A helper routine, MultiplyOverflows, was a less efficient
reimplementation of APInt's smul_ov and umul_ov. While we are here,
clean up the code so it's more uniform.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219583 91177308-0d34-0410-b5e6-96231b3b80d8
Consider the case where X is 2. (2 <<s 31)/s-2147483648 is zero but we
would fold to X. Note that this is valid when we are in the unsigned
domain because we require NUW: 2 <<u 31 results in poison.
This fixes PR21245.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219568 91177308-0d34-0410-b5e6-96231b3b80d8
consider:
C1 = INT_MIN
C2 = -1
C1 * C2 overflows without a doubt but consider the following:
%x = i32 INT_MIN
This means that (%X /s C1) is 1 and (%X /s C1) /s C2 is -1.
N. B. Move the unsigned version of this transform to InstSimplify, it
doesn't create any new instructions.
This fixes PR21243.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219567 91177308-0d34-0410-b5e6-96231b3b80d8
consider:
mul i32 nsw %x, -2147483648
this instruction will not result in poison if %x is 1
however, if we transform this into:
shl i32 nsw %x, 31
then we will be generating poison because we just shifted into the sign
bit.
This fixes PR21242.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219566 91177308-0d34-0410-b5e6-96231b3b80d8
getSmallConstantTripCount even when it isn't the exiting block.
I missed this in my first audit, very sorry. This was found in LNT and
elsewhere. I don't have a test case, but it was completely obvious from
inspection that this was the problem. I'll see if I can reduce a test
case, but I'm not really hopeful, and the value seems quite low.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219562 91177308-0d34-0410-b5e6-96231b3b80d8
routines and fix all of the bugs they expose.
I hit a test case that crashed even without these asserts due to passing
a non-exiting latch to the ExitingBlock parameter of the trip count
computation machinery. However, when I add the nice asserts, it turns
out we have plenty of coverage of these bugs, they just didn't manifest
in crashers.
The core problem seems to stem from an assumption that the latch *is*
the exiting block. While this is often true, and somewhat the "normal"
way to think about loops, it isn't necessarily true. The correct way to
call the trip count routines in a *generic* fashion (that is, without
a particular exit in mind) is to just use the loop's single exiting
block if it has one. The trip count can't be computed generically unless
it does. This works great for the loop vectorizer. The loop unroller
actually *wants* to select the latch when it has to chose between
multiple exits because for unrolling it is the latch trips that matter.
But if this is the desire, it needs to explicitly guard for non-exiting
latches and check for the generic trip count in that case.
I've added the asserts, and added convenience APIs for querying the trip
count generically that check for a single exit block. I've kept the APIs
consistent between computing trip count and trip multiples.
Thansk to Mark for the help debugging and tracking down the *right* fix
here!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219550 91177308-0d34-0410-b5e6-96231b3b80d8
instead
We used to transform this:
define void @test6(i1 %cond, i8* %ptr) {
entry:
br i1 %cond, label %bb1, label %bb2
bb1:
br label %bb2
bb2:
%ptr.2 = phi i8* [ %ptr, %entry ], [ null, %bb1 ]
store i8 2, i8* %ptr.2, align 8
ret void
}
into this:
define void @test6(i1 %cond, i8* %ptr) {
%ptr.2 = select i1 %cond, i8* null, i8* %ptr
store i8 2, i8* %ptr.2, align 8
ret void
}
because the simplifycfg transformation into selects would happen to happen
before the simplifycfg transformation that removes unreachable control flow
(We have 'unreachable control flow' due to the store to null which is undefined
behavior).
The existing transformation that removes unreachable control flow in simplifycfg
is:
/// If BB has an incoming value that will always trigger undefined behavior
/// (eg. null pointer dereference), remove the branch leading here.
static bool removeUndefIntroducingPredecessor(BasicBlock *BB)
Now we generate:
define void @test6(i1 %cond, i8* %ptr) {
store i8 2, i8* %ptr.2, align 8
ret void
}
I did not see any impact on the test-suite + externals.
rdar://18596215
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219462 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes a bug in method InstCombiner::FoldCmpCstShrCst where we
wrongly computed the distance between the highest bits set of two negative
values.
This fixes PR21222.
Differential Revision: http://reviews.llvm.org/D5700
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219406 91177308-0d34-0410-b5e6-96231b3b80d8
A function with discardable linkage cannot be discarded if its a member
of a COMDAT group without considering all the other COMDAT members as
well. This sort of thing is already handled by GlobalOpt/GlobalDCE.
This fixes PR21206.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219335 91177308-0d34-0410-b5e6-96231b3b80d8
A linkonce_odr member of a COMDAT shouldn't be dropped if we need to
keep the entire COMDAT group.
This fixes PR21191.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219283 91177308-0d34-0410-b5e6-96231b3b80d8
The icmp-select-icmp optimization targets select-icmp.eq
only. This is now ensured by testing the branch predicate
explictly. This commit also includes the test case for pr21199.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219282 91177308-0d34-0410-b5e6-96231b3b80d8
This is somewhat the inverse of how similar bugs in DAE and ArgPromo
manifested and were addressed. In those passes, individual call sites
were visited explicitly, and then the old function was deleted. This
left the debug info with a null llvm::Function* that needed to be
updated to point to the new function.
In the case of DFSan, it RAUWs the old function with the wrapper, which
includes debug info. So now the debug info refers to the wrapper, which
doesn't actually have any instructions with debug info in it, so it is
ignored entirely - resulting in a DW_TAG_subprogram with no high/low pc,
etc. Instead, fix up the debug info to refer to the original function
after the RAUW messed it up.
Reviewed/discussed with Peter Collingbourne on the llvm-dev mailing
list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219249 91177308-0d34-0410-b5e6-96231b3b80d8
`LoopUnrollPass` says that it preserves `LoopInfo` -- make it so. In
particular, tell `LoopInfo` about copies of inner loops when unrolling
the outer loop.
Conservatively, also tell `ScalarEvolution` to forget about the original
versions of these loops, since their inputs may have changed.
Fixes PR20987.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219241 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization tries to convert switch instructions that are used to select a value with only 2 unique cases + default block
to a select or a couple of selects (depending if the default block is reachable or not).
The typical case this optimization wants to be able to optimize is this one:
Example:
switch (a) {
case 10: %0 = icmp eq i32 %a, 10
return 10; %1 = select i1 %0, i32 10, i32 4
case 20: ----> %2 = icmp eq i32 %a, 20
return 2; %3 = select i1 %2, i32 2, i32 %1
default:
return 4;
}
It also sets the base for further optimizations that are planned and being reviewed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219223 91177308-0d34-0410-b5e6-96231b3b80d8
After some stellar (& inspired) help from Reid Kleckner providing a test
case for some rather unstable undefined behavior showing up as
assertions produced by r214761, I was able to fix this issue in DAE
involving the application of both varargs removal, followed by normal
argument removal.
Indeed I introduced this same bug into ArgumentPromotion (r212128) by
copying the code from DAE, and when I fixed the bug in ArgPromo
(r213805) and commented in that patch that I didn't need to address the
same issue in DAE because it was a single pass. Turns out it's two pass,
one for the varargs and one for the normal arguments, so the same fix is
needed (at least during varargs removal). So here it is.
(the observable/net effect of this bug, even when it didn't result in
assertion failure, is that debug info would describe the DAE'd function
in the abstract, but wouldn't provide high/low_pc, variable locations,
line table, etc (it would appear as though the function had been
entirely optimized away), see the original PR14016 for details of the
general problem)
I'm not recommitting the assertion just yet, as there's been another
regression of it since I last tried. It might just be a few test cases
weren't adequately updated after Adrian or Duncan's recent schema
changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219210 91177308-0d34-0410-b5e6-96231b3b80d8
If we require a single member of a comdat, require all of the other
members as well.
This fixes PR20981.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219191 91177308-0d34-0410-b5e6-96231b3b80d8
Takes care of the assert that caused build fails.
Rather than asserting the code checks now that the definition
and use are in the same block, and does not attempt
to optimize when that is not the case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219175 91177308-0d34-0410-b5e6-96231b3b80d8
Particularly, it addresses cases where Reassociate breaks Subtracts but then fails to optimize combinations like I1 + -I2 where I1 and I2 have the same rank and are identical.
Patch by Dmitri Shtilman.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219092 91177308-0d34-0410-b5e6-96231b3b80d8
Joerg suggested on IRC that I look at generalizing the logic from r219067 to
handle more general redundancies (like removing an assume(x > 3) dominated by
an assume(x > 5)). The way to do this would be to ask ValueTracking to
determine the value of the i1 argument. It turns out that ValueTracking is not
very good at this right now (although it does get the trivial redundancy case)
because it does not understand ICmps. Nevertheless, the resulting code in
InstCombine is simpler than r219067, so we might as well do it now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219070 91177308-0d34-0410-b5e6-96231b3b80d8
For any @llvm.assume intrinsic, if there is another which dominates it and uses
the same condition, then it is redundant and can be removed. While this does
not alter the semantics of the @llvm.assume intrinsics, it makes subsequent
handling more efficient (and the resulting IR easier to read).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219067 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root cause of the latter
was a tightened-up check in `DILexicalBlock::Verify()`, so I'll file a
PR to investigate who requires the loose check (and why).
Original commit message follows.
--
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219010 91177308-0d34-0410-b5e6-96231b3b80d8
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218914 91177308-0d34-0410-b5e6-96231b3b80d8
When unsafe-fp-math is enabled, we can turn sqrt(X) * sqrt(X) into X.
This can happen in the real world when calculating x ** 3/2. This occurs
in test-suite/SingleSource/Benchmarks/BenchmarkGame/n-body.c.
Differential Revision: http://reviews.llvm.org/D5584
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218906 91177308-0d34-0410-b5e6-96231b3b80d8
My commit rL216160 introduced a bug PR21014: IndVars widens code 'for (i = ; i < ...; i++) arr[ CONST - i]' into 'for (i = ; i < ...; i++) arr[ i - CONST]'
thus inverting index expression. This patch fixes it.
Thanks to Jörg Sonnenberger for pointing.
Differential Revision: http://reviews.llvm.org/D5576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218867 91177308-0d34-0410-b5e6-96231b3b80d8
`DIExpression`'s elements are 64-bit integers that are stored as
`ConstantInt`. The accessors already encapsulate the storage. This
commit updates the `DIBuilder` API to also encapsulate that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218797 91177308-0d34-0410-b5e6-96231b3b80d8
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
Note: I accidentally committed a bogus older version of this patch previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218787 91177308-0d34-0410-b5e6-96231b3b80d8
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218778 91177308-0d34-0410-b5e6-96231b3b80d8
The icmp-select-icmp optimization made the implicit assumption
that the select-icmp instructions are in the same block and asserted on it.
The fix explicitly checks for that condition and conservatively suppresses
the optimization when it is violated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218735 91177308-0d34-0410-b5e6-96231b3b80d8
In special cases select instructions can be eliminated by
replacing them with a cheaper bitwise operation even when the
select result is used outside its home block. The instances implemented
are patterns like
%x=icmp.eq
%y=select %x,%r, null
%z=icmp.eq|neq %y, null
br %z,true, false
==> %x=icmp.ne
%y=icmp.eq %r,null
%z=or %x,%y
br %z,true,false
The optimization is integrated into the instruction
combiner and performed only when all uses of the select result can
be replaced by the select operand proper. For this dominator information
is used and dominance is now a required analysis pass in the combiner.
The optimization itself is iterative. The critical step is to replace the
select result with the non-constant select operand. So the select becomes
local and the combiner iteratively works out simpler code pattern and
eventually eliminates the select.
rdar://17853760
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218721 91177308-0d34-0410-b5e6-96231b3b80d8
