Previously this would result in assertion failures or simply crashes
at various points in the optimizer when trying to create types of zero
bit width.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230936 91177308-0d34-0410-b5e6-96231b3b80d8
This manifested as an assertion failure in +Asserts builds, and a hard crash in -Asserts builds. Found by fuzzing the LL parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230934 91177308-0d34-0410-b5e6-96231b3b80d8
A short list of some of the improvements:
1) Now supports -all command line argument, which implies many
other command line arguments to simplify usage.
2) Now supports -no-compiler-generated command line argument to
exclude compiler generated types.
3) Prints base class list.
4) -class-definitions implies -types.
5) Proper display of bitfields.
6) Can now distinguish between struct/class/interface/union.
And a few other minor tweaks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230933 91177308-0d34-0410-b5e6-96231b3b80d8
TargetRegisterInfo. DebugLocEntry now holds a buffer with the raw bytes
of the pre-calculated DWARF expression.
Ought to be NFC, but it does slightly alter the output format of the
textual assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230930 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
As far as I can tell, the real bug causing the issue was fixed in
r230533. SCEVExpander should mark an increment operation as nuw or nsw
only if it can *prove* that the operation does not overflow. There
shouldn't be any situation where we have to do something different
because of no-wrap flags generated by SCEVExpander.
Revert "IndVarSimplify: Allow LFTR to fire more often"
This reverts commit 1ade0f0faa (SVN: 222213).
Revert "IndVarSimplify: Don't let LFTR compare against a poison value"
This reverts commit c0f2b8b528 (SVN: 217102).
Reviewers: majnemer, atrick, spatel
Differential Revision: http://reviews.llvm.org/D7979
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230921 91177308-0d34-0410-b5e6-96231b3b80d8
This has the nice property of compiling down to memcmp when feasible. An empty
ArrayRef can have a nullptr in its Data field. I didn't find anything in the
standard speaking against std::equal(nullptr, nullptr, nullptr) begin valid but
MSVC asserts. The way libstdc++ lowers std::equal down to memcmp also makes
invoking std::equal with a nullptr undefined behavior so checking is the only
way to be safe.
The extra check doesn't cost us perf either because we're essentially peeling
the loop header away from the rotated loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230920 91177308-0d34-0410-b5e6-96231b3b80d8
With initializer lists there is a really neat idiomatic way to write
this, 'ArrayRef.equals({1, 2, 3, 4, 5})'. Remove the equal method which
always had a hard limit on the number of arguments. I considered
rewriting it with variadic templates but that's not really a good fit
for a function with homogeneous arguments.
'ArrayRef == {1, 2, 3, 4, 5}' would've been even more awesome, but C++11
doesn't allow init lists with binary operators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230907 91177308-0d34-0410-b5e6-96231b3b80d8
Such edges are zero matrix, and they bring no additional info to the
allocation problem, apart from contributing to nodes' degree. Removing
those edges is expected to improve allocation time.
Tune the spill cost comparison, as this gives better average performances
now that the nodes' degrees has changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230904 91177308-0d34-0410-b5e6-96231b3b80d8
There are static variables of this around that we really want to go
into a read-only segment. Sadly compilers are not smart enough to figure
that out without constexpr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230895 91177308-0d34-0410-b5e6-96231b3b80d8
It emits *millions of warnings* during selfhosting LTO build, to choke the buildbot with gigbytes of log.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230885 91177308-0d34-0410-b5e6-96231b3b80d8
r228631 stopped using `DW_OP_piece` inside `DIExpression`s in the IR,
but it apparently missed updating these testcases. Caught by verifier
checks for `MDExpression` while working on moving the new hierarchy into
place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230882 91177308-0d34-0410-b5e6-96231b3b80d8
There are two types of files in the old (current) debug info schema.
!0 = !{!"some/filename", !"/path/to/dir"}
!1 = !{!"0x29", !0} ; [ DW_TAG_file_type ]
!1 has a wrapper class called `DIFile` which inherits from `DIScope` and
is referenced in 'scope' fields.
!0 is called a "file node", and debug info nodes with a 'file' field
point at one of these directly -- although they're built in `DIBuilder`
by sending in a `DIFile` and reaching into it.
In the new hierarchy, I unified these nodes as `MDFile` (which `DIFile`
is a lightweight wrapper for) in r230057. Moving the new hierarchy into
place (and upgrading testcases) caused CodeGen/X86/unknown-location.ll
to start failing -- apparently "0x29" was previously showing up in the
linetable as a filename, causing:
.loc 2 4 3
(where 2 points at filename "0x29") instead of:
.loc 1 4 3
(where 1 points at the actual filename).
Change the testcase to use the old schema correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230880 91177308-0d34-0410-b5e6-96231b3b80d8
Start using `TempMDNode` in `DIDescriptor::replaceAllUsesWith()`
(effectively `std::unique_ptr<MDNode, MDNode::deleteTemporary>`).
Besides making ownership more explicit, this prepares for when
`DIDescriptor` refers to nodes that are *not* `MDTuple`. The old logic
for "replacing" a node with itself used `MDNode::get()` to return a new
(uniqued) `MDTuple`, while the new logic just defers to
`MDNode::replaceWithUniqued()` (which also typically saves an allocation
and RAUW traffic by mutating the temporary in place).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230879 91177308-0d34-0410-b5e6-96231b3b80d8
While gaining practical experience hand-updating CHECK lines (for moving
the new debug info hierarchy into place), I learnt a few things about
CHECK-ability of the specialized node assembly output.
- The first part of a `CHECK:` is to identify the "right" node (this
is especially true if you intend to use the new `CHECK-SAME`
feature, since the first CHECK needs to identify the node correctly
before you can split the line).
- If there's a `tag:`, it should go first.
- If there's a `name:`, it should go next (followed by the
`linkageName:`, if any).
- If there's a `scope:`, it should follow after that.
- When a node type supports multiple DW_TAGs, but one is implied by
its name and is overwhelmingly more common, the `tag:` field is
terribly uninteresting unless it's different.
- `MDBasicType` is almost always `DW_TAG_base_type`.
- `MDTemplateValueParameter` is almost always
`DW_TAG_template_value_parameter`.
- Printing `name: ""` doesn't improve CHECK-ability, and there are far
more nodes than I realized that are commonly nameless.
- There are a few other fields that similarly aren't very interesting
when they're empty.
This commit updates the `AsmWriter` as suggested above (and makes
necessary changes in `LLParser` for round-tripping).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230877 91177308-0d34-0410-b5e6-96231b3b80d8
Properly escape string fields in metadata. I've added a spot-check with
direct coverage for `MDFile::getFilename()`, but we'll get more coverage
once the hierarchy is moved into place (since this comes up in various
checked-in testcases).
I've replicated the `if` logic using the `ShouldSkipEmpty` flag
(although a follow-up commit is going to change how often this flag is
specified); no NFCI other than escaping the string fields.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230875 91177308-0d34-0410-b5e6-96231b3b80d8
Extract logic for escaping a string field in the new debug info
hierarchy from `GenericDebugNode`. A follow-up commit will use it far
more widely (hence the dead code for `ShouldSkipEmpty`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230873 91177308-0d34-0410-b5e6-96231b3b80d8
Fix `MDScope::getFile()` so that it correctly returns a valid `MDFile`
even when it's an instance of `MDFile`. This logic is necessary because
of r230057. I'm working on moving the new hierarchy into place
out-of-tree (on track to commit Monday morning, BTW), and this was
exposed by a few failing tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230871 91177308-0d34-0410-b5e6-96231b3b80d8
Previously it was impossible to distinguish between "There is
no PDB implementation for this platform" and "I tried to load
the PDB, but couldn't find the file", making it hard to figure
out if you built llvm-pdbdump incorrectly or if you just mistyped
a file name.
This patch adds proper error handling so that we can know exactly
what went wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230868 91177308-0d34-0410-b5e6-96231b3b80d8
This looks ridiculous but SmallVector's realloc tricks really help with
large vectors of PODs, such as our virtreg IndexedMap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230866 91177308-0d34-0410-b5e6-96231b3b80d8
