Extend LinkModules to pass a ValueMaterializer to RemapInstruction and friends to lazily create Functions for lazily linked globals. This is a big win when linking small modules with large (mostly unused) library modules.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182776 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for the CRJ and CGRJ instructions. Support for
the immediate forms will be a separate patch.
The architecture has a large number of comparison instructions. I think
it's generally better to concentrate on using the "best" comparison
instruction first and foremost, then only use something like CRJ if
CR really was the natual choice of comparison instruction. The patch
therefore opportunistically converts separate CR and BRC instructions
into a single CRJ while emitting instructions in ISelLowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182764 91177308-0d34-0410-b5e6-96231b3b80d8
When -ffast-math is in effect (on Linux, at least), clang defines
__FINITE_MATH_ONLY__ > 0 when including <math.h>. This causes the
preprocessor to include <bits/math-finite.h>, which renames the sqrt functions.
For instance, "sqrt" is renamed as "__sqrt_finite".
This patch adds the 3 new names in such a way that they will be treated
as equivalent to their respective original names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182739 91177308-0d34-0410-b5e6-96231b3b80d8
isConsecutiveLS is a slightly more general form of
SelectionDAG::isConsecutiveLoad. Aside from also handling stores, it also does
not assume equality of the chain operands is necessary. In the case of the PPC
backend, this chain condition is checked in a more general way by the
surrounding code.
Mostly, this part of the refactoring in preparation for supporting optimized
unaligned stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182723 91177308-0d34-0410-b5e6-96231b3b80d8
When expanding unaligned Altivec loads, we use the decremented offset trick to
prevent page faults. Unfortunately, if we have a sequence of consecutive
unaligned loads, this leads to suboptimal code generation because the 'extra'
load from the first unaligned load can be combined with the base load from the
second (but only if the decremented offset trick is not used for the first).
Search up and down the chain, through loads and token factors, looking for
consecutive loads, and if one is found, don't use the offset reduction trick.
These duplicate loads are later combined to yield the desired sequence (in the
future, we might want a more-powerful chain search, but that will require some
changes to allow the combiner routines to access the AA object).
This should complete the initial implementation of the optimized unaligned
Altivec load expansion. There is some refactoring that should be done, but
that will happen when the unaligned store expansion is added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182719 91177308-0d34-0410-b5e6-96231b3b80d8
The lvsl permutation control instruction is a function only of the alignment of
the pointer operand (relative to the 16-byte natural alignment of Altivec
vectors). As a result, multiple lvsl intrinsics where the operands differ by a
multiple of 16 can be combined.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182708 91177308-0d34-0410-b5e6-96231b3b80d8
Change SelectionDAG::getXXXNode() interfaces as well as call sites of
these functions to pass in SDLoc instead of DebugLoc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182703 91177308-0d34-0410-b5e6-96231b3b80d8
Use a field in the SelectionDAGNode object to track its IR ordering.
This adds fields and utility classes without changing existing
interfaces or functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182701 91177308-0d34-0410-b5e6-96231b3b80d8
Add a stringize method to make dumping a bit easier, and add a testcase
exercising a few different paths.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182692 91177308-0d34-0410-b5e6-96231b3b80d8
Altivec only directly supports aligned loads, but the loads have a strange
property: If given an unaligned address, they truncate the address to the next
lower aligned address, and load from there. This property, along with an extra
load and some special-purpose permutation-control instructions that generate
the appropriate permutations from the original unaligned address, allow
efficient lowering of aligned loads. This code uses the trick explained in the
Apple Velocity Engine optimization overview document to prevent the needed
extra load from possibly causing a page fault if the original address happens
to be aligned.
As noted in the FIXMEs, there are several additional optimizations that can be
performed to reduce the cost of these loads even more. These will be
implemented in future commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182691 91177308-0d34-0410-b5e6-96231b3b80d8
- Ressurect old MCDisassemble API to soften transition.
- Extend MCTargetDesc to set target specific symbolizer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182688 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, an invalid instruction like:
foo %r1, %r0
would generate the rather odd error message:
....: error: unknown token in expression
foo %r1, %r0
^
We now get the more informative:
....: error: invalid instruction
foo %r1, %r0
^
The same would happen if an address were used where a register was expected.
We now get "invalid operand for instruction" instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182644 91177308-0d34-0410-b5e6-96231b3b80d8
The idea is to make sure that:
(1) "register expected" is restricted to cases where ParseRegister()
is called and the token obviously isn't a register.
(2) "invalid register" is restricted to cases where a register-like "%..."
sequence is found, but the "..." makes no sense.
(3) the generic "invalid operand for instruction" is used in cases where
the wrong register type is used (GPR instead of FPR, etc.).
(4) the new "invalid register pair" is used if the register has the right type,
but is not a valid register pair.
Testing of (1)-(3) is now restricted to regs-bad.s. It uses a representative
instruction for each register class to make sure that only registers from
that class are accepted.
(4) is tested by both regs-bad.s (which checks all invalid register pairs)
and insn-bad.s (which tests one invalid pair for each instruction that
requires a pair).
While there, I changed "Number" to "Num" for consistency with the
operand class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182643 91177308-0d34-0410-b5e6-96231b3b80d8
as the BinaryOperator, *not* in the block where the IRBuilder is currently
inserting into. Fixes a bug where scalarizePHI would create instructions
that would not dominate all uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182639 91177308-0d34-0410-b5e6-96231b3b80d8
Other than recognizing the attribute, the patch does little else.
It changes the branch probability analyzer so that edges into
blocks postdominated by a cold function are given low weight.
Added analysis and code generation tests. Added documentation for the
new attribute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182638 91177308-0d34-0410-b5e6-96231b3b80d8
There was exactly one caller using this API right, the others were relying on
specific behavior of the default implementation. Since it's too hard to use it
right just remove it and standardize on the default behavior.
Defines away PR16132.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182636 91177308-0d34-0410-b5e6-96231b3b80d8
In these builds, the asserts() are completely compiled out of the code
leaving "End" unused. Directly accessing it, should not have a
performance impact, as it is just a data member.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182634 91177308-0d34-0410-b5e6-96231b3b80d8
This patch builds on some existing code to do CFG reconstruction from
a disassembled binary:
- MCModule represents the binary, and has a list of MCAtoms.
- MCAtom represents either disassembled instructions (MCTextAtom), or
contiguous data (MCDataAtom), and covers a specific range of addresses.
- MCBasicBlock and MCFunction form the reconstructed CFG. An MCBB is
backed by an MCTextAtom, and has the usual successors/predecessors.
- MCObjectDisassembler creates a module from an ObjectFile using a
disassembler. It first builds an atom for each section. It can also
construct the CFG, and this splits the text atoms into basic blocks.
MCModule and MCAtom were only sketched out; MCFunction and MCBB were
implemented under the experimental "-cfg" llvm-objdump -macho option.
This cleans them up for further use; llvm-objdump -d -cfg now generates
graphviz files for each function found in the binary.
In the future, MCObjectDisassembler may be the right place to do
"intelligent" disassembly: for example, handling constant islands is just
a matter of splitting the atom, using information that may be available
in the ObjectFile. Also, better initial atom formation than just using
sections is possible using symbols (and things like Mach-O's
function_starts load command).
This brings two minor regressions in llvm-objdump -macho -cfg:
- The printing of a relocation's referenced symbol.
- An annotation on loop BBs, i.e., which are their own successor.
Relocation printing is replaced by the MCSymbolizer; the basic CFG
annotation will be superseded by more related functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182628 91177308-0d34-0410-b5e6-96231b3b80d8
This is a basic first step towards symbolization of disassembled
instructions. This used to be done using externally provided (C API)
callbacks. This patch introduces:
- the MCSymbolizer class, that mimics the same functions that were used
in the X86 and ARM disassemblers to symbolize immediate operands and
to annotate loads based off PC (for things like c string literals).
- the MCExternalSymbolizer class, which implements the old C API.
- the MCRelocationInfo class, which provides a way for targets to
translate relocations (either object::RelocationRef, or disassembler
C API VariantKinds) to MCExprs.
- the MCObjectSymbolizer class, which does symbolization using what it
finds in an object::ObjectFile. This makes simple symbolization (with
no fancy relocation stuff) work for all object formats!
- x86-64 Mach-O and ELF MCRelocationInfos.
- A basic ARM Mach-O MCRelocationInfo, that provides just enough to
support the C API VariantKinds.
Most of what works in otool (the only user of the old symbolization API
that I know of) for x86-64 symbolic disassembly (-tvV) works, namely:
- symbol references: call _foo; jmp 15 <_foo+50>
- relocations: call _foo-_bar; call _foo-4
- __cf?string: leaq 193(%rip), %rax ## literal pool for "hello"
Stub support is the main missing part (because libObject doesn't know,
among other things, about mach-o indirect symbols).
As for the MCSymbolizer API, instead of relying on the disassemblers
to call the tryAdding* methods, maybe this could be done automagically
using InstrInfo? For instance, even though PC-relative LEAs are used
to get the address of string literals in a typical Mach-O file, a MOV
would be used in an ELF file. And right now, the explicit symbolization
only recognizes PC-relative LEAs. InstrInfo should have already have
most of what is needed to know what to symbolize, so this can
definitely be improved.
I'd also like to remove object::RelocationRef::getValueString (it seems
only used by relocation printing in objdump), as simply printing the
created MCExpr is definitely enough (and cleaner than string concats).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182625 91177308-0d34-0410-b5e6-96231b3b80d8
Now that there is no longer any distinction between symbolLo
and symbolHi operands in either printing, encoding, or parsing,
the operand types can be removed in favor of simply using
s16imm.
This completes the patch series to decouple lo/hi operand part
processing from the particular instruction whose operand it is.
No change in code generation expected from this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182618 91177308-0d34-0410-b5e6-96231b3b80d8
- move AsmWriter.h from public headers into lib
- marked all AssemblyWriter functions as non-virtual; no need to override them
- DebugIR now "plugs into" AssemblyWriter with an AssemblyAnnotationWriter helper
- exposed flags to control hiding of a) debug metadata b) debug intrinsic calls
C/R: Paul Redmond
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182617 91177308-0d34-0410-b5e6-96231b3b80d8
When targeting the Darwin assembler, we need to generate markers ha16() and
lo16() to designate the high and low parts of a (symbolic) immediate. This
is necessary not just for plain symbols, but also for certain symbolic
expression, typically along the lines of ha16(A - B). The latter doesn't
work when simply using VariantKind flags on the symbol reference.
This is why the current back-end uses hacks (explicitly called out as such
via multiple FIXMEs) in the symbolLo/symbolHi print methods.
This patch uses target-defined MCExpr codes to represent the Darwin
ha16/lo16 constructs, following along the lines of the equivalent solution
used by the ARM back end to handle their :upper16: / :lower16: markers.
This allows us to get rid of special handling both in the symbolLo/symbolHi
print method and in the common code MCExpr::print routine. Instead, the
ha16 / lo16 markers are printed simply in a custom print routine for the
target MCExpr types. (As a result, the symbolLo/symbolHi print methods
can now replaced by a single printS16ImmOperand routine that also handles
symbolic operands.)
The patch also provides a EvaluateAsRelocatableImpl routine to handle
ha16/lo16 constructs. This is not actually used at the moment by any
in-tree code, but is provided as it makes merging into David Fang's
out-of-tree Mach-O object writer simpler.
Since there is no longer any need to treat VK_PPC_GAS_HA16 and
VK_PPC_DARWIN_HA16 differently, they are merged into a single
VK_PPC_ADDR16_HA (and likewise for the _LO16 types).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182616 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the @llvm.readcyclecounter intrinsic as the specific
MRC instruction specified in the ARM manuals for CPUs with the Power
Management extensions.
Older CPUs had slightly different methods which may also have to be
implemented eventually, but this should cover all v7 cases.
rdar://problem/13939186
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182603 91177308-0d34-0410-b5e6-96231b3b80d8
Performance monitors, including a basic cycle counter, are an official
extension in the ARMv7 specification. This adds support for enabling and
disabling them, orthogonally from CPU selection.
rdar://problem/13939186
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182602 91177308-0d34-0410-b5e6-96231b3b80d8
Now that the LiveDebugVariables pass is running *after* register
coalescing, the ConnectedVNInfoEqClasses class needs to deal with
DBG_VALUE instructions.
This only comes up when rematerialization during coalescing causes the
remaining live range of a virtual register to separate into two
connected components.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182592 91177308-0d34-0410-b5e6-96231b3b80d8
The error was:
error: non-constant-expression cannot be narrowed from type 'long long' to 'long' in initializer list [-Wc++11-narrowing]
MI.getOperand(6).getImm() & 0x1F,
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182584 91177308-0d34-0410-b5e6-96231b3b80d8