and avoid cloning unused decls into every partition.
Module partitioning showed up as a source of significant overhead when I
profiled some trivial test cases. Avoiding the overhead of partitionging
for uncalled functions helps to mitigate this.
This change also means that it is no longer necessary to have a
LazyEmittingLayer underneath the CompileOnDemand layer, since the
CompileOnDemandLayer will not extract or emit function bodies until they are
called.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236465 91177308-0d34-0410-b5e6-96231b3b80d8
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235145 91177308-0d34-0410-b5e6-96231b3b80d8
even if there are no references to them in the code.
This allows exceptions thrown from JIT'd code to be caught by the JIT itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234975 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is the first in a series of patches to eventually add support for TLS relocations to RuntimeDyld. This patch resolves an issue in the current GOT handling, where GOT entries would be reused between object files, which leads to the same situation that necessitates the GOT in the first place, i.e. that the 32-bit offset can not cover all of the address space. Thus this patch makes the GOT object-file-local.
Unfortunately, this still isn't quite enough, because the MemoryManager does not yet guarantee that sections are allocated sufficiently close to each other, even if they belong to the same object file. To address this concern, this patch also adds a small API abstraction on top of the GOT allocation mechanism that will allow (temporarily, until the MemoryManager is improved) using the stub mechanism instead of allocating a different section. The actual switch from separate section to stub mechanism will be part of a follow-on commit, so that it can be easily reverted independently at the appropriate time.
Test Plan: Includes a test case where the GOT of two object files is artificially forced to be apart by several GB.
Reviewers: lhames
Reviewed By: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8813
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234839 91177308-0d34-0410-b5e6-96231b3b80d8
This keeps the program and JIT output in sync, enabling FileCheck to test the
order of target program and JIT events.
In particular we can now test that main is not compiled until after the global
constructor has run.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234815 91177308-0d34-0410-b5e6-96231b3b80d8
debugging output to the LLI orc-lazy JIT, and update the orc-lazy "hello.ll"
test to actually test for lazy compilation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234805 91177308-0d34-0410-b5e6-96231b3b80d8
use these to add support for C++ static ctors/dtors to the Orc-lazy JIT in LLI.
Replace the trivial_retval_1 regression test - the new 'hello' test is covering
strictly more code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233885 91177308-0d34-0410-b5e6-96231b3b80d8
These regression tests are supposed to test small code model support, but have
been XFAIL'd because we don't have an in-tree memory manager that can guarantee
a small-code-model compatible memory layout. Unfortunately, they can
occasionally pass if they get lucky with memory allocation, causing unexpected
passes on the bots. That's not very helpful.
I'm going to remove these until we have the infrastructure (small-code-model
compatible memory manager) to run them properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233722 91177308-0d34-0410-b5e6-96231b3b80d8
This ensures that we're building and testing the CompileOnDemand layer, at least
in a basic way.
Currently x86-64 only, and with limited to no library calls enabled (depending
on host platform). Patches welcome. ;)
To enable access to the lazy JIT, this patch replaces the '-use-orcmcjit' lli
option with a new option:
'-jit-kind={ mcjit | orc-mcjit | orc-lazy }'.
All regression tests are updated to use the new option, and one trivial test of
the new lazy JIT is added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233182 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232184 91177308-0d34-0410-b5e6-96231b3b80d8
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
ObjectLinkingLayer.
There are a two of overloads for addObject, one of which transfers ownership of
the underlying buffer to OrcMCJITReplacement. This commit makes the ownership
transfering version pass ownership down to the ObjectLinkingLayer in order to
prevent the issue described in r227778.
I think this commit will fix the sanitizer bot failures that necessitated the
removal of the load-object-a.ll regression test in r227785, so I'm reinstating
that test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227845 91177308-0d34-0410-b5e6-96231b3b80d8
These tests used to test the legacy JIT but since that has been removed they're
just redundantly testing MCJIT. Remove them and just leave their counterparts in
test/ExecutionEngine/MCJIT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227010 91177308-0d34-0410-b5e6-96231b3b80d8
Should make the tests run when using CMake on systems where 'uname -p'
reports "amd64", such as FreeBSD.
Should fix PR21559.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226937 91177308-0d34-0410-b5e6-96231b3b80d8
On LP64 platforms, it will work or not depending on the choosen memory
layout, so neither PASS nor XFAIL is appropiate.
As UNSUPPORTED as per-test target doesn't exist (yet), remove the test
instead to unbreak the builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222767 91177308-0d34-0410-b5e6-96231b3b80d8
Fix for LLI failure on Windows\X86: http://llvm.org/PR5053
LLI.exe crashes on Windows\X86 when single precession floating point
intrinsics like the following are used: acos, asin, atan, atan2, ceil,
copysign, cos, cosh, exp, floor, fmin, fmax, fmod, log, pow, sin, sinh,
sqrt, tan, tanh
The above intrinsics are defined as inline-expansions in math.h, and are
not exported by msvcr120.dll (Win32 API GetProcAddress returns null).
For an FREM instruction, the JIT compiler generates a call to a stub for
the fmodf() intrinsic, and adds a relocation to fixup at load time. The
loader searches the libraries for the function, but fails because the
symbol is not exported. So, the call target remains NULL and the
execution crashes.
Since the math functions are loaded at JIT/runtime, the JIT can patch
CALL instruction directly instead of the searching the libraries'
exported symbols. However, this fix caused build failures due to
unresolved symbols like _fmodf at link time.
Therefore, the current fix defines helper functions in the Runtime
link/load library to perform the above operations. The address of these
helper functions are used to patch up the CALL instruction at load time.
Reviewers: lhames, rnk
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D5387
Patch by Swaroop Sridhar!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221947 91177308-0d34-0410-b5e6-96231b3b80d8
On AArch64, GOT references are page relative (ADRP + LDR), so they can't be
applied until we know exactly where, within a page, the GOT entry will be in
the target address space.
Fixes <rdar://problem/18693976>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220347 91177308-0d34-0410-b5e6-96231b3b80d8
symbols.
Previously we have only been testing these relocations with external symbols.
<rdar://problem/18308413>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217635 91177308-0d34-0410-b5e6-96231b3b80d8
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reinstates commits r215111, 215115, 215116, 215117, 215136.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216982 91177308-0d34-0410-b5e6-96231b3b80d8
be deleted. This will be reapplied as soon as possible and before
the 3.6 branch date at any rate.
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reverts commits r215111, 215115, 215116, 215117, 215136.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215154 91177308-0d34-0410-b5e6-96231b3b80d8
