llvm-6502/test/CodeGen/PowerPC/fast-isel-load-store.ll
Bill Schmidt 7248968fa5 [PowerPC] Add loads, stores, and related things to fast-isel.
This is the next big chunk of fast-isel code.  The primary purpose is
to implement selection of loads and stores, but there is a lot of
drag-along to support this.  The common code to analyze addresses for
both loads and stores is substantial.  It's also necessary to add the
materialization code for global values.

Related to load-store processing is the code to fold loads into
integer extends, since otherwise we generate lots of redundant
instructions.  We also need to add some overrides to some FastEmit
routines to ensure we don't assign GPR 0 to a virtual register when
this would change the meaning of an instruction.

I added handling selection of a few binary arithmetic instructions, to
enable committing some test cases I wrote a while back.

Finally, ap couple of miscellaneous changes:
 * I cleaned up some poor style from a previous patch in
   PPCISelLowering.cpp, pointed out by David Blaikie.
 * I enlarged the Addr.Offset field to avoid sign problems with 32-bit
   offsets. 



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189636 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-30 02:29:45 +00:00

203 lines
4.1 KiB
LLVM

; RUN: llc < %s -O0 -verify-machineinstrs -fast-isel-abort -mtriple=powerpc64-unknown-linux-gnu -mcpu=pwr7 | FileCheck %s --check-prefix=ELF64
; This test verifies that load/store instructions are properly generated,
; and that they pass MI verification.
@a = global i8 1, align 1
@b = global i16 2, align 2
@c = global i32 4, align 4
@d = global i64 8, align 8
@e = global float 1.25, align 4
@f = global double 3.5, align 8
%struct.s = type<{ i8, i32 }>
%struct.t = type<{ i8, i64 }>
@g = global %struct.s <{ i8 1, i32 2 }>, align 1
@h = global %struct.t <{ i8 1, i64 2 }>, align 1
@i = common global [8192 x i64] zeroinitializer, align 8
; load
define i8 @t1() nounwind uwtable ssp {
; ELF64: t1
%1 = load i8* @a, align 1
; ELF64: lbz
%2 = add nsw i8 %1, 1
; ELF64: addi
ret i8 %2
}
define i16 @t2() nounwind uwtable ssp {
; ELF64: t2
%1 = load i16* @b, align 2
; ELF64: lhz
%2 = add nsw i16 %1, 1
; ELF64: addi
ret i16 %2
}
define i32 @t3() nounwind uwtable ssp {
; ELF64: t3
%1 = load i32* @c, align 4
; ELF64: lwz
%2 = add nsw i32 %1, 1
; ELF64: addi
ret i32 %2
}
define i64 @t4() nounwind uwtable ssp {
; ELF64: t4
%1 = load i64* @d, align 4
; ELF64: ld
%2 = add nsw i64 %1, 1
; ELF64: addi
ret i64 %2
}
define float @t5() nounwind uwtable ssp {
; ELF64: t5
%1 = load float* @e, align 4
; ELF64: lfs
%2 = fadd float %1, 1.0
; ELF64: fadds
ret float %2
}
define double @t6() nounwind uwtable ssp {
; ELF64: t6
%1 = load double* @f, align 8
; ELF64: lfd
%2 = fadd double %1, 1.0
; ELF64: fadd
ret double %2
}
; store
define void @t7(i8 %v) nounwind uwtable ssp {
; ELF64: t7
%1 = add nsw i8 %v, 1
store i8 %1, i8* @a, align 1
; ELF64: addis
; ELF64: addi
; ELF64: addi
; ELF64: stb
ret void
}
define void @t8(i16 %v) nounwind uwtable ssp {
; ELF64: t8
%1 = add nsw i16 %v, 1
store i16 %1, i16* @b, align 2
; ELF64: addis
; ELF64: addi
; ELF64: addi
; ELF64: sth
ret void
}
define void @t9(i32 %v) nounwind uwtable ssp {
; ELF64: t9
%1 = add nsw i32 %v, 1
store i32 %1, i32* @c, align 4
; ELF64: addis
; ELF64: addi
; ELF64: addi
; ELF64: stw
ret void
}
define void @t10(i64 %v) nounwind uwtable ssp {
; ELF64: t10
%1 = add nsw i64 %v, 1
store i64 %1, i64* @d, align 4
; ELF64: addis
; ELF64: addi
; ELF64: addi
; ELF64: std
ret void
}
define void @t11(float %v) nounwind uwtable ssp {
; ELF64: t11
%1 = fadd float %v, 1.0
store float %1, float* @e, align 4
; ELF64: fadds
; ELF64: stfs
ret void
}
define void @t12(double %v) nounwind uwtable ssp {
; ELF64: t12
%1 = fadd double %v, 1.0
store double %1, double* @f, align 8
; ELF64: fadd
; ELF64: stfd
ret void
}
;; lwa requires an offset divisible by 4, so we need lwax here.
define i64 @t13() nounwind uwtable ssp {
; ELF64: t13
%1 = load i32* getelementptr inbounds (%struct.s* @g, i32 0, i32 1), align 1
%2 = sext i32 %1 to i64
; ELF64: li
; ELF64: lwax
%3 = add nsw i64 %2, 1
; ELF64: addi
ret i64 %3
}
;; ld requires an offset divisible by 4, so we need ldx here.
define i64 @t14() nounwind uwtable ssp {
; ELF64: t14
%1 = load i64* getelementptr inbounds (%struct.t* @h, i32 0, i32 1), align 1
; ELF64: li
; ELF64: ldx
%2 = add nsw i64 %1, 1
; ELF64: addi
ret i64 %2
}
;; std requires an offset divisible by 4, so we need stdx here.
define void @t15(i64 %v) nounwind uwtable ssp {
; ELF64: t15
%1 = add nsw i64 %v, 1
store i64 %1, i64* getelementptr inbounds (%struct.t* @h, i32 0, i32 1), align 1
; ELF64: addis
; ELF64: addi
; ELF64: addi
; ELF64: li
; ELF64: stdx
ret void
}
;; ld requires an offset that fits in 16 bits, so we need ldx here.
define i64 @t16() nounwind uwtable ssp {
; ELF64: t16
%1 = load i64* getelementptr inbounds ([8192 x i64]* @i, i32 0, i64 5000), align 8
; ELF64: lis
; ELF64: ori
; ELF64: ldx
%2 = add nsw i64 %1, 1
; ELF64: addi
ret i64 %2
}
;; std requires an offset that fits in 16 bits, so we need stdx here.
define void @t17(i64 %v) nounwind uwtable ssp {
; ELF64: t17
%1 = add nsw i64 %v, 1
store i64 %1, i64* getelementptr inbounds ([8192 x i64]* @i, i32 0, i64 5000), align 8
; ELF64: addis
; ELF64: ld
; ELF64: addi
; ELF64: lis
; ELF64: ori
; ELF64: stdx
ret void
}