A node's ordering is only propagated during legalization if (a) the new node does
not have an ordering (is not a CSE'd node), or (b) the new node has an ordering
that is higher than the node being legalized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177465 91177308-0d34-0410-b5e6-96231b3b80d8
The always-true "(int)Int == (signed)Int" comparison was found
while experimenting with a potential new Clang warning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177290 91177308-0d34-0410-b5e6-96231b3b80d8
The linker sorts the .tls$<xyz> sections by name, and we need
to make sure any extra sections we produce (e.g. for weak globals)
always end up between .tls$AAA and .tls$ZZZ, even if the name
starts with e.g. an underscore.
Patch by David Nadlinger!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177256 91177308-0d34-0410-b5e6-96231b3b80d8
Implicit defs are not currently positional and not modeled by the
per-operand machine model. Unfortunately, we treat defs that are part
of the architectural instruction description, like flags, the same as
other implicit defs. Really, they should have a fixed MachineInstr
layout and probably shouldn't be "implicit" at all.
For now, we'll change the default latency to be the max operand
latency. That will give flag setting operands full latency for x86
folded loads. Other kinds of "fake" implicit defs don't occur prior to
regalloc anyway, and we would like them to go away postRegAlloc as
well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177227 91177308-0d34-0410-b5e6-96231b3b80d8
This is a generic function (derived from PEI); moving it into
MachineFrameInfo eliminates a current redundancy between the ARM and AArch64
backends, and will allow it to be used by the PowerPC target code.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177111 91177308-0d34-0410-b5e6-96231b3b80d8
Add the current PEI register scavenger as a parameter to the
processFunctionBeforeFrameFinalized callback.
This change is necessary in order to allow the PowerPC target code to
set the register scavenger frame index after the save-area offset
adjustments performed by processFunctionBeforeFrameFinalized. Only
after these adjustments have been made is it possible to estimate
the size of the stack frame.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177108 91177308-0d34-0410-b5e6-96231b3b80d8
This doesn't reset all of the target options within the TargetOptions
object. This is because some of those are ABI-specific and must be determined if
it's okay to change those on the fly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176986 91177308-0d34-0410-b5e6-96231b3b80d8
belongs to a different compile unit.
DW_FORM_ref_addr should be used for cross compile-unit reference.
When compiling a large application, we got a dwarfdump verification error where
abstract_origin points to nowhere.
This error can't be reproduced on any testing case in MultiSource.
We may have other cases where we use DW_FORM_ref4 unconditionally.
rdar://problem/13370501
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176882 91177308-0d34-0410-b5e6-96231b3b80d8
Versioned debug info support has been a burden to maintain & also compromised
current debug info verification by causing test cases testing old debug info to
remain rather than being updated to the latest. It also makes it hard to add or
change the metadata schema by requiring various backwards-compatibility in the
DI* hierarchy.
So it's being removed in preparation for new changes to the schema to tidy up
old/unnecessary fields and add new fields needed for new debug info (well, new
to LLVM at least).
The more surprising part of this is the changes to DI*::Verify - this became
necessary due to the changes to AsmWriter. AsmWriter was relying on the version
test to decide which bits of metadata were actually debug info when printing
the comment annotations. Without the version information the tag numbers were
too common & it would print debug info on random metadata that happened to
start with an integer that matched a tag number. Instead this change makes the
Verify functions more precise (just adding "number of operands" checks - not
type checking those operands yet) & relies on that to decide which metadata is
debug info metadata.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176838 91177308-0d34-0410-b5e6-96231b3b80d8
PHIs are allowed to have multiple operand pairs per predecessor, and
this code works just fine when it happens.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176734 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176733 91177308-0d34-0410-b5e6-96231b3b80d8
To find the last use of a register unit, start from the bottom and scan
upwards until a user is found.
<rdar://problem/13353090>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176706 91177308-0d34-0410-b5e6-96231b3b80d8
LegalizeDAG.cpp uses the value of the comparison operands when checking
the legality of BR_CC, so DAGCombiner should do the same.
v2:
- Expand more BR_CC value types for NVPTX
v3:
- Expand correct BR_CC value types for Hexagon, Mips, and XCore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176694 91177308-0d34-0410-b5e6-96231b3b80d8
This verifies live intervals both before and after scheduling. It's
useful for anyone hacking on live interval update.
Note that we don't yet pass verification all the time. We don't yet
handle updating nonallocatable live intervals perfectly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176685 91177308-0d34-0410-b5e6-96231b3b80d8
Code generation makes some basic assumptions about the IR it's been given. In
particular, if there is only one 'invoke' in the function, then that invoke
won't be going away. However, with the advent of the `llvm.donothing' intrinsic,
those invokes may go away. If all of them go away, the landing pad no longer has
any users. This confuses the back-end, which asserts.
This happens with SjLj exceptions, because that's the model that modifies the IR
based on there being invokes, etc. in the function.
Remove any invokes of `llvm.donothing' during SjLj EH preparation. This will
give us a CFG that the back-end won't be confused about. If all of the invokes
in a function are removed, then the SjLj EH prepare pass won't insert the bogus
code the relies upon the invokes being there.
<rdar://problem/13228754&13316637>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176677 91177308-0d34-0410-b5e6-96231b3b80d8
In very rare cases caused by irreducible control flow, the dominating
block can have the same trace head without actually being part of the
trace.
As long as such a dominator still has valid instruction depths, it is OK
to use it for computing instruction depths.
Rename the function to avoid lying, and add a check that instruction
depths are computed for the dominator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176668 91177308-0d34-0410-b5e6-96231b3b80d8
rdar:13370002 [pre-RA-sched] assertion: released too many times
I tracked this down to an earlier hack that is no longer applicable
and interfered with normal scheduler logic. With the changes in
r176037, it was causing an instruction to be scheduled multiple times.
I have an external test case that I tried hard to reduce and
failed. I can't even reproduce with llc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176636 91177308-0d34-0410-b5e6-96231b3b80d8
We now emit a line table for each compile unit. To reduce the prologue size
of each line table, the files and directories used by each compile unit are
stored in std::map<unsigned, std::vector< > > instead of std::vector< >.
The prologue for a lto'ed image can be as big as 93K. Duplicating 93K for each
compile unit causes a huge increase of debug info. With this patch, each
prologue will only emit the files required by the compile unit.
rdar://problem/13342023
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176605 91177308-0d34-0410-b5e6-96231b3b80d8
- ISD::SHL/SRL/SRA must have either both scalar or both vector operands
but TLI.getShiftAmountTy() so far only return scalar type. As a
result, backend logic assuming that breaks.
- Rename the original TLI.getShiftAmountTy() to
TLI.getScalarShiftAmountTy() and re-define TLI.getShiftAmountTy() to
return target-specificed scalar type or the same vector type as the
1st operand.
- Fix most TICG logic assuming TLI.getShiftAmountTy() a simple scalar
type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176364 91177308-0d34-0410-b5e6-96231b3b80d8
We avoided computing DAG height/depth during Node printing because it
shouldn't depend on an otherwise valid DAG. But this has become far
too annoying for the common case of a valid DAG where we want to see
valid values. If doing the computation on-the-fly turns out to be a
problem in practice, then I'll add a mode to the diagnostics to only
force it when we're likely to have a valid DAG, otherwise explicitly
print INVALID instead of bogus numbers. For now, just go for it all
the time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176314 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAGIsel::LowerArguments needs a function, not a basic block. So it
makes sense to pass it the function instead of extracting a basic-block from
the function and then tossing it. This is also more self-documenting (functions
have arguments, BBs don't).
In addition, added comments to a couple of Select* methods.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176305 91177308-0d34-0410-b5e6-96231b3b80d8
We make the cost for calling libm functions extremely high as emitting the
calls is expensive and causes spills (on x86) so performance suffers. We still
vectorize important calls like ceilf and friends on SSE4.1. and fabs.
Differential Revision: http://llvm-reviews.chandlerc.com/D466
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176287 91177308-0d34-0410-b5e6-96231b3b80d8
definition DIE (TAG_variable), and put AT_MIPS_linkage_name to TAG_member when
DarwinGDBCompat is true.
Darwin GDB needs AT_MIPS_linkage_name at both places to work.
Follow-up patch to r176143.
rdar://problem/13291234
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176220 91177308-0d34-0410-b5e6-96231b3b80d8
