Don't terminate location ranges for register-described variables
at the end of machine basic block if this register is never modified
in the function body, except for the prologue and epilogue. Prologue
location is guessed by FrameSetup flags on MachineInstructions, while
epilogue location is deduced from debug locations of instructions
in the basic blocks ending with return instructions.
This patch is mostly targeted to fix non-trivial debug locations for
variables addressed via stack and frame pointers.
It is not really a generic fix. We can still produce poor debug info
for register-described variables if this register *is* modified somewhere
in the function, but in unrelated places. This might be the case for the debug
info in optimized binaries (e.g. for local variables in inlined functions).
LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting
DBG_VALUE instructions, but this pass is tied to greedy register allocator,
which is used in optimized builds only. Proper fix would likely involve
generalizing LiveDebugVariables to all register allocators. See more discussion
in http://reviews.llvm.org/D3933 review thread.
I'm proceeding with this patch to fix immediate severe problems and
important cases, e.g. fix completely broken debug info with AddressSanitizer
and fix PR19307 (missing debug info for by-value std::string arguments).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210492 91177308-0d34-0410-b5e6-96231b3b80d8
This ensures that member functions, for example, are entered into
pubnames with their fully qualified name, rather than inside the global
namespace.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210379 91177308-0d34-0410-b5e6-96231b3b80d8
These checks were accidentally skipping the 0x prefix in the hex
offsets, then cunningly ignoring the prefix in the use of those captured
values.
Except in the case of the unit length, where the match was only matching
the leading '0' before the x in the 0x prefix, then matching that
against the length. We can't actually express the length association
here, as the length field in the Compile Unit header does not include
the length field itself, but the length field in the pubnames section
/does/ include the size of the length field in the Compile Unit header -
so the two numbers are actually 4 bytes different. Just skip matching
that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210364 91177308-0d34-0410-b5e6-96231b3b80d8
This was added to test that DW_AT_GNU_pubnames used sec_offset in DWARF4
and data4 in DWARF3 and below. Since then we've updated
DW_AT_GNU_pubnames to be a flag, rather than a section offset anyway.
Granted this still differs between DWARF 3 and DWARF 4
(FORM_flag_present versun FORM_flag) but it doesn't seem worthwhile
testing that codepath again here. It's covered adequately in many other
test cases.
And while I'm here, don't hardcode the byte size of the compile unit -
it's not relevant to this test and just makes it brittle if/when
anything changes in the way this CU is emitted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210362 91177308-0d34-0410-b5e6-96231b3b80d8
After much puppetry, here's the major piece of the work to ensure that
even when a concrete definition preceeds all inline definitions, an
abstract definition is still created and referenced from both concrete
and inline definitions.
Variables are still broken in this case (see comment in
dbg-value-inlined-parameter.ll test case) and will be addressed in
follow up work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209677 91177308-0d34-0410-b5e6-96231b3b80d8
A further step to correctly emitting concrete out of line definitions
preceeding inlined instances of the same program.
To do this, emission of subprograms must be delayed until required since
we don't know which (abstract only (if there's no out of line
definition), concrete only (if there are no inlined instances), or both)
DIEs are required at the start of the module.
To reduce the test churn in the following commit that actually fixes the
bug, this commit introduces the lazy DIE construction and cleans up test
cases that are impacted by the changes in the resulting DIE ordering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209675 91177308-0d34-0410-b5e6-96231b3b80d8
This is a precursor to fixing inlined debug info where the concrete,
out-of-line definition may preceed any inlined usage. To cope with this,
the attributes that may appear on the concrete definition or the
abstract definition are delayed until the end of the module. Then, if an
abstract definition was created, it is referenced (and no other
attributes are added to the out-of-line definition), otherwise the
attributes are added directly to the out-of-line definition.
In a couple of cases this causes not just reordering of attributes, but
reordering of types. When the creation of the attribute is delayed, if
that creation would create a type (such as for a DW_AT_type attribute)
then other top level DIEs may've been constructed during the delay,
causing the referenced type to be created and added after those
intervening DIEs. In the extreme case, in cross-cu-inlining.ll, this
actually causes the DW_TAG_basic_type for "int" to move from one CU to
another.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209674 91177308-0d34-0410-b5e6-96231b3b80d8
This old test didn't have the argument numbering that's now squirelled
away in the high bits of the line number in the DW_TAG_arg_variable
metadata.
Add the numbering and update the test to ensure arguments are in-order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209669 91177308-0d34-0410-b5e6-96231b3b80d8
We still do temporary files in many cases, just updating this particular
one because I was debugging it and made this change while doing so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209601 91177308-0d34-0410-b5e6-96231b3b80d8
In an effort to fix inlined debug info in situations where the out of
line definition of a function preceeds any inlined usage, the order in
which some attributes are added to subprogram DIEs may change. (in
essence, definition-necessary attributes like DW_AT_low_pc/high_pc will
be added immediately, but the names, types, and other features will be
delayed to module end where they may either be added to the subprogram
DIE or instead reference an abstract definition for those values)
These tests can be generalized to be resilient to this change. 5 or so
tests actually have to be incompatibly changed to cope with this
reordering and will go along with the change that affects the order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209554 91177308-0d34-0410-b5e6-96231b3b80d8
It's an unnecessary detail for this test and just gets in the way when
making unrelated changes to the output in this test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209553 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r208930, r208933, and r208975.
It seems not all fission consumers are ready to handle this behavior.
Reverting until tools are brought up to spec.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209338 91177308-0d34-0410-b5e6-96231b3b80d8
make the functions to set them non-static.
Move and rename the llvm specific backend options to avoid conflicting
with the clang option.
Paired with a backend commit to update.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209238 91177308-0d34-0410-b5e6-96231b3b80d8
Since we visit the whole list of subprograms for each CU at module
start, this is clearly true - don't test for the case, just assert it.
A few old test cases seemed to have incomplete subprogram lists, but any
attempt to reproduce them shows full subprogram lists that even include
entities that have been completely inlined and the out of line
definition removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209178 91177308-0d34-0410-b5e6-96231b3b80d8
When I refactored this in r208636 I accidentally caused this to be added
multiple times to each abstract subprogram (not accounting for the
deduplicating effect of the InlinedSubprogramDIEs set).
This got better in r208798 when the abstract definitions got the
attribute added to them at construction time, but still had the
redundant copies introduced in r208636.
This commit removes those excess DW_AT_inlines and relies solely on the
insertion in r208798.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209166 91177308-0d34-0410-b5e6-96231b3b80d8
The check in DwarfDebug::constructScopeDIE was meant to consider inlined
subroutines as any non-top-level scope that was a subprogram. Instead of
checking "not top level scope" it was checking if the /subprogram's/
scope was non-top-level.
Fix this and beef up a test case to demonstrate some of the missing
inlined_subroutines are no longer missing.
In the course of fixing this I also found that r208748 (with this fix)
found one /extra/ inlined_subroutine in concrete_out_of_line.ll due to
two inlined_subroutines having the same inlinedAt location. The previous
implementation was collapsing these into a single inlined subroutine.
I'm not sure what the original code was that created this .ll file so
I'm not sure if this actually happens in practice today. Since we
deliberately include column information to disambiguate two calls on the
same line, that may've addressed this bug in the frontend, but it's good
to know that workaround isn't necessary for this particular case
anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209165 91177308-0d34-0410-b5e6-96231b3b80d8
DIBuilder maintains this invariant and the current DwarfDebug code could
end up doing weird things if it contained declarations (such as putting
the definition DIE inside a CU that contained the declaration - this
doesn't seem like a good idea, so rather than adding logic to handle
this case we'll just ban in for now & cross that bridge if we come to
it later).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209004 91177308-0d34-0410-b5e6-96231b3b80d8
Since type units in the dwo file are handled by a debug aware tool, they
don't need to leverage the ELF comdat grouping to implement
deduplication. Avoid creating all the .group sections for these as a
space optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208930 91177308-0d34-0410-b5e6-96231b3b80d8
Many old tests using prior schemas still had some brokenness here (both
indirect arrays and arrays with single bogus elements). Fixed those up
so they don't hit the new assertions.
Also reduced nesting in some places, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208817 91177308-0d34-0410-b5e6-96231b3b80d8
This test was using the inliner and other optimizations to test a case
that's actually a bug anyway. Bug and possible fix/discussion described
here ( http://reviews.llvm.org/D3714 ).
But the functionality that was implemented along with this test is still
desired, so simplify the test to verify a more obvious/less wrong case
that the functionality addressed: looking through const sugar to the
underlying type when emitting a constant (so the constant is emitted as
signed/unsigned as appropriate depending on the signedness of the
underlying type).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208504 91177308-0d34-0410-b5e6-96231b3b80d8
Doesn't seem a good reason to duplicate this code (it was more literally
duplicated prior to r208494, and while the dataN code /does/ actually
fire in this case, it doesn't seem necessary (and the DWARF standard
recommends using udata/sdata pervasively instead of dataN, so as to
indicate signedness of the values))
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208495 91177308-0d34-0410-b5e6-96231b3b80d8
Breaks GDB buildbot
(http://lab.llvm.org:8011/builders/clang-x86_64-ubuntu-gdb-75/builds/14517)
GCC emits DW_AT_object_pointer /everywhere/ (declaration, abstract
definition, inlined subroutine), but it looks like GCC relies on it
being somewhere other than the declaration, at least. I'll experiment
further & can hopefully still remove it from the inlined_subroutine.
This reverts commit r207705.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207719 91177308-0d34-0410-b5e6-96231b3b80d8
They just don't need to be there - they're inherited from the abstract
definition. In theory I would like them to be inherited from the
declaration, but the DWARF standard doesn't quite say that... we can
probably do it anyway but I'm less confident about that so I'll leave it
for a separate commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207717 91177308-0d34-0410-b5e6-96231b3b80d8
This effectively reverts r164326, but adds some comments and
justification and ensures we /don't/ emit the DW_AT_object_pointer on
the (abstract and concrete) definitions. (while still preserving it on
standalone definitions involving ObjC Blocks)
This does increase the size of member function declarations from 7 to 11
bytes, unfortunately, but still seems like the Right Thing to do so that
callers that see only the declaration still have the information about
the object pointer. That said, I don't know what, if any, DWARF
consumers don't have a heuristic to guess this in the case of normal
C++ member functions - perhaps we can remove it entirely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207705 91177308-0d34-0410-b5e6-96231b3b80d8
While refactoring out constructScopeDIE into two functions I realized we
were emitting DW_AT_object_pointer in the inlined subroutine when we
didn't need to (GCC doesn't, and the abstract subprogram definition has
the information already).
So here's the refactoring and the bug fix. This is one step of
refactoring to remove some subtle memory ownership semantics. It turns
out the original constructScopeDIE returned ownership in its return
value in some cases and not in others. The split into two functions now
separates those two semantics - further cleanup (unique_ptr, etc) will
follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207441 91177308-0d34-0410-b5e6-96231b3b80d8
Since there's no way to ensure the type unit in the .dwo and the type
unit skeleton in the .o are correlated, this cannot work.
This implementation is a bit inefficient for a few reasons, called out
in comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207323 91177308-0d34-0410-b5e6-96231b3b80d8
buildbot - do not insert debug intrinsics before phi nodes.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207269 91177308-0d34-0410-b5e6-96231b3b80d8
Debug info: Let dbg.values inserted by LowerDbgDeclare inherit the location
of the dbg.value. This gets rid of tons of redundant variable DIEs in
subscopes.
rdar://problem/14874886, rdar://problem/16679936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207236 91177308-0d34-0410-b5e6-96231b3b80d8
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207235 91177308-0d34-0410-b5e6-96231b3b80d8
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207165 91177308-0d34-0410-b5e6-96231b3b80d8
of the dbg.value. This gets rid of tons of redundant variable DIEs in
subscopes.
rdar://problem/14874886, rdar://problem/16679936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207135 91177308-0d34-0410-b5e6-96231b3b80d8
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine-intrinsics testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207130 91177308-0d34-0410-b5e6-96231b3b80d8
Emit the flag to indicate to the assembler that a section contains data if there
is pre-populated data present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207028 91177308-0d34-0410-b5e6-96231b3b80d8
Thanks to dblaikie for updating the testcase!
Debug info: (bugfix) C++ C/Dtors can be compiled to multiple functions,
therefore, their declaration cannot have one DW_AT_linkage_name.
The specific instances however can and should have that attribute.
This patch reorders the code in DwarfUnit::getOrCreateSubprogramDIE()
to emit linkage names for C/Dtors.
rdar://problem/16362674.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206210 91177308-0d34-0410-b5e6-96231b3b80d8
I found this from a particular GDB test suite case of inlining
(something similar is provided as a test case) but came across a few
other related cases (other callers of the same functions, and one other
instance of the same coding mistake in a separate function).
I'm not sure what the best way to test this is (let alone to cover the
other cases I discovered), so hopefully this sufficies - open to ideas.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206130 91177308-0d34-0410-b5e6-96231b3b80d8
therefore, their declaration cannot have one DW_AT_linkage_name.
The specific instances however can and should have that attribute.
This patch reorders the code in DwarfUnit::getOrCreateSubprogramDIE()
to emit linkage names for C/Dtors.
rdar://problem/16362674.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206096 91177308-0d34-0410-b5e6-96231b3b80d8
While we were encoding 64 bit values (data8) in the subrange itself,
using a 32 bit type for the subrange was still confusing the gdb. Oh,
and make it unsigned too.
As the comment points out, this could be pushed into the frontend so
that it would be 32 or 64 bit as appropriate, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205512 91177308-0d34-0410-b5e6-96231b3b80d8
Seems we didn't have any test coverage for merging... awesome. So I
added some - but hit an llvm-objdump bug while I was there. I'm choosing
not to shave that yak right now.
Code review feedback/bug catch by Adrian Prantl in r205360.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205373 91177308-0d34-0410-b5e6-96231b3b80d8
This moves one case of raw text checking down into the MCStreamer
interfaces in the form of a virtual function, even if we ultimately end
up consolidating on the one-or-many line tables issue one day, this is
nicer in the interim. This just generally streamlines a bunch of use
cases into a common code path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205287 91177308-0d34-0410-b5e6-96231b3b80d8
Implement debug_loc.dwo, as well as llvm-dwarfdump support for dumping
this section.
Outlined in the DWARF5 spec and http://gcc.gnu.org/wiki/DebugFission the
debug_loc.dwo section has more variation than the standard debug_loc,
allowing 3 different forms of entry (plus the end of list entry). GCC
seems to, and Clang certainly, only use one form, so I've just
implemented dumping support for that for now.
It wasn't immediately obvious that there was a good refactoring to share
the implementation of dumping support between debug_loc and
debug_loc.dwo, so they're separate for now - ideas welcome or I may come
back to it at some point.
As per a comment in the code, we could choose different forms that may
reduce the number of debug_addr entries we emit, but that will require
further study.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204697 91177308-0d34-0410-b5e6-96231b3b80d8
This is used to avoid relocations in the dwo file by allowing
DW_AT_ranges specified in debug_info.dwo to be relative to this base
address. (r204667 implements the base-relative DW_AT_ranges side of
this)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204672 91177308-0d34-0410-b5e6-96231b3b80d8
This removes the debug_ranges relocations from debug_info.dwo (but
doesn't implement the DW_AT_GNU_ranges_base which is also necessary for
correct functioning)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204668 91177308-0d34-0410-b5e6-96231b3b80d8
Type units have no addresses, so there's no need for DW_AT_addr_base.
This removes another relocation from every skeletal type unit and brings
LLVM's skeletal type units in line with GCC's (containing only
GNU_dwo_name (strp), comp_dir (strp), and GNU_pubnames (flag_present)).
Cary's got some ideas about using str_index in the .o file to reduce
those last two relocations (well, replace two relocations with one
relocation (pointing to the string index) and two indicies)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204506 91177308-0d34-0410-b5e6-96231b3b80d8
The function exists to force an expression to be absolute, but there it is not
possible to force a symbol reference since
a = b
.long a
means something else.
This is an alternative fix for pr9951 that uses an assert. It then deletes
the old pr9951 test that was testing nothing already.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204399 91177308-0d34-0410-b5e6-96231b3b80d8
Use the range machinery for DW_AT_ranges and DW_AT_high/lo_pc.
This commit moves us from a single range per subprogram to extending
ranges if we are:
a) In the same section, and
b) In the same enclosing CU.
This means we have more fine grained ranges for compile units, and fewer
ranges overall when we have multiple functions in the same CU
adjacent to each other in the object file.
Also remove all of the earlier hacks around this functionality for
function sections etc. Also update all of the testcases to take into
account the merging functionality.
with a fix for location entries in the debug_loc section:
Make sure that debug loc entries are relative to the low_pc
of the compile unit. This means that when we only have a single
range that the offset should be just relative to the low_pc
of the unit, for multiple ranges for a CU this means that we'll be
relative to 0 which we emit along with DW_AT_ranges.
This mostly shows up with linked binaries, so add a testcase with
multiple CUs so that our location is going to be offset of a CU
with a non-zero low_pc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204377 91177308-0d34-0410-b5e6-96231b3b80d8
This appears to trigger failures with optimization and function arguments somehow.
This reverts commit r204277.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204286 91177308-0d34-0410-b5e6-96231b3b80d8
This commit moves us from a single range per subprogram to extending
ranges if we are:
a) In the same section, and
b) In the same enclosing CU.
This means we have more fine grained ranges for compile units, and fewer
ranges overall when we have multiple functions in the same CU
adjacent to each other in the object file.
Also remove all of the earlier hacks around this functionality for
function sections etc. Also update all of the testcases to take into
account the merging functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204277 91177308-0d34-0410-b5e6-96231b3b80d8
This isn't a complete fix - it falls back to non-comp_dir when multiple
compile units are in play. Adding a map of comp_dir to table is part of
the more general solution, but I gave up (in the short term) when I
realized I'd also have to calculate the size of each type unit so as to
produce correct DW_AT_stmt_list attributes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204202 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce a slightly tighter wrapper around the header structure that
handles this use case. (MCDwarfDwoLineTable)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204101 91177308-0d34-0410-b5e6-96231b3b80d8
This removes an attribute (and more importantly, a relocation) from
skeleton type units and removes some unnecessary file names from the
debug_line section that remains in the .o (and linked executable) file.
There's still a few places we could shave off some more space here:
* use compilation dir of the underlying compilation unit (since all the
type units share that compilation dir - though this would be more
complicated in LTO cases where they don't (keep a map of compilation
dir->line table header?))
* Remove some of the unnecessary header fields from the line table since
they're not needed in this situation (about 12 bytes per table).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204099 91177308-0d34-0410-b5e6-96231b3b80d8
I could fold the callers into their one call site, but the indirection
(given how verbose choosing the section is) seemed helpful.
The use of a member function pointer's a bit "tricky", but seems limited
enough, the call sites are simple/clean/clear, and there's only one use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203619 91177308-0d34-0410-b5e6-96231b3b80d8
This is consistent with GDB ToT and reduces the number of relocations in
(type and compile) units, substantially reducing relocations and debug
size in fission + type units builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203082 91177308-0d34-0410-b5e6-96231b3b80d8
scan the register file for sub- and super-registers.
No functionality change intended.
(Tests are updated because the comments in the assembler output are
different.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202416 91177308-0d34-0410-b5e6-96231b3b80d8
any ranges to the list of ranges for the CU as we don't want to emit
them anyway. This ensures that we will still emit ranges if we have
a compile unit compiled with only line tables and one compiled with
full debug info requested (we'll emit for the one with full debug info).
Update testcase metadata accordingly to continue emitting ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202333 91177308-0d34-0410-b5e6-96231b3b80d8
This is refactoring / simplifying code, updating comments and enabling the
testcase on non-x86 platforms.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202199 91177308-0d34-0410-b5e6-96231b3b80d8
Variadic functions have an unspecified parameter tag after the last
argument. In IR this is represented as an unspecified parameter in the
subroutine type.
Paired commit with CFE r202185.
rdar://problem/13690847
This re-applies r202184 + a bugfix in DwarfDebug's argument handling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202188 91177308-0d34-0410-b5e6-96231b3b80d8
Variadic functions have an unspecified parameter tag after the last
argument. In IR this is represented as an unspecified parameter in the
subroutine type.
Paired commit with CFE.
rdar://problem/13690847
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202184 91177308-0d34-0410-b5e6-96231b3b80d8
passing down an AsmPrinter instance so we could compute the size of
the block which could be target specific. All of the test cases in
the unittest don't have any target specific data so we can use a NULL
AsmPrinter there. This also depends upon block data being added as
integers.
We can now hash the entire fission-cu.ll compile unit so turn the
flag on there with the hash value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201752 91177308-0d34-0410-b5e6-96231b3b80d8
alongside DIEBlock and replace uses accordingly. Use DW_FORM_exprloc
in DWARF4 and later code. Update testcases.
Adding a DIELoc instead of using extra forms inside DIEBlock so
that we can keep location expressions separate from other uses. No
direct use at the moment, however, it's not a lot of code and
using a separately named class keeps it somewhat more obvious
what's going on in various locations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201481 91177308-0d34-0410-b5e6-96231b3b80d8
This broke in r185459 while TLS support was being generalized to handle
non-symbol TLS representations.
I thought about/tried having an enum rather than a bool to track the
TLS-ness of the address table entry, but namespaces and naming seemed
more hassle than it was worth for only one caller that needed to specify
this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201469 91177308-0d34-0410-b5e6-96231b3b80d8
Type units will share the statement list of their defining compile unit.
This is a tradeoff that reduces .o debug info size at the cost of some
linked debug info size (since the contents of those string tables won't
be deduplicated along with the type unit) which seems right for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201445 91177308-0d34-0410-b5e6-96231b3b80d8
Recommitting r201380 (reverted in r201389)
Recommitting r201351 and r201355 (reverted in r201351 and r201355)
We weren't emitting the an empty (header only) line table when the line
table was empty - this made the DWARF invalid (the compile unit would
point to the zero-size debug_lines section where there should've been an
empty line table but there was nothing at all). Fix that, and as a
consequence this works around/addresses PR18809.
Also, we emit a non-empty line table to workaround a darwin linker bug,
so XFAILing on darwin too.
Also, mark the test as 'REQUIRES: object-emission' because it does.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201429 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds support for emitting DWARF path discriminator values in
the object streamer. It also changes the DWARF dumper to show
discriminator values in the line table output.
Reviewers: echristo
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2794
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201427 91177308-0d34-0410-b5e6-96231b3b80d8
Recommitting r201351 and r201355 (reverted in r201351 and r201355)
We weren't emitting the an empty (header only) line table when the line
table was empty - this made the DWARF invalid (the compile unit would
point to the zero-size debug_lines section where there should've been an
empty line table but there was nothing at all). Fix that, and as a
consequence this works around/addresses PR18809.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201380 91177308-0d34-0410-b5e6-96231b3b80d8
Since I just discovered this while poking at other things, here's the
test case so I have it to come back to later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201267 91177308-0d34-0410-b5e6-96231b3b80d8
There's still one piece missing here, which is adding the
DW_AT_stmt_list to the type unit that refer's to the compile unit's line
table. Working on that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201198 91177308-0d34-0410-b5e6-96231b3b80d8
Debug info: Emit values in subregisters that do not have a separate
DWARF register number by emitting a super-register + DW_OP_bit_piece.
This is necessary because on x86_64, there are no DWARF register numbers
for i386-style subregisters.
Fixes a bunch of FIXMEs.
rdar://problem/16015314
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201190 91177308-0d34-0410-b5e6-96231b3b80d8
DWARF register number by emitting a super-register + DW_OP_bit_piece.
This is necessary because on x86_64, there are no DWARF register numbers
for i386-style subregisters.
Fixes a bunch of FIXMEs.
rdar://problem/16015314
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201180 91177308-0d34-0410-b5e6-96231b3b80d8
A bunch of test cases needed to be cleaned up for this, many my fault -
when implementid imported modules I updated test cases by simply
duplicating the prior metadata field - which wasn't always the empty
metadata entry.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200731 91177308-0d34-0410-b5e6-96231b3b80d8
This ensures DWARF consumers don't confuse these references for
definitions. I'd argue it might be nice to improve debuggers so we don't
need this, but it's just one field in an abbreviation anyway - so it
doesn't seem worth the fight.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200569 91177308-0d34-0410-b5e6-96231b3b80d8
are relative to in the compile unit. Currently let's just use 0...
Thanks to Greg Clayton for the catch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200425 91177308-0d34-0410-b5e6-96231b3b80d8
module since there's no range guarantee that we could make given
output order. This also fixes up the testcases that have multiple
CUs to have the correct range offset.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200422 91177308-0d34-0410-b5e6-96231b3b80d8
Sweep the codebase for common typos. Includes some changes to visible function
names that were misspelt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200018 91177308-0d34-0410-b5e6-96231b3b80d8
compile unit. Make these relocations on the platforms that need
relocations and add a routine to ensure that we don't put the
addresses in an offset table for split dwarf.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199990 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r198865 which reverts r198851.
ASan identified a use-of-uninitialized of the DwarfTypeUnit::Ty variable
in skeleton type units.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198908 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it easier to write a test that's mostly shared between
fission and non-fission (using FileCheck's multiple prefix support).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198806 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r198398, thus reapplying r198397.
I had accidentally introduced an endianness issue when applying the hash
to the type unit. Using support::ulittle64_t in the reinterpret_cast in
addDwarfTypeUnitType fixes this issue.
Original commit message:
Debug Info: Type Units: Simplify type hashing using IR-provided unique
names.
What's good for LTO metadata size problems ought to be good for non-LTO
debug info size too, so let's rely on the same uniqueness in both cases.
If it's insufficient for non-LTO for whatever reason (since we now won't
be uniquing CU-local types or any C types - but these are likely to not
be the most significant contributors to type bloat) we should consider a
frontend solution that'll help both LTO and non-LTO alike, rather than
using DWARF-level DIE-hashing that only helps non-LTO debug info size.
It's also much simpler this way and benefits C++ even more since we can
deduplicate lexically separate definitions of the same C++ type since
they have the same mangled name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198436 91177308-0d34-0410-b5e6-96231b3b80d8
Reverting due to bot failure I won't have time to investigate until
tomorrow.
This reverts commit r198397.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198398 91177308-0d34-0410-b5e6-96231b3b80d8
What's good for LTO metadata size problems ought to be good for non-LTO
debug info size too, so let's rely on the same uniqueness in both cases.
If it's insufficient for non-LTO for whatever reason (since we now won't
be uniquing CU-local types or any C types - but these are likely to not
be the most significant contributors to type bloat) we should consider a
frontend solution that'll help both LTO and non-LTO alike, rather than
using DWARF-level DIE-hashing that only helps non-LTO debug info size.
It's also much simpler this way and benefits C++ even more since we can
deduplicate lexically separate definitions of the same C++ type since
they have the same mangled name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198397 91177308-0d34-0410-b5e6-96231b3b80d8
The cgo problem was that it wants dwarf2 which doesn't support direct
constant encoding of the location. So let's add support for dwarf2
encoding (using a location expression) of data member locations.
This reverts commit r198385.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198389 91177308-0d34-0410-b5e6-96231b3b80d8
Apologies for the noise - we're seeing some Go failures with cgo
interacting with Clang's debug info due to this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198385 91177308-0d34-0410-b5e6-96231b3b80d8
r198196: Use a pointer to keep track of the skeleton unit for each normal unit and construct it up front.
r198199: Reapply r198196 with a fix to zero initialize the skeleton pointer.
r198202: Fix aranges and split dwarf by ensuring that the symbol and relocation back to the compile unit from the aranges section is to the skeleton unit and not the one in the dwo.
with a fix to use integer 0 for DW_AT_low_pc since the relocation to the text section symbol was causing issues with COFF. Accordingly remove addLocalLabelAddress and machinery since we're not currently using it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198222 91177308-0d34-0410-b5e6-96231b3b80d8
r198196: Use a pointer to keep track of the skeleton unit for each normal unit and construct it up front.
r198199: Reapply r198196 with a fix to zero initialize the skeleton pointer.
r198202: Fix aranges and split dwarf by ensuring that the symbol and relocation back to the compile unit from the aranges section is to the skeleton unit and not the one in the dwo.
They could be reproducible with explicit target.
llvm/lib/MC/WinCOFFObjectWriter.cpp:224: bool {anonymous}::COFFSymbol::should_keep() const: Assertion `Section->Number != -1 && "Sections with relocations must be real!"' failed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198208 91177308-0d34-0410-b5e6-96231b3b80d8
back to the compile unit from the aranges section is to the skeleton
unit and not the one in the dwo.
Do this by adding a method to grab a forwarded on local sym and local
section by querying the skeleton if one exists and using that. Add
a few tests to verify the relocations are back to the correct section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198202 91177308-0d34-0410-b5e6-96231b3b80d8
and construct it up front. Add address ranges at the end and a helper
routine so that we're not needlessly using an indirction in the case
of split dwarf.
Update testcases according to the new ordering of attributes on
the compile unit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198196 91177308-0d34-0410-b5e6-96231b3b80d8
This commit does not complete the type units feature - there are issues
around fission support (skeletal type units, pubtypes/pubnames) and
hashing of some types including those containing references to types in
other type units.
Originally committed as r197073 and reverted in r197079.
Recommitted as r197197 to reproduce the failure and reverted as r197199
Turns out there was unstable ordering in the type unit dumping code.
Fixed by using MapVector in DWARFContext to store the debug_types
comdat sections.
Recommitted as r197210 with a fix to dumping and reverted as r197211
because I was a bit gun shy and thought I saw a failure that turned out
to be unrelated.
So here we go - once more with feeling! \o/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197275 91177308-0d34-0410-b5e6-96231b3b80d8
This commit does not complete the type units feature - there are issues
around fission support (skeletal type units, pubtypes/pubnames) and
hashing of some types including those containing references to types in
other type units.
Originally committed as r197073 and reverted in r197079.
Recommitted as r197197 to reproduce the failure and reverted as r197199
Turns out there was unstable ordering in the type unit dumping code.
Fixed by using MapVector in DWARFContext to store the debug_types
comdat sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197210 91177308-0d34-0410-b5e6-96231b3b80d8
This commit does not complete the type units feature - there are issues
around fission support (skeletal type units, pubtypes/pubnames) and
hashing of some types including those containing references to types in
other type units.
Originally committed as r197073 and reverted in r197079.
This commit originally got jumbled up with another build-breaking commit
and I can't find the failures I thought this caused anymore.
Recommitting to hopefully get some clean buildbot results to work from.
I have a sneaking suspicion there's unstable output in the comdat group
output of MCStreamer...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197197 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r197073.
The test seems to be failing on some buildbots for unknown reasons.
Reverting until I can figure that out. If anyone's got a reproduction
(.s and .o together would be great) - I'd really appreciate it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197079 91177308-0d34-0410-b5e6-96231b3b80d8
This commit does not complete the type units feature - there are issues
around fission support (skeletal type units, pubtypes/pubnames) and
hashing of some types including those containing references to types in
other type units.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197073 91177308-0d34-0410-b5e6-96231b3b80d8
This simplifies reasoning about the code and enables simple navigation
from a skeleton to its full unit. (currently there are no type unit
skeletons, so the skeleton list doesn't have the same ID == index
property)
Eventually we should get rid of this ID and just store the labels we
need as the IDs are allowing this code to create difficult to
manage/understand associations (loops over non-skeletal units are
implicitly referencing their skeletal units during pub* emission, for
example). It may be necessary to have some kind of skeleton->full unit
association and a more direct pointer or similar device would be
preferable than an index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196600 91177308-0d34-0410-b5e6-96231b3b80d8
ARanges included even extern variables referenced by pointer non-type
template parameters even though that variable isn't part of this
compilation unit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195895 91177308-0d34-0410-b5e6-96231b3b80d8
Since type units aren't in the CUMap, use the DwarfUnits list to iterate
over units for tasks such as accelerator table building.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195776 91177308-0d34-0410-b5e6-96231b3b80d8
The dumper was only dumping one pubtypes set and it was /always/ dumping
one pubtypes set even when there were zero sets. Now that the dumper
correctly dumps zero, one, or many sets, we can update this test case to
test for the absolute absence of a set rather than a bogus/accidental
zero-valued set.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195706 91177308-0d34-0410-b5e6-96231b3b80d8
We are going to drop debug info without a version number or with a different
version number, to make sure we don't crash when we see bitcode files with
different debug info metadata format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195504 91177308-0d34-0410-b5e6-96231b3b80d8
section use the form DW_FORM_data4 whilst in Dwarf 4 and later they
use the form DW_FORM_sec_offset.
This patch updates the places where such attributes are generated to
use the appropriate form depending on the Dwarf version. The DIE entries
affected have the following tags:
DW_AT_stmt_list, DW_AT_ranges, DW_AT_location, DW_AT_GNU_pubnames,
DW_AT_GNU_pubtypes, DW_AT_GNU_addr_base, DW_AT_GNU_ranges_base
It also adds a hidden command line option "--dwarf-version=<uint>"
to llc which allows the version of Dwarf to be generated to override
what is specified in the metadata; this makes it possible to update
existing tests to check the debugging information generated for both
Dwarf 4 (the default) and Dwarf 3 using the same metadata.
Patch (slightly modified) by Keith Walker!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195391 91177308-0d34-0410-b5e6-96231b3b80d8
Emit DW_TAG_type_units into the debug_info section using compile unit
headers. This is bogus/unusable by debuggers, but testable and provides
more isolated review.
Subsequent patches will include support for type unit headers and
emission into the debug_types section, as well as comdat grouping the
types based on their hash. Also the CompileUnit type will be renamed
'Unit' and relevant portions pulled out into respective CompileUnit and
TypeUnit types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195166 91177308-0d34-0410-b5e6-96231b3b80d8
and update test cases accordingly.
This doesn't affect the output dumped using llvm-dwarfdump, but
readelf does now dump the debug_loc section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194898 91177308-0d34-0410-b5e6-96231b3b80d8
I hit some problems with future work due to the member subprogram of
'a_b's type having a subprogram (an implicit default ctor, !52 in the
pre-commit source) with no name. Clang now generates a name for such a
function but in this case doesn't even emit debug info for it as it is
unused (Clang never emits the body of the ctor, instead just emitting
memset if needed).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193892 91177308-0d34-0410-b5e6-96231b3b80d8
The point is to ensure that the attribute in question
(DW_AT_data_member_location) is associated with the prior tag, so ensure
that we don't see another tag starting between the intended tag and the
desired attribute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193884 91177308-0d34-0410-b5e6-96231b3b80d8
In a failed attempt to allow the gnu-public-names.ll test case to not
hardcode the size of the unit that the pubnames section referred to I've
at least managed to have unit headers and pubnames headers print out in
a similar style.
This failed to achieve the desired goal because the header in a unit
specifies the length of the unit without the length element of the
header whereas the length in the pubnames includes this element, so the
numbers are off by 4 bytes. I don't know of any arithmetic powers in
FileCheck so the test case can't simply say "CU_LENGTH + 4".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193872 91177308-0d34-0410-b5e6-96231b3b80d8
We add a map in DwarfDebug to map MDNodes that are shareable across CUs to the
corresponding DIEs: MDTypeNodeToDieMap. These DIEs can be shared across CUs,
that is why we keep the maps in DwarfDebug instead of CompileUnit.
We make the assumption that if a DIE is not added to an owner yet, we assume
it belongs to the current CU. Since DIEs for the type system are added to
their owners immediately after creation, and other DIEs belong to the current
CU, the assumption should be true.
A testing case is added to show that we only create a single DIE for a type
MDNode and we use ref_addr to refer to the type DIE.
We also add a testing case to show ref_addr relocations for non-darwin
platforms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193779 91177308-0d34-0410-b5e6-96231b3b80d8
after the DIE creation, we construct the context first.
Ensure that we create the context before we create a type so that we can add
the newly created type to the parent. Remove last use of addToContextOwner
now that it's not needed.
We use createAndAddDIE to wrap around "new DIE(". Now all shareable DIEs
should be added to their parents right after the creation.
Reviewed off-list by Eric, Thanks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193657 91177308-0d34-0410-b5e6-96231b3b80d8
Add a tag before the name attribute for readability. Use CHECK-NEXT
instead of CHECK-NOT followed by a CHECK. Add new lines to separate checking
of different DIEs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193629 91177308-0d34-0410-b5e6-96231b3b80d8
after the DIE creation, we construct the context first.
This touches creation of namespaces and global variables. The purpose is to
handle all DIE creations similarly: constructs the context first, then creates
the DIE and immediately adds the DIE to its parent.
We use createAndAddDIE to wrap around "new DIE(".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193589 91177308-0d34-0410-b5e6-96231b3b80d8
More patches will be submitted to convert "new DIE(" to use createAddAndDIE in
DwarfCompileUnit.cpp. This will simplify implementation of addDIEEntry where
we have to decide between ref4 and ref_addr, because DIEs that can be shared
across CU will be added to a CU already.
Reviewed off-list by Eric.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193567 91177308-0d34-0410-b5e6-96231b3b80d8
Found while adding type safety to the various DWARF enumerations (form,
attribute, tag, etc) that caused Clang to warn on an incompletely
covered switch. Converting the comment to a default/unreachable
uncovered this case of an unsupported form encoding. Seems we were
skipping fission strings entirely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193089 91177308-0d34-0410-b5e6-96231b3b80d8
like C++ should be the fully qualified names for the type.
Add a routine that does a language specific context walk to build
up the qualified name and use it when we add types/names to the
tables. Expand the gnu pubnames testcase as it's the most complex
to make sure that qualified types are also being added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192865 91177308-0d34-0410-b5e6-96231b3b80d8
1) Make sure we emit static member variables by checking
at the end of createGlobalVariableDIE rather than piecemeal
in the function.
(As a note, createGlobalVariableDIE needs rewriting.)
2) Make sure we use the definition rather than declaration DIE
for two things: a) determining linkage for gnu pubnames, and b)
as the address of the DIE for global variables.
(As a note, createGlobalVariableDIE really needs rewriting.)
Adjust the testcase to make sure we're checking the correct DIEs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192761 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the SelectionDAG scheduling preference to source
order. Soon, the SelectionDAG scheduler can be bypassed saving
a nice chunk of compile time.
Performance differences that result from this change are often a
consequence of register coalescing. The register coalescer is far from
perfect. Bugs can be filed for deficiencies.
On x86 SandyBridge/Haswell, the source order schedule is often
preserved, particularly for small blocks.
Register pressure is generally improved over the SD scheduler's ILP
mode. However, we are still able to handle large blocks that require
latency hiding, unlike the SD scheduler's BURR mode. MI scheduler also
attempts to discover the critical path in single-block loops and
adjust heuristics accordingly.
The MI scheduler relies on the new machine model. This is currently
unimplemented for AVX, so we may not be generating the best code yet.
Unit tests are updated so they don't depend on SD scheduling heuristics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192750 91177308-0d34-0410-b5e6-96231b3b80d8
In the case (shown in the attached test) where a member function
definition was emitted into debug info the following could occur:
1) build the debug info for the member function definition
2) in (1), build the debug info for the member function declaration
3) construct and add the member function declaration DIE
4) add it to its context
5) build its context (the type it is a member of)
6) construct the members and add them to the type
7) except don't add member functions because "getOrCreateSubprogram"
adds the function to its parent anyway
8) except we're only partway through building this subprogram
declaration so it hasn't been added yet - but we returned the partially
constructed DIE (since it's already in the MDNode->DIE mapping to avoid
infinitely recursing trying to create the member function DIE)
9) once the type is constructed, add the member function to it
10) now the members are out of order (the member function being defined
is listed as the last member, even though it was declared as the first)
To avoid this, construct the context of the subprogram DIE before we
query to see if it exists. That way we never end up creating it before
creating its context and ending up in this situation.
Alternatively, the type construction that visits/builds all the members
could call something like getOrCreateSubprogram, but that doesn't ever
do the "add to context" step. Then the type building code would always
be responsible for adding members (and the subprogram "addToContextDIE"
would no-op because the context building would have added the subprogram
declaration to the type/context DIE already).
(the test cases updated were overly-sensitive to offsets or abbreviation
numbers. We don't have a nice way to make these tests more robust as yet
- multiline FileCheck matches would be required)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191939 91177308-0d34-0410-b5e6-96231b3b80d8
Changed the dwarf aranges code to not use getLabelEndName, as it turns out it's not reliable to call that given user-defined section names. Section names can have characters in that aren't representable as symbol names.
The dwarf-aranges test case has been updated to include a special character, to check this.
This fixes pr17416.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191932 91177308-0d34-0410-b5e6-96231b3b80d8
