This patch moves the jump address materialization inside the noop slide. This
enables patching of the materialization itself or its complete removal. This
patch also adds the ability to define scratch registers that can be used safely
by the code called from the patchpoint intrinsic. At least one scratch register
is required, because that one is used for the materialization of the jump
address. This patch depends on D2009.
Differential Revision: http://llvm-reviews.chandlerc.com/D2074
Reviewed by Andy
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194306 91177308-0d34-0410-b5e6-96231b3b80d8
The new graph structure replaces the node and edge linked lists with vectors.
Free lists (well, free vectors) are used for fast insertion/deletion.
The ultimate aim is to make PBQP graphs cheap to clone. The motivation is that
the PBQP solver destructively consumes input graphs while computing a solution,
forcing the graph to be fully reconstructed for each round of PBQP. This
imposes a high cost on large functions, which often require several rounds of
solving/spilling to find a final register allocation. If we can cheaply clone
the PBQP graph and incrementally update it between rounds then hopefully we can
reduce this cost. Further, once we begin pooling matrix/vector values (future
work), we can cache some PBQP solver metadata and share it between cloned
graphs, allowing the PBQP solver to re-use some of the computation done in
earlier rounds.
For now this is just a data structure update. The allocator and solver still
use the graph the same way as before, fully reconstructing it between each
round. I expect no material change from this update, although it may change
the iteration order of the nodes, causing ties in the solver to break in
different directions, and this could perturb the generated allocations
(hopefully in a completely benign way).
Thanks very much to Arnaud Allard de Grandmaison for encouraging me to get back
to work on this, and for a lot of discussion and many useful PBQP test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194300 91177308-0d34-0410-b5e6-96231b3b80d8
The idea of the AnyReg Calling Convention is to provide the call arguments in
registers, but not to force them to be placed in a paticular order into a
specified set of registers. Instead it is up tp the register allocator to assign
any register as it sees fit. The same applies to the return value (if
applicable).
Differential Revision: http://llvm-reviews.chandlerc.com/D2009
Reviewed by Andy
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194293 91177308-0d34-0410-b5e6-96231b3b80d8
Based on discussions with Lang Hames and Jakob Stoklund Olesen at the hacker's lab, and in the light of upcoming work on the PBQP register allocator, it was though that CalcSpillWeights does not need to be a pass. This change will enable to customize / tune the spill weight computation depending on the allocator.
Update the documentation style while there.
No functionnal change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194269 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Michele Scandale!
Rewrite of the functions used to compute the backedge taken count of a
loop on LT and GT comparisons.
I decided to split the handling of LT and GT cases becasue the trick
"a > b == -a < -b" in some cases prevents the trip count computation
due to the multiplication by -1 on the two operands of the
comparison. This issue comes from the conservative computation of
value range of SCEVs: taking the negative SCEV of an expression that
have a small positive range (e.g. [0,31]), we would have a SCEV with a
fullset as value range.
Indeed, in the new rewritten function I tried to better handle the
maximum backedge taken count computation when MAX/MIN expression are
used to handle the cases where no entry guard is found.
Some test have been modified in order to check the new value correctly
(I manually check them and reasoning on possible overflow the new
values seem correct).
I finally added a new test case related to the multiplication by -1
issue on GT comparisons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194116 91177308-0d34-0410-b5e6-96231b3b80d8
One of the uses of the IsValid flag is to support default constructing
a ErrorOr that is not a Error or a Value. There is not much value in
doing that IMHO. If ErrorOr was to have a default constructor, it
should be implemented by default constructing the value, but even that
looks unnecessary.
The other use is to avoid calling destructors on moved objects. This
looks wrong. If the data being moved has non trivial treatment of
moves (an std::vector for example), it is its destructor that should
handle it, not ~ErrorOr.
With this change ErrorOr becomes a fairly simple wrapper and should
always be better than using an error_code + value in an API.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194109 91177308-0d34-0410-b5e6-96231b3b80d8
These were incorrectly pointing to HAVE_LOG despite being checked for
correctly in config-ix.cmake.
Patch by James Lyon!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194051 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables llvm-cov to correctly output the run count stored in
the GCDA file. GCOVProfiling currently does not generate this
information, so the GCDA run data had to be hacked on from a GCDA file
generated by gcc. This is corrected by a subsequent patch.
With the run and program data included, both llvm-cov and gcov produced
the same output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194033 91177308-0d34-0410-b5e6-96231b3b80d8
ErrorOr had quiet a bit of complexity and indirection to be able to hold a user
type with the error.
That feature is not used anymore. This patch removes it, it will live in svn
history if we ever need it again.
If we do need it again, IMHO there is one thing that should be done
differently: Holding extra info in the error is not a property a function also
returning a value or not. The ability to hold extra info should be in the error
type and ErrorOr templated over it so that we don't need the funny looking
ErrorOr<void>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194030 91177308-0d34-0410-b5e6-96231b3b80d8
As with the other loop unrolling parameters (the unrolling threshold, partial
unrolling, etc.) runtime unrolling can now also be controlled via the
constructor. This will be necessary for moving non-trivial unrolling late in
the pass manager (after loop vectorization).
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194027 91177308-0d34-0410-b5e6-96231b3b80d8
stack traces by default if you use PrettyStackTraceProgram, so that existing LLVM-based
tools will continue to get it without any changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193971 91177308-0d34-0410-b5e6-96231b3b80d8
This adds an SimplifyLibCalls case which converts the special __sinpi and
__cospi (float & double variants) into a __sincospi_stret where appropriate to
remove duplicated work.
Patch by Tim Northover
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193943 91177308-0d34-0410-b5e6-96231b3b80d8
linkonce_odr_auto_hide was in incomplete attempt to implement a way
for the linker to hide symbols that are known to be available in every
TU and whose addresses are not relevant for a particular DSO.
It was redundant in that it all its uses are equivalent to
linkonce_odr+unnamed_addr. Unlike those, it has never been connected
to clang or llvm's optimizers, so it was effectively dead.
Given that nothing produces it, this patch just nukes it
(other than the llvm-c enum value).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193865 91177308-0d34-0410-b5e6-96231b3b80d8
Objective-C data structures.
This is allows tools such as darwin's otool(1) that uses the
LLVM disassembler take a pointer value being loaded by
an instruction and add a comment to what it is being referenced
to make following disassembly of Objective-C programs
more readable.
For example disassembling the Mac OS X TextEdit app one
will see comments like the following:
movq 0x20684(%rip), %rsi ## Objc selector ref: standardUserDefaults
movq 0x21985(%rip), %rdi ## Objc class ref: _OBJC_CLASS_$_NSUserDefaults
movq 0x1d156(%rip), %r14 ## Objc message: +[NSUserDefaults standardUserDefaults]
leaq 0x23615(%rip), %rdx ## Objc cfstring ref: @"SelectLinePanel"
callq 0x10001386c ## Objc message: -[[%rdi super] initWithWindowNibName:]
These diffs also include putting quotes around C strings
in literal pools and uses "symbol address" in the comment
when adding a symbol name to the comment to tell these
types of references apart:
leaq 0x4f(%rip), %rax ## literal pool for: "Hello world"
movq 0x1c3ea(%rip), %rax ## literal pool symbol address: ___stack_chk_guard
Of course the easy changes are in the LLVM disassembler and
the hard work is up to the implementer of the SymbolLookUp()
call back.
rdar://10602439
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193833 91177308-0d34-0410-b5e6-96231b3b80d8
There are two ways one could implement hiding of linkonce_odr symbols in LTO:
* LLVM tells the linker which symbols can be hidden if not used from native
files.
* The linker tells LLVM which symbols are not used from other object files,
but will be put in the dso symbol table if present.
GOLD's API is the second option. It was implemented almost 1:1 in llvm by
passing the list down to internalize.
LLVM already had partial support for the first option. It is also very similar
to how ld64 handles hiding these symbols when *not* doing LTO.
This patch then
* removes the APIs for the DSO list.
* marks LTO_SYMBOL_SCOPE_DEFAULT_CAN_BE_HIDDEN all linkonce_odr unnamed_addr
global values and other linkonce_odr whose address is not used.
* makes the gold plugin responsible for handling the API mismatch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193800 91177308-0d34-0410-b5e6-96231b3b80d8
