and interval table. Reduces output HTML file sizes by ~80% in my test cases.
Also fix access of private member type by << operator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108823 91177308-0d34-0410-b5e6-96231b3b80d8
Updated renderer to use allocation information from VirtRegMap (if
available) to render spilled intervals differently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108815 91177308-0d34-0410-b5e6-96231b3b80d8
loop, for the reasons in the comments. This is a
major win on 253.perlbmk on ARM Darwin. I expect it
to be a good heuristic in general, but it's possible
some things will regress; I'll be watching.
7940152.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108792 91177308-0d34-0410-b5e6-96231b3b80d8
update the current basic block in addition to the current insert
position, so that they remain consistent. This fixes rdar://8204072.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108765 91177308-0d34-0410-b5e6-96231b3b80d8
- Unfortunate, but necessary for now to handle subtarget instruction matching. Eventually we should factor out the lower level target machine information so we don't need to do this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108664 91177308-0d34-0410-b5e6-96231b3b80d8
I am assured by people more knowledgeable than me that there are no rounding issues in eliminating this.
This fixed <rdar://problem/8197504>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108639 91177308-0d34-0410-b5e6-96231b3b80d8
Still very much under development. Comments and fixes will be forthcoming.
(This commit includes some small tweaks to LiveIntervals & LoopInfo to support the splitter)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108615 91177308-0d34-0410-b5e6-96231b3b80d8
any command line paramater changed the register allocation produced by
PBQP.
Turns out variety is not the spice of life.
Fixed some comparators, added others. All good now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108613 91177308-0d34-0410-b5e6-96231b3b80d8
void foo() { __builtin_unreachable(); }
It will output the following on Darwin X86:
_func1:
Leh_func_begin0:
pushq %rbp
Ltmp0:
movq %rsp, %rbp
Ltmp1:
Leh_func_end0:
This prolog adds a new Call Frame Information (CFI) row to the FDE with an
address that is not within the address range of the code it describes -- part is
equal to the end of the function -- and therefore results in an invalid EH
frame. If we emit a nop in this situation, then the CFI row is now within the
address range.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108568 91177308-0d34-0410-b5e6-96231b3b80d8
since it doesn't work for front-ends which don't emit column information
(which includes llvm-gcc in its present configuration), and doesn't
work for clang for K&R style variables where the variables are declared
in a different order from the parameter list.
Instead, make a separate pass through the instructions to collect the
llvm.dbg.declare instructions in order. This ensures that the debug
information for variables is emitted in this order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108538 91177308-0d34-0410-b5e6-96231b3b80d8
occasions, caused code to be generated in a different order.
All cases I've seen involved float softening in the type
legalizer, and this could be perhaps be fixed there, but
it's better not to generate things differently in the first
place. 7797940 (6/29/2010..7/15/2010).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108484 91177308-0d34-0410-b5e6-96231b3b80d8
the function. We'll just turn it into a "trap" instruction instead.
The problem with not handling this is that it might generate a prologue without
the equivalent epilogue to go with it:
$ cat t.ll
define void @foo() {
entry:
unreachable
}
$ llc -o - t.ll -relocation-model=pic -disable-fp-elim -unwind-tables
.section __TEXT,__text,regular,pure_instructions
.globl _foo
.align 4, 0x90
_foo: ## @foo
Leh_func_begin0:
## BB#0: ## %entry
pushq %rbp
Ltmp0:
movq %rsp, %rbp
Ltmp1:
Leh_func_end0:
...
The unwind tables then have bad data in them causing all sorts of problems.
Fixes <rdar://problem/8096481>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108473 91177308-0d34-0410-b5e6-96231b3b80d8
-enable-no-nans-fp-math and -enable-no-infs-fp-math. All of the current codegen fp math optimizations only care whether the fp arithmetics arguments and results can never be NaN.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108465 91177308-0d34-0410-b5e6-96231b3b80d8
to keep "Text" in sync with the "pure instructions" section attribute.
Lack of this attribute was preventing the assembler from emitting
multibyte noops instructions for templates (and inlines, and other
coalesced stuff) and was causing the assembler to mismatch .o files.
This fixes rdar://8018335
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108461 91177308-0d34-0410-b5e6-96231b3b80d8
independent of the order that isel happens to visit the dbg_declare
intrinsics. This fixes a bug in which the formal arguments were
being printed in reverse order, now that fast isel is going bottom up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108369 91177308-0d34-0410-b5e6-96231b3b80d8
constants, since they may not be emited near the other instructions
which get the same line, and this confuses debug info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108302 91177308-0d34-0410-b5e6-96231b3b80d8
LiveInterval::overlapsFrom dereferences end() if it is called on an empty
interval.
It would be reasonable to just return false - an empty interval doesn't overlap
anything, but I want to know who is doing it first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108264 91177308-0d34-0410-b5e6-96231b3b80d8
they already have one.
This fixes the himenobmtxpa miscompilation on ARM.
The PostRA scheduler got confused by the double memoperand and hoisted a stack
slot load above a store to the same slot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108219 91177308-0d34-0410-b5e6-96231b3b80d8
AggressiveAntiDepBreaker should not be using getPhysicalRegisterRegClass. An
instruction might be using a register that can only be replaced with one from
a subclass of getPhysicalRegisterRegClass.
With this patch we use getMinimalPhysRegClass. This is correct, but
conservative. We should check the uses of the register and select the
largest register class that can be used in all of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108122 91177308-0d34-0410-b5e6-96231b3b80d8
physical register can be allocated in the class of the virtual are sufficient.
I think that the test for virtual registers is more strict than it needs to be,
it should be possible to coalesce two virtual registers the class of one
is a subclass of the other.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108118 91177308-0d34-0410-b5e6-96231b3b80d8
getMinimalPhysRegClass. It was used to produce spills, and it is better to
use the most specific class if possible.
Update getLoadStoreRegOpcode to handle GR32_AD.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108115 91177308-0d34-0410-b5e6-96231b3b80d8
Targets must now implement TargetInstrInfo::copyPhysReg instead. There is no
longer a default implementation forwarding to copyRegToReg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108095 91177308-0d34-0410-b5e6-96231b3b80d8
The first one was used just to call isSafeToMoveRegClassDefs. In
general, using a more specific reg class is better, in practice only
x86 implements that method and the results are always the same.
The second one is in FindFreeRegister and is used to check if a register
is in a register class, a much more direct call to contains is better as
it should cover more cases and is faster.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108093 91177308-0d34-0410-b5e6-96231b3b80d8
assert()s, switching to void-casts. Removed an unneeded Compiler.h include as
a result. There are two other uses in LLVM, but they're not due to assert()s,
so I've left them alone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108088 91177308-0d34-0410-b5e6-96231b3b80d8
correct alignment information, which simplifies ExpandRes_VAARG a bit.
The patch introduces a new alignment information to TargetLoweringInfo. This is
needed since the two natural candidates cannot be used:
* The 's' in target data: If this is set to the minimal alignment of any
argument, getCallFrameTypeAlignment would return 4 for doubles on ARM for
example.
* The getTransientStackAlignment method. It is possible for an architecture to
have argument less aligned than what we maintain the stack pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108072 91177308-0d34-0410-b5e6-96231b3b80d8
The remaining copyRegToReg calls actually check the return value (shock!), so we
cannot trivially replace them with COPY instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108069 91177308-0d34-0410-b5e6-96231b3b80d8
if a block is split (by a custom inserter), the insert point may be in a
different block than it was originally. This fixes 32-bit llvm-gcc
bootstrap builds, and I haven't been able to reproduce it otherwise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108060 91177308-0d34-0410-b5e6-96231b3b80d8
ScheduleDAGEmit, TwoAddressLowering, and PHIElimination.
This switches the bulk of register copies to using COPY, but many less used
copyRegToReg calls remain.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108050 91177308-0d34-0410-b5e6-96231b3b80d8
- Check getBytesToPopOnReturn().
- Eschew ST0 and ST1 for return values.
- Fix the PIC base register initialization so that it doesn't ever
fail to end up the top of the entry block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108039 91177308-0d34-0410-b5e6-96231b3b80d8
inserted in a MBB, and return an already inserted MI.
This target API change is necessary to allow foldMemoryOperand to call
storeToStackSlot and loadFromStackSlot when folding a COPY to a stack slot
reference in a target independent way.
The foldMemoryOperandImpl hook is going to change in the same way, but I'll wait
until COPY folding is actually implemented. Most targets only fold copies and
won't need to specialize this hook at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107991 91177308-0d34-0410-b5e6-96231b3b80d8
U utils/TableGen/FastISelEmitter.cpp
--- Reverse-merging r107943 into '.':
U test/CodeGen/X86/fast-isel.ll
U test/CodeGen/X86/fast-isel-loads.ll
U include/llvm/Target/TargetLowering.h
U include/llvm/Support/PassNameParser.h
U include/llvm/CodeGen/FunctionLoweringInfo.h
U include/llvm/CodeGen/CallingConvLower.h
U include/llvm/CodeGen/FastISel.h
U include/llvm/CodeGen/SelectionDAGISel.h
U lib/CodeGen/LLVMTargetMachine.cpp
U lib/CodeGen/CallingConvLower.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
U lib/CodeGen/SelectionDAG/FunctionLoweringInfo.cpp
U lib/CodeGen/SelectionDAG/FastISel.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
U lib/CodeGen/SelectionDAG/ScheduleDAGSDNodes.cpp
U lib/CodeGen/SelectionDAG/InstrEmitter.cpp
U lib/CodeGen/SelectionDAG/TargetLowering.cpp
U lib/Target/XCore/XCoreISelLowering.cpp
U lib/Target/XCore/XCoreISelLowering.h
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86ISelLowering.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107987 91177308-0d34-0410-b5e6-96231b3b80d8
disabled and then never turned back on again. Adjust some tests, one because
this change avoids an unnecessary instruction, and the other to make it
continue testing what it was intended to test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107941 91177308-0d34-0410-b5e6-96231b3b80d8
