domtree. When finding a nearest common dominator, if neither A dominates
B nor B dominates A, we immediately resorted to a tree walk. The tree
walk here is *particularly* expensive because we have to build
a (potentially very large) set for one side's dominators and compare it
with the other side's.
If at any point we have DFS info, we don't need to do any of this. We
can just walk up one side's immediate dominators and return the first
one which dominates the other side. Because of the DFS info, the
dominates queries are trivially constant time.
This reduces the optimizers time in the test case on PR19499 by 70%. It
now optimizes in about 30 seconds for me. And there is still more to be
done for this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207406 91177308-0d34-0410-b5e6-96231b3b80d8
GCOV provides an option to prepend output file names with the source
file name, to disambiguate between covered data that's included from
multiple sources. Add a flag to llvm-cov that does the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207035 91177308-0d34-0410-b5e6-96231b3b80d8
For now it contains a single flag, SanitizeAddress, which enables
AddressSanitizer instrumentation of inline assembly.
Patch by Yuri Gorshenin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206971 91177308-0d34-0410-b5e6-96231b3b80d8
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206822 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the on-disk hash to get the type to use for offsets from
the Info type, so that clients can be more flexible with the size of
table they support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206643 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the on-disk hash to get the size of a hash value from the
Info type, so that clients can be more flexible with the types of hash
they use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206642 91177308-0d34-0410-b5e6-96231b3b80d8
implementation of the SpecificBumpPtrAllocator -- we have to actually
move the subobject. =] Noticed when using this code more directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206582 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces clang's Basic/OnDiskHashTable.h into llvm as
Support/OnDiskHashTable.h. I've taken the opportunity to add doxygen
comments and run the file through clang-format, but other than the
namespace changing from clang:: to llvm:: the API is identical.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206438 91177308-0d34-0410-b5e6-96231b3b80d8
This is so that EF_MIPS_NAN2008 is set if we are using IEEE 754-2008
NaN encoding (-mnan=2008). This patch also adds support for parsing
'.nan legacy' and '.nan 2008' assembly directives. The handling of
these directives should match GAS' behaviour i.e., the last directive
in use sets the ELF header bit (EF_MIPS_NAN2008).
Differential Revision: http://reviews.llvm.org/D3346
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206396 91177308-0d34-0410-b5e6-96231b3b80d8
a default argument. The allocator interface we're modeling doesn't
distinguish between array and non-array allocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206327 91177308-0d34-0410-b5e6-96231b3b80d8
because there is another (size_t, size_t) overload of Allocator, and the
only distinguishing factor is that one is a tempalte and the other
isn't. There was only one usage of this and that one was easily
converted to carry the alignment constraint in the type itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206325 91177308-0d34-0410-b5e6-96231b3b80d8
by removing the MallocSlabAllocator entirely and just using
MallocAllocator directly. This makes all off these allocators expose and
utilize the same core interface.
The only ugly part of this is that it exposes the fact that the JIT
allocator has no real handling of alignment, any more than the malloc
allocator does. =/ It would be nice to fix both of these to support
alignments, and then to leverage that in the BumpPtrAllocator to do less
over allocation in order to manually align pointers. But, that's another
patch for another day. This patch has no functional impact, it just
removes the somewhat meaningless wrapper around MallocAllocator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206267 91177308-0d34-0410-b5e6-96231b3b80d8
allocation libraries, may allow more efficient allocation and
deallocation. It at least makes the interface implementable by the JIT
memory manager.
However, this highlights problematic overloading between the void* and
the T* deallocation functions. I'm looking into a better way to do this,
but as it happens, it comes up rarely in the codebase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206265 91177308-0d34-0410-b5e6-96231b3b80d8
overloads. This doesn't matter *that* much yet, but it will in
a subsequent patch. I had tested the original pattern, but not my
attempt to pacify MSVC. This at least appears to work. Still fixing the
rest of the fallout in the final patch that uses these overloads, but it
will follow shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206259 91177308-0d34-0410-b5e6-96231b3b80d8
'sizeof(T)' for T == void and produces a hard error. I cannot fathom why
this is OK. Oh well. switch to an explicit test for being the
(potentially qualified) void type, which is the only specific case I was
worried about. Hopefully this survives the libstdc++ build bots which
have limited type traits implementations...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206256 91177308-0d34-0410-b5e6-96231b3b80d8
to types which we can compute the size of. The comparison with zero
isn't actually interesting here, it's mostly about putting sizeof into
a sfinae context.
This is particular important for Deallocate as otherwise the void*
overload can quickly become ambiguous.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206251 91177308-0d34-0410-b5e6-96231b3b80d8
This patch re-introduces the MCContext member that was removed from
MCDisassembler in r206063, and requires that an MCContext be passed in at
MCDisassembler construction time. (Previously the MCContext member had been
initialized in an ad-hoc fashion after construction). The MCCContext member
can be used by MCDisassembler sub-classes to construct constant or
target-specific MCExprs.
This patch updates disassemblers for in-tree targets, and provides the
MCRegisterInfo instance that some disassemblers were using through the
MCContext (previously those backends were constructing their own
MCRegisterInfo instances).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206241 91177308-0d34-0410-b5e6-96231b3b80d8
along with templated overloads much like we have for Allocate. These
will facilitate switching the Deallocate interface of all the Allocator
classes to accept the size by pre-filling it from the type size where we
can do so. I plan to convert several uses to the template variants in
subsequent patches prior to adding the Size parameter.
No functionality changed, WIP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206230 91177308-0d34-0410-b5e6-96231b3b80d8
rather than defining them (differently!) in both allocators. This also
serves as a basis for documenting and even enforcing some of the
LLVM-style "allocator" concept methods which must exist with various
signatures.
I plan on extending and changing the signatures of these to further
simplify our allocator model in subsequent commits, so I wanted to
factor things as best as I could first. Notably, I'm working to add the
'Size' to the deallocation method of all allocators. This has several
implications not the least of which are faster deallocation times on
certain allocation libraries (tcmalloc). It also will allow the JIT
allocator to fully model the existing allocation interfaces and allow
sanitizer poisoning of deallocated regions. The list of advantages goes
on. =] But by factoring things first I'll be able to make this easier by
first introducing template helpers for the deallocation path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206225 91177308-0d34-0410-b5e6-96231b3b80d8
small formatting inconsistencies with the rest of LLVM and even this
file. I looked at all the changes and they seemed like just better
formatting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206209 91177308-0d34-0410-b5e6-96231b3b80d8
declaration. GCC 4.7 appears to get hopelessly confused by declaring
this function within a member function of a class template. Go figure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206152 91177308-0d34-0410-b5e6-96231b3b80d8
abstract interface. The only user of this functionality is the JIT
memory manager and it is quite happy to have a custom type here. This
removes a virtual function call and a lot of unnecessary abstraction
from the common case where this is just a *very* thin vaneer around
a call to malloc.
Hopefully still no functionality changed here. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206149 91177308-0d34-0410-b5e6-96231b3b80d8
slabs rather than embedding a singly linked list in the slabs
themselves. This has a few advantages:
- Better utilization of the slab's memory by not wasting 16-bytes at the
front.
- Simpler allocation strategy by not having a struct packed at the
front.
- Avoids paging every allocated slab in just to traverse them for
deallocating or dumping stats.
The latter is the really nice part. Folks have complained from time to
time bitterly that tearing down a BumpPtrAllocator, even if it doesn't
run any destructors, pages in all of the memory allocated. Now it won't.
=]
Also resolves a FIXME with the scaling of the slab sizes. The scaling
now disregards specially sized slabs for allocations larger than the
threshold.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206147 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce ScalarTraits::mustQuote which determines whether or not a
StringRef needs quoting before it is acceptable to output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205955 91177308-0d34-0410-b5e6-96231b3b80d8
The IO normalizer would essentially lump I386 and AMD64 relocations
together. Relocation types with the same numeric value would then get
mapped in appropriately.
For example:
IMAGE_REL_AMD64_ADDR64 and IMAGE_REL_I386_DIR16 both have a numeric
value of one. We would see IMAGE_REL_I386_DIR16 in obj2yaml conversions
of object files with a machine type of IMAGE_FILE_MACHINE_AMD64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205746 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids an extra copy during decompression and avoids the use of
MemoryBuffer which is a weirdly esoteric device that includes unrelated
concepts like "file name" (its rather generic name is a bit misleading).
Similar refactoring of zlib::compress coming up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205676 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is to fix the following warning when compiled with MSVC 64 bit.
warning C4334: '<<' : result of 32-bit shift implicitly converted to 64
bits (was 64-bit shift intended?)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205245 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike my previous commit, don't try to remove the corresponding VK_Mips_GOT yet
even though it shares the same assembly text since that is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205196 91177308-0d34-0410-b5e6-96231b3b80d8
parameters rather than runtime parameters.
There is only one user of these parameters and they are compile time for
that user. Making these compile time seems to better reflect their
intended usage as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205143 91177308-0d34-0410-b5e6-96231b3b80d8
This is a necessary step to lifting some of its configuration into
template parameters rather than runtime parameters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205140 91177308-0d34-0410-b5e6-96231b3b80d8
That causes references to them to be weak references which can collapse
to null if no definition is provided. We call these functions
unconditionally, so a definition *must* be provided. Make the
definitions provided in the .cpp file weak by re-declaring them as weak
just prior to defining them. This should keep compilers which cannot
attach the weak attribute to the definition happy while actually
resolving the symbols correctly during the link.
You might ask yourself upon reading this commit log: how did *any* of
this work before? Well, fun story. It turns out we have some code in
Support (BumpPtrAllocator) which both uses virtual dispatch and has
out-of-line vtables used by that virtual dispatch. If you move the
virtual dispatch into its header in *just* the right way, the optimizer
gets to devirtualize, and remove all references to the vtable. Then the
sad part: the references to this one vtable were the only strong symbol
uses in the support library for llvm-tblgen AFAICT. At least, after
doing something just like this, these symbols stopped getting their weak
definition and random calls to them would segfault instead.
Yay software.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205137 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a second implementation of the AArch64 architecture to LLVM,
accessible in parallel via the "arm64" triple. The plan over the
coming weeks & months is to merge the two into a single backend,
during which time thorough code review should naturally occur.
Everything will be easier with the target in-tree though, hence this
commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205090 91177308-0d34-0410-b5e6-96231b3b80d8
Another part of the ARM64 backend (so tests will be following soon).
This is currently used by the linker to relax adrp/ldr pairs into nops
where possible, though could well be more broadly applicable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205084 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a new header, EndianStream.h, which supplies an adaptor for
writing endian specific data to a raw_ostream.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205032 91177308-0d34-0410-b5e6-96231b3b80d8
BumpPtrAllocator significantly less strange by making it a simple
function of the number of slabs allocated rather than by making it
a recurrance. I *think* the previous behavior was essentially that the
size of the slabs would be doubled after the first 128 were allocated,
and then doubled again each time 64 more were allocated, but only if
every allocation packed perfectly into the slab size. If not, the wasted
space wouldn't be counted toward increasing the size, but allocations
over the size threshold *would*. And since the allocations over the size
threshold might be much larger than the slab size, this could have
somewhat surprising consequences where we rapidly grow the slab size.
This currently requires adding state to the allocator to track the
number of slabs currently allocated, but that isn't too bad. I'm
planning further changes to the allocator that will make this state fall
out even more naturally.
It still doesn't fully decouple the growth rate from the allocations
which are over the size threshold. That fix is coming later.
This specific fix will allow making the entire thing into a more
stateless device and lifting the parameters into template parameters
rather than runtime parameters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204993 91177308-0d34-0410-b5e6-96231b3b80d8
differences from subsequent diffs, and ease review. Going to be
performing some major surgery to simplify this stuff.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204908 91177308-0d34-0410-b5e6-96231b3b80d8
rewrite some of them to be more clear.
The terminology being used in our allocators is making me really sad. We
call things slab allocators that aren't at all slab allocators. It is
quite confusing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204907 91177308-0d34-0410-b5e6-96231b3b80d8
It seems that gcov, when faced with a string that is apparently zero
length, just keeps reading words until it finds a length it likes
better. I'm not really sure why this is, but it's simple enough to
make llvm-cov follow suit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204881 91177308-0d34-0410-b5e6-96231b3b80d8
Implement debug_loc.dwo, as well as llvm-dwarfdump support for dumping
this section.
Outlined in the DWARF5 spec and http://gcc.gnu.org/wiki/DebugFission the
debug_loc.dwo section has more variation than the standard debug_loc,
allowing 3 different forms of entry (plus the end of list entry). GCC
seems to, and Clang certainly, only use one form, so I've just
implemented dumping support for that for now.
It wasn't immediately obvious that there was a good refactoring to share
the implementation of dumping support between debug_loc and
debug_loc.dwo, so they're separate for now - ideas welcome or I may come
back to it at some point.
As per a comment in the code, we could choose different forms that may
reduce the number of debug_addr entries we emit, but that will require
further study.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204697 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a function to Endian.h that reads from and updates a pointer
into a buffer with endian specific data. This is more convenient for
stream-like reading of data than endian::read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204693 91177308-0d34-0410-b5e6-96231b3b80d8
The current state of affairs has auxiliary symbols described as a big
bag of bytes. This is less than satisfying, it detracts from the YAML
file as being human readable.
Instead, allow for symbols to optionally contain their auxiliary data.
This allows us to have a much higher level way of describing things like
weak symbols, function definitions and section definitions.
This depends on D3105.
Differential Revision: http://llvm-reviews.chandlerc.com/D3092
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204214 91177308-0d34-0410-b5e6-96231b3b80d8
Since our error_category is based on the std one, we should have the
same visibility for the constructor. This also allows us to avoid
using the _do_message implementation detail in our own categories.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203998 91177308-0d34-0410-b5e6-96231b3b80d8
Microsoft PE/COFF Spec clearly states that the field is of signed interger
type. However, in reality, it's unsigned. If cl.exe needs to create a large
number of sections for COMDAT sections, it will just create more than 32768
sections. Handling large section number as negative number is not correct.
I think this is a spec bug.
Differential Revision: http://llvm-reviews.chandlerc.com/D3088
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203986 91177308-0d34-0410-b5e6-96231b3b80d8
Chandler voiced some concern with checking this in without some
discussion first. Reverting for now.
This reverts r203703, r203704, r203708, and 203709.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203723 91177308-0d34-0410-b5e6-96231b3b80d8
This replaces the llvm-profdata tool with a version that uses the
recently introduced Profile library. The new tool has the ability to
generate and summarize profdata files as well as merging them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203704 91177308-0d34-0410-b5e6-96231b3b80d8
Add a utility function to convert the Windows path separator to Unix style path
separators. This is used by a subsequent change in clang to enable the use of
Windows SDK headers on Linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203611 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch the unix code for creating hardlinks was unused. The code
for creating symbolic links was implemented in lib/Support/LockFileManager.cpp
and the code for creating hard links in lib/Support/*/Path.inc.
The only use we have for these is in LockFileManager.cpp and it can use both
soft and hard links. Just have a create_link function that creates one or the
other depending on the platform.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203596 91177308-0d34-0410-b5e6-96231b3b80d8
The official specifications state the name to be ARMNT (as per the Microsoft
Portable Executable and Common Object Format Specification v8.3).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203530 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
llvm/MC/MCSectionMachO.h and llvm/Support/MachO.h both had the same
definitions for the section flags. Instead, grab the definitions out of
support.
No functionality change.
Reviewers: grosbach, Bigcheese, rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2998
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203211 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commits r203136, r203137, and r203138.
This code doesn't build on Windows. Even on Vista+, Windows requires
elevated privileges to create a symlink. Therefore we can't use
symlinks in the compiler. We'll have to find another approach.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203143 91177308-0d34-0410-b5e6-96231b3b80d8
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203083 91177308-0d34-0410-b5e6-96231b3b80d8
selfhost.
The 'Core.h' C-API header is part of the IR LLVM library. (One might
even argue it should be called IR.h, but that's a separate point.) We
can't include it into a Support header without violating the layering,
and in a way that breaks modules. MemoryBuffer's opaque C type was being
defined in the Core.h C-API header despite being in the Support library,
and thus we ended up with this weird issue.
It turns out that there were other constructs from the Support library
in the Core.h header. This patch lifts all of them into Support.h and
then includes that into Core.h.
The only possible fallout is if someone was including Support.h and
relying on Core.h to be visible for their own uses. Considering the
narrow interface actually provided by the C-API for the Support library,
this seems a very, very unlikely mistake.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203071 91177308-0d34-0410-b5e6-96231b3b80d8
already lived there and it is where it belongs -- this is the in-memory
debug location representation.
This is just cleanup -- Modules can actually cope with this, but that
doesn't make it right. After chatting with folks that have out-of-tree
stuff, going ahead and moving the rest of the headers seems preferable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202960 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow external callers of these functions to switch over time
rather than forcing a breaking change all a once. These particular
functions were determined by building clang/lld/lldb.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202959 91177308-0d34-0410-b5e6-96231b3b80d8
Looks like llvm-readobj is the only customer of this code, and apparently
there's no test to cover this function. I'll write it after finishing
plumbing from llvm-objdump to there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202915 91177308-0d34-0410-b5e6-96231b3b80d8
source file had already been moved. Also move the unittest into the IR
unittest library.
This may seem an odd thing to put in the IR library but we only really
use this with instructions and it needs the LLVM context to work, so it
is intrinsically tied to the IR library.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202842 91177308-0d34-0410-b5e6-96231b3b80d8
PassInfo structures of the legacy pass manager. Also give it the Legacy
prefix as it is not a particularly widely used header.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202839 91177308-0d34-0410-b5e6-96231b3b80d8
a bit surprising, as the class is almost entirely abstracted away from
any particular IR, however it encodes the comparsion predicates which
mutate ranges as ICmp predicate codes. This is reasonable as they're
used for both instructions and constants. Thus, it belongs in the IR
library with instructions and constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202838 91177308-0d34-0410-b5e6-96231b3b80d8
this would have been required because of the use of DataLayout, but that
has moved into the IR proper. It is still required because this folder
uses the constant folding in the analysis library (which uses the
datalayout) as the more aggressive basis of its folder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202832 91177308-0d34-0410-b5e6-96231b3b80d8
Move the test for this class into the IR unittests as well.
This uncovers that ValueMap too is in the IR library. Ironically, the
unittest for ValueMap is useless in the Support library (honestly, so
was the ValueHandle test) and so it already lives in the IR unittests.
Mmmm, tasty layering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202821 91177308-0d34-0410-b5e6-96231b3b80d8
name might indicate, it is an iterator over the types in an instruction
in the IR.... You see where this is going.
Another step of modularizing the support library.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202815 91177308-0d34-0410-b5e6-96231b3b80d8
business.
This header includes Function and BasicBlock and directly uses the
interfaces of both classes. It has to do with the IR, it even has that
in the name. =] Put it in the library it belongs to.
This is one step toward making LLVM's Support library survive a C++
modules bootstrap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202814 91177308-0d34-0410-b5e6-96231b3b80d8
Breaks the MSVC build.
DataStream.cpp(44): error C2552: 'llvm::Statistic::Value' : non-aggregates cannot be initialized with initializer list
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202731 91177308-0d34-0410-b5e6-96231b3b80d8
With C++11 we finally have a standardized way to specify atomic operations. Use
them to replace the existing custom implemention. Sadly the translation is not
entirely trivial as std::atomic allows more fine-grained control over the
atomicity. I tried to preserve the old semantics as well as possible.
Differential Revision: http://llvm-reviews.chandlerc.com/D2915
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202730 91177308-0d34-0410-b5e6-96231b3b80d8
to the build being C++11.
There is clearly still plenty of simplification than can be done here by
using standard type traits instead of rolling our own in many places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202586 91177308-0d34-0410-b5e6-96231b3b80d8
on the fact that we now build in C++11 mode with modern compilers. This
should flush out any issues. If the build bots are happy with this, I'll
GC all the code for coping without R-value references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202574 91177308-0d34-0410-b5e6-96231b3b80d8
After this I will set the default back to F_None. The advantage is that
before this patch forgetting to set F_Binary would corrupt a file on windows.
Forgetting to set F_Text produces one that cannot be read in notepad, which
is a better failure mode :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202052 91177308-0d34-0410-b5e6-96231b3b80d8
