r+i instruction. Committing this removes the XFAIL in CodeGen/PowerPC/2007-09-07-LoadStoreIdxForms.ll
Jim has okayed this off-list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180799 91177308-0d34-0410-b5e6-96231b3b80d8
