that complex patterns are matched after the entire pattern has
a structural match, therefore the NodeStack isn't in a useful
state when the actual call to the matcher happens.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114489 91177308-0d34-0410-b5e6-96231b3b80d8
Since mem2reg isn't run at -O0, we get a ton of reloads from the stack,
for example, before, this code:
int foo(int x, int y, int z) {
return x+y+z;
}
used to compile into:
_foo: ## @foo
subq $12, %rsp
movl %edi, 8(%rsp)
movl %esi, 4(%rsp)
movl %edx, (%rsp)
movl 8(%rsp), %edx
movl 4(%rsp), %esi
addl %edx, %esi
movl (%rsp), %edx
addl %esi, %edx
movl %edx, %eax
addq $12, %rsp
ret
Now we produce:
_foo: ## @foo
subq $12, %rsp
movl %edi, 8(%rsp)
movl %esi, 4(%rsp)
movl %edx, (%rsp)
movl 8(%rsp), %edx
addl 4(%rsp), %edx ## Folded load
addl (%rsp), %edx ## Folded load
movl %edx, %eax
addq $12, %rsp
ret
Fewer instructions and less register use = faster compiles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113102 91177308-0d34-0410-b5e6-96231b3b80d8
- Check getBytesToPopOnReturn().
- Eschew ST0 and ST1 for return values.
- Fix the PIC base register initialization so that it doesn't ever
fail to end up the top of the entry block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108039 91177308-0d34-0410-b5e6-96231b3b80d8
U utils/TableGen/FastISelEmitter.cpp
--- Reverse-merging r107943 into '.':
U test/CodeGen/X86/fast-isel.ll
U test/CodeGen/X86/fast-isel-loads.ll
U include/llvm/Target/TargetLowering.h
U include/llvm/Support/PassNameParser.h
U include/llvm/CodeGen/FunctionLoweringInfo.h
U include/llvm/CodeGen/CallingConvLower.h
U include/llvm/CodeGen/FastISel.h
U include/llvm/CodeGen/SelectionDAGISel.h
U lib/CodeGen/LLVMTargetMachine.cpp
U lib/CodeGen/CallingConvLower.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
U lib/CodeGen/SelectionDAG/FunctionLoweringInfo.cpp
U lib/CodeGen/SelectionDAG/FastISel.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
U lib/CodeGen/SelectionDAG/ScheduleDAGSDNodes.cpp
U lib/CodeGen/SelectionDAG/InstrEmitter.cpp
U lib/CodeGen/SelectionDAG/TargetLowering.cpp
U lib/Target/XCore/XCoreISelLowering.cpp
U lib/Target/XCore/XCoreISelLowering.h
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86ISelLowering.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107987 91177308-0d34-0410-b5e6-96231b3b80d8
around everywhere, and also give it an InsertPt member, to enable isel
to operate at an arbitrary position within a block, rather than just
appending to a block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107791 91177308-0d34-0410-b5e6-96231b3b80d8
where multiple blocks are emitted; functions which do this need to return
the new BB so that their callers can stay current.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101843 91177308-0d34-0410-b5e6-96231b3b80d8
const_casts, and it reinforces the design of the Target classes being
immutable.
SelectionDAGISel::IsLegalToFold is now a static member function, because
PIC16 uses it in an unconventional way. There is more room for API
cleanup here.
And PIC16's AsmPrinter no longer uses TargetLowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101635 91177308-0d34-0410-b5e6-96231b3b80d8
1, 1 cases which are by-far the most frequent. This shrinks the X86
isel table from 77014 -> 74657 bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99740 91177308-0d34-0410-b5e6-96231b3b80d8
an MCSymbol. Make the EH_LABEL MachineInstr hold its label
with an MCSymbol instead of ID. Fix a bug in MMI.cpp which
would return labels named "Label4" instead of "label4".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98463 91177308-0d34-0410-b5e6-96231b3b80d8
entry we're about to process is obviously going to fail, don't
bother pushing a scope only to have it immediately be popped.
This avoids a lot of scope stack traffic in common cases.
Unfortunately, this requires duplicating some of the predicate
dispatch. To avoid duplicating the actual logic I pulled each
predicate out to its own static function which gets used in
both places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97651 91177308-0d34-0410-b5e6-96231b3b80d8
SwitchOpcodeMatcher) and have DAGISelMatcherOpt form it. This
speeds up selection, particularly for X86 which has lots of
variants of instructions with only type differences.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97645 91177308-0d34-0410-b5e6-96231b3b80d8
now that isel handles chains more aggressively. This also
allows us to make isLegalToFold non-virtual.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97597 91177308-0d34-0410-b5e6-96231b3b80d8
CopyToReg/CopyFromReg/INLINEASM. These are annoying because
they have the same opcode before an after isel. Fix this by
setting their NodeID to -1 to indicate that they are selected,
just like what automatically happens when selecting things that
end up being machine nodes.
With that done, give IsLegalToFold a new flag that causes it to
ignore chains. This lets the HandleMergeInputChains routine be
the one place that validates chains after a match is successful,
enabling the new hotness in chain processing. This smarter
chain processing eliminates the need for "PreprocessRMW" in the
X86 and MSP430 backends and enables MSP to start matching it's
multiple mem operand instructions more aggressively.
I currently #if out the dead code in the X86 backend and MSP
backend, I'll remove it for real in a follow-on patch.
The testcase changes are:
test/CodeGen/X86/sse3.ll: we generate better code
test/CodeGen/X86/store_op_load_fold2.ll: PreprocessRMW was
miscompiling this before, we now generate correct code
Convert it to filecheck while I'm at it.
test/CodeGen/MSP430/Inst16mm.ll: Add a testcase for mem/mem
folding to make anton happy. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97596 91177308-0d34-0410-b5e6-96231b3b80d8
was that we weren't properly handling the case when interior
nodes of a matched pattern become dead after updating chain
and flag uses. Now we handle this explicitly in
UpdateChainsAndFlags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97561 91177308-0d34-0410-b5e6-96231b3b80d8
DoInstructionSelection. Inline "SelectRoot" into it from DAGISelHeader.
Sink some other stuff out of DAGISelHeader into SDISel.
Eliminate the various 'Indent' stuff from various targets, which dates
to when isel was recursive.
17 files changed, 114 insertions(+), 430 deletions(-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97555 91177308-0d34-0410-b5e6-96231b3b80d8
stuff now that we don't care about emulating the old broken
behavior of the old isel. This eliminates the
'CheckChainCompatible' check (along with IsChainCompatible) which
did an incorrect and inefficient scan *up* the chain nodes which
happened as the pattern was being formed and does the validation
at the end in HandleMergeInputChains when it forms a structural
pattern. This scans "down" the graph, which means that it is
quickly bounded by nodes already selected. This also handles
token factors that get "trapped" in the dag.
Removing the CheckChainCompatible nodes also shrinks the
generated tables by about 6K for X86 (down to 83K).
There are two pieces remaining before I can nuke PreprocessRMW:
1. I xfailed a test because we're now producing worse code in a
case that has nothing to do with the change: it turns out that
our use of MorphNodeTo will leave dead nodes in the graph
which (depending on how the graph is walked) end up causing
bogus uses of chains and blocking matches. This is really
bad for other reasons, so I'll fix this in a follow-up patch.
2. CheckFoldableChainNode needs to be improved to handle the TF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97539 91177308-0d34-0410-b5e6-96231b3b80d8
ComplexPattern at the root be generated multiple times, once
for each opcode they are part of. This encourages factoring
because the opcode checks get treated just like everything
else in the matcher.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97439 91177308-0d34-0410-b5e6-96231b3b80d8
to a scope where every child starts with a CheckOpcode, but
executes more efficiently. Enhance DAGISelMatcherOpt to
form it.
This also fixes a bug in CheckOpcode: apparently the SDNodeInfo
objects are not pointer comparable, we have to compare the
enum name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97438 91177308-0d34-0410-b5e6-96231b3b80d8
(which gets #included into the middle of each
target's DAGISel class) into a .cpp file where it is
only compiled once.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97425 91177308-0d34-0410-b5e6-96231b3b80d8
CheckComplexPattern function. Though it is logically const,
I don't have the fortitude to clean up all the targets now,
and it not being const doesn't block anything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96426 91177308-0d34-0410-b5e6-96231b3b80d8
IsLegalToFold and IsProfitableToFold. The generic version of the later simply checks whether the folding candidate has a single use.
This allows the target isel routines more flexibility in deciding whether folding makes sense. The specific case we are interested in is folding constant pool loads with multiple uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96255 91177308-0d34-0410-b5e6-96231b3b80d8
(OP (trunc x), (trunc y)) -> (trunc (OP x, y))
Unfortunately this simple change causes dag combine to infinite looping. The problem is the shrink demanded ops optimization tend to canonicalize expressions in the opposite manner. That is badness. This patch disable those optimizations in dag combine but instead it is done as a late pass in sdisel.
This also exposes some deficiencies in dag combine and x86 setcc / brcond lowering. Teach them to look pass ISD::TRUNCATE in various places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92849 91177308-0d34-0410-b5e6-96231b3b80d8
