The number of tail call to loop conversions remains the same (1618 by my count).
The new algorithm does a local scan over the use-def chains to identify local "alloca-derived" values, as well as points where the alloca could escape. Then, a visit over the CFG marks blocks as being before or after the allocas have escaped, and annotates the calls accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208017 91177308-0d34-0410-b5e6-96231b3b80d8
Visibility is meaningless when the linkage is local. Change
`-internalize` to reset the visibility to `default`.
<rdar://problem/16141113>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207979 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise we use the same threshold as for complete unrolling, which is
way too high. This made us unroll any loop smaller than 150 instructions
by 8 times, but only if someone specified -march=core2 or better,
which happens to be the default on darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207940 91177308-0d34-0410-b5e6-96231b3b80d8
When can't assume a vectorized tree is rooted in an instruction. The IRBuilder
could have constant folded it. When we rebuild the build_vector (the series of
InsertElement instructions) use the last original InsertElement instruction. The
vectorized tree root is guaranteed to be before it.
Also, we can't assume that the n-th InsertElement inserts the n-th element into
a vector.
This reverts r207746 which reverted the revert of the revert of r205018 or so.
Fixes the test case in PR19621.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207939 91177308-0d34-0410-b5e6-96231b3b80d8
There is no point in creating it if we're not going to vectorize
anything. Creating the map is expensive as it creates large values.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207916 91177308-0d34-0410-b5e6-96231b3b80d8
There are public functions that mutate various members as well as
another private member already, so make all the members private to
avoid the discontinuity and add accessors for the values. Should
be no functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207868 91177308-0d34-0410-b5e6-96231b3b80d8
This moves most of GlobalOpt's constructor optimization
code out of GlobalOpt into Transforms/Utils/CDtorUtils.{h,cpp}. The
public interface is a single function OptimizeGlobalCtorsList() that
takes a predicate returning which constructors to remove.
GlobalOpt calls this with a function that statically evaluates all
constructors, just like it did before. This part of the change is
behavior-preserving.
Also add a call to this from GlobalDCE with a filter that removes global
constructors that contain a "ret" instruction and nothing else – this
fixes PR19590.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207856 91177308-0d34-0410-b5e6-96231b3b80d8
address to AnalyzeLoadFromClobberingLoad. This fixes a bug in load-PRE where
PRE is applied to a load that is not partially redundant.
<rdar://problem/16638765>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207853 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization merges the common part of a group of GEPs, so we can compute
each pointer address by adding a simple offset to the common part.
The optimization is currently only enabled for the NVPTX backend, where it has
a large payoff on some benchmarks.
Review: http://reviews.llvm.org/D3462
Patch by Jingyue Wu.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207783 91177308-0d34-0410-b5e6-96231b3b80d8
=[
Turns out that this was the root cause of PR19621. We found a crasher
only recently (likely due to improvements elsewhere in the SLP
vectorizer) but the reduced test case failed all the way back to here.
I've confirmed that reverting this patch both fixes the reduced test
case in PR19621 and the actual source file that led to it, so it seems
to really be rooted here. I've replied to the commit thread with
discussion of my (feeble) attempts to debug this. Didn't make it very
far, so reverting now that we have a good test case so that things can
get back to healthy while the debugging carries on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207746 91177308-0d34-0410-b5e6-96231b3b80d8
Not all address taken blocks get inlined. The reason is
that a blocks new address is known only when it is cloned. But e.g.
a branch instruction in a different block could need that address earlier
while it gets cloned. The solution is to collect the set of all
blocks that can potentially get inlined and compute a new block address
up front. Then clone and cleanup.
rdar://16427209
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207713 91177308-0d34-0410-b5e6-96231b3b80d8
The instcomine logic to handle vpermilvar's pd and 256 variants was incorrect.
The _256 variants have indexes into the individual 128 bit lanes and in all
cases it also has to mask out unused bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207577 91177308-0d34-0410-b5e6-96231b3b80d8
This patch changes the vectorization remarks to also inform when
vectorization is possible but not beneficial.
Added tests to exercise some loop remarks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207574 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This calls emitOptimizationRemark from the loop unroller and vectorizer
at the point where they make a positive transformation. For the
vectorizer, it reports vectorization and interleave factors. For the
loop unroller, it reports all the different supported types of
unrolling.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3456
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207528 91177308-0d34-0410-b5e6-96231b3b80d8
clang directly from the LLVM test suite! That doesn't work. I've
followed up on the review thread to try and get a viable solution sorted
out, but trying to get the tree clean here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207462 91177308-0d34-0410-b5e6-96231b3b80d8
mapping from a basic block to an incoming value, either for removal or
just lookup, is linear in the number of predecessors, and we were doing
this for every entry in the 'Preds' list which is in many cases almost
all of them!
Unfortunately, the fixes are quite ugly. PHI nodes just don't make this
operation easy. The efficient way to fix this is to have a clever
'remove_if' operation on PHI nodes that lets us do a single pass over
all the incoming values of the original PHI node, extracting the ones we
care about. Then we could quickly construct the new phi node from this
list. This would remove the remaining underlying quadratic movement of
unrelated incoming values and the need for silly backwards looping to
"minimize" how often we hit the quadratic case.
This is the last obvious fix for PR19499. It shaves another 20% off the
compile time for me, and while UpdatePHINodes remains in the profile,
most of the time is now stemming from the well known inefficiencies of
LVI and jump threading.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207409 91177308-0d34-0410-b5e6-96231b3b80d8
more than 1 instruction. The caller need to be aware of this
and adjust instruction iterators accordingly.
rdar://16679376
Repaired r207302.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207309 91177308-0d34-0410-b5e6-96231b3b80d8
more than 1 instruction. The caller need to be aware of this
and adjust instruction iterators accordingly.
rdar://16679376
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207302 91177308-0d34-0410-b5e6-96231b3b80d8
right intrinsics.
A packed logical shift right with a shift count bigger than or equal to the
element size always produces a zero vector. In all other cases, it can be
safely replaced by a 'lshr' instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207299 91177308-0d34-0410-b5e6-96231b3b80d8
Consider this use from the new testcase:
LSR Use: Kind=ICmpZero, Offsets={0}, widest fixup type: i32
reg({1000,+,-1}<nw><%for.body>)
-3003 + reg({3,+,3}<nw><%for.body>)
-1001 + reg({1,+,1}<nuw><nsw><%for.body>)
-1000 + reg({0,+,1}<nw><%for.body>)
-3000 + reg({0,+,3}<nuw><%for.body>)
reg({-1000,+,1}<nw><%for.body>)
reg({-3000,+,3}<nsw><%for.body>)
This is the last use we consider for a solution in SolveRecurse, so CurRegs is
a large set. (CurRegs is the set of registers that are needed by the
previously visited uses in the in-progress solution.)
ReqRegs is {
{3,+,3}<nw><%for.body>,
{1,+,1}<nuw><nsw><%for.body>
}
This is the intersection of the regs used by any of the formulas for the
current use and CurRegs.
Now, the code requires a formula to contain *all* these regs (the comment is
simply wrong), otherwise the formula is immediately disqualified. Obviously,
no formula for this use contains two regs so they will all get disqualified.
The fix modifies the check to allow the formula in this case. The idea is
that neither of these formulae is introducing any new registers which is the
point of this early pruning as far as I understand.
In terms of set arithmetic, we now allow formulas whose used regs are a subset
of the required regs not just the other way around.
There are few more loops in the test-suite that are now successfully LSRed. I
have benchmarked those and found very minimal change.
Fixes <rdar://problem/13965777>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207271 91177308-0d34-0410-b5e6-96231b3b80d8
