and expose it as a utility class rather than as free function wrappers.
The simple free-function interface works well for the bugpoint-specific
pass's uses of code extraction, but in an upcoming patch for more
advanced code extraction, they simply don't expose a rich enough
interface. I need to expose various stages of the process of doing the
code extraction and query information to decide whether or not to
actually complete the extraction or give up.
Rather than build up a new predicate model and pass that into these
functions, just take the class that was actually implementing the
functions and lift it up into a proper interface that can be used to
perform code extraction. The interface is cleaned up and re-documented
to work better in a header. It also is now setup to accept the blocks to
be extracted in the constructor rather than in a method.
In passing this essentially reverts my previous commit here exposing
a block-level query for eligibility of extraction. That is no longer
necessary with the more rich interface as clients can query the
extraction object for eligibility directly. This will reduce the number
of walks of the input basic block sequence by quite a bit which is
useful if this enters the normal optimization pipeline.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156163 91177308-0d34-0410-b5e6-96231b3b80d8
While making lld build under the tools directory I decided to refactor how this
works.
There is now a macro, add_llvm_external_project, which takes the name of the
expected subdirectory. This sets up two CMake options.
* LLVM_EXTERNAL_${NAME}_SOURCE_DIR
This is the path to the source. It defaults to
${CMAKE_CURRENT_SOURCE_DIR}/${name}.
* LLVM_EXTERNAL_${NAME}_BUILD
Enable and disable building the tool as part of LLVM.
I chose LLVM_EXTERNAL_${NAME} as a prefix so they all show up together in the
GUI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155654 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-ld is no longer useful and causes confusion and so it is being removed.
* Does not work very well on Windows because it must call a gcc like driver to
assemble and link.
* Has lots of hard coded paths which are wrong on many systems.
* Does not understand most of ld's options.
* Can be partially replaced by llvm-link | opt | {llc | as, llc -filetype=obj} |
ld, or fully replaced by Clang.
I know of no production use of llvm-ld, and hacking use should be
replaced by Clang's driver.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155147 91177308-0d34-0410-b5e6-96231b3b80d8
The test change is to account for the fact that the default disassembler behaviour has changed with regards to specifying the assembly syntax to use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154809 91177308-0d34-0410-b5e6-96231b3b80d8
so we don't want it to show up in the stable 3.1 interface.
While at it, add a comment about why LTOCodeGenerator manually creates the
internalize pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154807 91177308-0d34-0410-b5e6-96231b3b80d8
ConstantFP::get(Type*, double) is unreliably host-specific:
it can't handle a type like PPC128 on an x86 host. It even
has a comment to that effect: "This should only be used for
simple constant values like 2.0/1.0 etc, that are
known-valid both as host double and as the target format."
Instead, use APFloat. While we're at it, randomize the floating
point value more thoroughly; it was previously limited
to the range 0 to 2**19 - 1.
PR12451.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154446 91177308-0d34-0410-b5e6-96231b3b80d8
LangRef.html says:
"There are no arrays, vectors or constants of this type."
This was hitting assertions when passing the -generate-x86-mmx
option.
PR12452.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154445 91177308-0d34-0410-b5e6-96231b3b80d8
optimizations which are valid for position independent code being linked
into a single executable, but not for such code being linked into
a shared library.
I discussed the design of this with Eric Christopher, and the decision
was to support an optional bit rather than a completely separate
relocation model. Fundamentally, this is still PIC relocation, its just
that certain optimizations are only valid under a PIC relocation model
when the resulting code won't be in a shared library. The simplest path
to here is to expose a single bit option in the TargetOptions. If folks
have different/better designs, I'm all ears. =]
I've included the first optimization based upon this: changing TLS
models to the *Exec models when PIE is enabled. This is the LLVM
component of PR12380 and is all of the hard work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
Consider the following program:
$ cat main.c
void foo(void) { }
int main(int argc, char *argv[]) {
foo();
return 0;
}
$ cat bundle.c
extern void foo(void);
void bar(void) {
foo();
}
$ clang -o main main.c
$ clang -o bundle.so bundle.c -bundle -bundle_loader ./main
$ nm -m bundle.so
0000000000000f40 (__TEXT,__text) external _bar
(undefined) external _foo (from executable)
(undefined) external dyld_stub_binder (from libSystem)
$ clang -o main main.c -O4
$ clang -o bundle.so bundle.c -bundle -bundle_loader ./main
Undefined symbols for architecture x86_64:
"_foo", referenced from:
_bar in bundle-elQN6d.o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
The linker was told that the 'foo' in 'main' was 'internal' and had no uses, so
it was dead stripped.
Another situation is something like:
define void @foo() {
ret void
}
define void @bar() {
call asm volatile "call _foo" ...
ret void
}
The only use of 'foo' is inside of an inline ASM call. Since we don't look
inside those for uses of functions, we don't specify this as a "use."
Get around this by not invoking the 'internalize' pass by default. This is an
admitted hack for LTO correctness.
<rdar://problem/11185386>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154124 91177308-0d34-0410-b5e6-96231b3b80d8
reflected in the LLVM IR (as a declare or something), then treat it like a data
object.
N.B. This isn't 100% correct. The ASM parser should supply more information so
that we know what type of object it is, and what attributes it should have.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153870 91177308-0d34-0410-b5e6-96231b3b80d8
definition for it. In that case, we want to wait for the potential definition
before we create a symbol for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153859 91177308-0d34-0410-b5e6-96231b3b80d8
1. The main works will made in the RuntimeDyLdImpl with uses the ObjectFile class. RuntimeDyLdMachO and RuntimeDyLdELF now only parses relocations and resolve it. This is allows to make improvements of the RuntimeDyLd more easily. In addition the support for COFF can be easily added.
2. Added ARM relocations to RuntimeDyLdELF.
3. Added support for stub functions for the ARM, allowing to do a long branch.
4. Added support for external functions that are not loaded from the object files, but can be loaded from external libraries. Now MCJIT can correctly execute the code containing the printf, putc, and etc.
5. The sections emitted instead functions, thanks Jim Grosbach. MemoryManager.startFunctionBody() and MemoryManager.endFunctionBody() have been removed.
6. MCJITMemoryManager.allocateDataSection() and MCJITMemoryManager. allocateCodeSection() used JMM->allocateSpace() instead of JMM->allocateCodeSection() and JMM->allocateDataSection(), because I got an error: "Cannot allocate an allocated block!" with object file contains more than one code or data sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153754 91177308-0d34-0410-b5e6-96231b3b80d8
Module-level ASM may contain definitions of functions and globals. However, we
were not telling the linker that these globals had definitions. As far as it was
concerned, they were just declarations.
Attempt to resolve this by inserting module-level ASM functions and globals into
the '_symbol' set so that the linker will know that they have values.
This gets us further towards our goal of compiling LLVM, but it still has
problems when linking libLTO.dylib because of the `-dead_strip' flag that's
passed to the linker.
<rdar://problem/11124216>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153638 91177308-0d34-0410-b5e6-96231b3b80d8
(and hopefully on Windows). The bots have been down most of the day
because of this, and it's not clear to me what all will be required to
fix it.
The commits started with r153205, then r153207, r153208, and r153221.
The first commit seems to be the real culprit, but I couldn't revert
a smaller number of patches.
When resubmitting, r153207 and r153208 should be folded into r153205,
they were simple build fixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153241 91177308-0d34-0410-b5e6-96231b3b80d8
1) opt is not usually in the same path as the target program. Even for
the bugpoint as a standalone app, it should be more portable to search
in PATH, isn't it?
2) bugpoint driver accounts opt plugins, but does not list them in the
final output command.
Patch by Dmitry Mikushin!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153066 91177308-0d34-0410-b5e6-96231b3b80d8
Also refactor the existing OProfile profiling code to reuse the same interfaces with the VTune profiling code.
In addition, unit tests for the profiling interfaces were added.
This patch was prepared by Andrew Kaylor and Daniel Malea, and reviewed in the llvm-commits list by Jim Grosbach
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152620 91177308-0d34-0410-b5e6-96231b3b80d8
Renamed methods caseBegin, caseEnd and caseDefault with case_begin, case_end, and case_default.
Added some notes relative to case iterators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152532 91177308-0d34-0410-b5e6-96231b3b80d8
* Add enums and structures for GNU version information.
* Implement extraction of that information on a per-symbol basis (ELFObjectFile::getSymbolVersion).
* Implement a generic interface, GetELFSymbolVersion(), for getting the symbol version from the ObjectFile (hides the templating).
* Have llvm-readobj print out the version, when available.
* Add a test for the new feature: readobj-elf-versioning.test
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152436 91177308-0d34-0410-b5e6-96231b3b80d8
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20120130/136146.html
Implemented CaseIterator and it solves almost all described issues: we don't need to mix operand/case/successor indexing anymore. Base iterator class is implemented as a template since it may be initialized either from "const SwitchInst*" or from "SwitchInst*".
ConstCaseIt is just a read-only iterator.
CaseIt is read-write iterator; it allows to change case successor and case value.
Usage of iterator allows totally remove resolveXXXX methods. All indexing convertions done automatically inside the iterator's getters.
Main way of iterator usage looks like this:
SwitchInst *SI = ... // intialize it somehow
for (SwitchInst::CaseIt i = SI->caseBegin(), e = SI->caseEnd(); i != e; ++i) {
BasicBlock *BB = i.getCaseSuccessor();
ConstantInt *V = i.getCaseValue();
// Do something.
}
If you want to convert case number to TerminatorInst successor index, just use getSuccessorIndex iterator's method.
If you want initialize iterator from TerminatorInst successor index, use CaseIt::fromSuccessorIndex(...) method.
There are also related changes in llvm-clients: klee and clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152297 91177308-0d34-0410-b5e6-96231b3b80d8
* Add begin_dynamic_table() / end_dynamic_table() private interface to ELFObjectFile.
* Add begin_libraries_needed() / end_libraries_needed() interface to ObjectFile, for grabbing the list of needed libraries for a shared object or dynamic executable.
* Implement this new interface completely for ELF, leave stubs for COFF and MachO.
* Add 'llvm-readobj' tool for dumping ObjectFile information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151785 91177308-0d34-0410-b5e6-96231b3b80d8
Rename ST_External to ST_Unknown, and slightly change its semantics. It now only indicates that the symbol's type
is unknown, not that the symbol is undefined. (For that, use ST_Undefined).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151696 91177308-0d34-0410-b5e6-96231b3b80d8
Creates a configurable regalloc pipeline.
Ensure specific llc options do what they say and nothing more: -reglloc=... has no effect other than selecting the allocator pass itself. This patch introduces a new umbrella flag, "-optimize-regalloc", to enable/disable the optimizing regalloc "superpass". This allows for example testing coalscing and scheduling under -O0 or vice-versa.
When a CodeGen pass requires the MachineFunction to have a particular property, we need to explicitly define that property so it can be directly queried rather than naming a specific Pass. For example, to check for SSA, use MRI->isSSA, not addRequired<PHIElimination>.
CodeGen transformation passes are never "required" as an analysis
ProcessImplicitDefs does not require LiveVariables.
We have a plan to massively simplify some of the early passes within the regalloc superpass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150226 91177308-0d34-0410-b5e6-96231b3b80d8
This CL delays reading of function bodies from initial parse until
materialization, allowing overlap of compilation with bitcode download.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149918 91177308-0d34-0410-b5e6-96231b3b80d8
but with a critical fix to the SelectionDAG code that optimizes copies
from strings into immediate stores: the previous code was stopping reading
string data at the first nul. Address this by adding a new argument to
llvm::getConstantStringInfo, preserving the behavior before the patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149800 91177308-0d34-0410-b5e6-96231b3b80d8
dylib. This regressed with r145408. I will try to make a test case and add it
so that this doesn't happen again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149667 91177308-0d34-0410-b5e6-96231b3b80d8
The purpose of refactoring is to hide operand roles from SwitchInst user (programmer). If you want to play with operands directly, probably you will need lower level methods than SwitchInst ones (TerminatorInst or may be User). After this patch we can reorganize SwitchInst operands and successors as we want.
What was done:
1. Changed semantics of index inside the getCaseValue method:
getCaseValue(0) means "get first case", not a condition. Use getCondition() if you want to resolve the condition. I propose don't mix SwitchInst case indexing with low level indexing (TI successors indexing, User's operands indexing), since it may be dangerous.
2. By the same reason findCaseValue(ConstantInt*) returns actual number of case value. 0 means first case, not default. If there is no case with given value, ErrorIndex will returned.
3. Added getCaseSuccessor method. I propose to avoid usage of TerminatorInst::getSuccessor if you want to resolve case successor BB. Use getCaseSuccessor instead, since internal SwitchInst organization of operands/successors is hidden and may be changed in any moment.
4. Added resolveSuccessorIndex and resolveCaseIndex. The main purpose of these methods is to see how case successors are really mapped in TerminatorInst.
4.1 "resolveSuccessorIndex" was created if you need to level down from SwitchInst to TerminatorInst. It returns TerminatorInst's successor index for given case successor.
4.2 "resolveCaseIndex" converts low level successors index to case index that curresponds to the given successor.
Note: There are also related compatability fix patches for dragonegg, klee, llvm-gcc-4.0, llvm-gcc-4.2, safecode, clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149481 91177308-0d34-0410-b5e6-96231b3b80d8
This is the initial checkin of the basic-block autovectorization pass along with some supporting vectorization infrastructure.
Special thanks to everyone who helped review this code over the last several months (especially Tobias Grosser).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149468 91177308-0d34-0410-b5e6-96231b3b80d8
Move to a by-section allocation and relocation scheme. This allows
better support for sections which do not contain externally visible
symbols.
Flesh out the relocation address vs. local storage address separation a
bit more as well. Remote process JITs use this to tell the relocation
resolution code where the code will live when it executes.
The startFunctionBody/endFunctionBody interfaces to the JIT and the
memory manager are deprecated. They'll stick around for as long as the
old JIT does, but the MCJIT doesn't use them anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148258 91177308-0d34-0410-b5e6-96231b3b80d8
Previously let the JITEmitter do it. That's rather odd, and doesn't play nice
with the MCJIT, so move the (trivial) logic up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147967 91177308-0d34-0410-b5e6-96231b3b80d8
file error checking. Use that to error on an unfinished cfi_startproc.
The error is not nice, but is already better than a segmentation fault.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147717 91177308-0d34-0410-b5e6-96231b3b80d8
properly initializing the target infos. I decided it wasn't worth linking them
in for this, so just switched back to using the Makefile variable for now. We
can reconsider later if we ever get pluggable targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146711 91177308-0d34-0410-b5e6-96231b3b80d8
subdirectories to traverse into.
- Originally I wanted to avoid this and just autoscan, but this has one key
flaw in that new subdirectories can not automatically trigger a rerun of the
llvm-build tool. This is particularly a pain when switching back and forth
between trees where one has added a subdirectory, as the dependencies will
tend to be wrong. This will also eliminates FIXME implicitly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146436 91177308-0d34-0410-b5e6-96231b3b80d8
generates the dwarf Compile Unit DIE and a dwarf subprogram DIE for each
non-temporary label.
The next part will be to get the clang driver to enable this when assembling
a .s file. rdar://9275556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146262 91177308-0d34-0410-b5e6-96231b3b80d8
change, now you need a TargetOptions object to create a TargetMachine. Clang
patch to follow.
One small functionality change in PTX. PTX had commented out the machine
verifier parts in their copy of printAndVerify. That now calls the version in
LLVMTargetMachine. Users of PTX who need verification disabled should rely on
not passing the command-line flag to enable it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145714 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message:
llvm-config: Replace with C++ version (was llvm-config-2).
- Reapply of r144300, with lots of fixes/migration easement in between.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145582 91177308-0d34-0410-b5e6-96231b3b80d8
to the way we currently expect target selection to work -- clients are supposed
to have control over what targets are available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145331 91177308-0d34-0410-b5e6-96231b3b80d8
and code model. This eliminates the need to pass OptLevel flag all over the
place and makes it possible for any codegen pass to use this information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144788 91177308-0d34-0410-b5e6-96231b3b80d8
This will break users of the LLVMCreateDisasm API (not that I know of any). They have to call the
LLVMInitializeAll* functions from llvm-c/Target.h themselves now. edis' C API in all its horribleness
should be unaffected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144385 91177308-0d34-0410-b5e6-96231b3b80d8
- Also, fix a refacto that left extra "all" component in list (this is now
defined in the groups explicitly)
- Reapply of r143879 now that Make should see needed deps.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144201 91177308-0d34-0410-b5e6-96231b3b80d8
- Also, fix a refacto that left extra "all" component in list (this is now
defined in the groups explicitly)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143879 91177308-0d34-0410-b5e6-96231b3b80d8
- Still doesn't use actual generated component table, but that is now just a matter of wiring into the build system.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143617 91177308-0d34-0410-b5e6-96231b3b80d8
for now).
- Mostly complete except for the data that needs to come from the build system
or the dependencies.
- Has some small improvements from current llvm-config:
o Uses TargetRegistry directly to get some information.
o Designed to work correctly when used from a CMake build tree (relatively
untested currently) (although pcc fixed this recently for old llvm-config).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143616 91177308-0d34-0410-b5e6-96231b3b80d8
to force it to build after all library targets so it has complete
dependency information. This should fix broken 'make install' with
CMake.
This is a partial revert of r143540, but it doesn't revert the most
important part of that change: removing the dependency edge from LLVM
tools to the llvm-config script.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143548 91177308-0d34-0410-b5e6-96231b3b80d8
-g flag. In this part we generate the .file for the source being assembled and
the .loc's for the assembled instructions.
The next part will be to generate the dwarf Compile Unit DIE and a dwarf
subprogram DIE for each non-temporary label.
Once the next part is done test cases will be added. rdar://9275556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143509 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, if invoked from a CMake build directory, 'llvm-config
--cppflags' and friends would only print a -I flag for the build
directory's header search path, because it would assume that it was
already installed, not recognising its parent directory as being the
build directory. Teach llvm-config about CMake build directories
so that it prints a -I for both the source and build directory's
search paths.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143171 91177308-0d34-0410-b5e6-96231b3b80d8
.file filenumber "directory" "filename"
This removes one join+split of the directory+filename in MC internals. Because
bitcode files have independent fields for directory and filenames in debug info,
this patch may change the .o files written by existing .bc files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142300 91177308-0d34-0410-b5e6-96231b3b80d8
the X86 asmparser to produce ranges in the one case that was annoying me, for example:
test.s:10:15: error: invalid operand for instruction
movl 0(%rax), 0(%edx)
^~~~~~~
It should be straight-forward to enhance filecheck, tblgen, and/or the .ll parser to use
ranges where appropriate if someone is interested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142106 91177308-0d34-0410-b5e6-96231b3b80d8
