specific logic. This makes the code much less fragile. Test case coming on the
clang side in a moment.
rdar://13634327
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179323 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for the COFF relocation types IMAGE_REL_I386_DIR32NB and
IMAGE_REL_AMD64_ADDR32NB for 32- and 64-bit respectively. These are
similar to normal 4-byte relocations except that they do not include
the base address of the image.
Image-relative relocations are used for debug information (32-bit) and
SEH unwind tables (64-bit).
A new MCSymbolRef variant called 'VK_COFF_IMGREL32' is introduced to
specify such relocations. For AT&T assembly, this variant can be accessed
using the symbol suffix '@imgrel'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179240 91177308-0d34-0410-b5e6-96231b3b80d8
Compact unwind has an encoding for when we're not able to generate compact
unwind and must generate an EH frame instead. Track that, but still emit that CU
encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179220 91177308-0d34-0410-b5e6-96231b3b80d8
Test cases that regressed due to r179115, plus a few more, were added in
r179182. Original commit message below:
[ms-inline asm] Use parsePrimaryExpr in lieu of parseExpression if we need to
parse an identifier. Otherwise, parseExpression may parse multiple tokens,
which makes it impossible to properly compute an immediate displacement.
An example of such a case is the source operand (i.e., [Symbol + ImmDisp]) in
the below example:
__asm mov eax, [Symbol + ImmDisp]
Part of rdar://13611297
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179187 91177308-0d34-0410-b5e6-96231b3b80d8
parse an identifier. Otherwise, parseExpression may parse multiple tokens,
which makes it impossible to properly compute an immediate displacement.
An example of such a case is the source operand (i.e., [Symbol + ImmDisp]) in
the below example:
__asm mov eax, [Symbol + ImmDisp]
The existing test cases exercise this patch.
rdar://13611297
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179115 91177308-0d34-0410-b5e6-96231b3b80d8
rather than deriving the StringRef from the Start and End SMLocs.
Using the Start and End SMLocs works fine for operands such as [Symbol], but
not for operands such as [Symbol + ImmDisp]. All existing test cases that
reference a variable exercise this patch.
rdar://13602265
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179109 91177308-0d34-0410-b5e6-96231b3b80d8
This finally fixes the encoding. The patch also
* Removes eh-frame.ll. It was an unnecessary .ll to .o test that was checking
the wrong value.
* Merge fde-reloc.s and eh-frame.s into a single test, since the only difference
was the run lines.
* Don't blindly test the content of the entire .eh_frame section. It makes it
hard to anyone actually fixing a bug and hitting a difference in a binary
blob. Instead, use a CHECK for each field and document what is being checked.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178615 91177308-0d34-0410-b5e6-96231b3b80d8
Revision 177141 caused a regression in all but
mips64 little endian. That is because none of the
other Mips targets had test cases checking the
contents of the .eh_frame section. This patch fixes
both the llvm code and adds an assembler test case
to include the current 4 flavors.
The test cases unfortunately rely on llvm-objdump. A
preferable method would be to use a pretty printer output
such as what readelf -wf <elf_file> would give.
I also changed the name of the test case to correct a typo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178506 91177308-0d34-0410-b5e6-96231b3b80d8
'@SECREL' is what is used by the Microsoft assembler, but GNU as expects '@SECREL32'.
With the patch, the MC-generated code works fine in combination with a recent GNU as (2.23.51.20120920 here).
Patch by David Nadlinger!
Differential Revision: http://llvm-reviews.chandlerc.com/D429
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178427 91177308-0d34-0410-b5e6-96231b3b80d8
added back in by X86AsmPrinter::printIntelMemReference() during codegen.
Previously, this following example
void t() {
int i;
__asm mov eax, [i]
}
would generate the below assembly
mov eax, dword ptr [[eax]]
which resulted in a fatal error when compiling. Test case coming on the
clang side.
rdar://13444264
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177440 91177308-0d34-0410-b5e6-96231b3b80d8
This is a very late complement to r130637 which fixed this on x86_64. Fixes
pr15448.
Since it looks like that every elf architecture uses this encoding when using
cfi, make it the default for elf. Just exclude mips64el. It has a lovely
.ll -> .o test (ef_frame.ll) that tests that nothing changes in the binary
content of the .eh_frame produced by llc. Oblige it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177141 91177308-0d34-0410-b5e6-96231b3b80d8
return 0 to indicate failure to create the disassembler. A library routine
should not assert and just let the caller handler the error. For example
darwin's otool(1) will simply print an error if it ends up using a library
that is not configured for a target it wants:
% otool -tv ViewController.o
ViewController.o:
(__TEXT,__text) section
can't create arm llvm disassembler
This is much better than an abort which appears as a crash to the user or
even the assert when using a Debug+Asserts built library:
Assertion failed: (MAI && "Unable to create target asm info!"), function LLVMCreateDisasmCPU, file /Volumes/SandBox/llvm/lib/MC/MCDisassembler/Disassembler.cpp, line 47.
radr://12539918
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176880 91177308-0d34-0410-b5e6-96231b3b80d8
We now emit a line table for each compile unit. To reduce the prologue size
of each line table, the files and directories used by each compile unit are
stored in std::map<unsigned, std::vector< > > instead of std::vector< >.
The prologue for a lto'ed image can be as big as 93K. Duplicating 93K for each
compile unit causes a huge increase of debug info. With this patch, each
prologue will only emit the files required by the compile unit.
rdar://problem/13342023
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176605 91177308-0d34-0410-b5e6-96231b3b80d8
For integer constants, allow 'L', 'UL' as well as 'ULL' and 'LL'. This provides
better support for shared headers between .s and .c files that define bunches
of constant values.
rdar://9321056
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176118 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC TLS relocation types were not previously added to the
necessary list in MCELFStreamer::fixSymbolsInTLSFixups(). Now they are!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176094 91177308-0d34-0410-b5e6-96231b3b80d8
excluding visibility bits.
Generic STO handling at the Target level.
The st_other field of the ELF symbol table is one
byte in size. The first 2 bytes are used for generic
visibility and are currently handled by llvm.
The other six bits are processor specific and need
to be set at the target level.
A couple of notes:
The new static methods for accessing and setting the "other"
flags in include/llvm/MC/MCELF.h match the style guide
and not the other methods in the file. I don't like the
inconsistency, but feel I should follow the prescribed
lowerUpper() convention.
STO_ value definitions are not specified in gnu land as
consistently as the STT_ and STB_ fields. Probably because
the latter were defined in a standards doc and the former
defined partially in code. I have stuck with the full byte
definition of the flags.
Contributer: Zoran Jovanovic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175561 91177308-0d34-0410-b5e6-96231b3b80d8
GNU as rejects them and there are configure scripts in the wild that check if
the assembler rejects ".align 3" to determine whether the alignment is in bytes
or powers of two.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175360 91177308-0d34-0410-b5e6-96231b3b80d8
Input/Output rewrite to the same location. Make sure the SizeDirective rewrite
is performed first. This also ensure the sort algorithm is stable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175317 91177308-0d34-0410-b5e6-96231b3b80d8
With bundle alignment, instructions all get their own MCFragments
(unless they are in a bundle-locked group). For instructions with
fixups, this is an MCDataFragment. Emitting actual data (e.g. for
.long) attempts to re-use MCDataFragments, which we don't want int
this case since it leads to fragments which exceed the bundle size.
So, don't reuse them in this case.
Also adds a test and fixes some formatting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175316 91177308-0d34-0410-b5e6-96231b3b80d8
Also, allow _EMIT and __EMIT for the emit directive. We already do the same
for TYPE, SIZE, and LENGTH.
rdar://13200215
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175008 91177308-0d34-0410-b5e6-96231b3b80d8
This is complicated by backward labels (e.g., 0b can be both a backward label
and a binary zero). The current implementation assumes [0-9]b is always a
label and thus it's possible for 0b and 1b to not be interpreted correctly for
ms-style inline assembly. However, this is relatively simple to fix in the
inline assembly (i.e., drop the [bB]).
This patch also limits backward labels to [0-9]b, so that only 0b and 1b are
ambiguous.
Part of rdar://12470373
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174983 91177308-0d34-0410-b5e6-96231b3b80d8
I have some uncommitted changes to the cast code that catch this sort of thing
at compile-time but I still need to do some other cleanup before I can enable
it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174853 91177308-0d34-0410-b5e6-96231b3b80d8
We generate one line table for each compilation unit in the object file.
Reviewed by Eric and Kevin.
rdar://problem/13067005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174445 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, when a fragment is relaxed, its size is modified, but its
offset is not (it gets laid out as a side effect of checking whether
it needs relaxation), then all subsequent fragments are invalidated
because their offsets need to change. When bundling is enabled,
relaxed fragments need to get laid out again, because the increase in
size may push it over a bundle boundary. So instead of only
invalidating subsequent fragments, also invalidate the fragment that
gets relaxed, which causes it to get laid out again.
This patch also fixes some trailing whitespace and fixes the
bundling-related debug output of MCFragments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174401 91177308-0d34-0410-b5e6-96231b3b80d8
The sh_link in the ELF section header of .ARM.exidx should
be filled with the section index of the corresponding text
section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174372 91177308-0d34-0410-b5e6-96231b3b80d8
isa<> and dyn_cast<>. In several places, code is already hacking around
the absence of this, and there seem to be several interfaces that might
be lifted and/or devirtualized using this.
This change was based on a discussion with Jim Grosbach about how best
to handle testing for specific MCStreamer subclasses. He said that this
was the correct end state, and everything else was too hacky so
I decided to just make it so.
No functionality should be changed here, this is just threading the kind
through all the constructors and setting up the classof overloads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174113 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for AArch64 (ARM's 64-bit architecture) to
LLVM in the "experimental" category. Currently, it won't be built
unless requested explicitly.
This initial commit should have support for:
+ Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions
(except the late addition CRC instructions).
+ CodeGen features required for C++03 and C99.
+ Compilation for the "small" memory model: code+static data <
4GB.
+ Absolute and position-independent code.
+ GNU-style (i.e. "__thread") TLS.
+ Debugging information.
The principal omission, currently, is performance tuning.
This patch excludes the NEON support also reviewed due to an outbreak of
batshit insanity in our legal department. That will be committed soon bringing
the changes to precisely what has been approved.
Further reviews would be gratefully received.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174054 91177308-0d34-0410-b5e6-96231b3b80d8
and update ELF header e_flags.
Currently gathering information such as symbol,
section and data is done by collecting it in an
MCAssembler object. From MCAssembler and MCAsmLayout
objects ELFObjectWriter::WriteObject() forms and
streams out the ELF object file.
This patch just adds a few members to the MCAssember
class to store and access the e_flag settings. It
allows for runtime additions to the e_flag by
assembler directives. The standalone assembler can
get to MCAssembler from getParser().getStreamer().getAssembler().
This patch is the generic infrastructure and will be
followed by patches for ARM and Mips for their target
specific use.
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173882 91177308-0d34-0410-b5e6-96231b3b80d8
the body does not use them and it appears the body has positional parameters.
This can cause unexpected results as in the added test case. As the darwin
version of gas(1) which only supported positional parameters, happened to
ignore the named parameters. Now that we want to support both styles of
macros we issue a warning in this specific case.
rdar://12861644
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173199 91177308-0d34-0410-b5e6-96231b3b80d8
an expression. Currently this bug causes the line to be ignored in a
release build and an assert in a debug build.
rdar://13062484
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173195 91177308-0d34-0410-b5e6-96231b3b80d8
Add the x32 environment kind to the triple, and separate the concept of
pointer size and callee save stack slot size, since they're not equal
on x32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173175 91177308-0d34-0410-b5e6-96231b3b80d8
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
Support for Mips register information sections.
Mips ELF object files have a section that is dedicated
to register use info. Some of this information such as
the assumed Global Pointer value is used by the linker
in relocation resolution.
The register info file is .reginfo in o32 and .MIPS.options
in 64 and n32 abi files.
This patch contains the changes needed to create the sections,
but leaves the actual register accounting for a future patch.
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172847 91177308-0d34-0410-b5e6-96231b3b80d8
AT_producer. Which includes clang's version information so we can tell
which version of the compiler was used.
This is the first of two steps to allow us to do that. This is the llvm-mc
change to provide a method to set the AT_producer string. The second step,
coming soon to a clang near you, will have the clang driver pass the value
of getClangFullVersion() via an flag when invoking the integrated assembler
on assembly source files.
rdar://12955296
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172630 91177308-0d34-0410-b5e6-96231b3b80d8
Since we already have this type it's a shame to keep dragging a pair of object
and method around explicitly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172584 91177308-0d34-0410-b5e6-96231b3b80d8
using the DW_FORM_GNU_addr_index and a separate .debug_addr section which
stays in the executable and is fully linked.
Sneak in two other small changes:
a) Print out the debug_str_offsets.dwo section.
b) Change form we're expecting the entries in the debug_str_offsets.dwo
section to take from ULEB128 to U32.
Add tests for all of this in the fission-cu.ll test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172578 91177308-0d34-0410-b5e6-96231b3b80d8
into which we can emit single instructions without fixups (which is most
instructions). This is an optimization required because MCDataFragment
is prety large (240 bytes on x64), with no change in functionality.
For large programs, this reduces memory usage overhead required for bundling
by 40%.
To make the code as palatable as possible, the MCEncodedFragment interface was
further fragmented (no pun intended) and MCEncodedFragmentWithFixups is used
as the interface to work against when the user expects fixups. MCDataFragment
and MCRelaxableFragment implement this interface, while the new
MCCompactEncodedInstFragment implements MCEncodeFragment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172572 91177308-0d34-0410-b5e6-96231b3b80d8
// FIXME: Constraints are hard coded to 'm', but we need an 'r'
// constraint for addressof. This needs to be cleaned up!
Test cases are already in place. Specifically,
clang/test/CodeGen/ms-inline-asm.c t15(), t16(), and t24().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172569 91177308-0d34-0410-b5e6-96231b3b80d8
After discussing the refactoring with Jim and Daniel, the following changes were
made:
* All generic directive parsing is now done by AsmParser itself. The previous
division between it and GenericAsmParser did not have clear boundaries and
just produced unnatural code of GenericAsmParser juggling the internals of
AsmParser through an interface.
The division of responsibilities is now clear: target-specific directives,
other extensions (used by platform-specific parseres), and generic directives.
* Priority for directive parsing was reshuffled to ask extensions first and
check the generic directives later.
No change in functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172568 91177308-0d34-0410-b5e6-96231b3b80d8
simply use the getParser method from MCAsmParserExtension, working through the
MCAsmParser interface. There's no longer a need to overload that method to
cast it to the concrete AsmParser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172491 91177308-0d34-0410-b5e6-96231b3b80d8
This finally allows AsmParser to no longer list GenericAsmParser as a friend.
All member vars directly accessed by GenericAsmParser have been properly
encapsulated and exposed through the MCAsmParser interface. This reduces the
coupling between AsmParser and GenericAsmParser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172490 91177308-0d34-0410-b5e6-96231b3b80d8
Now that it behaves itself in terms of streamer independence (r172450), this
method can be moved to MCAsmParser to be available to all extensions,
overriding, etc.
-- -This line, and those below, will be ignored--
M lib/MC/MCParser/AsmParser.cpp
M include/llvm/MC/MCParser/MCAsmParser.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172451 91177308-0d34-0410-b5e6-96231b3b80d8
The aim of this patch is to fix the following piece of code in the
platform-independent AsmParser:
void AsmParser::CheckForValidSection() {
if (!ParsingInlineAsm && !getStreamer().getCurrentSection()) {
TokError("expected section directive before assembly directive");
Out.SwitchSection(Ctx.getMachOSection(
"__TEXT", "__text",
MCSectionMachO::S_ATTR_PURE_INSTRUCTIONS,
0, SectionKind::getText()));
}
}
This was added for the "-n" option of llvm-mc.
The proposed fix adds another virtual method to MCStreamer, called
InitToTextSection. Conceptually, it's similar to the existing
InitSections which initializes all common sections and switches to
text. The new method is implemented by each platform streamer in a way
that it sees fit. So AsmParser can now do this:
void AsmParser::CheckForValidSection() {
if (!ParsingInlineAsm && !getStreamer().getCurrentSection()) {
TokError("expected section directive before assembly directive");
Out.InitToTextSection();
}
}
Which is much more reasonable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172450 91177308-0d34-0410-b5e6-96231b3b80d8
Since it's used by extensions. One further step to fully decoupling
GenericAsmParser from an intimate knowledge of the internals of AsmParser,
pointing it to the MCASmParser interface instead (like all other parser
extensions do).
Since this change moves the MacroArgument type to the interface header, it's
renamed to be a bit more descriptive in a general context.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172449 91177308-0d34-0410-b5e6-96231b3b80d8
The methods are also exposed via the MCAsmParser interface, which allows more
than one client to control them. Previously, GenericAsmParser was playing with
a member var in AsmParser directly (by virtue of being its friend).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172440 91177308-0d34-0410-b5e6-96231b3b80d8
The MCAsmParser interface defines ParseIdentifier is public. There's no reason
whatsoever for AsmParser (which implements the MCAsmParser interface) to hide
this method.
This is all part of a bigger scheme. Several asm parsing "extensions" use the
main parser properly through the MCAsmParser interface. However,
GenericAsmParser has much more exclusive access and uses implementation details
from the concrete implementation - AsmParser, in which it is also declared as
a friend. This makes for overly coupled code, and even makes it hard to split
GenericAsmParser into a separate file. There's no reason why GenericAsmParser
shouldn't be able to access AsmParser through an abstract interface, as long
as it's actually registered as an extension.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172276 91177308-0d34-0410-b5e6-96231b3b80d8
GenericAsmParser extension, where a lot of directives are already being parsed.
The end goal is having just a single place (and a single lookup table) for
all directive parsing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172268 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adjust the r171506 to make all DWARF enconding pc-relative
for PPC64. It also adds the R_PPC64_REL32 relocation handling in MCJIT
(since the eh_frame will not generate PIC-relative relocation) and also
adds the emission of stubs created by the TTypeEncoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171979 91177308-0d34-0410-b5e6-96231b3b80d8
method because getContents().size() already covers it. So computeFragmentSize
can use the generic MCEncodedFragment interface when querying both Data and
Relaxable fragments for contents sizes.
No change in functionality
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171903 91177308-0d34-0410-b5e6-96231b3b80d8
This is necessary not only for representing empty ranges, but for handling
multibyte characters in the input. (If the end pointer in a range refers to
a multibyte character, should it point to the beginning or the end of the
character in a char array?) Some of the code in the asm parsers was already
assuming this anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171765 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes the PPC eh_frame definitions for the personality and
frame unwinding for PIC objects. It makes PIC build correctly creates
relative relocations in the '.rela.eh_frame' segments and thus avoiding
a text relocation that generates a DT_TEXTREL segments in link phase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171506 91177308-0d34-0410-b5e6-96231b3b80d8
instructions in the assembly code variant if one exists.
The intended use for this is so tools like lldb and darwin's otool(1)
can be switched to print Intel-flavored disassembly.
I discussed extensively this API with Jim Grosbach and we feel
while it may not be fully general, in reality there is only one syntax
for each assembly with the exception of X86 which has exactly
two for historical reasons.
rdar://10989182
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170477 91177308-0d34-0410-b5e6-96231b3b80d8
It must be explicity set in MCPureStreamer because otherwise it will
inherit incorrectly from the parent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170383 91177308-0d34-0410-b5e6-96231b3b80d8
compilation directory.
This defaults to the current working directory, just as it always has,
but now an assembler can choose to override it with a custom directory.
I've taught llvm-mc about this option and added a test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170371 91177308-0d34-0410-b5e6-96231b3b80d8
Mips16 is really a processor decoding mode (ala thumb 1) and in the same
program, mips16 and mips32 functions can exist and can call each other.
If a jal type instruction encounters an address with the lower bit set, then
the processor switches to mips16 mode (if it is not already in it). If the
lower bit is not set, then it switches to mips32 mode.
The linker knows which functions are mips16 and which are mips32.
When relocation is performed on code labels, this lower order bit is
set if the code label is a mips16 code label.
In general this works just fine, however when creating exception handling
tables and dwarf, there are cases where you don't want this lower order
bit added in.
This has been traditionally distinguished in gas assembly source by using a
different syntax for the label.
lab1: ; this will cause the lower order bit to be added
lab2=. ; this will not cause the lower order bit to be added
In some cases, it does not matter because in dwarf and debug tables
the difference of two labels is used and in that case the lower order
bits subtract each other out.
To fix this, I have added to mcstreamer the notion of a debuglabel.
The default is for label and debug label to be the same. So calling
EmitLabel and EmitDebugLabel produce the same result.
For various reasons, there is only one set of labels that needs to be
modified for the mips exceptions to work. These are the "$eh_func_beginXXX"
labels.
Mips overrides the debug label suffix from ":" to "=." .
This initial patch fixes exceptions. More changes most likely
will be needed to DwarfCFException to make all of this work
for actual debugging. These changes will be to emit debug labels in some
places where a simple label is emitted now.
Some historical discussion on this from gcc can be found at:
http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.htmlhttp://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170279 91177308-0d34-0410-b5e6-96231b3b80d8
for a wider range of GOT entries that can hold thread-relative offsets.
This matches the behavior of GCC, which was not documented in the PPC64 TLS
ABI. The ABI will be updated with the new code sequence.
Former sequence:
ld 9,x@got@tprel(2)
add 9,9,x@tls
New sequence:
addis 9,2,x@got@tprel@ha
ld 9,x@got@tprel@l(9)
add 9,9,x@tls
Note that a linker optimization exists to transform the new sequence into
the shorter sequence when appropriate, by replacing the addis with a nop
and modifying the base register and relocation type of the ld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170209 91177308-0d34-0410-b5e6-96231b3b80d8
should only occur on invalid input. Instruction matching errors aren't
unexpected, so we can't rely on the AsmParsers HadError variable directly.
rdar://12840278
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170037 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC target. This is the last of the four models, so we now have
full TLS support.
This is mostly a straightforward extension of the general dynamic model.
I had to use an additional Chain operand to tie ADDIS_DTPREL_HA to the
register copy following ADDI_TLSLD_L; otherwise everything above the
ADDIS_DTPREL_HA appeared dead and was removed.
As before, there are new test cases to test the assembly generation, and
the relocations output during integrated assembly. The expected code
gen sequence can be read in test/CodeGen/PowerPC/tls-ld.ll.
There are a couple of things I think can be done more efficiently in the
overall TLS code, so there will likely be a clean-up patch forthcoming;
but for now I want to be sure the functionality is in place.
Bill
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170003 91177308-0d34-0410-b5e6-96231b3b80d8
Add R_ARM_NONE and R_ARM_PREL31 relocation types
to MCExpr. Both of them will be used while
generating .ARM.extab and .ARM.exidx sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169965 91177308-0d34-0410-b5e6-96231b3b80d8
Given a thread-local symbol x with global-dynamic access, the generated
code to obtain x's address is:
Instruction Relocation Symbol
addis ra,r2,x@got@tlsgd@ha R_PPC64_GOT_TLSGD16_HA x
addi r3,ra,x@got@tlsgd@l R_PPC64_GOT_TLSGD16_L x
bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
R_PPC64_REL24 __tls_get_addr
nop
<use address in r3>
The implementation borrows from the medium code model work for introducing
special forms of ADDIS and ADDI into the DAG representation. This is made
slightly more complicated by having to introduce a call to the external
function __tls_get_addr. Using the full call machinery is overkill and,
more importantly, makes it difficult to add a special relocation. So I've
introduced another opcode GET_TLS_ADDR to represent the function call, and
surrounded it with register copies to set up the parameter and return value.
Most of the code is pretty straightforward. I ran into one peculiarity
when I introduced a new PPC opcode BL8_NOP_ELF_TLSGD, which is just like
BL8_NOP_ELF except that it takes another parameter to represent the symbol
("x" above) that requires a relocation on the call. Something in the
TblGen machinery causes BL8_NOP_ELF and BL8_NOP_ELF_TLSGD to be treated
identically during the emit phase, so this second operand was never
visited to generate relocations. This is the reason for the slightly
messy workaround in PPCMCCodeEmitter.cpp:getDirectBrEncoding().
Two new tests are included to demonstrate correct external assembly and
correct generation of relocations using the integrated assembler.
Comments welcome!
Thanks,
Bill
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169910 91177308-0d34-0410-b5e6-96231b3b80d8
because that method is only getting called for MCInstFragment. These
fragments aren't even generated when RelaxAll is set, which is why the
flag reference here is superfluous. Removing it simplifies the code
with no harmful effects.
An assertion is added higher up to make sure this path is never
reached.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169886 91177308-0d34-0410-b5e6-96231b3b80d8
InitSections is called before the MCContext is initialized it could cause
duplicate temporary symbols to be emitted later (after context initialization
resets the temporary label counter).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169785 91177308-0d34-0410-b5e6-96231b3b80d8
