make it more consistent with its intended semantics.
The `linker_private_weak_def_auto' linkage type was meant to automatically hide
globals which never had their addresses taken. It has nothing to do with the
`linker_private' linkage type, which outputs the symbols with a `l' (ell) prefix
among other things.
The intended semantic is more like the `linkonce_odr' linkage type.
Change the name of the linkage type to `linkonce_odr_auto_hide'. And therefore
changing the semantics so that it produces the correct output for the linker.
Note: The old linkage name `linker_private_weak_def_auto' will still parse but
is not a synonym for `linkonce_odr_auto_hide'. This should be removed in 4.0.
<rdar://problem/11754934>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162114 91177308-0d34-0410-b5e6-96231b3b80d8
When the command line target options were removed from the LLVM libraries, LTO
lost its ability to specify things like `-disable-fp-elim'. Add this back by
adding the command line variables to the `lto' project.
<rdar://problem/12038729>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161353 91177308-0d34-0410-b5e6-96231b3b80d8
I noticed that SelectionDAGBuilder::visitCall was missing a check for memcmp
in TargetLibraryInfo, so that it would use custom code for memcmp calls even
with -fno-builtin. I also had to add a new -disable-simplify-libcalls option
to llc so that I could write a test for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161262 91177308-0d34-0410-b5e6-96231b3b80d8
(instead of basenames) from DWARF. Use this behavior in llvm-dwarfdump tool.
Reviewed by Benjamin Kramer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160496 91177308-0d34-0410-b5e6-96231b3b80d8
This is still a work in progress but I believe it is currently good enough
to fix PR13122 "Need unit test driver for codegen IR passes". For example,
you can run llc with -stop-after=loop-reduce to have it dump out the IR after
running LSR. Serializing machine-level IR is not yet supported but we have
some patches in progress for that.
The plan is to serialize the IR to a YAML file, containing separate sections
for the LLVM IR, machine-level IR, and whatever other info is needed. Chad
suggested that we stash the stop-after pass in the YAML file and use that
instead of the start-after option to figure out where to restart the
compilation. I think that's a great idea, but since it's not implemented yet
I put the -start-after option into this patch for testing purposes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159570 91177308-0d34-0410-b5e6-96231b3b80d8
1) DIContext is now able to return function name for a given instruction address (besides file/line info).
2) llvm-dwarfdump accepts flag --functions that prints the function name (if address is specified by --address flag).
3) test case that checks the basic functionality of llvm-dwarfdump added
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159512 91177308-0d34-0410-b5e6-96231b3b80d8
include/llvm/Analysis/DebugInfo.h to include/llvm/DebugInfo.h.
The reasoning is because the DebugInfo module is simply an interface to the
debug info MDNodes and has nothing to do with analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159312 91177308-0d34-0410-b5e6-96231b3b80d8
requiring a module. Original patch by Sunay Ismail, simplified by Arnaud
de Grandmaison, then complicated by me (if a triple was specified on the
command line, output help for that triple, not for the default).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159268 91177308-0d34-0410-b5e6-96231b3b80d8
boolean flag to an enum: { Fast, Standard, Strict } (default = Standard).
This option controls the creation by optimizations of fused FP ops that store
intermediate results in higher precision than IEEE allows (E.g. FMAs). The
behavior of this option is intended to match the behaviour specified by a
soon-to-be-introduced frontend flag: '-ffuse-fp-ops'.
Fast mode - allows formation of fused FP ops whenever they're profitable.
Standard mode - allow fusion only for 'blessed' FP ops. At present the only
blessed op is the fmuladd intrinsic. In the future more blessed ops may be
added.
Strict mode - allow fusion only if/when it can be proven that the excess
precision won't effect the result.
Note: This option only controls formation of fused ops by the optimizers. Fused
operations that are explicitly requested (e.g. FMA via the llvm.fma.* intrinsic)
will always be honored, regardless of the value of this option.
Internally TargetOptions::AllowExcessFPPrecision has been replaced by
TargetOptions::AllowFPOpFusion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158956 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds DAG combines to form FMAs from pairs of FADD + FMUL or
FSUB + FMUL. The combines are performed when:
(a) Either
AllowExcessFPPrecision option (-enable-excess-fp-precision for llc)
OR
UnsafeFPMath option (-enable-unsafe-fp-math)
are set, and
(b) TargetLoweringInfo::isFMAFasterThanMulAndAdd(VT) is true for the type of
the FADD/FSUB, and
(c) The FMUL only has one user (the FADD/FSUB).
If your target has fast FMA instructions you can make use of these combines by
overriding TargetLoweringInfo::isFMAFasterThanMulAndAdd(VT) to return true for
types supported by your FMA instruction, and adding patterns to match ISD::FMA
to your FMA instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158757 91177308-0d34-0410-b5e6-96231b3b80d8
TargetLoweringObjectFileELF. Use this to support it on X86. Unlike ARM,
on X86 it is not easy to find out if .init_array should be used or not, so
the decision is made via TargetOptions and defaults to off.
Add a command line option to llc that enables it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158692 91177308-0d34-0410-b5e6-96231b3b80d8
gold to work. Since the enum value LDPO_PIE has just been added to plugin-api.h,
use a numeric constant for now so that we don't require an unreleased
version of gold to build.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158402 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM is now -Wunused-private-field clean except for
- lib/MC/MCDisassembler/Disassembler.h. Not sure why it keeps all those unaccessible fields.
- gtest.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158096 91177308-0d34-0410-b5e6-96231b3b80d8
There are some that I didn't remove this round because they looked like
obvious stubs. There are dead variables in gtest too, they should be
fixed upstream.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158090 91177308-0d34-0410-b5e6-96231b3b80d8
This broke in r144788 when the CodeGenOpt option was moved from everywhere else
(specifically, from addPassesToEmitFile) to createTargetMachine. Since
LTOCodeGenerator wasn't passing the 4th argument, when the 4th parameter became
the 3rd, it silently continued to compile (int->bool conversion) but meant
something completely different.
This change preserves the existing (accidental) and previous (default)
semantics of the addPassesToEmitFile and restores the previous/intended
CodeGenOpt argument by passing it appropriately to createTargetMachine.
(discovered by pending changes to -Wconversion to catch constant->bool
conversions)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157705 91177308-0d34-0410-b5e6-96231b3b80d8
Besides adding the new insertPass function, this patch uses it to
enhance the existing -print-machineinstrs so that the MachineInstrs
after a specific pass can be printed.
Patch by Bin Zeng!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157655 91177308-0d34-0410-b5e6-96231b3b80d8
Use a dedicated MachO load command to annotate data-in-code regions.
This is the same format the linker produces for final executable images,
allowing consistency of representation and use of introspection tools
for both object and executable files.
Data-in-code regions are annotated via ".data_region"/".end_data_region"
directive pairs, with an optional region type.
data_region_directive := ".data_region" { region_type }
region_type := "jt8" | "jt16" | "jt32" | "jta32"
end_data_region_directive := ".end_data_region"
The previous handling of ARM-style "$d.*" labels was broken and has
been removed. Specifically, it didn't handle ARM vs. Thumb mode when
marking the end of the section.
rdar://11459456
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157062 91177308-0d34-0410-b5e6-96231b3b80d8
It's more flexible for MCJIT tasks, in addition it's provides a invalidation instruction cache for code sections which will be used before JIT code will be executed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156933 91177308-0d34-0410-b5e6-96231b3b80d8
options, to enable easier testing of the innards of LLVM that are
enabled by such optimization strategies.
Note that this doesn't provide the (much needed) function attribute
support for -Oz (as opposed to -Os), but still seems like a positive
step to better test the logic that Clang currently relies on.
Patch by Patrik Hägglund.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156913 91177308-0d34-0410-b5e6-96231b3b80d8
Add the MCRegisterInfo to the factories and constructors.
Patch by Tom Stellard <Tom.Stellard@amd.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156828 91177308-0d34-0410-b5e6-96231b3b80d8
My previous change to install llvm-config-host for cross-builds resulted
in that file being installed even when the normal llvm-config was not
installed, e.g., when building the install-clang target. Daniel suggested
this alternative, which solves the immediate problem and also avoids the gunk
in the top-level makefile.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156448 91177308-0d34-0410-b5e6-96231b3b80d8
and expose it as a utility class rather than as free function wrappers.
The simple free-function interface works well for the bugpoint-specific
pass's uses of code extraction, but in an upcoming patch for more
advanced code extraction, they simply don't expose a rich enough
interface. I need to expose various stages of the process of doing the
code extraction and query information to decide whether or not to
actually complete the extraction or give up.
Rather than build up a new predicate model and pass that into these
functions, just take the class that was actually implementing the
functions and lift it up into a proper interface that can be used to
perform code extraction. The interface is cleaned up and re-documented
to work better in a header. It also is now setup to accept the blocks to
be extracted in the constructor rather than in a method.
In passing this essentially reverts my previous commit here exposing
a block-level query for eligibility of extraction. That is no longer
necessary with the more rich interface as clients can query the
extraction object for eligibility directly. This will reduce the number
of walks of the input basic block sequence by quite a bit which is
useful if this enters the normal optimization pipeline.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156163 91177308-0d34-0410-b5e6-96231b3b80d8
While making lld build under the tools directory I decided to refactor how this
works.
There is now a macro, add_llvm_external_project, which takes the name of the
expected subdirectory. This sets up two CMake options.
* LLVM_EXTERNAL_${NAME}_SOURCE_DIR
This is the path to the source. It defaults to
${CMAKE_CURRENT_SOURCE_DIR}/${name}.
* LLVM_EXTERNAL_${NAME}_BUILD
Enable and disable building the tool as part of LLVM.
I chose LLVM_EXTERNAL_${NAME} as a prefix so they all show up together in the
GUI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155654 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-ld is no longer useful and causes confusion and so it is being removed.
* Does not work very well on Windows because it must call a gcc like driver to
assemble and link.
* Has lots of hard coded paths which are wrong on many systems.
* Does not understand most of ld's options.
* Can be partially replaced by llvm-link | opt | {llc | as, llc -filetype=obj} |
ld, or fully replaced by Clang.
I know of no production use of llvm-ld, and hacking use should be
replaced by Clang's driver.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155147 91177308-0d34-0410-b5e6-96231b3b80d8
The test change is to account for the fact that the default disassembler behaviour has changed with regards to specifying the assembly syntax to use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154809 91177308-0d34-0410-b5e6-96231b3b80d8
so we don't want it to show up in the stable 3.1 interface.
While at it, add a comment about why LTOCodeGenerator manually creates the
internalize pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154807 91177308-0d34-0410-b5e6-96231b3b80d8
ConstantFP::get(Type*, double) is unreliably host-specific:
it can't handle a type like PPC128 on an x86 host. It even
has a comment to that effect: "This should only be used for
simple constant values like 2.0/1.0 etc, that are
known-valid both as host double and as the target format."
Instead, use APFloat. While we're at it, randomize the floating
point value more thoroughly; it was previously limited
to the range 0 to 2**19 - 1.
PR12451.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154446 91177308-0d34-0410-b5e6-96231b3b80d8
LangRef.html says:
"There are no arrays, vectors or constants of this type."
This was hitting assertions when passing the -generate-x86-mmx
option.
PR12452.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154445 91177308-0d34-0410-b5e6-96231b3b80d8
optimizations which are valid for position independent code being linked
into a single executable, but not for such code being linked into
a shared library.
I discussed the design of this with Eric Christopher, and the decision
was to support an optional bit rather than a completely separate
relocation model. Fundamentally, this is still PIC relocation, its just
that certain optimizations are only valid under a PIC relocation model
when the resulting code won't be in a shared library. The simplest path
to here is to expose a single bit option in the TargetOptions. If folks
have different/better designs, I'm all ears. =]
I've included the first optimization based upon this: changing TLS
models to the *Exec models when PIE is enabled. This is the LLVM
component of PR12380 and is all of the hard work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
Consider the following program:
$ cat main.c
void foo(void) { }
int main(int argc, char *argv[]) {
foo();
return 0;
}
$ cat bundle.c
extern void foo(void);
void bar(void) {
foo();
}
$ clang -o main main.c
$ clang -o bundle.so bundle.c -bundle -bundle_loader ./main
$ nm -m bundle.so
0000000000000f40 (__TEXT,__text) external _bar
(undefined) external _foo (from executable)
(undefined) external dyld_stub_binder (from libSystem)
$ clang -o main main.c -O4
$ clang -o bundle.so bundle.c -bundle -bundle_loader ./main
Undefined symbols for architecture x86_64:
"_foo", referenced from:
_bar in bundle-elQN6d.o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
The linker was told that the 'foo' in 'main' was 'internal' and had no uses, so
it was dead stripped.
Another situation is something like:
define void @foo() {
ret void
}
define void @bar() {
call asm volatile "call _foo" ...
ret void
}
The only use of 'foo' is inside of an inline ASM call. Since we don't look
inside those for uses of functions, we don't specify this as a "use."
Get around this by not invoking the 'internalize' pass by default. This is an
admitted hack for LTO correctness.
<rdar://problem/11185386>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154124 91177308-0d34-0410-b5e6-96231b3b80d8
reflected in the LLVM IR (as a declare or something), then treat it like a data
object.
N.B. This isn't 100% correct. The ASM parser should supply more information so
that we know what type of object it is, and what attributes it should have.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153870 91177308-0d34-0410-b5e6-96231b3b80d8
definition for it. In that case, we want to wait for the potential definition
before we create a symbol for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153859 91177308-0d34-0410-b5e6-96231b3b80d8
1. The main works will made in the RuntimeDyLdImpl with uses the ObjectFile class. RuntimeDyLdMachO and RuntimeDyLdELF now only parses relocations and resolve it. This is allows to make improvements of the RuntimeDyLd more easily. In addition the support for COFF can be easily added.
2. Added ARM relocations to RuntimeDyLdELF.
3. Added support for stub functions for the ARM, allowing to do a long branch.
4. Added support for external functions that are not loaded from the object files, but can be loaded from external libraries. Now MCJIT can correctly execute the code containing the printf, putc, and etc.
5. The sections emitted instead functions, thanks Jim Grosbach. MemoryManager.startFunctionBody() and MemoryManager.endFunctionBody() have been removed.
6. MCJITMemoryManager.allocateDataSection() and MCJITMemoryManager. allocateCodeSection() used JMM->allocateSpace() instead of JMM->allocateCodeSection() and JMM->allocateDataSection(), because I got an error: "Cannot allocate an allocated block!" with object file contains more than one code or data sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153754 91177308-0d34-0410-b5e6-96231b3b80d8
Module-level ASM may contain definitions of functions and globals. However, we
were not telling the linker that these globals had definitions. As far as it was
concerned, they were just declarations.
Attempt to resolve this by inserting module-level ASM functions and globals into
the '_symbol' set so that the linker will know that they have values.
This gets us further towards our goal of compiling LLVM, but it still has
problems when linking libLTO.dylib because of the `-dead_strip' flag that's
passed to the linker.
<rdar://problem/11124216>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153638 91177308-0d34-0410-b5e6-96231b3b80d8
(and hopefully on Windows). The bots have been down most of the day
because of this, and it's not clear to me what all will be required to
fix it.
The commits started with r153205, then r153207, r153208, and r153221.
The first commit seems to be the real culprit, but I couldn't revert
a smaller number of patches.
When resubmitting, r153207 and r153208 should be folded into r153205,
they were simple build fixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153241 91177308-0d34-0410-b5e6-96231b3b80d8
1) opt is not usually in the same path as the target program. Even for
the bugpoint as a standalone app, it should be more portable to search
in PATH, isn't it?
2) bugpoint driver accounts opt plugins, but does not list them in the
final output command.
Patch by Dmitry Mikushin!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153066 91177308-0d34-0410-b5e6-96231b3b80d8
Also refactor the existing OProfile profiling code to reuse the same interfaces with the VTune profiling code.
In addition, unit tests for the profiling interfaces were added.
This patch was prepared by Andrew Kaylor and Daniel Malea, and reviewed in the llvm-commits list by Jim Grosbach
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152620 91177308-0d34-0410-b5e6-96231b3b80d8
Renamed methods caseBegin, caseEnd and caseDefault with case_begin, case_end, and case_default.
Added some notes relative to case iterators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152532 91177308-0d34-0410-b5e6-96231b3b80d8
* Add enums and structures for GNU version information.
* Implement extraction of that information on a per-symbol basis (ELFObjectFile::getSymbolVersion).
* Implement a generic interface, GetELFSymbolVersion(), for getting the symbol version from the ObjectFile (hides the templating).
* Have llvm-readobj print out the version, when available.
* Add a test for the new feature: readobj-elf-versioning.test
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152436 91177308-0d34-0410-b5e6-96231b3b80d8
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20120130/136146.html
Implemented CaseIterator and it solves almost all described issues: we don't need to mix operand/case/successor indexing anymore. Base iterator class is implemented as a template since it may be initialized either from "const SwitchInst*" or from "SwitchInst*".
ConstCaseIt is just a read-only iterator.
CaseIt is read-write iterator; it allows to change case successor and case value.
Usage of iterator allows totally remove resolveXXXX methods. All indexing convertions done automatically inside the iterator's getters.
Main way of iterator usage looks like this:
SwitchInst *SI = ... // intialize it somehow
for (SwitchInst::CaseIt i = SI->caseBegin(), e = SI->caseEnd(); i != e; ++i) {
BasicBlock *BB = i.getCaseSuccessor();
ConstantInt *V = i.getCaseValue();
// Do something.
}
If you want to convert case number to TerminatorInst successor index, just use getSuccessorIndex iterator's method.
If you want initialize iterator from TerminatorInst successor index, use CaseIt::fromSuccessorIndex(...) method.
There are also related changes in llvm-clients: klee and clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152297 91177308-0d34-0410-b5e6-96231b3b80d8
* Add begin_dynamic_table() / end_dynamic_table() private interface to ELFObjectFile.
* Add begin_libraries_needed() / end_libraries_needed() interface to ObjectFile, for grabbing the list of needed libraries for a shared object or dynamic executable.
* Implement this new interface completely for ELF, leave stubs for COFF and MachO.
* Add 'llvm-readobj' tool for dumping ObjectFile information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151785 91177308-0d34-0410-b5e6-96231b3b80d8
Rename ST_External to ST_Unknown, and slightly change its semantics. It now only indicates that the symbol's type
is unknown, not that the symbol is undefined. (For that, use ST_Undefined).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151696 91177308-0d34-0410-b5e6-96231b3b80d8
Creates a configurable regalloc pipeline.
Ensure specific llc options do what they say and nothing more: -reglloc=... has no effect other than selecting the allocator pass itself. This patch introduces a new umbrella flag, "-optimize-regalloc", to enable/disable the optimizing regalloc "superpass". This allows for example testing coalscing and scheduling under -O0 or vice-versa.
When a CodeGen pass requires the MachineFunction to have a particular property, we need to explicitly define that property so it can be directly queried rather than naming a specific Pass. For example, to check for SSA, use MRI->isSSA, not addRequired<PHIElimination>.
CodeGen transformation passes are never "required" as an analysis
ProcessImplicitDefs does not require LiveVariables.
We have a plan to massively simplify some of the early passes within the regalloc superpass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150226 91177308-0d34-0410-b5e6-96231b3b80d8
This CL delays reading of function bodies from initial parse until
materialization, allowing overlap of compilation with bitcode download.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149918 91177308-0d34-0410-b5e6-96231b3b80d8
but with a critical fix to the SelectionDAG code that optimizes copies
from strings into immediate stores: the previous code was stopping reading
string data at the first nul. Address this by adding a new argument to
llvm::getConstantStringInfo, preserving the behavior before the patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149800 91177308-0d34-0410-b5e6-96231b3b80d8
dylib. This regressed with r145408. I will try to make a test case and add it
so that this doesn't happen again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149667 91177308-0d34-0410-b5e6-96231b3b80d8
The purpose of refactoring is to hide operand roles from SwitchInst user (programmer). If you want to play with operands directly, probably you will need lower level methods than SwitchInst ones (TerminatorInst or may be User). After this patch we can reorganize SwitchInst operands and successors as we want.
What was done:
1. Changed semantics of index inside the getCaseValue method:
getCaseValue(0) means "get first case", not a condition. Use getCondition() if you want to resolve the condition. I propose don't mix SwitchInst case indexing with low level indexing (TI successors indexing, User's operands indexing), since it may be dangerous.
2. By the same reason findCaseValue(ConstantInt*) returns actual number of case value. 0 means first case, not default. If there is no case with given value, ErrorIndex will returned.
3. Added getCaseSuccessor method. I propose to avoid usage of TerminatorInst::getSuccessor if you want to resolve case successor BB. Use getCaseSuccessor instead, since internal SwitchInst organization of operands/successors is hidden and may be changed in any moment.
4. Added resolveSuccessorIndex and resolveCaseIndex. The main purpose of these methods is to see how case successors are really mapped in TerminatorInst.
4.1 "resolveSuccessorIndex" was created if you need to level down from SwitchInst to TerminatorInst. It returns TerminatorInst's successor index for given case successor.
4.2 "resolveCaseIndex" converts low level successors index to case index that curresponds to the given successor.
Note: There are also related compatability fix patches for dragonegg, klee, llvm-gcc-4.0, llvm-gcc-4.2, safecode, clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149481 91177308-0d34-0410-b5e6-96231b3b80d8
This is the initial checkin of the basic-block autovectorization pass along with some supporting vectorization infrastructure.
Special thanks to everyone who helped review this code over the last several months (especially Tobias Grosser).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149468 91177308-0d34-0410-b5e6-96231b3b80d8
