This should complete the job started in r231794 and continued in r232045:
We want to replace as much custom x86 shuffling via intrinsics
as possible because pushing the code down the generic shuffle
optimization path allows for better codegen and less complexity
in LLVM.
AVX2 introduced proper integer variants of the hacked integer insert/extract
C intrinsics that were created for this same functionality with AVX1.
This should complete the removal of insert/extract128 intrinsics.
The Clang precursor patch for this change was checked in at r232109.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232120 91177308-0d34-0410-b5e6-96231b3b80d8
The permps and permd instructions have their operands swapped compared to the
intrinsic definition. Therefore, they do not fall into the INTR_TYPE_2OP
category.
I did not create a new category for those two, as they are the only one AFAICT
in that case.
<rdar://problem/20108262>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232085 91177308-0d34-0410-b5e6-96231b3b80d8
Part of the folding logic implemented by function 'PerformISDSETCCCombine'
only worked under the assumption that the condition code in input could have
been either SETNE or SETEQ.
Unfortunately that assumption was incorrect, and in some cases the algorithm
ended up incorrectly folding SETCC nodes.
The incorrect folding only affected SETCC dag nodes where:
- one of the operands was a build_vector of all zeroes;
- the other operand was a SIGN_EXTEND from a vector of MVT:i1 elements;
- the condition code was neither SETNE nor SETEQ.
Example:
(setcc (v4i32 (sign_extend v4i1:%A)), (v4i32 VectorOfAllZeroes), setge)
Before this patch, the entire dag node sequence from the example was
incorrectly folded to node %A.
With this patch, the dag node sequence is folded to a
(xor %A, (v4i1 VectorOfAllOnes)).
Added test setcc-combine.ll.
Thanks to Greg Bedwell for spotting this issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232046 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we've replaced the vinsertf128 intrinsics,
do the same for their extract twins.
This is very much like D8086 (checked in at r231794):
We want to replace as much custom x86 shuffling via intrinsics
as possible because pushing the code down the generic shuffle
optimization path allows for better codegen and less complexity
in LLVM.
This is also the LLVM sibling to the cfe D8275 patch.
Differential Revision: http://reviews.llvm.org/D8276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232045 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, run both EH preparation passes, and have them both ignore
functions with unrecognized EH personalities. Pass delegation involved
some hacky code for creating an AnalysisResolver that we don't need now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231995 91177308-0d34-0410-b5e6-96231b3b80d8
CodeGen incorrectly ignores (assert from APInt) constant index bigger
than 2^64 in getelementptr instruction. This is a test and fix for that.
Patch by Paweł Bylica!
Reviewed By: rnk
Subscribers: majnemer, rnk, mcrosier, resistor, llvm-commits
Differential Revision: http://reviews.llvm.org/D8219
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231984 91177308-0d34-0410-b5e6-96231b3b80d8
If a function is going in an unique section (because of -ffunction-sections
for example), putting a jump table in .rodata will keep .rodata alive and
that will keep alive any other function that also has a jump table.
Instead, put the jump table in a unique section that is associated with the
function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231961 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The generic ELF TargetObjectFile defaults to .ctors, but Linux's
defaults to .init_array by calling InitializeELF with the value of
UseInitArray from TargetMachine. Make NaCl's behavior match.
Reviewers: jvoung
Differential Revision: http://reviews.llvm.org/D8240
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231934 91177308-0d34-0410-b5e6-96231b3b80d8
- Use TargetLowering to check for the actual cost of each extension.
- Provide a factorized method to check for the cost of an extension:
TargetLowering::isExtFree.
- Provide a virtual method TargetLowering::isExtFreeImpl for targets to be able
to tune the cost of non-free extensions.
This refactoring offers a better granularity to model what really happens on
different targets.
No performance changes and very few code differences.
Part of <rdar://problem/19267165>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231855 91177308-0d34-0410-b5e6-96231b3b80d8
Also it extracts getCopyFromRegs helper function in SelectionDAGBuilder as we need to be able to customize type of the register exported from basic block during lowering of the gc.result.
(Resubmitting this change after not being able to reproduce buildbot failure)
Differential Revision: http://reviews.llvm.org/D7760
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231800 91177308-0d34-0410-b5e6-96231b3b80d8
We want to replace as much custom x86 shuffling via intrinsics
as possible because pushing the code down the generic shuffle
optimization path allows for better codegen and less complexity
in LLVM.
This is the sibling patch for the Clang half of this change:
http://reviews.llvm.org/D8088
Differential Revision: http://reviews.llvm.org/D8086
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231794 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a subtle issue that was introduced in r205153.
When reusing a store for the extractelement expansion (to load directly
from it, inserting of going through the stack), later stores to the
same location might have overwritten the data we were expecting to
extract from.
To fix that, we need to explicitly replace the chain going out of the
reused store, so that later stores also have an explicit dependency on
the generated element-extracting loads, and can't clobber them.
rdar://20066785
Differential Revision: http://reviews.llvm.org/D8180
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231721 91177308-0d34-0410-b5e6-96231b3b80d8
Fix the double-deletion of AnalysisResolver when delegating through to
Dwarf EH preparation by creating one from scratch. Hopefully the new
pass manager simplifies this.
This reverts commit r229952.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231719 91177308-0d34-0410-b5e6-96231b3b80d8
In the case where just tables are part of the function section, this produces
more readable assembly by avoiding switching to the eh section and back
to .text.
This would also break with non unique section names, as trying to switch to
a unique section actually creates a new one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231677 91177308-0d34-0410-b5e6-96231b3b80d8
Also, replaced line with 'target triple' with flag -mtriple on the RUN line.
Removed the data layout string as it is not needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231654 91177308-0d34-0410-b5e6-96231b3b80d8
There were cases where the backend computed a wrong permute mask for a VPERM2X128 node.
Example:
\code
define <8 x float> @foo(<8 x float> %a, <8 x float> %b) {
%shuffle = shufflevector <8 x float> %a, <8 x float> %b, <8 x i32> <i32 undef, i32 undef, i32 6, i32 7, i32 undef, i32 undef, i32 6, i32 7>
ret <8 x float> %shuffle
}
\code end
Before this patch, llc (with -mattr=+avx) emitted the following vperm2f128:
vperm2f128 $0, %ymm0, %ymm0, %ymm0 # ymm0 = ymm0[0,1,0,1]
With this patch, llc emits a vperm2f128 with a correct permute mask:
vperm2f128 $17, %ymm0, %ymm0, %ymm0 # ymm0 = ymm0[2,3,2,3]
Differential Revision: http://reviews.llvm.org/D8119
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231601 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes the logic in the DAGCombiner that folds an AND node according
to rule: (and (X (load V)), C) -> (X (load V))
An AND between a vector load 'X' and a constant build_vector 'C' can be folded
into the load itself only if we can prove that the AND operation is redundant.
The algorithm implemented by 'visitAND' firstly computes the splat value 'S'
from C, and then checks if S has the lower 'B' bits set (where B is the size in
bits of the vector element type). The algorithm takes into account also the
'undef' bits in the splat mask.
Unfortunately, the algorithm only worked under the assumption that the size of S
is a multiple of the vector element type. With this patch, we conservatively
avoid folding the AND if the splat bits are not compatible with the vector
element type.
Added X86 test and-load-fold.ll
Differential Revision: http://reviews.llvm.org/D8085
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231563 91177308-0d34-0410-b5e6-96231b3b80d8
This patch attempts to convert a SCALAR_TO_VECTOR using an operand from an EXTRACT_VECTOR_ELT into a VECTOR_SHUFFLE.
This prevents many cases of spilling scalar data between the gpr + simd registers.
At present the optimization only accepts cases where there is no TRUNC of the scalar type (i.e. all types must match).
Differential Revision: http://reviews.llvm.org/D8132
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231554 91177308-0d34-0410-b5e6-96231b3b80d8
This is based on the following equivalences:
select(C0 & C1, X, Y) <=> select(C0, select(C1, X, Y), Y)
select(C0 | C1, X, Y) <=> select(C0, X, select(C1, X, Y))
Many target cannot perform and/or on the CPU flags and therefore the
right side should be choosen to avoid materializign the i1 flags in an
integer register. If the target can perform this operation efficiently
we normalize to the left form.
Differential Revision: http://reviews.llvm.org/D7622
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231507 91177308-0d34-0410-b5e6-96231b3b80d8
Though such shifts are usually optimized away by combiner, we still can
encounter them after a vector shift is legalized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231443 91177308-0d34-0410-b5e6-96231b3b80d8
This patch reduces code size for all AVX targets and increases speed for some chips.
SSE 4.1 introduced the useless (see code comments) 2-register form of BLENDV and
only in the packed float/double flavors.
AVX subsequently made the instruction useful by adding a 4-register operand form.
So we just need to paper over the lack of scalar forms of this instruction, complicate
the code to choose float or double forms, and use blendv on scalars since all FP is in
xmm registers anyway.
This gives us an approximately 50% speed up for a blendv microbenchmark sequence
on SandyBridge and Haswell:
blendv : 29.73 cycles/iter
logic : 43.15 cycles/iter
No new test cases with this patch because:
1. fast-isel-select-sse.ll tests the positive side for regular X86 lowering and fast-isel
2. sse-minmax.ll and fp-select-cmp-and.ll confirm that we're not firing for scalar selects without AVX
3. fp-select-cmp-and.ll and logical-load-fold.ll confirm that we're not firing for scalar selects with constants.
http://llvm.org/bugs/show_bug.cgi?id=22483
Differential Revision: http://reviews.llvm.org/D8063
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231408 91177308-0d34-0410-b5e6-96231b3b80d8
Currently shuffles may only be combined if they are of the same type, despite the fact that bitcasts are often introduced in between shuffle nodes (e.g. x86 shuffle type widening).
This patch allows a single input shuffle to peek through bitcasts and if the input is another shuffle will merge them, shuffling using the smallest sized type, and re-applying the bitcasts at the inputs and output instead.
Dropped old ShuffleToZext test - this patch removes the use of the zext and vector-zext.ll covers these anyhow.
Differential Revision: http://reviews.llvm.org/D7939
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231380 91177308-0d34-0410-b5e6-96231b3b80d8
Added lowering for ISD::CONCAT_VECTORS and ISD::INSERT_SUBVECTOR for i1 vectors,
it is needed to pass all masked_memop.ll tests for SKX.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231371 91177308-0d34-0410-b5e6-96231b3b80d8
Also it extracts getCopyFromRegs helper function in SelectionDAGBuilder as we need to be able to customize type of the register exported from basic block during lowering of the gc.result.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231366 91177308-0d34-0410-b5e6-96231b3b80d8
just arbitrarily interleaving unrelated control flows once they get
moved "out-of-line" (both outside of natural CFG ordering and with
diamonds that cannot be fully laid out by chaining fallthrough edges).
This easy solution doesn't work in practice, and it isn't just a small
bug. It looks like a very different strategy will be required. I'm
working on that now, and it'll again go behind some flag so that
everyone can experiment and make sure it is working well for them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231332 91177308-0d34-0410-b5e6-96231b3b80d8
The target-independent selection algorithm in FastISel already knows how
to select a SINT_TO_FP if the target is SSE but not AVX.
On targets that have SSE but not AVX, the tablegen'd 'fastEmit' functions
for ISD::SINT_TO_FP know how to select instruction X86::CVTSI2SSrr
(for an i32 to f32 conversion) and X86::CVTSI2SDrr (for an i32 to f64
conversion).
This patch simplifies the logic in method X86SelectSIToFP knowing that
the code would not be reachable if the subtarget doesn't have AVX.
No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231243 91177308-0d34-0410-b5e6-96231b3b80d8
a flag for now.
First off, thanks to Daniel Jasper for really pointing out the issue
here. It's been here forever (at least, I think it was there when
I first wrote this code) without getting really noticed or fixed.
The key problem is what happens when two reasonably common patterns
happen at the same time: we outline multiple cold regions of code, and
those regions in turn have diamonds or other CFGs for which we can't
just topologically lay them out. Consider some C code that looks like:
if (a1()) { if (b1()) c1(); else d1(); f1(); }
if (a2()) { if (b2()) c2(); else d2(); f2(); }
done();
Now consider the case where a1() and a2() are unlikely to be true. In
that case, we might lay out the first part of the function like:
a1, a2, done;
And then we will be out of successors in which to build the chain. We go
to find the best block to continue the chain with, which is perfectly
reasonable here, and find "b1" let's say. Laying out successors gets us
to:
a1, a2, done; b1, c1;
At this point, we will refuse to lay out the successor to c1 (f1)
because there are still un-placed predecessors of f1 and we want to try
to preserve the CFG structure. So we go get the next best block, d1.
... wait for it ...
Except that the next best block *isn't* d1. It is b2! d1 is waaay down
inside these conditionals. It is much less important than b2. Except
that this is exactly what we didn't want. If we keep going we get the
entire set of the rest of the CFG *interleaved*!!!
a1, a2, done; b1, c1; b2, c2; d1, f1; d2, f2;
So we clearly need a better strategy here. =] My current favorite
strategy is to actually try to place the block whose predecessor is
closest. This very simply ensures that we unwind these kinds of CFGs the
way that is natural and fitting, and should minimize the number of cache
lines instructions are spread across.
It also happens to be *dead simple*. It's like the datastructure was
specifically set up for this use case or something. We only push blocks
onto the work list when the last predecessor for them is placed into the
chain. So the back of the worklist *is* the nearest next block.
Unfortunately, a change like this is going to cause *soooo* many
benchmarks to swing wildly. So for now I'm adding this under a flag so
that we and others can validate that this is fixing the problems
described, that it seems possible to enable, and hopefully that it fixes
more of our problems long term.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231238 91177308-0d34-0410-b5e6-96231b3b80d8
In a CFG with the edges A->B->C and A->C, B is an optional branch.
LLVM's default behavior is to lay the blocks out naturally, i.e. A, B,
C, in order to improve code locality and fallthroughs. However, if a
function contains many of those optional branches only a few of which
are taken, this leads to a lot of unnecessary icache misses. Moving B
out of line can work around this.
Review: http://reviews.llvm.org/D7719
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231230 91177308-0d34-0410-b5e6-96231b3b80d8
When trying to convert a BUILD_VECTOR into a shuffle, we try to split a single source vector that is twice as wide as the destination vector.
We can not do this when we also need the zero vector to create a blend.
This fixes PR22774.
Differential Revision: http://reviews.llvm.org/D8040
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231219 91177308-0d34-0410-b5e6-96231b3b80d8