DAG cycle detection is only enabled with ENABLE_EXPENSIVE_CHECKS. However we
can run it just before we would crash in order to provide more informative
diagnostics.
Now in addition to the "Overran sorted position" message we also get the Node
printed if a cycle was detected.
Tested by building several configs: Debug+Assert, Debug+Assert+Check (this is
ENABLE_EXPENSIVE_CHECKS), Release+Assert and Release. Also tried that the
AssignTopologicalOrder assert produces the expected results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209977 91177308-0d34-0410-b5e6-96231b3b80d8
Pass the DAG down to checkForCycles from all callers where we have it. This
allows target-specific nodes to be printed properly.
Also print some missing newlines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209976 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the backend how to simplify/canonicalize dag node
sequences normally introduced by the backend when promoting certain dag nodes
with illegal vector type.
This patch adds two new combine rules:
1) fold (shuffle (bitcast (BINOP A, B)), Undef, <Mask>) ->
(shuffle (BINOP (bitcast A), (bitcast B)), Undef, <Mask>)
2) fold (BINOP (shuffle (A, Undef, <Mask>)), (shuffle (B, Undef, <Mask>))) ->
(shuffle (BINOP A, B), Undef, <Mask>).
Both rules are only triggered on the type-legalized DAG.
In particular, rule 1. is a target specific combine rule that attempts
to sink a bitconvert into the operands of a binary operation.
Rule 2. is a target independet rule that attempts to move a shuffle
immediately after a binary operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209930 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If both vector args to vselect are concat_vectors and the condition is
constant and picks half a vector from each argument, convert the vselect
into a concat_vectors.
Added a test.
The ConvertSelectToConcatVector is assuming it doesn't get vselects with
arguments of, for example, <undef, undef, true, true>. Those get taken
care of in the checks above its call.
Reviewers: nadav, delena, grosbach, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3916
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209929 91177308-0d34-0410-b5e6-96231b3b80d8
For MIPS, we have to encode the personality routine with
an indirect pointer to absptr; otherwise, some link warning
warning will be raised, and the program might crash in some
early MIPS Android device.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209907 91177308-0d34-0410-b5e6-96231b3b80d8
Unordered is strictly weaker than monotonic, so if the latter doesn't have any
barriers then the former certainly shouldn't.
rdar://problem/16548260
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209901 91177308-0d34-0410-b5e6-96231b3b80d8
The C and C++ semantics for compare_exchange require it to return a bool
indicating success. This gets mapped to LLVM IR which follows each cmpxchg with
an icmp of the value loaded against the desired value.
When lowered to ldxr/stxr loops, this extra comparison is redundant: its
results are implicit in the control-flow of the function.
This commit makes two changes: it replaces that icmp with appropriate PHI
nodes, and then makes sure earlyCSE is called after expansion to actually make
use of the opportunities revealed.
I've also added -{arm,aarch64}-enable-atomic-tidy options, so that
existing fragile tests aren't perturbed too much by the change. Many
of them either rely on undef/unreachable too pervasively to be
restored to something well-defined (particularly while making sure
they test the same obscure assert from many years ago), or depend on a
particular CFG shape, which is disrupted by SimplifyCFG.
rdar://problem/16227836
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209883 91177308-0d34-0410-b5e6-96231b3b80d8
never used again and updating the abstract variable for each inlined
instance of it was questionable in the first place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209829 91177308-0d34-0410-b5e6-96231b3b80d8
An address only use of an extract element of a load can be simplified to a
load. Without this the result of the extract element is spilled to the
stack so that an address is available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209788 91177308-0d34-0410-b5e6-96231b3b80d8
No test because no in-tree targets change the bitwidth of the
setcc type depending on the bitwidth of the compared type.
Patch by Ke Bai
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209771 91177308-0d34-0410-b5e6-96231b3b80d8
This matches gcc's behavior. It also seems natural given that aliases
contain other properties that govern how it is accessed (linkage,
visibility, dll storage).
Clang still has to be updated to expose this feature to C.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209759 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r208640 (I've just XFAILed the test) because it broke ppc64/Linux
self-hosting. Because nearly every regression test triggers a segfault, I hope
this will be easy to fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209747 91177308-0d34-0410-b5e6-96231b3b80d8
Use more straightforward way to represent the set of instruction
ranges where the location of a user variable is defined - vector of pairs
of instructions (defining start/end of each range),
instead of a flattened vector of instructions where some instructions
are supposed to start the range, and the rest are supposed to "clobber" it.
Simplify the code which generates actual .debug_loc entries.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209698 91177308-0d34-0410-b5e6-96231b3b80d8
Current implementation of calculateDbgValueHistory already creates the
keys in the expected order (user variables are listed in order of appearance),
and should do so later by contract.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209690 91177308-0d34-0410-b5e6-96231b3b80d8
I'm not sure exactly where/how we end up with an abstract DbgVariable
with a null DIE, but we do... looking into it & will add a test and/or
fix when I figure it out.
Currently shows up in selfhost or compiler-rt builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209683 91177308-0d34-0410-b5e6-96231b3b80d8
Originally committed in r207717, I clearly didn't look very closely at
the code to understand how existing things were working...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209680 91177308-0d34-0410-b5e6-96231b3b80d8
After much puppetry, here's the major piece of the work to ensure that
even when a concrete definition preceeds all inline definitions, an
abstract definition is still created and referenced from both concrete
and inline definitions.
Variables are still broken in this case (see comment in
dbg-value-inlined-parameter.ll test case) and will be addressed in
follow up work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209677 91177308-0d34-0410-b5e6-96231b3b80d8
A further step to correctly emitting concrete out of line definitions
preceeding inlined instances of the same program.
To do this, emission of subprograms must be delayed until required since
we don't know which (abstract only (if there's no out of line
definition), concrete only (if there are no inlined instances), or both)
DIEs are required at the start of the module.
To reduce the test churn in the following commit that actually fixes the
bug, this commit introduces the lazy DIE construction and cleans up test
cases that are impacted by the changes in the resulting DIE ordering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209675 91177308-0d34-0410-b5e6-96231b3b80d8
This is a precursor to fixing inlined debug info where the concrete,
out-of-line definition may preceed any inlined usage. To cope with this,
the attributes that may appear on the concrete definition or the
abstract definition are delayed until the end of the module. Then, if an
abstract definition was created, it is referenced (and no other
attributes are added to the out-of-line definition), otherwise the
attributes are added directly to the out-of-line definition.
In a couple of cases this causes not just reordering of attributes, but
reordering of types. When the creation of the attribute is delayed, if
that creation would create a type (such as for a DW_AT_type attribute)
then other top level DIEs may've been constructed during the delay,
causing the referenced type to be created and added after those
intervening DIEs. In the extreme case, in cross-cu-inlining.ll, this
actually causes the DW_TAG_basic_type for "int" to move from one CU to
another.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209674 91177308-0d34-0410-b5e6-96231b3b80d8
Cortex-M4 only has single-precision floating point support, so any LLVM
"double" type will have been split into 2 i32s by now. Fortunately, the
consecutive-register framework turns out to be precisely what's needed to
reconstruct the double and follow AAPCS-VFP correctly!
rdar://problem/17012966
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209650 91177308-0d34-0410-b5e6-96231b3b80d8
Post commit review feedback from Manman called this out, but it looks
like it slipped through the cracks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209611 91177308-0d34-0410-b5e6-96231b3b80d8
Seems my previous fix was insufficient - we were still not adding the
inlined function to the abstract scope list. Which meant it wasn't
flagged as inline, didn't have nested lexical scopes in the abstract
definition, and didn't have abstract variables - so the inlined variable
didn't reference an abstract variable, instead being described
completely inline.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209602 91177308-0d34-0410-b5e6-96231b3b80d8
This makes front/back symmetric with begin/end, avoiding some confusion.
Added instr_front/instr_back for the old behavior, corresponding to
instr_begin/instr_end. Audited all three in-tree users of back(), all
of them look like they don't want to look inside bundles.
Fixes an assertion (PR19815) when generating debug info on mips, where a
delay slot was bundled at the end of a branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209580 91177308-0d34-0410-b5e6-96231b3b80d8
This seems like a simple cleanup/improved consistency, but also helps
lay the foundation to fix the bug mentioned in the test case: concrete
definitions preceeding any inlined usage aren't properly split into
concrete + abstract (because they're not known to need it until it's too
late).
Once we start deferring this choice until later, we won't have the
choice to put concrete definitions for inlined subroutines in a
different scope from concrete definitions for non-inlined subroutines
(since we won't know at time-of-construction which one it'll be). This
change brings those two cases into alignment ahead of that future
chaneg/fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209547 91177308-0d34-0410-b5e6-96231b3b80d8
It's not really a "ScopeDIE", as such - it's the abstract function
definition's DIE. And we usually use "SP" for subprograms, rather than
"Sub".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209499 91177308-0d34-0410-b5e6-96231b3b80d8
constructSubprogramDIE was already called for every subprogram in every
CU when the module was started - there's no need to call it again at
module finalization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209372 91177308-0d34-0410-b5e6-96231b3b80d8
a subtarget hook to enable. Unconditionally add to the pass pipeline
for targets that might want to use it. No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209340 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r208930, r208933, and r208975.
It seems not all fission consumers are ready to handle this behavior.
Reverting until tools are brought up to spec.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209338 91177308-0d34-0410-b5e6-96231b3b80d8
Committed in r209178 then reverted in r209251 due to LTO breakage,
here's a proper fix for the case of the missing subprogram DIE. The DIEs
were there, just in other compile units. Using the SPMap we can find the
right compile unit to search for and produce cross-unit references to
describe this kind of inlining.
One existing test case needed to be updated because it had a function
that wasn't in the CU's subprogram list, so it didn't appear in the
SPMap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209335 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r209178.
This seems to be asserting in an LTO build on some internal Apple
buildbots. No upstream reproduction (and I don't have an LLVM-aware gold
built right now to reproduce it personally) but it's a small patch & the
failure's semi-plausible so I'm going to revert first while I try to
reproduce this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209251 91177308-0d34-0410-b5e6-96231b3b80d8
Undecided whether this should include a test case - SROA produces bad
dbg.value metadata describing a value for a reference that is actually
the value of the thing the reference refers to. For now, loosening the
assert lets this not assert, but it's still bogus/wrong output...
If someone wants to tell me to add a test, I'm willing/able, just
undecided. Hopefully we'll get SROA fixed soon & we can tighten up this
assertion again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209240 91177308-0d34-0410-b5e6-96231b3b80d8
