llvm-6502/lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
Chris Lattner 86ca3cacc5 In SDISel, for targets that support FORMAL_ARGUMENTS nodes, lower this
node as soon as we create it in SDISel.  Previously we would lower it in
legalize.  The problem with this is that it only exposes the argument
loads implied by FORMAL_ARGUMENTs after legalize, so that only dag combine 2
can hack on them.  This causes us to miss some optimizations because 
datatype expansion also happens here.

Exposing the loads early allows us to do optimizations on them.  For example
we now compile arg-cast.ll to:

_foo:
	movl	$2147483647, %eax
	andl	8(%esp), %eax
	ret

where we previously produced:

_foo:
	subl	$12, %esp
	movsd	16(%esp), %xmm0
	movsd	%xmm0, (%esp)
	movl	$2147483647, %eax
	andl	4(%esp), %eax
	addl	$12, %esp
	ret

It might also make sense to do this for ISD::CALL nodes, which have implicit
stores on many targets.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47054 91177308-0d34-0410-b5e6-96231b3b80d8
2008-02-13 07:39:09 +00:00

5207 lines
197 KiB
C++

//===-- SelectionDAGISel.cpp - Implement the SelectionDAGISel class -------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This implements the SelectionDAGISel class.
//
//===----------------------------------------------------------------------===//
#define DEBUG_TYPE "isel"
#include "llvm/ADT/BitVector.h"
#include "llvm/Analysis/AliasAnalysis.h"
#include "llvm/CodeGen/SelectionDAGISel.h"
#include "llvm/CodeGen/ScheduleDAG.h"
#include "llvm/Constants.h"
#include "llvm/CallingConv.h"
#include "llvm/DerivedTypes.h"
#include "llvm/Function.h"
#include "llvm/GlobalVariable.h"
#include "llvm/InlineAsm.h"
#include "llvm/Instructions.h"
#include "llvm/Intrinsics.h"
#include "llvm/IntrinsicInst.h"
#include "llvm/ParameterAttributes.h"
#include "llvm/CodeGen/Collector.h"
#include "llvm/CodeGen/MachineFunction.h"
#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
#include "llvm/CodeGen/MachineJumpTableInfo.h"
#include "llvm/CodeGen/MachineModuleInfo.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
#include "llvm/CodeGen/SchedulerRegistry.h"
#include "llvm/CodeGen/SelectionDAG.h"
#include "llvm/Target/TargetRegisterInfo.h"
#include "llvm/Target/TargetData.h"
#include "llvm/Target/TargetFrameInfo.h"
#include "llvm/Target/TargetInstrInfo.h"
#include "llvm/Target/TargetLowering.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Target/TargetOptions.h"
#include "llvm/Support/MathExtras.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/Compiler.h"
#include <algorithm>
using namespace llvm;
#ifndef NDEBUG
static cl::opt<bool>
ViewISelDAGs("view-isel-dags", cl::Hidden,
cl::desc("Pop up a window to show isel dags as they are selected"));
static cl::opt<bool>
ViewSchedDAGs("view-sched-dags", cl::Hidden,
cl::desc("Pop up a window to show sched dags as they are processed"));
static cl::opt<bool>
ViewSUnitDAGs("view-sunit-dags", cl::Hidden,
cl::desc("Pop up a window to show SUnit dags after they are processed"));
#else
static const bool ViewISelDAGs = 0, ViewSchedDAGs = 0, ViewSUnitDAGs = 0;
#endif
//===---------------------------------------------------------------------===//
///
/// RegisterScheduler class - Track the registration of instruction schedulers.
///
//===---------------------------------------------------------------------===//
MachinePassRegistry RegisterScheduler::Registry;
//===---------------------------------------------------------------------===//
///
/// ISHeuristic command line option for instruction schedulers.
///
//===---------------------------------------------------------------------===//
namespace {
cl::opt<RegisterScheduler::FunctionPassCtor, false,
RegisterPassParser<RegisterScheduler> >
ISHeuristic("pre-RA-sched",
cl::init(&createDefaultScheduler),
cl::desc("Instruction schedulers available (before register"
" allocation):"));
static RegisterScheduler
defaultListDAGScheduler("default", " Best scheduler for the target",
createDefaultScheduler);
} // namespace
namespace { struct AsmOperandInfo; }
namespace {
/// RegsForValue - This struct represents the physical registers that a
/// particular value is assigned and the type information about the value.
/// This is needed because values can be promoted into larger registers and
/// expanded into multiple smaller registers than the value.
struct VISIBILITY_HIDDEN RegsForValue {
/// Regs - This list holds the register (for legal and promoted values)
/// or register set (for expanded values) that the value should be assigned
/// to.
std::vector<unsigned> Regs;
/// RegVT - The value type of each register.
///
MVT::ValueType RegVT;
/// ValueVT - The value type of the LLVM value, which may be promoted from
/// RegVT or made from merging the two expanded parts.
MVT::ValueType ValueVT;
RegsForValue() : RegVT(MVT::Other), ValueVT(MVT::Other) {}
RegsForValue(unsigned Reg, MVT::ValueType regvt, MVT::ValueType valuevt)
: RegVT(regvt), ValueVT(valuevt) {
Regs.push_back(Reg);
}
RegsForValue(const std::vector<unsigned> &regs,
MVT::ValueType regvt, MVT::ValueType valuevt)
: Regs(regs), RegVT(regvt), ValueVT(valuevt) {
}
/// getCopyFromRegs - Emit a series of CopyFromReg nodes that copies from
/// this value and returns the result as a ValueVT value. This uses
/// Chain/Flag as the input and updates them for the output Chain/Flag.
/// If the Flag pointer is NULL, no flag is used.
SDOperand getCopyFromRegs(SelectionDAG &DAG,
SDOperand &Chain, SDOperand *Flag) const;
/// getCopyToRegs - Emit a series of CopyToReg nodes that copies the
/// specified value into the registers specified by this object. This uses
/// Chain/Flag as the input and updates them for the output Chain/Flag.
/// If the Flag pointer is NULL, no flag is used.
void getCopyToRegs(SDOperand Val, SelectionDAG &DAG,
SDOperand &Chain, SDOperand *Flag) const;
/// AddInlineAsmOperands - Add this value to the specified inlineasm node
/// operand list. This adds the code marker and includes the number of
/// values added into it.
void AddInlineAsmOperands(unsigned Code, SelectionDAG &DAG,
std::vector<SDOperand> &Ops) const;
};
}
namespace llvm {
//===--------------------------------------------------------------------===//
/// createDefaultScheduler - This creates an instruction scheduler appropriate
/// for the target.
ScheduleDAG* createDefaultScheduler(SelectionDAGISel *IS,
SelectionDAG *DAG,
MachineBasicBlock *BB) {
TargetLowering &TLI = IS->getTargetLowering();
if (TLI.getSchedulingPreference() == TargetLowering::SchedulingForLatency) {
return createTDListDAGScheduler(IS, DAG, BB);
} else {
assert(TLI.getSchedulingPreference() ==
TargetLowering::SchedulingForRegPressure && "Unknown sched type!");
return createBURRListDAGScheduler(IS, DAG, BB);
}
}
//===--------------------------------------------------------------------===//
/// FunctionLoweringInfo - This contains information that is global to a
/// function that is used when lowering a region of the function.
class FunctionLoweringInfo {
public:
TargetLowering &TLI;
Function &Fn;
MachineFunction &MF;
MachineRegisterInfo &RegInfo;
FunctionLoweringInfo(TargetLowering &TLI, Function &Fn,MachineFunction &MF);
/// MBBMap - A mapping from LLVM basic blocks to their machine code entry.
std::map<const BasicBlock*, MachineBasicBlock *> MBBMap;
/// ValueMap - Since we emit code for the function a basic block at a time,
/// we must remember which virtual registers hold the values for
/// cross-basic-block values.
DenseMap<const Value*, unsigned> ValueMap;
/// StaticAllocaMap - Keep track of frame indices for fixed sized allocas in
/// the entry block. This allows the allocas to be efficiently referenced
/// anywhere in the function.
std::map<const AllocaInst*, int> StaticAllocaMap;
#ifndef NDEBUG
SmallSet<Instruction*, 8> CatchInfoLost;
SmallSet<Instruction*, 8> CatchInfoFound;
#endif
unsigned MakeReg(MVT::ValueType VT) {
return RegInfo.createVirtualRegister(TLI.getRegClassFor(VT));
}
/// isExportedInst - Return true if the specified value is an instruction
/// exported from its block.
bool isExportedInst(const Value *V) {
return ValueMap.count(V);
}
unsigned CreateRegForValue(const Value *V);
unsigned InitializeRegForValue(const Value *V) {
unsigned &R = ValueMap[V];
assert(R == 0 && "Already initialized this value register!");
return R = CreateRegForValue(V);
}
};
}
/// isSelector - Return true if this instruction is a call to the
/// eh.selector intrinsic.
static bool isSelector(Instruction *I) {
if (IntrinsicInst *II = dyn_cast<IntrinsicInst>(I))
return (II->getIntrinsicID() == Intrinsic::eh_selector_i32 ||
II->getIntrinsicID() == Intrinsic::eh_selector_i64);
return false;
}
/// isUsedOutsideOfDefiningBlock - Return true if this instruction is used by
/// PHI nodes or outside of the basic block that defines it, or used by a
/// switch instruction, which may expand to multiple basic blocks.
static bool isUsedOutsideOfDefiningBlock(Instruction *I) {
if (isa<PHINode>(I)) return true;
BasicBlock *BB = I->getParent();
for (Value::use_iterator UI = I->use_begin(), E = I->use_end(); UI != E; ++UI)
if (cast<Instruction>(*UI)->getParent() != BB || isa<PHINode>(*UI) ||
// FIXME: Remove switchinst special case.
isa<SwitchInst>(*UI))
return true;
return false;
}
/// isOnlyUsedInEntryBlock - If the specified argument is only used in the
/// entry block, return true. This includes arguments used by switches, since
/// the switch may expand into multiple basic blocks.
static bool isOnlyUsedInEntryBlock(Argument *A) {
BasicBlock *Entry = A->getParent()->begin();
for (Value::use_iterator UI = A->use_begin(), E = A->use_end(); UI != E; ++UI)
if (cast<Instruction>(*UI)->getParent() != Entry || isa<SwitchInst>(*UI))
return false; // Use not in entry block.
return true;
}
FunctionLoweringInfo::FunctionLoweringInfo(TargetLowering &tli,
Function &fn, MachineFunction &mf)
: TLI(tli), Fn(fn), MF(mf), RegInfo(MF.getRegInfo()) {
// Create a vreg for each argument register that is not dead and is used
// outside of the entry block for the function.
for (Function::arg_iterator AI = Fn.arg_begin(), E = Fn.arg_end();
AI != E; ++AI)
if (!isOnlyUsedInEntryBlock(AI))
InitializeRegForValue(AI);
// Initialize the mapping of values to registers. This is only set up for
// instruction values that are used outside of the block that defines
// them.
Function::iterator BB = Fn.begin(), EB = Fn.end();
for (BasicBlock::iterator I = BB->begin(), E = BB->end(); I != E; ++I)
if (AllocaInst *AI = dyn_cast<AllocaInst>(I))
if (ConstantInt *CUI = dyn_cast<ConstantInt>(AI->getArraySize())) {
const Type *Ty = AI->getAllocatedType();
uint64_t TySize = TLI.getTargetData()->getABITypeSize(Ty);
unsigned Align =
std::max((unsigned)TLI.getTargetData()->getPrefTypeAlignment(Ty),
AI->getAlignment());
TySize *= CUI->getZExtValue(); // Get total allocated size.
if (TySize == 0) TySize = 1; // Don't create zero-sized stack objects.
StaticAllocaMap[AI] =
MF.getFrameInfo()->CreateStackObject(TySize, Align);
}
for (; BB != EB; ++BB)
for (BasicBlock::iterator I = BB->begin(), E = BB->end(); I != E; ++I)
if (!I->use_empty() && isUsedOutsideOfDefiningBlock(I))
if (!isa<AllocaInst>(I) ||
!StaticAllocaMap.count(cast<AllocaInst>(I)))
InitializeRegForValue(I);
// Create an initial MachineBasicBlock for each LLVM BasicBlock in F. This
// also creates the initial PHI MachineInstrs, though none of the input
// operands are populated.
for (BB = Fn.begin(), EB = Fn.end(); BB != EB; ++BB) {
MachineBasicBlock *MBB = new MachineBasicBlock(BB);
MBBMap[BB] = MBB;
MF.getBasicBlockList().push_back(MBB);
// Create Machine PHI nodes for LLVM PHI nodes, lowering them as
// appropriate.
PHINode *PN;
for (BasicBlock::iterator I = BB->begin();(PN = dyn_cast<PHINode>(I)); ++I){
if (PN->use_empty()) continue;
MVT::ValueType VT = TLI.getValueType(PN->getType());
unsigned NumRegisters = TLI.getNumRegisters(VT);
unsigned PHIReg = ValueMap[PN];
assert(PHIReg && "PHI node does not have an assigned virtual register!");
const TargetInstrInfo *TII = TLI.getTargetMachine().getInstrInfo();
for (unsigned i = 0; i != NumRegisters; ++i)
BuildMI(MBB, TII->get(TargetInstrInfo::PHI), PHIReg+i);
}
}
}
/// CreateRegForValue - Allocate the appropriate number of virtual registers of
/// the correctly promoted or expanded types. Assign these registers
/// consecutive vreg numbers and return the first assigned number.
unsigned FunctionLoweringInfo::CreateRegForValue(const Value *V) {
MVT::ValueType VT = TLI.getValueType(V->getType());
unsigned NumRegisters = TLI.getNumRegisters(VT);
MVT::ValueType RegisterVT = TLI.getRegisterType(VT);
unsigned R = MakeReg(RegisterVT);
for (unsigned i = 1; i != NumRegisters; ++i)
MakeReg(RegisterVT);
return R;
}
//===----------------------------------------------------------------------===//
/// SelectionDAGLowering - This is the common target-independent lowering
/// implementation that is parameterized by a TargetLowering object.
/// Also, targets can overload any lowering method.
///
namespace llvm {
class SelectionDAGLowering {
MachineBasicBlock *CurMBB;
DenseMap<const Value*, SDOperand> NodeMap;
/// PendingLoads - Loads are not emitted to the program immediately. We bunch
/// them up and then emit token factor nodes when possible. This allows us to
/// get simple disambiguation between loads without worrying about alias
/// analysis.
std::vector<SDOperand> PendingLoads;
/// Case - A struct to record the Value for a switch case, and the
/// case's target basic block.
struct Case {
Constant* Low;
Constant* High;
MachineBasicBlock* BB;
Case() : Low(0), High(0), BB(0) { }
Case(Constant* low, Constant* high, MachineBasicBlock* bb) :
Low(low), High(high), BB(bb) { }
uint64_t size() const {
uint64_t rHigh = cast<ConstantInt>(High)->getSExtValue();
uint64_t rLow = cast<ConstantInt>(Low)->getSExtValue();
return (rHigh - rLow + 1ULL);
}
};
struct CaseBits {
uint64_t Mask;
MachineBasicBlock* BB;
unsigned Bits;
CaseBits(uint64_t mask, MachineBasicBlock* bb, unsigned bits):
Mask(mask), BB(bb), Bits(bits) { }
};
typedef std::vector<Case> CaseVector;
typedef std::vector<CaseBits> CaseBitsVector;
typedef CaseVector::iterator CaseItr;
typedef std::pair<CaseItr, CaseItr> CaseRange;
/// CaseRec - A struct with ctor used in lowering switches to a binary tree
/// of conditional branches.
struct CaseRec {
CaseRec(MachineBasicBlock *bb, Constant *lt, Constant *ge, CaseRange r) :
CaseBB(bb), LT(lt), GE(ge), Range(r) {}
/// CaseBB - The MBB in which to emit the compare and branch
MachineBasicBlock *CaseBB;
/// LT, GE - If nonzero, we know the current case value must be less-than or
/// greater-than-or-equal-to these Constants.
Constant *LT;
Constant *GE;
/// Range - A pair of iterators representing the range of case values to be
/// processed at this point in the binary search tree.
CaseRange Range;
};
typedef std::vector<CaseRec> CaseRecVector;
/// The comparison function for sorting the switch case values in the vector.
/// WARNING: Case ranges should be disjoint!
struct CaseCmp {
bool operator () (const Case& C1, const Case& C2) {
assert(isa<ConstantInt>(C1.Low) && isa<ConstantInt>(C2.High));
const ConstantInt* CI1 = cast<const ConstantInt>(C1.Low);
const ConstantInt* CI2 = cast<const ConstantInt>(C2.High);
return CI1->getValue().slt(CI2->getValue());
}
};
struct CaseBitsCmp {
bool operator () (const CaseBits& C1, const CaseBits& C2) {
return C1.Bits > C2.Bits;
}
};
unsigned Clusterify(CaseVector& Cases, const SwitchInst &SI);
public:
// TLI - This is information that describes the available target features we
// need for lowering. This indicates when operations are unavailable,
// implemented with a libcall, etc.
TargetLowering &TLI;
SelectionDAG &DAG;
const TargetData *TD;
AliasAnalysis &AA;
/// SwitchCases - Vector of CaseBlock structures used to communicate
/// SwitchInst code generation information.
std::vector<SelectionDAGISel::CaseBlock> SwitchCases;
/// JTCases - Vector of JumpTable structures used to communicate
/// SwitchInst code generation information.
std::vector<SelectionDAGISel::JumpTableBlock> JTCases;
std::vector<SelectionDAGISel::BitTestBlock> BitTestCases;
/// FuncInfo - Information about the function as a whole.
///
FunctionLoweringInfo &FuncInfo;
/// GCI - Garbage collection metadata for the function.
CollectorMetadata *GCI;
SelectionDAGLowering(SelectionDAG &dag, TargetLowering &tli,
AliasAnalysis &aa,
FunctionLoweringInfo &funcinfo,
CollectorMetadata *gci)
: TLI(tli), DAG(dag), TD(DAG.getTarget().getTargetData()), AA(aa),
FuncInfo(funcinfo), GCI(gci) {
}
/// getRoot - Return the current virtual root of the Selection DAG.
///
SDOperand getRoot() {
if (PendingLoads.empty())
return DAG.getRoot();
if (PendingLoads.size() == 1) {
SDOperand Root = PendingLoads[0];
DAG.setRoot(Root);
PendingLoads.clear();
return Root;
}
// Otherwise, we have to make a token factor node.
SDOperand Root = DAG.getNode(ISD::TokenFactor, MVT::Other,
&PendingLoads[0], PendingLoads.size());
PendingLoads.clear();
DAG.setRoot(Root);
return Root;
}
SDOperand CopyValueToVirtualRegister(Value *V, unsigned Reg);
void visit(Instruction &I) { visit(I.getOpcode(), I); }
void visit(unsigned Opcode, User &I) {
// Note: this doesn't use InstVisitor, because it has to work with
// ConstantExpr's in addition to instructions.
switch (Opcode) {
default: assert(0 && "Unknown instruction type encountered!");
abort();
// Build the switch statement using the Instruction.def file.
#define HANDLE_INST(NUM, OPCODE, CLASS) \
case Instruction::OPCODE:return visit##OPCODE((CLASS&)I);
#include "llvm/Instruction.def"
}
}
void setCurrentBasicBlock(MachineBasicBlock *MBB) { CurMBB = MBB; }
SDOperand getLoadFrom(const Type *Ty, SDOperand Ptr,
const Value *SV, SDOperand Root,
bool isVolatile, unsigned Alignment);
SDOperand getValue(const Value *V);
void setValue(const Value *V, SDOperand NewN) {
SDOperand &N = NodeMap[V];
assert(N.Val == 0 && "Already set a value for this node!");
N = NewN;
}
void GetRegistersForValue(AsmOperandInfo &OpInfo, bool HasEarlyClobber,
std::set<unsigned> &OutputRegs,
std::set<unsigned> &InputRegs);
void FindMergedConditions(Value *Cond, MachineBasicBlock *TBB,
MachineBasicBlock *FBB, MachineBasicBlock *CurBB,
unsigned Opc);
bool isExportableFromCurrentBlock(Value *V, const BasicBlock *FromBB);
void ExportFromCurrentBlock(Value *V);
void LowerCallTo(CallSite CS, SDOperand Callee, bool IsTailCall,
MachineBasicBlock *LandingPad = NULL);
// Terminator instructions.
void visitRet(ReturnInst &I);
void visitBr(BranchInst &I);
void visitSwitch(SwitchInst &I);
void visitUnreachable(UnreachableInst &I) { /* noop */ }
// Helpers for visitSwitch
bool handleSmallSwitchRange(CaseRec& CR,
CaseRecVector& WorkList,
Value* SV,
MachineBasicBlock* Default);
bool handleJTSwitchCase(CaseRec& CR,
CaseRecVector& WorkList,
Value* SV,
MachineBasicBlock* Default);
bool handleBTSplitSwitchCase(CaseRec& CR,
CaseRecVector& WorkList,
Value* SV,
MachineBasicBlock* Default);
bool handleBitTestsSwitchCase(CaseRec& CR,
CaseRecVector& WorkList,
Value* SV,
MachineBasicBlock* Default);
void visitSwitchCase(SelectionDAGISel::CaseBlock &CB);
void visitBitTestHeader(SelectionDAGISel::BitTestBlock &B);
void visitBitTestCase(MachineBasicBlock* NextMBB,
unsigned Reg,
SelectionDAGISel::BitTestCase &B);
void visitJumpTable(SelectionDAGISel::JumpTable &JT);
void visitJumpTableHeader(SelectionDAGISel::JumpTable &JT,
SelectionDAGISel::JumpTableHeader &JTH);
// These all get lowered before this pass.
void visitInvoke(InvokeInst &I);
void visitUnwind(UnwindInst &I);
void visitBinary(User &I, unsigned OpCode);
void visitShift(User &I, unsigned Opcode);
void visitAdd(User &I) {
if (I.getType()->isFPOrFPVector())
visitBinary(I, ISD::FADD);
else
visitBinary(I, ISD::ADD);
}
void visitSub(User &I);
void visitMul(User &I) {
if (I.getType()->isFPOrFPVector())
visitBinary(I, ISD::FMUL);
else
visitBinary(I, ISD::MUL);
}
void visitURem(User &I) { visitBinary(I, ISD::UREM); }
void visitSRem(User &I) { visitBinary(I, ISD::SREM); }
void visitFRem(User &I) { visitBinary(I, ISD::FREM); }
void visitUDiv(User &I) { visitBinary(I, ISD::UDIV); }
void visitSDiv(User &I) { visitBinary(I, ISD::SDIV); }
void visitFDiv(User &I) { visitBinary(I, ISD::FDIV); }
void visitAnd (User &I) { visitBinary(I, ISD::AND); }
void visitOr (User &I) { visitBinary(I, ISD::OR); }
void visitXor (User &I) { visitBinary(I, ISD::XOR); }
void visitShl (User &I) { visitShift(I, ISD::SHL); }
void visitLShr(User &I) { visitShift(I, ISD::SRL); }
void visitAShr(User &I) { visitShift(I, ISD::SRA); }
void visitICmp(User &I);
void visitFCmp(User &I);
// Visit the conversion instructions
void visitTrunc(User &I);
void visitZExt(User &I);
void visitSExt(User &I);
void visitFPTrunc(User &I);
void visitFPExt(User &I);
void visitFPToUI(User &I);
void visitFPToSI(User &I);
void visitUIToFP(User &I);
void visitSIToFP(User &I);
void visitPtrToInt(User &I);
void visitIntToPtr(User &I);
void visitBitCast(User &I);
void visitExtractElement(User &I);
void visitInsertElement(User &I);
void visitShuffleVector(User &I);
void visitGetElementPtr(User &I);
void visitSelect(User &I);
void visitMalloc(MallocInst &I);
void visitFree(FreeInst &I);
void visitAlloca(AllocaInst &I);
void visitLoad(LoadInst &I);
void visitStore(StoreInst &I);
void visitPHI(PHINode &I) { } // PHI nodes are handled specially.
void visitCall(CallInst &I);
void visitInlineAsm(CallSite CS);
const char *visitIntrinsicCall(CallInst &I, unsigned Intrinsic);
void visitTargetIntrinsic(CallInst &I, unsigned Intrinsic);
void visitVAStart(CallInst &I);
void visitVAArg(VAArgInst &I);
void visitVAEnd(CallInst &I);
void visitVACopy(CallInst &I);
void visitMemIntrinsic(CallInst &I, unsigned Op);
void visitUserOp1(Instruction &I) {
assert(0 && "UserOp1 should not exist at instruction selection time!");
abort();
}
void visitUserOp2(Instruction &I) {
assert(0 && "UserOp2 should not exist at instruction selection time!");
abort();
}
};
} // end namespace llvm
/// getCopyFromParts - Create a value that contains the specified legal parts
/// combined into the value they represent. If the parts combine to a type
/// larger then ValueVT then AssertOp can be used to specify whether the extra
/// bits are known to be zero (ISD::AssertZext) or sign extended from ValueVT
/// (ISD::AssertSext). Likewise TruncExact is used for floating point types to
/// indicate that the extra bits can be discarded without losing precision.
static SDOperand getCopyFromParts(SelectionDAG &DAG,
const SDOperand *Parts,
unsigned NumParts,
MVT::ValueType PartVT,
MVT::ValueType ValueVT,
ISD::NodeType AssertOp = ISD::DELETED_NODE,
bool TruncExact = false) {
assert(NumParts > 0 && "No parts to assemble!");
TargetLowering &TLI = DAG.getTargetLoweringInfo();
SDOperand Val = Parts[0];
if (NumParts > 1) {
// Assemble the value from multiple parts.
if (!MVT::isVector(ValueVT)) {
unsigned PartBits = MVT::getSizeInBits(PartVT);
unsigned ValueBits = MVT::getSizeInBits(ValueVT);
// Assemble the power of 2 part.
unsigned RoundParts = NumParts & (NumParts - 1) ?
1 << Log2_32(NumParts) : NumParts;
unsigned RoundBits = PartBits * RoundParts;
MVT::ValueType RoundVT = RoundBits == ValueBits ?
ValueVT : MVT::getIntegerType(RoundBits);
SDOperand Lo, Hi;
if (RoundParts > 2) {
MVT::ValueType HalfVT = MVT::getIntegerType(RoundBits/2);
Lo = getCopyFromParts(DAG, Parts, RoundParts/2, PartVT, HalfVT);
Hi = getCopyFromParts(DAG, Parts+RoundParts/2, RoundParts/2,
PartVT, HalfVT);
} else {
Lo = Parts[0];
Hi = Parts[1];
}
if (TLI.isBigEndian())
std::swap(Lo, Hi);
Val = DAG.getNode(ISD::BUILD_PAIR, RoundVT, Lo, Hi);
if (RoundParts < NumParts) {
// Assemble the trailing non-power-of-2 part.
unsigned OddParts = NumParts - RoundParts;
MVT::ValueType OddVT = MVT::getIntegerType(OddParts * PartBits);
Hi = getCopyFromParts(DAG, Parts+RoundParts, OddParts, PartVT, OddVT);
// Combine the round and odd parts.
Lo = Val;
if (TLI.isBigEndian())
std::swap(Lo, Hi);
MVT::ValueType TotalVT = MVT::getIntegerType(NumParts * PartBits);
Hi = DAG.getNode(ISD::ANY_EXTEND, TotalVT, Hi);
Hi = DAG.getNode(ISD::SHL, TotalVT, Hi,
DAG.getConstant(MVT::getSizeInBits(Lo.getValueType()),
TLI.getShiftAmountTy()));
Lo = DAG.getNode(ISD::ZERO_EXTEND, TotalVT, Lo);
Val = DAG.getNode(ISD::OR, TotalVT, Lo, Hi);
}
} else {
// Handle a multi-element vector.
MVT::ValueType IntermediateVT, RegisterVT;
unsigned NumIntermediates;
unsigned NumRegs =
TLI.getVectorTypeBreakdown(ValueVT, IntermediateVT, NumIntermediates,
RegisterVT);
assert(NumRegs == NumParts && "Part count doesn't match vector breakdown!");
assert(RegisterVT == PartVT && "Part type doesn't match vector breakdown!");
assert(RegisterVT == Parts[0].getValueType() &&
"Part type doesn't match part!");
// Assemble the parts into intermediate operands.
SmallVector<SDOperand, 8> Ops(NumIntermediates);
if (NumIntermediates == NumParts) {
// If the register was not expanded, truncate or copy the value,
// as appropriate.
for (unsigned i = 0; i != NumParts; ++i)
Ops[i] = getCopyFromParts(DAG, &Parts[i], 1,
PartVT, IntermediateVT);
} else if (NumParts > 0) {
// If the intermediate type was expanded, build the intermediate operands
// from the parts.
assert(NumParts % NumIntermediates == 0 &&
"Must expand into a divisible number of parts!");
unsigned Factor = NumParts / NumIntermediates;
for (unsigned i = 0; i != NumIntermediates; ++i)
Ops[i] = getCopyFromParts(DAG, &Parts[i * Factor], Factor,
PartVT, IntermediateVT);
}
// Build a vector with BUILD_VECTOR or CONCAT_VECTORS from the intermediate
// operands.
Val = DAG.getNode(MVT::isVector(IntermediateVT) ?
ISD::CONCAT_VECTORS : ISD::BUILD_VECTOR,
ValueVT, &Ops[0], NumIntermediates);
}
}
// There is now one part, held in Val. Correct it to match ValueVT.
PartVT = Val.getValueType();
if (PartVT == ValueVT)
return Val;
if (MVT::isVector(PartVT)) {
assert(MVT::isVector(ValueVT) && "Unknown vector conversion!");
return DAG.getNode(ISD::BIT_CONVERT, ValueVT, Val);
}
if (MVT::isVector(ValueVT)) {
assert(MVT::getVectorElementType(ValueVT) == PartVT &&
MVT::getVectorNumElements(ValueVT) == 1 &&
"Only trivial scalar-to-vector conversions should get here!");
return DAG.getNode(ISD::BUILD_VECTOR, ValueVT, Val);
}
if (MVT::isInteger(PartVT) &&
MVT::isInteger(ValueVT)) {
if (MVT::getSizeInBits(ValueVT) < MVT::getSizeInBits(PartVT)) {
// For a truncate, see if we have any information to
// indicate whether the truncated bits will always be
// zero or sign-extension.
if (AssertOp != ISD::DELETED_NODE)
Val = DAG.getNode(AssertOp, PartVT, Val,
DAG.getValueType(ValueVT));
return DAG.getNode(ISD::TRUNCATE, ValueVT, Val);
} else {
return DAG.getNode(ISD::ANY_EXTEND, ValueVT, Val);
}
}
if (MVT::isFloatingPoint(PartVT) && MVT::isFloatingPoint(ValueVT))
return DAG.getNode(ISD::FP_ROUND, ValueVT, Val,
DAG.getIntPtrConstant(TruncExact));
if (MVT::getSizeInBits(PartVT) == MVT::getSizeInBits(ValueVT))
return DAG.getNode(ISD::BIT_CONVERT, ValueVT, Val);
assert(0 && "Unknown mismatch!");
}
/// getCopyToParts - Create a series of nodes that contain the specified value
/// split into legal parts. If the parts contain more bits than Val, then, for
/// integers, ExtendKind can be used to specify how to generate the extra bits.
static void getCopyToParts(SelectionDAG &DAG,
SDOperand Val,
SDOperand *Parts,
unsigned NumParts,
MVT::ValueType PartVT,
ISD::NodeType ExtendKind = ISD::ANY_EXTEND) {
TargetLowering &TLI = DAG.getTargetLoweringInfo();
MVT::ValueType PtrVT = TLI.getPointerTy();
MVT::ValueType ValueVT = Val.getValueType();
unsigned PartBits = MVT::getSizeInBits(PartVT);
assert(TLI.isTypeLegal(PartVT) && "Copying to an illegal type!");
if (!NumParts)
return;
if (!MVT::isVector(ValueVT)) {
if (PartVT == ValueVT) {
assert(NumParts == 1 && "No-op copy with multiple parts!");
Parts[0] = Val;
return;
}
if (NumParts * PartBits > MVT::getSizeInBits(ValueVT)) {
// If the parts cover more bits than the value has, promote the value.
if (MVT::isFloatingPoint(PartVT) && MVT::isFloatingPoint(ValueVT)) {
assert(NumParts == 1 && "Do not know what to promote to!");
Val = DAG.getNode(ISD::FP_EXTEND, PartVT, Val);
} else if (MVT::isInteger(PartVT) && MVT::isInteger(ValueVT)) {
ValueVT = MVT::getIntegerType(NumParts * PartBits);
Val = DAG.getNode(ExtendKind, ValueVT, Val);
} else {
assert(0 && "Unknown mismatch!");
}
} else if (PartBits == MVT::getSizeInBits(ValueVT)) {
// Different types of the same size.
assert(NumParts == 1 && PartVT != ValueVT);
Val = DAG.getNode(ISD::BIT_CONVERT, PartVT, Val);
} else if (NumParts * PartBits < MVT::getSizeInBits(ValueVT)) {
// If the parts cover less bits than value has, truncate the value.
if (MVT::isInteger(PartVT) && MVT::isInteger(ValueVT)) {
ValueVT = MVT::getIntegerType(NumParts * PartBits);
Val = DAG.getNode(ISD::TRUNCATE, ValueVT, Val);
} else {
assert(0 && "Unknown mismatch!");
}
}
// The value may have changed - recompute ValueVT.
ValueVT = Val.getValueType();
assert(NumParts * PartBits == MVT::getSizeInBits(ValueVT) &&
"Failed to tile the value with PartVT!");
if (NumParts == 1) {
assert(PartVT == ValueVT && "Type conversion failed!");
Parts[0] = Val;
return;
}
// Expand the value into multiple parts.
if (NumParts & (NumParts - 1)) {
// The number of parts is not a power of 2. Split off and copy the tail.
assert(MVT::isInteger(PartVT) && MVT::isInteger(ValueVT) &&
"Do not know what to expand to!");
unsigned RoundParts = 1 << Log2_32(NumParts);
unsigned RoundBits = RoundParts * PartBits;
unsigned OddParts = NumParts - RoundParts;
SDOperand OddVal = DAG.getNode(ISD::SRL, ValueVT, Val,
DAG.getConstant(RoundBits,
TLI.getShiftAmountTy()));
getCopyToParts(DAG, OddVal, Parts + RoundParts, OddParts, PartVT);
if (TLI.isBigEndian())
// The odd parts were reversed by getCopyToParts - unreverse them.
std::reverse(Parts + RoundParts, Parts + NumParts);
NumParts = RoundParts;
ValueVT = MVT::getIntegerType(NumParts * PartBits);
Val = DAG.getNode(ISD::TRUNCATE, ValueVT, Val);
}
// The number of parts is a power of 2. Repeatedly bisect the value using
// EXTRACT_ELEMENT.
Parts[0] = Val;
for (unsigned StepSize = NumParts; StepSize > 1; StepSize /= 2) {
for (unsigned i = 0; i < NumParts; i += StepSize) {
unsigned ThisBits = StepSize * PartBits / 2;
MVT::ValueType ThisVT =
ThisBits == PartBits ? PartVT : MVT::getIntegerType (ThisBits);
Parts[i+StepSize/2] =
DAG.getNode(ISD::EXTRACT_ELEMENT, ThisVT, Parts[i],
DAG.getConstant(1, PtrVT));
Parts[i] =
DAG.getNode(ISD::EXTRACT_ELEMENT, ThisVT, Parts[i],
DAG.getConstant(0, PtrVT));
}
}
if (TLI.isBigEndian())
std::reverse(Parts, Parts + NumParts);
return;
}
// Vector ValueVT.
if (NumParts == 1) {
if (PartVT != ValueVT) {
if (MVT::isVector(PartVT)) {
Val = DAG.getNode(ISD::BIT_CONVERT, PartVT, Val);
} else {
assert(MVT::getVectorElementType(ValueVT) == PartVT &&
MVT::getVectorNumElements(ValueVT) == 1 &&
"Only trivial vector-to-scalar conversions should get here!");
Val = DAG.getNode(ISD::EXTRACT_VECTOR_ELT, PartVT, Val,
DAG.getConstant(0, PtrVT));
}
}
Parts[0] = Val;
return;
}
// Handle a multi-element vector.
MVT::ValueType IntermediateVT, RegisterVT;
unsigned NumIntermediates;
unsigned NumRegs =
DAG.getTargetLoweringInfo()
.getVectorTypeBreakdown(ValueVT, IntermediateVT, NumIntermediates,
RegisterVT);
unsigned NumElements = MVT::getVectorNumElements(ValueVT);
assert(NumRegs == NumParts && "Part count doesn't match vector breakdown!");
assert(RegisterVT == PartVT && "Part type doesn't match vector breakdown!");
// Split the vector into intermediate operands.
SmallVector<SDOperand, 8> Ops(NumIntermediates);
for (unsigned i = 0; i != NumIntermediates; ++i)
if (MVT::isVector(IntermediateVT))
Ops[i] = DAG.getNode(ISD::EXTRACT_SUBVECTOR,
IntermediateVT, Val,
DAG.getConstant(i * (NumElements / NumIntermediates),
PtrVT));
else
Ops[i] = DAG.getNode(ISD::EXTRACT_VECTOR_ELT,
IntermediateVT, Val,
DAG.getConstant(i, PtrVT));
// Split the intermediate operands into legal parts.
if (NumParts == NumIntermediates) {
// If the register was not expanded, promote or copy the value,
// as appropriate.
for (unsigned i = 0; i != NumParts; ++i)
getCopyToParts(DAG, Ops[i], &Parts[i], 1, PartVT);
} else if (NumParts > 0) {
// If the intermediate type was expanded, split each the value into
// legal parts.
assert(NumParts % NumIntermediates == 0 &&
"Must expand into a divisible number of parts!");
unsigned Factor = NumParts / NumIntermediates;
for (unsigned i = 0; i != NumIntermediates; ++i)
getCopyToParts(DAG, Ops[i], &Parts[i * Factor], Factor, PartVT);
}
}
SDOperand SelectionDAGLowering::getValue(const Value *V) {
SDOperand &N = NodeMap[V];
if (N.Val) return N;
const Type *VTy = V->getType();
MVT::ValueType VT = TLI.getValueType(VTy);
if (Constant *C = const_cast<Constant*>(dyn_cast<Constant>(V))) {
if (ConstantExpr *CE = dyn_cast<ConstantExpr>(C)) {
visit(CE->getOpcode(), *CE);
SDOperand N1 = NodeMap[V];
assert(N1.Val && "visit didn't populate the ValueMap!");
return N1;
} else if (GlobalValue *GV = dyn_cast<GlobalValue>(C)) {
return N = DAG.getGlobalAddress(GV, VT);
} else if (isa<ConstantPointerNull>(C)) {
return N = DAG.getConstant(0, TLI.getPointerTy());
} else if (isa<UndefValue>(C)) {
if (!isa<VectorType>(VTy))
return N = DAG.getNode(ISD::UNDEF, VT);
// Create a BUILD_VECTOR of undef nodes.
const VectorType *PTy = cast<VectorType>(VTy);
unsigned NumElements = PTy->getNumElements();
MVT::ValueType PVT = TLI.getValueType(PTy->getElementType());
SmallVector<SDOperand, 8> Ops;
Ops.assign(NumElements, DAG.getNode(ISD::UNDEF, PVT));
// Create a VConstant node with generic Vector type.
MVT::ValueType VT = MVT::getVectorType(PVT, NumElements);
return N = DAG.getNode(ISD::BUILD_VECTOR, VT,
&Ops[0], Ops.size());
} else if (ConstantFP *CFP = dyn_cast<ConstantFP>(C)) {
return N = DAG.getConstantFP(CFP->getValueAPF(), VT);
} else if (const VectorType *PTy = dyn_cast<VectorType>(VTy)) {
unsigned NumElements = PTy->getNumElements();
MVT::ValueType PVT = TLI.getValueType(PTy->getElementType());
// Now that we know the number and type of the elements, push a
// Constant or ConstantFP node onto the ops list for each element of
// the vector constant.
SmallVector<SDOperand, 8> Ops;
if (ConstantVector *CP = dyn_cast<ConstantVector>(C)) {
for (unsigned i = 0; i != NumElements; ++i)
Ops.push_back(getValue(CP->getOperand(i)));
} else {
assert(isa<ConstantAggregateZero>(C) && "Unknown vector constant!");
SDOperand Op;
if (MVT::isFloatingPoint(PVT))
Op = DAG.getConstantFP(0, PVT);
else
Op = DAG.getConstant(0, PVT);
Ops.assign(NumElements, Op);
}
// Create a BUILD_VECTOR node.
MVT::ValueType VT = MVT::getVectorType(PVT, NumElements);
return NodeMap[V] = DAG.getNode(ISD::BUILD_VECTOR, VT, &Ops[0],
Ops.size());
} else {
// Canonicalize all constant ints to be unsigned.
return N = DAG.getConstant(cast<ConstantInt>(C)->getZExtValue(),VT);
}
}
if (const AllocaInst *AI = dyn_cast<AllocaInst>(V)) {
std::map<const AllocaInst*, int>::iterator SI =
FuncInfo.StaticAllocaMap.find(AI);
if (SI != FuncInfo.StaticAllocaMap.end())
return DAG.getFrameIndex(SI->second, TLI.getPointerTy());
}
unsigned InReg = FuncInfo.ValueMap[V];
assert(InReg && "Value not in map!");
MVT::ValueType RegisterVT = TLI.getRegisterType(VT);
unsigned NumRegs = TLI.getNumRegisters(VT);
std::vector<unsigned> Regs(NumRegs);
for (unsigned i = 0; i != NumRegs; ++i)
Regs[i] = InReg + i;
RegsForValue RFV(Regs, RegisterVT, VT);
SDOperand Chain = DAG.getEntryNode();
return RFV.getCopyFromRegs(DAG, Chain, NULL);
}
void SelectionDAGLowering::visitRet(ReturnInst &I) {
if (I.getNumOperands() == 0) {
DAG.setRoot(DAG.getNode(ISD::RET, MVT::Other, getRoot()));
return;
}
SmallVector<SDOperand, 8> NewValues;
NewValues.push_back(getRoot());
for (unsigned i = 0, e = I.getNumOperands(); i != e; ++i) {
SDOperand RetOp = getValue(I.getOperand(i));
MVT::ValueType VT = RetOp.getValueType();
// FIXME: C calling convention requires the return type to be promoted to
// at least 32-bit. But this is not necessary for non-C calling conventions.
if (MVT::isInteger(VT)) {
MVT::ValueType MinVT = TLI.getRegisterType(MVT::i32);
if (MVT::getSizeInBits(VT) < MVT::getSizeInBits(MinVT))
VT = MinVT;
}
unsigned NumParts = TLI.getNumRegisters(VT);
MVT::ValueType PartVT = TLI.getRegisterType(VT);
SmallVector<SDOperand, 4> Parts(NumParts);
ISD::NodeType ExtendKind = ISD::ANY_EXTEND;
const Function *F = I.getParent()->getParent();
if (F->paramHasAttr(0, ParamAttr::SExt))
ExtendKind = ISD::SIGN_EXTEND;
else if (F->paramHasAttr(0, ParamAttr::ZExt))
ExtendKind = ISD::ZERO_EXTEND;
getCopyToParts(DAG, RetOp, &Parts[0], NumParts, PartVT, ExtendKind);
for (unsigned i = 0; i < NumParts; ++i) {
NewValues.push_back(Parts[i]);
NewValues.push_back(DAG.getConstant(false, MVT::i32));
}
}
DAG.setRoot(DAG.getNode(ISD::RET, MVT::Other,
&NewValues[0], NewValues.size()));
}
/// ExportFromCurrentBlock - If this condition isn't known to be exported from
/// the current basic block, add it to ValueMap now so that we'll get a
/// CopyTo/FromReg.
void SelectionDAGLowering::ExportFromCurrentBlock(Value *V) {
// No need to export constants.
if (!isa<Instruction>(V) && !isa<Argument>(V)) return;
// Already exported?
if (FuncInfo.isExportedInst(V)) return;
unsigned Reg = FuncInfo.InitializeRegForValue(V);
PendingLoads.push_back(CopyValueToVirtualRegister(V, Reg));
}
bool SelectionDAGLowering::isExportableFromCurrentBlock(Value *V,
const BasicBlock *FromBB) {
// The operands of the setcc have to be in this block. We don't know
// how to export them from some other block.
if (Instruction *VI = dyn_cast<Instruction>(V)) {
// Can export from current BB.
if (VI->getParent() == FromBB)
return true;
// Is already exported, noop.
return FuncInfo.isExportedInst(V);
}
// If this is an argument, we can export it if the BB is the entry block or
// if it is already exported.
if (isa<Argument>(V)) {
if (FromBB == &FromBB->getParent()->getEntryBlock())
return true;
// Otherwise, can only export this if it is already exported.
return FuncInfo.isExportedInst(V);
}
// Otherwise, constants can always be exported.
return true;
}
static bool InBlock(const Value *V, const BasicBlock *BB) {
if (const Instruction *I = dyn_cast<Instruction>(V))
return I->getParent() == BB;
return true;
}
/// FindMergedConditions - If Cond is an expression like
void SelectionDAGLowering::FindMergedConditions(Value *Cond,
MachineBasicBlock *TBB,
MachineBasicBlock *FBB,
MachineBasicBlock *CurBB,
unsigned Opc) {
// If this node is not part of the or/and tree, emit it as a branch.
Instruction *BOp = dyn_cast<Instruction>(Cond);
if (!BOp || !(isa<BinaryOperator>(BOp) || isa<CmpInst>(BOp)) ||
(unsigned)BOp->getOpcode() != Opc || !BOp->hasOneUse() ||
BOp->getParent() != CurBB->getBasicBlock() ||
!InBlock(BOp->getOperand(0), CurBB->getBasicBlock()) ||
!InBlock(BOp->getOperand(1), CurBB->getBasicBlock())) {
const BasicBlock *BB = CurBB->getBasicBlock();
// If the leaf of the tree is a comparison, merge the condition into
// the caseblock.
if ((isa<ICmpInst>(Cond) || isa<FCmpInst>(Cond)) &&
// The operands of the cmp have to be in this block. We don't know
// how to export them from some other block. If this is the first block
// of the sequence, no exporting is needed.
(CurBB == CurMBB ||
(isExportableFromCurrentBlock(BOp->getOperand(0), BB) &&
isExportableFromCurrentBlock(BOp->getOperand(1), BB)))) {
BOp = cast<Instruction>(Cond);
ISD::CondCode Condition;
if (ICmpInst *IC = dyn_cast<ICmpInst>(Cond)) {
switch (IC->getPredicate()) {
default: assert(0 && "Unknown icmp predicate opcode!");
case ICmpInst::ICMP_EQ: Condition = ISD::SETEQ; break;
case ICmpInst::ICMP_NE: Condition = ISD::SETNE; break;
case ICmpInst::ICMP_SLE: Condition = ISD::SETLE; break;
case ICmpInst::ICMP_ULE: Condition = ISD::SETULE; break;
case ICmpInst::ICMP_SGE: Condition = ISD::SETGE; break;
case ICmpInst::ICMP_UGE: Condition = ISD::SETUGE; break;
case ICmpInst::ICMP_SLT: Condition = ISD::SETLT; break;
case ICmpInst::ICMP_ULT: Condition = ISD::SETULT; break;
case ICmpInst::ICMP_SGT: Condition = ISD::SETGT; break;
case ICmpInst::ICMP_UGT: Condition = ISD::SETUGT; break;
}
} else if (FCmpInst *FC = dyn_cast<FCmpInst>(Cond)) {
ISD::CondCode FPC, FOC;
switch (FC->getPredicate()) {
default: assert(0 && "Unknown fcmp predicate opcode!");
case FCmpInst::FCMP_FALSE: FOC = FPC = ISD::SETFALSE; break;
case FCmpInst::FCMP_OEQ: FOC = ISD::SETEQ; FPC = ISD::SETOEQ; break;
case FCmpInst::FCMP_OGT: FOC = ISD::SETGT; FPC = ISD::SETOGT; break;
case FCmpInst::FCMP_OGE: FOC = ISD::SETGE; FPC = ISD::SETOGE; break;
case FCmpInst::FCMP_OLT: FOC = ISD::SETLT; FPC = ISD::SETOLT; break;
case FCmpInst::FCMP_OLE: FOC = ISD::SETLE; FPC = ISD::SETOLE; break;
case FCmpInst::FCMP_ONE: FOC = ISD::SETNE; FPC = ISD::SETONE; break;
case FCmpInst::FCMP_ORD: FOC = ISD::SETEQ; FPC = ISD::SETO; break;
case FCmpInst::FCMP_UNO: FOC = ISD::SETNE; FPC = ISD::SETUO; break;
case FCmpInst::FCMP_UEQ: FOC = ISD::SETEQ; FPC = ISD::SETUEQ; break;
case FCmpInst::FCMP_UGT: FOC = ISD::SETGT; FPC = ISD::SETUGT; break;
case FCmpInst::FCMP_UGE: FOC = ISD::SETGE; FPC = ISD::SETUGE; break;
case FCmpInst::FCMP_ULT: FOC = ISD::SETLT; FPC = ISD::SETULT; break;
case FCmpInst::FCMP_ULE: FOC = ISD::SETLE; FPC = ISD::SETULE; break;
case FCmpInst::FCMP_UNE: FOC = ISD::SETNE; FPC = ISD::SETUNE; break;
case FCmpInst::FCMP_TRUE: FOC = FPC = ISD::SETTRUE; break;
}
if (FiniteOnlyFPMath())
Condition = FOC;
else
Condition = FPC;
} else {
Condition = ISD::SETEQ; // silence warning.
assert(0 && "Unknown compare instruction");
}
SelectionDAGISel::CaseBlock CB(Condition, BOp->getOperand(0),
BOp->getOperand(1), NULL, TBB, FBB, CurBB);
SwitchCases.push_back(CB);
return;
}
// Create a CaseBlock record representing this branch.
SelectionDAGISel::CaseBlock CB(ISD::SETEQ, Cond, ConstantInt::getTrue(),
NULL, TBB, FBB, CurBB);
SwitchCases.push_back(CB);
return;
}
// Create TmpBB after CurBB.
MachineFunction::iterator BBI = CurBB;
MachineBasicBlock *TmpBB = new MachineBasicBlock(CurBB->getBasicBlock());
CurBB->getParent()->getBasicBlockList().insert(++BBI, TmpBB);
if (Opc == Instruction::Or) {
// Codegen X | Y as:
// jmp_if_X TBB
// jmp TmpBB
// TmpBB:
// jmp_if_Y TBB
// jmp FBB
//
// Emit the LHS condition.
FindMergedConditions(BOp->getOperand(0), TBB, TmpBB, CurBB, Opc);
// Emit the RHS condition into TmpBB.
FindMergedConditions(BOp->getOperand(1), TBB, FBB, TmpBB, Opc);
} else {
assert(Opc == Instruction::And && "Unknown merge op!");
// Codegen X & Y as:
// jmp_if_X TmpBB
// jmp FBB
// TmpBB:
// jmp_if_Y TBB
// jmp FBB
//
// This requires creation of TmpBB after CurBB.
// Emit the LHS condition.
FindMergedConditions(BOp->getOperand(0), TmpBB, FBB, CurBB, Opc);
// Emit the RHS condition into TmpBB.
FindMergedConditions(BOp->getOperand(1), TBB, FBB, TmpBB, Opc);
}
}
/// If the set of cases should be emitted as a series of branches, return true.
/// If we should emit this as a bunch of and/or'd together conditions, return
/// false.
static bool
ShouldEmitAsBranches(const std::vector<SelectionDAGISel::CaseBlock> &Cases) {
if (Cases.size() != 2) return true;
// If this is two comparisons of the same values or'd or and'd together, they
// will get folded into a single comparison, so don't emit two blocks.
if ((Cases[0].CmpLHS == Cases[1].CmpLHS &&
Cases[0].CmpRHS == Cases[1].CmpRHS) ||
(Cases[0].CmpRHS == Cases[1].CmpLHS &&
Cases[0].CmpLHS == Cases[1].CmpRHS)) {
return false;
}
return true;
}
void SelectionDAGLowering::visitBr(BranchInst &I) {
// Update machine-CFG edges.
MachineBasicBlock *Succ0MBB = FuncInfo.MBBMap[I.getSuccessor(0)];
// Figure out which block is immediately after the current one.
MachineBasicBlock *NextBlock = 0;
MachineFunction::iterator BBI = CurMBB;
if (++BBI != CurMBB->getParent()->end())
NextBlock = BBI;
if (I.isUnconditional()) {
// If this is not a fall-through branch, emit the branch.
if (Succ0MBB != NextBlock)
DAG.setRoot(DAG.getNode(ISD::BR, MVT::Other, getRoot(),
DAG.getBasicBlock(Succ0MBB)));
// Update machine-CFG edges.
CurMBB->addSuccessor(Succ0MBB);
return;
}
// If this condition is one of the special cases we handle, do special stuff
// now.
Value *CondVal = I.getCondition();
MachineBasicBlock *Succ1MBB = FuncInfo.MBBMap[I.getSuccessor(1)];
// If this is a series of conditions that are or'd or and'd together, emit
// this as a sequence of branches instead of setcc's with and/or operations.
// For example, instead of something like:
// cmp A, B
// C = seteq
// cmp D, E
// F = setle
// or C, F
// jnz foo
// Emit:
// cmp A, B
// je foo
// cmp D, E
// jle foo
//
if (BinaryOperator *BOp = dyn_cast<BinaryOperator>(CondVal)) {
if (BOp->hasOneUse() &&
(BOp->getOpcode() == Instruction::And ||
BOp->getOpcode() == Instruction::Or)) {
FindMergedConditions(BOp, Succ0MBB, Succ1MBB, CurMBB, BOp->getOpcode());
// If the compares in later blocks need to use values not currently
// exported from this block, export them now. This block should always
// be the first entry.
assert(SwitchCases[0].ThisBB == CurMBB && "Unexpected lowering!");
// Allow some cases to be rejected.
if (ShouldEmitAsBranches(SwitchCases)) {
for (unsigned i = 1, e = SwitchCases.size(); i != e; ++i) {
ExportFromCurrentBlock(SwitchCases[i].CmpLHS);
ExportFromCurrentBlock(SwitchCases[i].CmpRHS);
}
// Emit the branch for this block.
visitSwitchCase(SwitchCases[0]);
SwitchCases.erase(SwitchCases.begin());
return;
}
// Okay, we decided not to do this, remove any inserted MBB's and clear
// SwitchCases.
for (unsigned i = 1, e = SwitchCases.size(); i != e; ++i)
CurMBB->getParent()->getBasicBlockList().erase(SwitchCases[i].ThisBB);
SwitchCases.clear();
}
}
// Create a CaseBlock record representing this branch.
SelectionDAGISel::CaseBlock CB(ISD::SETEQ, CondVal, ConstantInt::getTrue(),
NULL, Succ0MBB, Succ1MBB, CurMBB);
// Use visitSwitchCase to actually insert the fast branch sequence for this
// cond branch.
visitSwitchCase(CB);
}
/// visitSwitchCase - Emits the necessary code to represent a single node in
/// the binary search tree resulting from lowering a switch instruction.
void SelectionDAGLowering::visitSwitchCase(SelectionDAGISel::CaseBlock &CB) {
SDOperand Cond;
SDOperand CondLHS = getValue(CB.CmpLHS);
// Build the setcc now.
if (CB.CmpMHS == NULL) {
// Fold "(X == true)" to X and "(X == false)" to !X to
// handle common cases produced by branch lowering.
if (CB.CmpRHS == ConstantInt::getTrue() && CB.CC == ISD::SETEQ)
Cond = CondLHS;
else if (CB.CmpRHS == ConstantInt::getFalse() && CB.CC == ISD::SETEQ) {
SDOperand True = DAG.getConstant(1, CondLHS.getValueType());
Cond = DAG.getNode(ISD::XOR, CondLHS.getValueType(), CondLHS, True);
} else
Cond = DAG.getSetCC(MVT::i1, CondLHS, getValue(CB.CmpRHS), CB.CC);
} else {
assert(CB.CC == ISD::SETLE && "Can handle only LE ranges now");
uint64_t Low = cast<ConstantInt>(CB.CmpLHS)->getSExtValue();
uint64_t High = cast<ConstantInt>(CB.CmpRHS)->getSExtValue();
SDOperand CmpOp = getValue(CB.CmpMHS);
MVT::ValueType VT = CmpOp.getValueType();
if (cast<ConstantInt>(CB.CmpLHS)->isMinValue(true)) {
Cond = DAG.getSetCC(MVT::i1, CmpOp, DAG.getConstant(High, VT), ISD::SETLE);
} else {
SDOperand SUB = DAG.getNode(ISD::SUB, VT, CmpOp, DAG.getConstant(Low, VT));
Cond = DAG.getSetCC(MVT::i1, SUB,
DAG.getConstant(High-Low, VT), ISD::SETULE);
}
}
// Set NextBlock to be the MBB immediately after the current one, if any.
// This is used to avoid emitting unnecessary branches to the next block.
MachineBasicBlock *NextBlock = 0;
MachineFunction::iterator BBI = CurMBB;
if (++BBI != CurMBB->getParent()->end())
NextBlock = BBI;
// If the lhs block is the next block, invert the condition so that we can
// fall through to the lhs instead of the rhs block.
if (CB.TrueBB == NextBlock) {
std::swap(CB.TrueBB, CB.FalseBB);
SDOperand True = DAG.getConstant(1, Cond.getValueType());
Cond = DAG.getNode(ISD::XOR, Cond.getValueType(), Cond, True);
}
SDOperand BrCond = DAG.getNode(ISD::BRCOND, MVT::Other, getRoot(), Cond,
DAG.getBasicBlock(CB.TrueBB));
if (CB.FalseBB == NextBlock)
DAG.setRoot(BrCond);
else
DAG.setRoot(DAG.getNode(ISD::BR, MVT::Other, BrCond,
DAG.getBasicBlock(CB.FalseBB)));
// Update successor info
CurMBB->addSuccessor(CB.TrueBB);
CurMBB->addSuccessor(CB.FalseBB);
}
/// visitJumpTable - Emit JumpTable node in the current MBB
void SelectionDAGLowering::visitJumpTable(SelectionDAGISel::JumpTable &JT) {
// Emit the code for the jump table
assert(JT.Reg != -1U && "Should lower JT Header first!");
MVT::ValueType PTy = TLI.getPointerTy();
SDOperand Index = DAG.getCopyFromReg(getRoot(), JT.Reg, PTy);
SDOperand Table = DAG.getJumpTable(JT.JTI, PTy);
DAG.setRoot(DAG.getNode(ISD::BR_JT, MVT::Other, Index.getValue(1),
Table, Index));
return;
}
/// visitJumpTableHeader - This function emits necessary code to produce index
/// in the JumpTable from switch case.
void SelectionDAGLowering::visitJumpTableHeader(SelectionDAGISel::JumpTable &JT,
SelectionDAGISel::JumpTableHeader &JTH) {
// Subtract the lowest switch case value from the value being switched on
// and conditional branch to default mbb if the result is greater than the
// difference between smallest and largest cases.
SDOperand SwitchOp = getValue(JTH.SValue);
MVT::ValueType VT = SwitchOp.getValueType();
SDOperand SUB = DAG.getNode(ISD::SUB, VT, SwitchOp,
DAG.getConstant(JTH.First, VT));
// The SDNode we just created, which holds the value being switched on
// minus the the smallest case value, needs to be copied to a virtual
// register so it can be used as an index into the jump table in a
// subsequent basic block. This value may be smaller or larger than the
// target's pointer type, and therefore require extension or truncating.
if (MVT::getSizeInBits(VT) > MVT::getSizeInBits(TLI.getPointerTy()))
SwitchOp = DAG.getNode(ISD::TRUNCATE, TLI.getPointerTy(), SUB);
else
SwitchOp = DAG.getNode(ISD::ZERO_EXTEND, TLI.getPointerTy(), SUB);
unsigned JumpTableReg = FuncInfo.MakeReg(TLI.getPointerTy());
SDOperand CopyTo = DAG.getCopyToReg(getRoot(), JumpTableReg, SwitchOp);
JT.Reg = JumpTableReg;
// Emit the range check for the jump table, and branch to the default
// block for the switch statement if the value being switched on exceeds
// the largest case in the switch.
SDOperand CMP = DAG.getSetCC(TLI.getSetCCResultTy(), SUB,
DAG.getConstant(JTH.Last-JTH.First,VT),
ISD::SETUGT);
// Set NextBlock to be the MBB immediately after the current one, if any.
// This is used to avoid emitting unnecessary branches to the next block.
MachineBasicBlock *NextBlock = 0;
MachineFunction::iterator BBI = CurMBB;
if (++BBI != CurMBB->getParent()->end())
NextBlock = BBI;
SDOperand BrCond = DAG.getNode(ISD::BRCOND, MVT::Other, CopyTo, CMP,
DAG.getBasicBlock(JT.Default));
if (JT.MBB == NextBlock)
DAG.setRoot(BrCond);
else
DAG.setRoot(DAG.getNode(ISD::BR, MVT::Other, BrCond,
DAG.getBasicBlock(JT.MBB)));
return;
}
/// visitBitTestHeader - This function emits necessary code to produce value
/// suitable for "bit tests"
void SelectionDAGLowering::visitBitTestHeader(SelectionDAGISel::BitTestBlock &B) {
// Subtract the minimum value
SDOperand SwitchOp = getValue(B.SValue);
MVT::ValueType VT = SwitchOp.getValueType();
SDOperand SUB = DAG.getNode(ISD::SUB, VT, SwitchOp,
DAG.getConstant(B.First, VT));
// Check range
SDOperand RangeCmp = DAG.getSetCC(TLI.getSetCCResultTy(), SUB,
DAG.getConstant(B.Range, VT),
ISD::SETUGT);
SDOperand ShiftOp;
if (MVT::getSizeInBits(VT) > MVT::getSizeInBits(TLI.getShiftAmountTy()))
ShiftOp = DAG.getNode(ISD::TRUNCATE, TLI.getShiftAmountTy(), SUB);
else
ShiftOp = DAG.getNode(ISD::ZERO_EXTEND, TLI.getShiftAmountTy(), SUB);
// Make desired shift
SDOperand SwitchVal = DAG.getNode(ISD::SHL, TLI.getPointerTy(),
DAG.getConstant(1, TLI.getPointerTy()),
ShiftOp);
unsigned SwitchReg = FuncInfo.MakeReg(TLI.getPointerTy());
SDOperand CopyTo = DAG.getCopyToReg(getRoot(), SwitchReg, SwitchVal);
B.Reg = SwitchReg;
SDOperand BrRange = DAG.getNode(ISD::BRCOND, MVT::Other, CopyTo, RangeCmp,
DAG.getBasicBlock(B.Default));
// Set NextBlock to be the MBB immediately after the current one, if any.
// This is used to avoid emitting unnecessary branches to the next block.
MachineBasicBlock *NextBlock = 0;
MachineFunction::iterator BBI = CurMBB;
if (++BBI != CurMBB->getParent()->end())
NextBlock = BBI;
MachineBasicBlock* MBB = B.Cases[0].ThisBB;
if (MBB == NextBlock)
DAG.setRoot(BrRange);
else
DAG.setRoot(DAG.getNode(ISD::BR, MVT::Other, CopyTo,
DAG.getBasicBlock(MBB)));
CurMBB->addSuccessor(B.Default);
CurMBB->addSuccessor(MBB);
return;
}
/// visitBitTestCase - this function produces one "bit test"
void SelectionDAGLowering::visitBitTestCase(MachineBasicBlock* NextMBB,
unsigned Reg,
SelectionDAGISel::BitTestCase &B) {
// Emit bit tests and jumps
SDOperand SwitchVal = DAG.getCopyFromReg(getRoot(), Reg, TLI.getPointerTy());
SDOperand AndOp = DAG.getNode(ISD::AND, TLI.getPointerTy(),
SwitchVal,
DAG.getConstant(B.Mask,
TLI.getPointerTy()));
SDOperand AndCmp = DAG.getSetCC(TLI.getSetCCResultTy(), AndOp,
DAG.getConstant(0, TLI.getPointerTy()),
ISD::SETNE);
SDOperand BrAnd = DAG.getNode(ISD::BRCOND, MVT::Other, getRoot(),
AndCmp, DAG.getBasicBlock(B.TargetBB));
// Set NextBlock to be the MBB immediately after the current one, if any.
// This is used to avoid emitting unnecessary branches to the next block.
MachineBasicBlock *NextBlock = 0;
MachineFunction::iterator BBI = CurMBB;
if (++BBI != CurMBB->getParent()->end())
NextBlock = BBI;
if (NextMBB == NextBlock)
DAG.setRoot(BrAnd);
else
DAG.setRoot(DAG.getNode(ISD::BR, MVT::Other, BrAnd,
DAG.getBasicBlock(NextMBB)));
CurMBB->addSuccessor(B.TargetBB);
CurMBB->addSuccessor(NextMBB);
return;
}
void SelectionDAGLowering::visitInvoke(InvokeInst &I) {
// Retrieve successors.
MachineBasicBlock *Return = FuncInfo.MBBMap[I.getSuccessor(0)];
MachineBasicBlock *LandingPad = FuncInfo.MBBMap[I.getSuccessor(1)];
if (isa<InlineAsm>(I.getCalledValue()))
visitInlineAsm(&I);
else
LowerCallTo(&I, getValue(I.getOperand(0)), false, LandingPad);
// If the value of the invoke is used outside of its defining block, make it
// available as a virtual register.
if (!I.use_empty()) {
DenseMap<const Value*, unsigned>::iterator VMI = FuncInfo.ValueMap.find(&I);
if (VMI != FuncInfo.ValueMap.end())
DAG.setRoot(CopyValueToVirtualRegister(&I, VMI->second));
}
// Drop into normal successor.
DAG.setRoot(DAG.getNode(ISD::BR, MVT::Other, getRoot(),
DAG.getBasicBlock(Return)));
// Update successor info
CurMBB->addSuccessor(Return);
CurMBB->addSuccessor(LandingPad);
}
void SelectionDAGLowering::visitUnwind(UnwindInst &I) {
}
/// handleSmallSwitchCaseRange - Emit a series of specific tests (suitable for
/// small case ranges).
bool SelectionDAGLowering::handleSmallSwitchRange(CaseRec& CR,
CaseRecVector& WorkList,
Value* SV,
MachineBasicBlock* Default) {
Case& BackCase = *(CR.Range.second-1);
// Size is the number of Cases represented by this range.
unsigned Size = CR.Range.second - CR.Range.first;
if (Size > 3)
return false;
// Get the MachineFunction which holds the current MBB. This is used when
// inserting any additional MBBs necessary to represent the switch.
MachineFunction *CurMF = CurMBB->getParent();
// Figure out which block is immediately after the current one.
MachineBasicBlock *NextBlock = 0;
MachineFunction::iterator BBI = CR.CaseBB;
if (++BBI != CurMBB->getParent()->end())
NextBlock = BBI;
// TODO: If any two of the cases has the same destination, and if one value
// is the same as the other, but has one bit unset that the other has set,
// use bit manipulation to do two compares at once. For example:
// "if (X == 6 || X == 4)" -> "if ((X|2) == 6)"
// Rearrange the case blocks so that the last one falls through if possible.
if (NextBlock && Default != NextBlock && BackCase.BB != NextBlock) {
// The last case block won't fall through into 'NextBlock' if we emit the
// branches in this order. See if rearranging a case value would help.
for (CaseItr I = CR.Range.first, E = CR.Range.second-1; I != E; ++I) {
if (I->BB == NextBlock) {
std::swap(*I, BackCase);
break;
}
}
}
// Create a CaseBlock record representing a conditional branch to
// the Case's target mbb if the value being switched on SV is equal
// to C.
MachineBasicBlock *CurBlock = CR.CaseBB;
for (CaseItr I = CR.Range.first, E = CR.Range.second; I != E; ++I) {
MachineBasicBlock *FallThrough;
if (I != E-1) {
FallThrough = new MachineBasicBlock(CurBlock->getBasicBlock());
CurMF->getBasicBlockList().insert(BBI, FallThrough);
} else {
// If the last case doesn't match, go to the default block.
FallThrough = Default;
}
Value *RHS, *LHS, *MHS;
ISD::CondCode CC;
if (I->High == I->Low) {
// This is just small small case range :) containing exactly 1 case
CC = ISD::SETEQ;
LHS = SV; RHS = I->High; MHS = NULL;
} else {
CC = ISD::SETLE;
LHS = I->Low; MHS = SV; RHS = I->High;
}
SelectionDAGISel::CaseBlock CB(CC, LHS, RHS, MHS,
I->BB, FallThrough, CurBlock);
// If emitting the first comparison, just call visitSwitchCase to emit the
// code into the current block. Otherwise, push the CaseBlock onto the
// vector to be later processed by SDISel, and insert the node's MBB
// before the next MBB.
if (CurBlock == CurMBB)
visitSwitchCase(CB);
else
SwitchCases.push_back(CB);
CurBlock = FallThrough;
}
return true;
}
static inline bool areJTsAllowed(const TargetLowering &TLI) {
return (TLI.isOperationLegal(ISD::BR_JT, MVT::Other) ||
TLI.isOperationLegal(ISD::BRIND, MVT::Other));
}
/// handleJTSwitchCase - Emit jumptable for current switch case range
bool SelectionDAGLowering::handleJTSwitchCase(CaseRec& CR,
CaseRecVector& WorkList,
Value* SV,
MachineBasicBlock* Default) {
Case& FrontCase = *CR.Range.first;
Case& BackCase = *(CR.Range.second-1);
int64_t First = cast<ConstantInt>(FrontCase.Low)->getSExtValue();
int64_t Last = cast<ConstantInt>(BackCase.High)->getSExtValue();
uint64_t TSize = 0;
for (CaseItr I = CR.Range.first, E = CR.Range.second;
I!=E; ++I)
TSize += I->size();
if (!areJTsAllowed(TLI) || TSize <= 3)
return false;
double Density = (double)TSize / (double)((Last - First) + 1ULL);
if (Density < 0.4)
return false;
DOUT << "Lowering jump table\n"
<< "First entry: " << First << ". Last entry: " << Last << "\n"
<< "Size: " << TSize << ". Density: " << Density << "\n\n";
// Get the MachineFunction which holds the current MBB. This is used when
// inserting any additional MBBs necessary to represent the switch.
MachineFunction *CurMF = CurMBB->getParent();
// Figure out which block is immediately after the current one.
MachineBasicBlock *NextBlock = 0;
MachineFunction::iterator BBI = CR.CaseBB;
if (++BBI != CurMBB->getParent()->end())
NextBlock = BBI;
const BasicBlock *LLVMBB = CR.CaseBB->getBasicBlock();
// Create a new basic block to hold the code for loading the address
// of the jump table, and jumping to it. Update successor information;
// we will either branch to the default case for the switch, or the jump
// table.
MachineBasicBlock *JumpTableBB = new MachineBasicBlock(LLVMBB);
CurMF->getBasicBlockList().insert(BBI, JumpTableBB);
CR.CaseBB->addSuccessor(Default);
CR.CaseBB->addSuccessor(JumpTableBB);
// Build a vector of destination BBs, corresponding to each target
// of the jump table. If the value of the jump table slot corresponds to
// a case statement, push the case's BB onto the vector, otherwise, push
// the default BB.
std::vector<MachineBasicBlock*> DestBBs;
int64_t TEI = First;
for (CaseItr I = CR.Range.first, E = CR.Range.second; I != E; ++TEI) {
int64_t Low = cast<ConstantInt>(I->Low)->getSExtValue();
int64_t High = cast<ConstantInt>(I->High)->getSExtValue();
if ((Low <= TEI) && (TEI <= High)) {
DestBBs.push_back(I->BB);
if (TEI==High)
++I;
} else {
DestBBs.push_back(Default);
}
}
// Update successor info. Add one edge to each unique successor.
BitVector SuccsHandled(CR.CaseBB->getParent()->getNumBlockIDs());
for (std::vector<MachineBasicBlock*>::iterator I = DestBBs.begin(),
E = DestBBs.end(); I != E; ++I) {
if (!SuccsHandled[(*I)->getNumber()]) {
SuccsHandled[(*I)->getNumber()] = true;
JumpTableBB->addSuccessor(*I);
}
}
// Create a jump table index for this jump table, or return an existing
// one.
unsigned JTI = CurMF->getJumpTableInfo()->getJumpTableIndex(DestBBs);
// Set the jump table information so that we can codegen it as a second
// MachineBasicBlock
SelectionDAGISel::JumpTable JT(-1U, JTI, JumpTableBB, Default);
SelectionDAGISel::JumpTableHeader JTH(First, Last, SV, CR.CaseBB,
(CR.CaseBB == CurMBB));
if (CR.CaseBB == CurMBB)
visitJumpTableHeader(JT, JTH);
JTCases.push_back(SelectionDAGISel::JumpTableBlock(JTH, JT));
return true;
}
/// handleBTSplitSwitchCase - emit comparison and split binary search tree into
/// 2 subtrees.
bool SelectionDAGLowering::handleBTSplitSwitchCase(CaseRec& CR,
CaseRecVector& WorkList,
Value* SV,
MachineBasicBlock* Default) {
// Get the MachineFunction which holds the current MBB. This is used when
// inserting any additional MBBs necessary to represent the switch.
MachineFunction *CurMF = CurMBB->getParent();
// Figure out which block is immediately after the current one.
MachineBasicBlock *NextBlock = 0;
MachineFunction::iterator BBI = CR.CaseBB;
if (++BBI != CurMBB->getParent()->end())
NextBlock = BBI;
Case& FrontCase = *CR.Range.first;
Case& BackCase = *(CR.Range.second-1);
const BasicBlock *LLVMBB = CR.CaseBB->getBasicBlock();
// Size is the number of Cases represented by this range.
unsigned Size = CR.Range.second - CR.Range.first;
int64_t First = cast<ConstantInt>(FrontCase.Low)->getSExtValue();
int64_t Last = cast<ConstantInt>(BackCase.High)->getSExtValue();
double FMetric = 0;
CaseItr Pivot = CR.Range.first + Size/2;
// Select optimal pivot, maximizing sum density of LHS and RHS. This will
// (heuristically) allow us to emit JumpTable's later.
uint64_t TSize = 0;
for (CaseItr I = CR.Range.first, E = CR.Range.second;
I!=E; ++I)
TSize += I->size();
uint64_t LSize = FrontCase.size();
uint64_t RSize = TSize-LSize;
DOUT << "Selecting best pivot: \n"
<< "First: " << First << ", Last: " << Last <<"\n"
<< "LSize: " << LSize << ", RSize: " << RSize << "\n";
for (CaseItr I = CR.Range.first, J=I+1, E = CR.Range.second;
J!=E; ++I, ++J) {
int64_t LEnd = cast<ConstantInt>(I->High)->getSExtValue();
int64_t RBegin = cast<ConstantInt>(J->Low)->getSExtValue();
assert((RBegin-LEnd>=1) && "Invalid case distance");
double LDensity = (double)LSize / (double)((LEnd - First) + 1ULL);
double RDensity = (double)RSize / (double)((Last - RBegin) + 1ULL);
double Metric = Log2_64(RBegin-LEnd)*(LDensity+RDensity);
// Should always split in some non-trivial place
DOUT <<"=>Step\n"
<< "LEnd: " << LEnd << ", RBegin: " << RBegin << "\n"
<< "LDensity: " << LDensity << ", RDensity: " << RDensity << "\n"
<< "Metric: " << Metric << "\n";
if (FMetric < Metric) {
Pivot = J;
FMetric = Metric;
DOUT << "Current metric set to: " << FMetric << "\n";
}
LSize += J->size();
RSize -= J->size();
}
if (areJTsAllowed(TLI)) {
// If our case is dense we *really* should handle it earlier!
assert((FMetric > 0) && "Should handle dense range earlier!");
} else {
Pivot = CR.Range.first + Size/2;
}
CaseRange LHSR(CR.Range.first, Pivot);
CaseRange RHSR(Pivot, CR.Range.second);
Constant *C = Pivot->Low;
MachineBasicBlock *FalseBB = 0, *TrueBB = 0;
// We know that we branch to the LHS if the Value being switched on is
// less than the Pivot value, C. We use this to optimize our binary
// tree a bit, by recognizing that if SV is greater than or equal to the
// LHS's Case Value, and that Case Value is exactly one less than the
// Pivot's Value, then we can branch directly to the LHS's Target,
// rather than creating a leaf node for it.
if ((LHSR.second - LHSR.first) == 1 &&
LHSR.first->High == CR.GE &&
cast<ConstantInt>(C)->getSExtValue() ==
(cast<ConstantInt>(CR.GE)->getSExtValue() + 1LL)) {
TrueBB = LHSR.first->BB;
} else {
TrueBB = new MachineBasicBlock(LLVMBB);
CurMF->getBasicBlockList().insert(BBI, TrueBB);
WorkList.push_back(CaseRec(TrueBB, C, CR.GE, LHSR));
}
// Similar to the optimization above, if the Value being switched on is
// known to be less than the Constant CR.LT, and the current Case Value
// is CR.LT - 1, then we can branch directly to the target block for
// the current Case Value, rather than emitting a RHS leaf node for it.
if ((RHSR.second - RHSR.first) == 1 && CR.LT &&
cast<ConstantInt>(RHSR.first->Low)->getSExtValue() ==
(cast<ConstantInt>(CR.LT)->getSExtValue() - 1LL)) {
FalseBB = RHSR.first->BB;
} else {
FalseBB = new MachineBasicBlock(LLVMBB);
CurMF->getBasicBlockList().insert(BBI, FalseBB);
WorkList.push_back(CaseRec(FalseBB,CR.LT,C,RHSR));
}
// Create a CaseBlock record representing a conditional branch to
// the LHS node if the value being switched on SV is less than C.
// Otherwise, branch to LHS.
SelectionDAGISel::CaseBlock CB(ISD::SETLT, SV, C, NULL,
TrueBB, FalseBB, CR.CaseBB);
if (CR.CaseBB == CurMBB)
visitSwitchCase(CB);
else
SwitchCases.push_back(CB);
return true;
}
/// handleBitTestsSwitchCase - if current case range has few destination and
/// range span less, than machine word bitwidth, encode case range into series
/// of masks and emit bit tests with these masks.
bool SelectionDAGLowering::handleBitTestsSwitchCase(CaseRec& CR,
CaseRecVector& WorkList,
Value* SV,
MachineBasicBlock* Default){
unsigned IntPtrBits = MVT::getSizeInBits(TLI.getPointerTy());
Case& FrontCase = *CR.Range.first;
Case& BackCase = *(CR.Range.second-1);
// Get the MachineFunction which holds the current MBB. This is used when
// inserting any additional MBBs necessary to represent the switch.
MachineFunction *CurMF = CurMBB->getParent();
unsigned numCmps = 0;
for (CaseItr I = CR.Range.first, E = CR.Range.second;
I!=E; ++I) {
// Single case counts one, case range - two.
if (I->Low == I->High)
numCmps +=1;
else
numCmps +=2;
}
// Count unique destinations
SmallSet<MachineBasicBlock*, 4> Dests;
for (CaseItr I = CR.Range.first, E = CR.Range.second; I!=E; ++I) {
Dests.insert(I->BB);
if (Dests.size() > 3)
// Don't bother the code below, if there are too much unique destinations
return false;
}
DOUT << "Total number of unique destinations: " << Dests.size() << "\n"
<< "Total number of comparisons: " << numCmps << "\n";
// Compute span of values.
Constant* minValue = FrontCase.Low;
Constant* maxValue = BackCase.High;
uint64_t range = cast<ConstantInt>(maxValue)->getSExtValue() -
cast<ConstantInt>(minValue)->getSExtValue();
DOUT << "Compare range: " << range << "\n"
<< "Low bound: " << cast<ConstantInt>(minValue)->getSExtValue() << "\n"
<< "High bound: " << cast<ConstantInt>(maxValue)->getSExtValue() << "\n";
if (range>=IntPtrBits ||
(!(Dests.size() == 1 && numCmps >= 3) &&
!(Dests.size() == 2 && numCmps >= 5) &&
!(Dests.size() >= 3 && numCmps >= 6)))
return false;
DOUT << "Emitting bit tests\n";
int64_t lowBound = 0;
// Optimize the case where all the case values fit in a
// word without having to subtract minValue. In this case,
// we can optimize away the subtraction.
if (cast<ConstantInt>(minValue)->getSExtValue() >= 0 &&
cast<ConstantInt>(maxValue)->getSExtValue() < IntPtrBits) {
range = cast<ConstantInt>(maxValue)->getSExtValue();
} else {
lowBound = cast<ConstantInt>(minValue)->getSExtValue();
}
CaseBitsVector CasesBits;
unsigned i, count = 0;
for (CaseItr I = CR.Range.first, E = CR.Range.second; I!=E; ++I) {
MachineBasicBlock* Dest = I->BB;
for (i = 0; i < count; ++i)
if (Dest == CasesBits[i].BB)
break;
if (i == count) {
assert((count < 3) && "Too much destinations to test!");
CasesBits.push_back(CaseBits(0, Dest, 0));
count++;
}
uint64_t lo = cast<ConstantInt>(I->Low)->getSExtValue() - lowBound;
uint64_t hi = cast<ConstantInt>(I->High)->getSExtValue() - lowBound;
for (uint64_t j = lo; j <= hi; j++) {
CasesBits[i].Mask |= 1ULL << j;
CasesBits[i].Bits++;
}
}
std::sort(CasesBits.begin(), CasesBits.end(), CaseBitsCmp());
SelectionDAGISel::BitTestInfo BTC;
// Figure out which block is immediately after the current one.
MachineFunction::iterator BBI = CR.CaseBB;
++BBI;
const BasicBlock *LLVMBB = CR.CaseBB->getBasicBlock();
DOUT << "Cases:\n";
for (unsigned i = 0, e = CasesBits.size(); i!=e; ++i) {
DOUT << "Mask: " << CasesBits[i].Mask << ", Bits: " << CasesBits[i].Bits
<< ", BB: " << CasesBits[i].BB << "\n";
MachineBasicBlock *CaseBB = new MachineBasicBlock(LLVMBB);
CurMF->getBasicBlockList().insert(BBI, CaseBB);
BTC.push_back(SelectionDAGISel::BitTestCase(CasesBits[i].Mask,
CaseBB,
CasesBits[i].BB));
}
SelectionDAGISel::BitTestBlock BTB(lowBound, range, SV,
-1U, (CR.CaseBB == CurMBB),
CR.CaseBB, Default, BTC);
if (CR.CaseBB == CurMBB)
visitBitTestHeader(BTB);
BitTestCases.push_back(BTB);
return true;
}
// Clusterify - Transform simple list of Cases into list of CaseRange's
unsigned SelectionDAGLowering::Clusterify(CaseVector& Cases,
const SwitchInst& SI) {
unsigned numCmps = 0;
// Start with "simple" cases
for (unsigned i = 1; i < SI.getNumSuccessors(); ++i) {
MachineBasicBlock *SMBB = FuncInfo.MBBMap[SI.getSuccessor(i)];
Cases.push_back(Case(SI.getSuccessorValue(i),
SI.getSuccessorValue(i),
SMBB));
}
std::sort(Cases.begin(), Cases.end(), CaseCmp());
// Merge case into clusters
if (Cases.size()>=2)
// Must recompute end() each iteration because it may be
// invalidated by erase if we hold on to it
for (CaseItr I=Cases.begin(), J=++(Cases.begin()); J!=Cases.end(); ) {
int64_t nextValue = cast<ConstantInt>(J->Low)->getSExtValue();
int64_t currentValue = cast<ConstantInt>(I->High)->getSExtValue();
MachineBasicBlock* nextBB = J->BB;
MachineBasicBlock* currentBB = I->BB;
// If the two neighboring cases go to the same destination, merge them
// into a single case.
if ((nextValue-currentValue==1) && (currentBB == nextBB)) {
I->High = J->High;
J = Cases.erase(J);
} else {
I = J++;
}
}
for (CaseItr I=Cases.begin(), E=Cases.end(); I!=E; ++I, ++numCmps) {
if (I->Low != I->High)
// A range counts double, since it requires two compares.
++numCmps;
}
return numCmps;
}
void SelectionDAGLowering::visitSwitch(SwitchInst &SI) {
// Figure out which block is immediately after the current one.
MachineBasicBlock *NextBlock = 0;
MachineFunction::iterator BBI = CurMBB;
MachineBasicBlock *Default = FuncInfo.MBBMap[SI.getDefaultDest()];
// If there is only the default destination, branch to it if it is not the
// next basic block. Otherwise, just fall through.
if (SI.getNumOperands() == 2) {
// Update machine-CFG edges.
// If this is not a fall-through branch, emit the branch.
if (Default != NextBlock)
DAG.setRoot(DAG.getNode(ISD::BR, MVT::Other, getRoot(),
DAG.getBasicBlock(Default)));
CurMBB->addSuccessor(Default);
return;
}
// If there are any non-default case statements, create a vector of Cases
// representing each one, and sort the vector so that we can efficiently
// create a binary search tree from them.
CaseVector Cases;
unsigned numCmps = Clusterify(Cases, SI);
DOUT << "Clusterify finished. Total clusters: " << Cases.size()
<< ". Total compares: " << numCmps << "\n";
// Get the Value to be switched on and default basic blocks, which will be
// inserted into CaseBlock records, representing basic blocks in the binary
// search tree.
Value *SV = SI.getOperand(0);
// Push the initial CaseRec onto the worklist
CaseRecVector WorkList;
WorkList.push_back(CaseRec(CurMBB,0,0,CaseRange(Cases.begin(),Cases.end())));
while (!WorkList.empty()) {
// Grab a record representing a case range to process off the worklist
CaseRec CR = WorkList.back();
WorkList.pop_back();
if (handleBitTestsSwitchCase(CR, WorkList, SV, Default))
continue;
// If the range has few cases (two or less) emit a series of specific
// tests.
if (handleSmallSwitchRange(CR, WorkList, SV, Default))
continue;
// If the switch has more than 5 blocks, and at least 40% dense, and the
// target supports indirect branches, then emit a jump table rather than
// lowering the switch to a binary tree of conditional branches.
if (handleJTSwitchCase(CR, WorkList, SV, Default))
continue;
// Emit binary tree. We need to pick a pivot, and push left and right ranges
// onto the worklist. Leafs are handled via handleSmallSwitchRange() call.
handleBTSplitSwitchCase(CR, WorkList, SV, Default);
}
}
void SelectionDAGLowering::visitSub(User &I) {
// -0.0 - X --> fneg
const Type *Ty = I.getType();
if (isa<VectorType>(Ty)) {
if (ConstantVector *CV = dyn_cast<ConstantVector>(I.getOperand(0))) {
const VectorType *DestTy = cast<VectorType>(I.getType());
const Type *ElTy = DestTy->getElementType();
if (ElTy->isFloatingPoint()) {
unsigned VL = DestTy->getNumElements();
std::vector<Constant*> NZ(VL, ConstantFP::getNegativeZero(ElTy));
Constant *CNZ = ConstantVector::get(&NZ[0], NZ.size());
if (CV == CNZ) {
SDOperand Op2 = getValue(I.getOperand(1));
setValue(&I, DAG.getNode(ISD::FNEG, Op2.getValueType(), Op2));
return;
}
}
}
}
if (Ty->isFloatingPoint()) {
if (ConstantFP *CFP = dyn_cast<ConstantFP>(I.getOperand(0)))
if (CFP->isExactlyValue(ConstantFP::getNegativeZero(Ty)->getValueAPF())) {
SDOperand Op2 = getValue(I.getOperand(1));
setValue(&I, DAG.getNode(ISD::FNEG, Op2.getValueType(), Op2));
return;
}
}
visitBinary(I, Ty->isFPOrFPVector() ? ISD::FSUB : ISD::SUB);
}
void SelectionDAGLowering::visitBinary(User &I, unsigned OpCode) {
SDOperand Op1 = getValue(I.getOperand(0));
SDOperand Op2 = getValue(I.getOperand(1));
setValue(&I, DAG.getNode(OpCode, Op1.getValueType(), Op1, Op2));
}
void SelectionDAGLowering::visitShift(User &I, unsigned Opcode) {
SDOperand Op1 = getValue(I.getOperand(0));
SDOperand Op2 = getValue(I.getOperand(1));
if (MVT::getSizeInBits(TLI.getShiftAmountTy()) <
MVT::getSizeInBits(Op2.getValueType()))
Op2 = DAG.getNode(ISD::TRUNCATE, TLI.getShiftAmountTy(), Op2);
else if (TLI.getShiftAmountTy() > Op2.getValueType())
Op2 = DAG.getNode(ISD::ANY_EXTEND, TLI.getShiftAmountTy(), Op2);
setValue(&I, DAG.getNode(Opcode, Op1.getValueType(), Op1, Op2));
}
void SelectionDAGLowering::visitICmp(User &I) {
ICmpInst::Predicate predicate = ICmpInst::BAD_ICMP_PREDICATE;
if (ICmpInst *IC = dyn_cast<ICmpInst>(&I))
predicate = IC->getPredicate();
else if (ConstantExpr *IC = dyn_cast<ConstantExpr>(&I))
predicate = ICmpInst::Predicate(IC->getPredicate());
SDOperand Op1 = getValue(I.getOperand(0));
SDOperand Op2 = getValue(I.getOperand(1));
ISD::CondCode Opcode;
switch (predicate) {
case ICmpInst::ICMP_EQ : Opcode = ISD::SETEQ; break;
case ICmpInst::ICMP_NE : Opcode = ISD::SETNE; break;
case ICmpInst::ICMP_UGT : Opcode = ISD::SETUGT; break;
case ICmpInst::ICMP_UGE : Opcode = ISD::SETUGE; break;
case ICmpInst::ICMP_ULT : Opcode = ISD::SETULT; break;
case ICmpInst::ICMP_ULE : Opcode = ISD::SETULE; break;
case ICmpInst::ICMP_SGT : Opcode = ISD::SETGT; break;
case ICmpInst::ICMP_SGE : Opcode = ISD::SETGE; break;
case ICmpInst::ICMP_SLT : Opcode = ISD::SETLT; break;
case ICmpInst::ICMP_SLE : Opcode = ISD::SETLE; break;
default:
assert(!"Invalid ICmp predicate value");
Opcode = ISD::SETEQ;
break;
}
setValue(&I, DAG.getSetCC(MVT::i1, Op1, Op2, Opcode));
}
void SelectionDAGLowering::visitFCmp(User &I) {
FCmpInst::Predicate predicate = FCmpInst::BAD_FCMP_PREDICATE;
if (FCmpInst *FC = dyn_cast<FCmpInst>(&I))
predicate = FC->getPredicate();
else if (ConstantExpr *FC = dyn_cast<ConstantExpr>(&I))
predicate = FCmpInst::Predicate(FC->getPredicate());
SDOperand Op1 = getValue(I.getOperand(0));
SDOperand Op2 = getValue(I.getOperand(1));
ISD::CondCode Condition, FOC, FPC;
switch (predicate) {
case FCmpInst::FCMP_FALSE: FOC = FPC = ISD::SETFALSE; break;
case FCmpInst::FCMP_OEQ: FOC = ISD::SETEQ; FPC = ISD::SETOEQ; break;
case FCmpInst::FCMP_OGT: FOC = ISD::SETGT; FPC = ISD::SETOGT; break;
case FCmpInst::FCMP_OGE: FOC = ISD::SETGE; FPC = ISD::SETOGE; break;
case FCmpInst::FCMP_OLT: FOC = ISD::SETLT; FPC = ISD::SETOLT; break;
case FCmpInst::FCMP_OLE: FOC = ISD::SETLE; FPC = ISD::SETOLE; break;
case FCmpInst::FCMP_ONE: FOC = ISD::SETNE; FPC = ISD::SETONE; break;
case FCmpInst::FCMP_ORD: FOC = ISD::SETEQ; FPC = ISD::SETO; break;
case FCmpInst::FCMP_UNO: FOC = ISD::SETNE; FPC = ISD::SETUO; break;
case FCmpInst::FCMP_UEQ: FOC = ISD::SETEQ; FPC = ISD::SETUEQ; break;
case FCmpInst::FCMP_UGT: FOC = ISD::SETGT; FPC = ISD::SETUGT; break;
case FCmpInst::FCMP_UGE: FOC = ISD::SETGE; FPC = ISD::SETUGE; break;
case FCmpInst::FCMP_ULT: FOC = ISD::SETLT; FPC = ISD::SETULT; break;
case FCmpInst::FCMP_ULE: FOC = ISD::SETLE; FPC = ISD::SETULE; break;
case FCmpInst::FCMP_UNE: FOC = ISD::SETNE; FPC = ISD::SETUNE; break;
case FCmpInst::FCMP_TRUE: FOC = FPC = ISD::SETTRUE; break;
default:
assert(!"Invalid FCmp predicate value");
FOC = FPC = ISD::SETFALSE;
break;
}
if (FiniteOnlyFPMath())
Condition = FOC;
else
Condition = FPC;
setValue(&I, DAG.getSetCC(MVT::i1, Op1, Op2, Condition));
}
void SelectionDAGLowering::visitSelect(User &I) {
SDOperand Cond = getValue(I.getOperand(0));
SDOperand TrueVal = getValue(I.getOperand(1));
SDOperand FalseVal = getValue(I.getOperand(2));
setValue(&I, DAG.getNode(ISD::SELECT, TrueVal.getValueType(), Cond,
TrueVal, FalseVal));
}
void SelectionDAGLowering::visitTrunc(User &I) {
// TruncInst cannot be a no-op cast because sizeof(src) > sizeof(dest).
SDOperand N = getValue(I.getOperand(0));
MVT::ValueType DestVT = TLI.getValueType(I.getType());
setValue(&I, DAG.getNode(ISD::TRUNCATE, DestVT, N));
}
void SelectionDAGLowering::visitZExt(User &I) {
// ZExt cannot be a no-op cast because sizeof(src) < sizeof(dest).
// ZExt also can't be a cast to bool for same reason. So, nothing much to do
SDOperand N = getValue(I.getOperand(0));
MVT::ValueType DestVT = TLI.getValueType(I.getType());
setValue(&I, DAG.getNode(ISD::ZERO_EXTEND, DestVT, N));
}
void SelectionDAGLowering::visitSExt(User &I) {
// SExt cannot be a no-op cast because sizeof(src) < sizeof(dest).
// SExt also can't be a cast to bool for same reason. So, nothing much to do
SDOperand N = getValue(I.getOperand(0));
MVT::ValueType DestVT = TLI.getValueType(I.getType());
setValue(&I, DAG.getNode(ISD::SIGN_EXTEND, DestVT, N));
}
void SelectionDAGLowering::visitFPTrunc(User &I) {
// FPTrunc is never a no-op cast, no need to check
SDOperand N = getValue(I.getOperand(0));
MVT::ValueType DestVT = TLI.getValueType(I.getType());
setValue(&I, DAG.getNode(ISD::FP_ROUND, DestVT, N, DAG.getIntPtrConstant(0)));
}
void SelectionDAGLowering::visitFPExt(User &I){
// FPTrunc is never a no-op cast, no need to check
SDOperand N = getValue(I.getOperand(0));
MVT::ValueType DestVT = TLI.getValueType(I.getType());
setValue(&I, DAG.getNode(ISD::FP_EXTEND, DestVT, N));
}
void SelectionDAGLowering::visitFPToUI(User &I) {
// FPToUI is never a no-op cast, no need to check
SDOperand N = getValue(I.getOperand(0));
MVT::ValueType DestVT = TLI.getValueType(I.getType());
setValue(&I, DAG.getNode(ISD::FP_TO_UINT, DestVT, N));
}
void SelectionDAGLowering::visitFPToSI(User &I) {
// FPToSI is never a no-op cast, no need to check
SDOperand N = getValue(I.getOperand(0));
MVT::ValueType DestVT = TLI.getValueType(I.getType());
setValue(&I, DAG.getNode(ISD::FP_TO_SINT, DestVT, N));
}
void SelectionDAGLowering::visitUIToFP(User &I) {
// UIToFP is never a no-op cast, no need to check
SDOperand N = getValue(I.getOperand(0));
MVT::ValueType DestVT = TLI.getValueType(I.getType());
setValue(&I, DAG.getNode(ISD::UINT_TO_FP, DestVT, N));
}
void SelectionDAGLowering::visitSIToFP(User &I){
// UIToFP is never a no-op cast, no need to check
SDOperand N = getValue(I.getOperand(0));
MVT::ValueType DestVT = TLI.getValueType(I.getType());
setValue(&I, DAG.getNode(ISD::SINT_TO_FP, DestVT, N));
}
void SelectionDAGLowering::visitPtrToInt(User &I) {
// What to do depends on the size of the integer and the size of the pointer.
// We can either truncate, zero extend, or no-op, accordingly.
SDOperand N = getValue(I.getOperand(0));
MVT::ValueType SrcVT = N.getValueType();
MVT::ValueType DestVT = TLI.getValueType(I.getType());
SDOperand Result;
if (MVT::getSizeInBits(DestVT) < MVT::getSizeInBits(SrcVT))
Result = DAG.getNode(ISD::TRUNCATE, DestVT, N);
else
// Note: ZERO_EXTEND can handle cases where the sizes are equal too
Result = DAG.getNode(ISD::ZERO_EXTEND, DestVT, N);
setValue(&I, Result);
}
void SelectionDAGLowering::visitIntToPtr(User &I) {
// What to do depends on the size of the integer and the size of the pointer.
// We can either truncate, zero extend, or no-op, accordingly.
SDOperand N = getValue(I.getOperand(0));
MVT::ValueType SrcVT = N.getValueType();
MVT::ValueType DestVT = TLI.getValueType(I.getType());
if (MVT::getSizeInBits(DestVT) < MVT::getSizeInBits(SrcVT))
setValue(&I, DAG.getNode(ISD::TRUNCATE, DestVT, N));
else
// Note: ZERO_EXTEND can handle cases where the sizes are equal too
setValue(&I, DAG.getNode(ISD::ZERO_EXTEND, DestVT, N));
}
void SelectionDAGLowering::visitBitCast(User &I) {
SDOperand N = getValue(I.getOperand(0));
MVT::ValueType DestVT = TLI.getValueType(I.getType());
// BitCast assures us that source and destination are the same size so this
// is either a BIT_CONVERT or a no-op.
if (DestVT != N.getValueType())
setValue(&I, DAG.getNode(ISD::BIT_CONVERT, DestVT, N)); // convert types
else
setValue(&I, N); // noop cast.
}
void SelectionDAGLowering::visitInsertElement(User &I) {
SDOperand InVec = getValue(I.getOperand(0));
SDOperand InVal = getValue(I.getOperand(1));
SDOperand InIdx = DAG.getNode(ISD::ZERO_EXTEND, TLI.getPointerTy(),
getValue(I.getOperand(2)));
setValue(&I, DAG.getNode(ISD::INSERT_VECTOR_ELT,
TLI.getValueType(I.getType()),
InVec, InVal, InIdx));
}
void SelectionDAGLowering::visitExtractElement(User &I) {
SDOperand InVec = getValue(I.getOperand(0));
SDOperand InIdx = DAG.getNode(ISD::ZERO_EXTEND, TLI.getPointerTy(),
getValue(I.getOperand(1)));
setValue(&I, DAG.getNode(ISD::EXTRACT_VECTOR_ELT,
TLI.getValueType(I.getType()), InVec, InIdx));
}
void SelectionDAGLowering::visitShuffleVector(User &I) {
SDOperand V1 = getValue(I.getOperand(0));
SDOperand V2 = getValue(I.getOperand(1));
SDOperand Mask = getValue(I.getOperand(2));
setValue(&I, DAG.getNode(ISD::VECTOR_SHUFFLE,
TLI.getValueType(I.getType()),
V1, V2, Mask));
}
void SelectionDAGLowering::visitGetElementPtr(User &I) {
SDOperand N = getValue(I.getOperand(0));
const Type *Ty = I.getOperand(0)->getType();
for (GetElementPtrInst::op_iterator OI = I.op_begin()+1, E = I.op_end();
OI != E; ++OI) {
Value *Idx = *OI;
if (const StructType *StTy = dyn_cast<StructType>(Ty)) {
unsigned Field = cast<ConstantInt>(Idx)->getZExtValue();
if (Field) {
// N = N + Offset
uint64_t Offset = TD->getStructLayout(StTy)->getElementOffset(Field);
N = DAG.getNode(ISD::ADD, N.getValueType(), N,
DAG.getIntPtrConstant(Offset));
}
Ty = StTy->getElementType(Field);
} else {
Ty = cast<SequentialType>(Ty)->getElementType();
// If this is a constant subscript, handle it quickly.
if (ConstantInt *CI = dyn_cast<ConstantInt>(Idx)) {
if (CI->getZExtValue() == 0) continue;
uint64_t Offs =
TD->getABITypeSize(Ty)*cast<ConstantInt>(CI)->getSExtValue();
N = DAG.getNode(ISD::ADD, N.getValueType(), N,
DAG.getIntPtrConstant(Offs));
continue;
}
// N = N + Idx * ElementSize;
uint64_t ElementSize = TD->getABITypeSize(Ty);
SDOperand IdxN = getValue(Idx);
// If the index is smaller or larger than intptr_t, truncate or extend
// it.
if (IdxN.getValueType() < N.getValueType()) {
IdxN = DAG.getNode(ISD::SIGN_EXTEND, N.getValueType(), IdxN);
} else if (IdxN.getValueType() > N.getValueType())
IdxN = DAG.getNode(ISD::TRUNCATE, N.getValueType(), IdxN);
// If this is a multiply by a power of two, turn it into a shl
// immediately. This is a very common case.
if (isPowerOf2_64(ElementSize)) {
unsigned Amt = Log2_64(ElementSize);
IdxN = DAG.getNode(ISD::SHL, N.getValueType(), IdxN,
DAG.getConstant(Amt, TLI.getShiftAmountTy()));
N = DAG.getNode(ISD::ADD, N.getValueType(), N, IdxN);
continue;
}
SDOperand Scale = DAG.getIntPtrConstant(ElementSize);
IdxN = DAG.getNode(ISD::MUL, N.getValueType(), IdxN, Scale);
N = DAG.getNode(ISD::ADD, N.getValueType(), N, IdxN);
}
}
setValue(&I, N);
}
void SelectionDAGLowering::visitAlloca(AllocaInst &I) {
// If this is a fixed sized alloca in the entry block of the function,
// allocate it statically on the stack.
if (FuncInfo.StaticAllocaMap.count(&I))
return; // getValue will auto-populate this.
const Type *Ty = I.getAllocatedType();
uint64_t TySize = TLI.getTargetData()->getABITypeSize(Ty);
unsigned Align =
std::max((unsigned)TLI.getTargetData()->getPrefTypeAlignment(Ty),
I.getAlignment());
SDOperand AllocSize = getValue(I.getArraySize());
MVT::ValueType IntPtr = TLI.getPointerTy();
if (IntPtr < AllocSize.getValueType())
AllocSize = DAG.getNode(ISD::TRUNCATE, IntPtr, AllocSize);
else if (IntPtr > AllocSize.getValueType())
AllocSize = DAG.getNode(ISD::ZERO_EXTEND, IntPtr, AllocSize);
AllocSize = DAG.getNode(ISD::MUL, IntPtr, AllocSize,
DAG.getIntPtrConstant(TySize));
// Handle alignment. If the requested alignment is less than or equal to
// the stack alignment, ignore it. If the size is greater than or equal to
// the stack alignment, we note this in the DYNAMIC_STACKALLOC node.
unsigned StackAlign =
TLI.getTargetMachine().getFrameInfo()->getStackAlignment();
if (Align <= StackAlign)
Align = 0;
// Round the size of the allocation up to the stack alignment size
// by add SA-1 to the size.
AllocSize = DAG.getNode(ISD::ADD, AllocSize.getValueType(), AllocSize,
DAG.getIntPtrConstant(StackAlign-1));
// Mask out the low bits for alignment purposes.
AllocSize = DAG.getNode(ISD::AND, AllocSize.getValueType(), AllocSize,
DAG.getIntPtrConstant(~(uint64_t)(StackAlign-1)));
SDOperand Ops[] = { getRoot(), AllocSize, DAG.getIntPtrConstant(Align) };
const MVT::ValueType *VTs = DAG.getNodeValueTypes(AllocSize.getValueType(),
MVT::Other);
SDOperand DSA = DAG.getNode(ISD::DYNAMIC_STACKALLOC, VTs, 2, Ops, 3);
setValue(&I, DSA);
DAG.setRoot(DSA.getValue(1));
// Inform the Frame Information that we have just allocated a variable-sized
// object.
CurMBB->getParent()->getFrameInfo()->CreateVariableSizedObject();
}
void SelectionDAGLowering::visitLoad(LoadInst &I) {
SDOperand Ptr = getValue(I.getOperand(0));
SDOperand Root;
if (I.isVolatile())
Root = getRoot();
else {
// Do not serialize non-volatile loads against each other.
Root = DAG.getRoot();
}
setValue(&I, getLoadFrom(I.getType(), Ptr, I.getOperand(0),
Root, I.isVolatile(), I.getAlignment()));
}
SDOperand SelectionDAGLowering::getLoadFrom(const Type *Ty, SDOperand Ptr,
const Value *SV, SDOperand Root,
bool isVolatile,
unsigned Alignment) {
SDOperand L =
DAG.getLoad(TLI.getValueType(Ty), Root, Ptr, SV, 0,
isVolatile, Alignment);
if (isVolatile)
DAG.setRoot(L.getValue(1));
else
PendingLoads.push_back(L.getValue(1));
return L;
}
void SelectionDAGLowering::visitStore(StoreInst &I) {
Value *SrcV = I.getOperand(0);
SDOperand Src = getValue(SrcV);
SDOperand Ptr = getValue(I.getOperand(1));
DAG.setRoot(DAG.getStore(getRoot(), Src, Ptr, I.getOperand(1), 0,
I.isVolatile(), I.getAlignment()));
}
/// visitTargetIntrinsic - Lower a call of a target intrinsic to an INTRINSIC
/// node.
void SelectionDAGLowering::visitTargetIntrinsic(CallInst &I,
unsigned Intrinsic) {
bool HasChain = !I.doesNotAccessMemory();
bool OnlyLoad = HasChain && I.onlyReadsMemory();
// Build the operand list.
SmallVector<SDOperand, 8> Ops;
if (HasChain) { // If this intrinsic has side-effects, chainify it.
if (OnlyLoad) {
// We don't need to serialize loads against other loads.
Ops.push_back(DAG.getRoot());
} else {
Ops.push_back(getRoot());
}
}
// Add the intrinsic ID as an integer operand.
Ops.push_back(DAG.getConstant(Intrinsic, TLI.getPointerTy()));
// Add all operands of the call to the operand list.
for (unsigned i = 1, e = I.getNumOperands(); i != e; ++i) {
SDOperand Op = getValue(I.getOperand(i));
assert(TLI.isTypeLegal(Op.getValueType()) &&
"Intrinsic uses a non-legal type?");
Ops.push_back(Op);
}
std::vector<MVT::ValueType> VTs;
if (I.getType() != Type::VoidTy) {
MVT::ValueType VT = TLI.getValueType(I.getType());
if (MVT::isVector(VT)) {
const VectorType *DestTy = cast<VectorType>(I.getType());
MVT::ValueType EltVT = TLI.getValueType(DestTy->getElementType());
VT = MVT::getVectorType(EltVT, DestTy->getNumElements());
assert(VT != MVT::Other && "Intrinsic uses a non-legal type?");
}
assert(TLI.isTypeLegal(VT) && "Intrinsic uses a non-legal type?");
VTs.push_back(VT);
}
if (HasChain)
VTs.push_back(MVT::Other);
const MVT::ValueType *VTList = DAG.getNodeValueTypes(VTs);
// Create the node.
SDOperand Result;
if (!HasChain)
Result = DAG.getNode(ISD::INTRINSIC_WO_CHAIN, VTList, VTs.size(),
&Ops[0], Ops.size());
else if (I.getType() != Type::VoidTy)
Result = DAG.getNode(ISD::INTRINSIC_W_CHAIN, VTList, VTs.size(),
&Ops[0], Ops.size());
else
Result = DAG.getNode(ISD::INTRINSIC_VOID, VTList, VTs.size(),
&Ops[0], Ops.size());
if (HasChain) {
SDOperand Chain = Result.getValue(Result.Val->getNumValues()-1);
if (OnlyLoad)
PendingLoads.push_back(Chain);
else
DAG.setRoot(Chain);
}
if (I.getType() != Type::VoidTy) {
if (const VectorType *PTy = dyn_cast<VectorType>(I.getType())) {
MVT::ValueType VT = TLI.getValueType(PTy);
Result = DAG.getNode(ISD::BIT_CONVERT, VT, Result);
}
setValue(&I, Result);
}
}
/// ExtractTypeInfo - Returns the type info, possibly bitcast, encoded in V.
static GlobalVariable *ExtractTypeInfo (Value *V) {
V = IntrinsicInst::StripPointerCasts(V);
GlobalVariable *GV = dyn_cast<GlobalVariable>(V);
assert (GV || isa<ConstantPointerNull>(V) &&
"TypeInfo must be a global variable or NULL");
return GV;
}
/// addCatchInfo - Extract the personality and type infos from an eh.selector
/// call, and add them to the specified machine basic block.
static void addCatchInfo(CallInst &I, MachineModuleInfo *MMI,
MachineBasicBlock *MBB) {
// Inform the MachineModuleInfo of the personality for this landing pad.
ConstantExpr *CE = cast<ConstantExpr>(I.getOperand(2));
assert(CE->getOpcode() == Instruction::BitCast &&
isa<Function>(CE->getOperand(0)) &&
"Personality should be a function");
MMI->addPersonality(MBB, cast<Function>(CE->getOperand(0)));
// Gather all the type infos for this landing pad and pass them along to
// MachineModuleInfo.
std::vector<GlobalVariable *> TyInfo;
unsigned N = I.getNumOperands();
for (unsigned i = N - 1; i > 2; --i) {
if (ConstantInt *CI = dyn_cast<ConstantInt>(I.getOperand(i))) {
unsigned FilterLength = CI->getZExtValue();
unsigned FirstCatch = i + FilterLength + !FilterLength;
assert (FirstCatch <= N && "Invalid filter length");
if (FirstCatch < N) {
TyInfo.reserve(N - FirstCatch);
for (unsigned j = FirstCatch; j < N; ++j)
TyInfo.push_back(ExtractTypeInfo(I.getOperand(j)));
MMI->addCatchTypeInfo(MBB, TyInfo);
TyInfo.clear();
}
if (!FilterLength) {
// Cleanup.
MMI->addCleanup(MBB);
} else {
// Filter.
TyInfo.reserve(FilterLength - 1);
for (unsigned j = i + 1; j < FirstCatch; ++j)
TyInfo.push_back(ExtractTypeInfo(I.getOperand(j)));
MMI->addFilterTypeInfo(MBB, TyInfo);
TyInfo.clear();
}
N = i;
}
}
if (N > 3) {
TyInfo.reserve(N - 3);
for (unsigned j = 3; j < N; ++j)
TyInfo.push_back(ExtractTypeInfo(I.getOperand(j)));
MMI->addCatchTypeInfo(MBB, TyInfo);
}
}
/// visitIntrinsicCall - Lower the call to the specified intrinsic function. If
/// we want to emit this as a call to a named external function, return the name
/// otherwise lower it and return null.
const char *
SelectionDAGLowering::visitIntrinsicCall(CallInst &I, unsigned Intrinsic) {
switch (Intrinsic) {
default:
// By default, turn this into a target intrinsic node.
visitTargetIntrinsic(I, Intrinsic);
return 0;
case Intrinsic::vastart: visitVAStart(I); return 0;
case Intrinsic::vaend: visitVAEnd(I); return 0;
case Intrinsic::vacopy: visitVACopy(I); return 0;
case Intrinsic::returnaddress:
setValue(&I, DAG.getNode(ISD::RETURNADDR, TLI.getPointerTy(),
getValue(I.getOperand(1))));
return 0;
case Intrinsic::frameaddress:
setValue(&I, DAG.getNode(ISD::FRAMEADDR, TLI.getPointerTy(),
getValue(I.getOperand(1))));
return 0;
case Intrinsic::setjmp:
return "_setjmp"+!TLI.usesUnderscoreSetJmp();
break;
case Intrinsic::longjmp:
return "_longjmp"+!TLI.usesUnderscoreLongJmp();
break;
case Intrinsic::memcpy_i32:
case Intrinsic::memcpy_i64:
visitMemIntrinsic(I, ISD::MEMCPY);
return 0;
case Intrinsic::memset_i32:
case Intrinsic::memset_i64:
visitMemIntrinsic(I, ISD::MEMSET);
return 0;
case Intrinsic::memmove_i32:
case Intrinsic::memmove_i64:
visitMemIntrinsic(I, ISD::MEMMOVE);
return 0;
case Intrinsic::dbg_stoppoint: {
MachineModuleInfo *MMI = DAG.getMachineModuleInfo();
DbgStopPointInst &SPI = cast<DbgStopPointInst>(I);
if (MMI && SPI.getContext() && MMI->Verify(SPI.getContext())) {
SDOperand Ops[5];
Ops[0] = getRoot();
Ops[1] = getValue(SPI.getLineValue());
Ops[2] = getValue(SPI.getColumnValue());
DebugInfoDesc *DD = MMI->getDescFor(SPI.getContext());
assert(DD && "Not a debug information descriptor");
CompileUnitDesc *CompileUnit = cast<CompileUnitDesc>(DD);
Ops[3] = DAG.getString(CompileUnit->getFileName());
Ops[4] = DAG.getString(CompileUnit->getDirectory());
DAG.setRoot(DAG.getNode(ISD::LOCATION, MVT::Other, Ops, 5));
}
return 0;
}
case Intrinsic::dbg_region_start: {
MachineModuleInfo *MMI = DAG.getMachineModuleInfo();
DbgRegionStartInst &RSI = cast<DbgRegionStartInst>(I);
if (MMI && RSI.getContext() && MMI->Verify(RSI.getContext())) {
unsigned LabelID = MMI->RecordRegionStart(RSI.getContext());
DAG.setRoot(DAG.getNode(ISD::LABEL, MVT::Other, getRoot(),
DAG.getConstant(LabelID, MVT::i32),
DAG.getConstant(0, MVT::i32)));
}
return 0;
}
case Intrinsic::dbg_region_end: {
MachineModuleInfo *MMI = DAG.getMachineModuleInfo();
DbgRegionEndInst &REI = cast<DbgRegionEndInst>(I);
if (MMI && REI.getContext() && MMI->Verify(REI.getContext())) {
unsigned LabelID = MMI->RecordRegionEnd(REI.getContext());
DAG.setRoot(DAG.getNode(ISD::LABEL, MVT::Other, getRoot(),
DAG.getConstant(LabelID, MVT::i32),
DAG.getConstant(0, MVT::i32)));
}
return 0;
}
case Intrinsic::dbg_func_start: {
MachineModuleInfo *MMI = DAG.getMachineModuleInfo();
if (!MMI) return 0;
DbgFuncStartInst &FSI = cast<DbgFuncStartInst>(I);
Value *SP = FSI.getSubprogram();
if (SP && MMI->Verify(SP)) {
// llvm.dbg.func.start implicitly defines a dbg_stoppoint which is
// what (most?) gdb expects.
DebugInfoDesc *DD = MMI->getDescFor(SP);
assert(DD && "Not a debug information descriptor");
SubprogramDesc *Subprogram = cast<SubprogramDesc>(DD);
const CompileUnitDesc *CompileUnit = Subprogram->getFile();
unsigned SrcFile = MMI->RecordSource(CompileUnit->getDirectory(),
CompileUnit->getFileName());
// Record the source line but does create a label. It will be emitted
// at asm emission time.
MMI->RecordSourceLine(Subprogram->getLine(), 0, SrcFile);
}
return 0;
}
case Intrinsic::dbg_declare: {
MachineModuleInfo *MMI = DAG.getMachineModuleInfo();
DbgDeclareInst &DI = cast<DbgDeclareInst>(I);
Value *Variable = DI.getVariable();
if (MMI && Variable && MMI->Verify(Variable))
DAG.setRoot(DAG.getNode(ISD::DECLARE, MVT::Other, getRoot(),
getValue(DI.getAddress()), getValue(Variable)));
return 0;
}
case Intrinsic::eh_exception: {
if (ExceptionHandling) {
if (!CurMBB->isLandingPad()) {
// FIXME: Mark exception register as live in. Hack for PR1508.
unsigned Reg = TLI.getExceptionAddressRegister();
if (Reg) CurMBB->addLiveIn(Reg);
}
// Insert the EXCEPTIONADDR instruction.
SDVTList VTs = DAG.getVTList(TLI.getPointerTy(), MVT::Other);
SDOperand Ops[1];
Ops[0] = DAG.getRoot();
SDOperand Op = DAG.getNode(ISD::EXCEPTIONADDR, VTs, Ops, 1);
setValue(&I, Op);
DAG.setRoot(Op.getValue(1));
} else {
setValue(&I, DAG.getConstant(0, TLI.getPointerTy()));
}
return 0;
}
case Intrinsic::eh_selector_i32:
case Intrinsic::eh_selector_i64: {
MachineModuleInfo *MMI = DAG.getMachineModuleInfo();
MVT::ValueType VT = (Intrinsic == Intrinsic::eh_selector_i32 ?
MVT::i32 : MVT::i64);
if (ExceptionHandling && MMI) {
if (CurMBB->isLandingPad())
addCatchInfo(I, MMI, CurMBB);
else {
#ifndef NDEBUG
FuncInfo.CatchInfoLost.insert(&I);
#endif
// FIXME: Mark exception selector register as live in. Hack for PR1508.
unsigned Reg = TLI.getExceptionSelectorRegister();
if (Reg) CurMBB->addLiveIn(Reg);
}
// Insert the EHSELECTION instruction.
SDVTList VTs = DAG.getVTList(VT, MVT::Other);
SDOperand Ops[2];
Ops[0] = getValue(I.getOperand(1));
Ops[1] = getRoot();
SDOperand Op = DAG.getNode(ISD::EHSELECTION, VTs, Ops, 2);
setValue(&I, Op);
DAG.setRoot(Op.getValue(1));
} else {
setValue(&I, DAG.getConstant(0, VT));
}
return 0;
}
case Intrinsic::eh_typeid_for_i32:
case Intrinsic::eh_typeid_for_i64: {
MachineModuleInfo *MMI = DAG.getMachineModuleInfo();
MVT::ValueType VT = (Intrinsic == Intrinsic::eh_typeid_for_i32 ?
MVT::i32 : MVT::i64);
if (MMI) {
// Find the type id for the given typeinfo.
GlobalVariable *GV = ExtractTypeInfo(I.getOperand(1));
unsigned TypeID = MMI->getTypeIDFor(GV);
setValue(&I, DAG.getConstant(TypeID, VT));
} else {
// Return something different to eh_selector.
setValue(&I, DAG.getConstant(1, VT));
}
return 0;
}
case Intrinsic::eh_return: {
MachineModuleInfo *MMI = DAG.getMachineModuleInfo();
if (MMI && ExceptionHandling) {
MMI->setCallsEHReturn(true);
DAG.setRoot(DAG.getNode(ISD::EH_RETURN,
MVT::Other,
getRoot(),
getValue(I.getOperand(1)),
getValue(I.getOperand(2))));
} else {
setValue(&I, DAG.getConstant(0, TLI.getPointerTy()));
}
return 0;
}
case Intrinsic::eh_unwind_init: {
if (MachineModuleInfo *MMI = DAG.getMachineModuleInfo()) {
MMI->setCallsUnwindInit(true);
}
return 0;
}
case Intrinsic::eh_dwarf_cfa: {
if (ExceptionHandling) {
MVT::ValueType VT = getValue(I.getOperand(1)).getValueType();
SDOperand CfaArg;
if (MVT::getSizeInBits(VT) > MVT::getSizeInBits(TLI.getPointerTy()))
CfaArg = DAG.getNode(ISD::TRUNCATE,
TLI.getPointerTy(), getValue(I.getOperand(1)));
else
CfaArg = DAG.getNode(ISD::SIGN_EXTEND,
TLI.getPointerTy(), getValue(I.getOperand(1)));
SDOperand Offset = DAG.getNode(ISD::ADD,
TLI.getPointerTy(),
DAG.getNode(ISD::FRAME_TO_ARGS_OFFSET,
TLI.getPointerTy()),
CfaArg);
setValue(&I, DAG.getNode(ISD::ADD,
TLI.getPointerTy(),
DAG.getNode(ISD::FRAMEADDR,
TLI.getPointerTy(),
DAG.getConstant(0,
TLI.getPointerTy())),
Offset));
} else {
setValue(&I, DAG.getConstant(0, TLI.getPointerTy()));
}
return 0;
}
case Intrinsic::sqrt:
setValue(&I, DAG.getNode(ISD::FSQRT,
getValue(I.getOperand(1)).getValueType(),
getValue(I.getOperand(1))));
return 0;
case Intrinsic::powi:
setValue(&I, DAG.getNode(ISD::FPOWI,
getValue(I.getOperand(1)).getValueType(),
getValue(I.getOperand(1)),
getValue(I.getOperand(2))));
return 0;
case Intrinsic::sin:
setValue(&I, DAG.getNode(ISD::FSIN,
getValue(I.getOperand(1)).getValueType(),
getValue(I.getOperand(1))));
return 0;
case Intrinsic::cos:
setValue(&I, DAG.getNode(ISD::FCOS,
getValue(I.getOperand(1)).getValueType(),
getValue(I.getOperand(1))));
return 0;
case Intrinsic::pow:
setValue(&I, DAG.getNode(ISD::FPOW,
getValue(I.getOperand(1)).getValueType(),
getValue(I.getOperand(1)),
getValue(I.getOperand(2))));
return 0;
case Intrinsic::pcmarker: {
SDOperand Tmp = getValue(I.getOperand(1));
DAG.setRoot(DAG.getNode(ISD::PCMARKER, MVT::Other, getRoot(), Tmp));
return 0;
}
case Intrinsic::readcyclecounter: {
SDOperand Op = getRoot();
SDOperand Tmp = DAG.getNode(ISD::READCYCLECOUNTER,
DAG.getNodeValueTypes(MVT::i64, MVT::Other), 2,
&Op, 1);
setValue(&I, Tmp);
DAG.setRoot(Tmp.getValue(1));
return 0;
}
case Intrinsic::part_select: {
// Currently not implemented: just abort
assert(0 && "part_select intrinsic not implemented");
abort();
}
case Intrinsic::part_set: {
// Currently not implemented: just abort
assert(0 && "part_set intrinsic not implemented");
abort();
}
case Intrinsic::bswap:
setValue(&I, DAG.getNode(ISD::BSWAP,
getValue(I.getOperand(1)).getValueType(),
getValue(I.getOperand(1))));
return 0;
case Intrinsic::cttz: {
SDOperand Arg = getValue(I.getOperand(1));
MVT::ValueType Ty = Arg.getValueType();
SDOperand result = DAG.getNode(ISD::CTTZ, Ty, Arg);
setValue(&I, result);
return 0;
}
case Intrinsic::ctlz: {
SDOperand Arg = getValue(I.getOperand(1));
MVT::ValueType Ty = Arg.getValueType();
SDOperand result = DAG.getNode(ISD::CTLZ, Ty, Arg);
setValue(&I, result);
return 0;
}
case Intrinsic::ctpop: {
SDOperand Arg = getValue(I.getOperand(1));
MVT::ValueType Ty = Arg.getValueType();
SDOperand result = DAG.getNode(ISD::CTPOP, Ty, Arg);
setValue(&I, result);
return 0;
}
case Intrinsic::stacksave: {
SDOperand Op = getRoot();
SDOperand Tmp = DAG.getNode(ISD::STACKSAVE,
DAG.getNodeValueTypes(TLI.getPointerTy(), MVT::Other), 2, &Op, 1);
setValue(&I, Tmp);
DAG.setRoot(Tmp.getValue(1));
return 0;
}
case Intrinsic::stackrestore: {
SDOperand Tmp = getValue(I.getOperand(1));
DAG.setRoot(DAG.getNode(ISD::STACKRESTORE, MVT::Other, getRoot(), Tmp));
return 0;
}
case Intrinsic::prefetch:
// FIXME: Currently discarding prefetches.
return 0;
case Intrinsic::var_annotation:
// Discard annotate attributes
return 0;
case Intrinsic::init_trampoline: {
const Function *F =
cast<Function>(IntrinsicInst::StripPointerCasts(I.getOperand(2)));
SDOperand Ops[6];
Ops[0] = getRoot();
Ops[1] = getValue(I.getOperand(1));
Ops[2] = getValue(I.getOperand(2));
Ops[3] = getValue(I.getOperand(3));
Ops[4] = DAG.getSrcValue(I.getOperand(1));
Ops[5] = DAG.getSrcValue(F);
SDOperand Tmp = DAG.getNode(ISD::TRAMPOLINE,
DAG.getNodeValueTypes(TLI.getPointerTy(),
MVT::Other), 2,
Ops, 6);
setValue(&I, Tmp);
DAG.setRoot(Tmp.getValue(1));
return 0;
}
case Intrinsic::gcroot:
if (GCI) {
Value *Alloca = I.getOperand(1);
Constant *TypeMap = cast<Constant>(I.getOperand(2));
FrameIndexSDNode *FI = cast<FrameIndexSDNode>(getValue(Alloca).Val);
GCI->addStackRoot(FI->getIndex(), TypeMap);
}
return 0;
case Intrinsic::gcread:
case Intrinsic::gcwrite:
assert(0 && "Collector failed to lower gcread/gcwrite intrinsics!");
return 0;
case Intrinsic::flt_rounds: {
setValue(&I, DAG.getNode(ISD::FLT_ROUNDS_, MVT::i32));
return 0;
}
case Intrinsic::trap: {
DAG.setRoot(DAG.getNode(ISD::TRAP, MVT::Other, getRoot()));
return 0;
}
}
}
void SelectionDAGLowering::LowerCallTo(CallSite CS, SDOperand Callee,
bool IsTailCall,
MachineBasicBlock *LandingPad) {
const PointerType *PT = cast<PointerType>(CS.getCalledValue()->getType());
const FunctionType *FTy = cast<FunctionType>(PT->getElementType());
MachineModuleInfo *MMI = DAG.getMachineModuleInfo();
unsigned BeginLabel = 0, EndLabel = 0;
TargetLowering::ArgListTy Args;
TargetLowering::ArgListEntry Entry;
Args.reserve(CS.arg_size());
for (CallSite::arg_iterator i = CS.arg_begin(), e = CS.arg_end();
i != e; ++i) {
SDOperand ArgNode = getValue(*i);
Entry.Node = ArgNode; Entry.Ty = (*i)->getType();
unsigned attrInd = i - CS.arg_begin() + 1;
Entry.isSExt = CS.paramHasAttr(attrInd, ParamAttr::SExt);
Entry.isZExt = CS.paramHasAttr(attrInd, ParamAttr::ZExt);
Entry.isInReg = CS.paramHasAttr(attrInd, ParamAttr::InReg);
Entry.isSRet = CS.paramHasAttr(attrInd, ParamAttr::StructRet);
Entry.isNest = CS.paramHasAttr(attrInd, ParamAttr::Nest);
Entry.isByVal = CS.paramHasAttr(attrInd, ParamAttr::ByVal);
Args.push_back(Entry);
}
bool MarkTryRange = LandingPad ||
// C++ requires special handling of 'nounwind' calls.
(CS.doesNotThrow());
if (MarkTryRange && ExceptionHandling && MMI) {
// Insert a label before the invoke call to mark the try range. This can be
// used to detect deletion of the invoke via the MachineModuleInfo.
BeginLabel = MMI->NextLabelID();
DAG.setRoot(DAG.getNode(ISD::LABEL, MVT::Other, getRoot(),
DAG.getConstant(BeginLabel, MVT::i32),
DAG.getConstant(1, MVT::i32)));
}
std::pair<SDOperand,SDOperand> Result =
TLI.LowerCallTo(getRoot(), CS.getType(),
CS.paramHasAttr(0, ParamAttr::SExt),
FTy->isVarArg(), CS.getCallingConv(), IsTailCall,
Callee, Args, DAG);
if (CS.getType() != Type::VoidTy)
setValue(CS.getInstruction(), Result.first);
DAG.setRoot(Result.second);
if (MarkTryRange && ExceptionHandling && MMI) {
// Insert a label at the end of the invoke call to mark the try range. This
// can be used to detect deletion of the invoke via the MachineModuleInfo.
EndLabel = MMI->NextLabelID();
DAG.setRoot(DAG.getNode(ISD::LABEL, MVT::Other, getRoot(),
DAG.getConstant(EndLabel, MVT::i32),
DAG.getConstant(1, MVT::i32)));
// Inform MachineModuleInfo of range.
MMI->addInvoke(LandingPad, BeginLabel, EndLabel);
}
}
void SelectionDAGLowering::visitCall(CallInst &I) {
const char *RenameFn = 0;
if (Function *F = I.getCalledFunction()) {
if (F->isDeclaration()) {
if (unsigned IID = F->getIntrinsicID()) {
RenameFn = visitIntrinsicCall(I, IID);
if (!RenameFn)
return;
}
}
// Check for well-known libc/libm calls. If the function is internal, it
// can't be a library call.
unsigned NameLen = F->getNameLen();
if (!F->hasInternalLinkage() && NameLen) {
const char *NameStr = F->getNameStart();
if (NameStr[0] == 'c' &&
((NameLen == 8 && !strcmp(NameStr, "copysign")) ||
(NameLen == 9 && !strcmp(NameStr, "copysignf")))) {
if (I.getNumOperands() == 3 && // Basic sanity checks.
I.getOperand(1)->getType()->isFloatingPoint() &&
I.getType() == I.getOperand(1)->getType() &&
I.getType() == I.getOperand(2)->getType()) {
SDOperand LHS = getValue(I.getOperand(1));
SDOperand RHS = getValue(I.getOperand(2));
setValue(&I, DAG.getNode(ISD::FCOPYSIGN, LHS.getValueType(),
LHS, RHS));
return;
}
} else if (NameStr[0] == 'f' &&
((NameLen == 4 && !strcmp(NameStr, "fabs")) ||
(NameLen == 5 && !strcmp(NameStr, "fabsf")) ||
(NameLen == 5 && !strcmp(NameStr, "fabsl")))) {
if (I.getNumOperands() == 2 && // Basic sanity checks.
I.getOperand(1)->getType()->isFloatingPoint() &&
I.getType() == I.getOperand(1)->getType()) {
SDOperand Tmp = getValue(I.getOperand(1));
setValue(&I, DAG.getNode(ISD::FABS, Tmp.getValueType(), Tmp));
return;
}
} else if (NameStr[0] == 's' &&
((NameLen == 3 && !strcmp(NameStr, "sin")) ||
(NameLen == 4 && !strcmp(NameStr, "sinf")) ||
(NameLen == 4 && !strcmp(NameStr, "sinl")))) {
if (I.getNumOperands() == 2 && // Basic sanity checks.
I.getOperand(1)->getType()->isFloatingPoint() &&
I.getType() == I.getOperand(1)->getType()) {
SDOperand Tmp = getValue(I.getOperand(1));
setValue(&I, DAG.getNode(ISD::FSIN, Tmp.getValueType(), Tmp));
return;
}
} else if (NameStr[0] == 'c' &&
((NameLen == 3 && !strcmp(NameStr, "cos")) ||
(NameLen == 4 && !strcmp(NameStr, "cosf")) ||
(NameLen == 4 && !strcmp(NameStr, "cosl")))) {
if (I.getNumOperands() == 2 && // Basic sanity checks.
I.getOperand(1)->getType()->isFloatingPoint() &&
I.getType() == I.getOperand(1)->getType()) {
SDOperand Tmp = getValue(I.getOperand(1));
setValue(&I, DAG.getNode(ISD::FCOS, Tmp.getValueType(), Tmp));
return;
}
}
}
} else if (isa<InlineAsm>(I.getOperand(0))) {
visitInlineAsm(&I);
return;
}
SDOperand Callee;
if (!RenameFn)
Callee = getValue(I.getOperand(0));
else
Callee = DAG.getExternalSymbol(RenameFn, TLI.getPointerTy());
LowerCallTo(&I, Callee, I.isTailCall());
}
/// getCopyFromRegs - Emit a series of CopyFromReg nodes that copies from
/// this value and returns the result as a ValueVT value. This uses
/// Chain/Flag as the input and updates them for the output Chain/Flag.
/// If the Flag pointer is NULL, no flag is used.
SDOperand RegsForValue::getCopyFromRegs(SelectionDAG &DAG,
SDOperand &Chain, SDOperand *Flag)const{
// Copy the legal parts from the registers.
unsigned NumParts = Regs.size();
SmallVector<SDOperand, 8> Parts(NumParts);
for (unsigned i = 0; i != NumParts; ++i) {
SDOperand Part = Flag ?
DAG.getCopyFromReg(Chain, Regs[i], RegVT, *Flag) :
DAG.getCopyFromReg(Chain, Regs[i], RegVT);
Chain = Part.getValue(1);
if (Flag)
*Flag = Part.getValue(2);
Parts[i] = Part;
}
// Assemble the legal parts into the final value.
return getCopyFromParts(DAG, &Parts[0], NumParts, RegVT, ValueVT);
}
/// getCopyToRegs - Emit a series of CopyToReg nodes that copies the
/// specified value into the registers specified by this object. This uses
/// Chain/Flag as the input and updates them for the output Chain/Flag.
/// If the Flag pointer is NULL, no flag is used.
void RegsForValue::getCopyToRegs(SDOperand Val, SelectionDAG &DAG,
SDOperand &Chain, SDOperand *Flag) const {
// Get the list of the values's legal parts.
unsigned NumParts = Regs.size();
SmallVector<SDOperand, 8> Parts(NumParts);
getCopyToParts(DAG, Val, &Parts[0], NumParts, RegVT);
// Copy the parts into the registers.
for (unsigned i = 0; i != NumParts; ++i) {
SDOperand Part = Flag ?
DAG.getCopyToReg(Chain, Regs[i], Parts[i], *Flag) :
DAG.getCopyToReg(Chain, Regs[i], Parts[i]);
Chain = Part.getValue(0);
if (Flag)
*Flag = Part.getValue(1);
}
}
/// AddInlineAsmOperands - Add this value to the specified inlineasm node
/// operand list. This adds the code marker and includes the number of
/// values added into it.
void RegsForValue::AddInlineAsmOperands(unsigned Code, SelectionDAG &DAG,
std::vector<SDOperand> &Ops) const {
MVT::ValueType IntPtrTy = DAG.getTargetLoweringInfo().getPointerTy();
Ops.push_back(DAG.getTargetConstant(Code | (Regs.size() << 3), IntPtrTy));
for (unsigned i = 0, e = Regs.size(); i != e; ++i)
Ops.push_back(DAG.getRegister(Regs[i], RegVT));
}
/// isAllocatableRegister - If the specified register is safe to allocate,
/// i.e. it isn't a stack pointer or some other special register, return the
/// register class for the register. Otherwise, return null.
static const TargetRegisterClass *
isAllocatableRegister(unsigned Reg, MachineFunction &MF,
const TargetLowering &TLI,
const TargetRegisterInfo *TRI) {
MVT::ValueType FoundVT = MVT::Other;
const TargetRegisterClass *FoundRC = 0;
for (TargetRegisterInfo::regclass_iterator RCI = TRI->regclass_begin(),
E = TRI->regclass_end(); RCI != E; ++RCI) {
MVT::ValueType ThisVT = MVT::Other;
const TargetRegisterClass *RC = *RCI;
// If none of the the value types for this register class are valid, we
// can't use it. For example, 64-bit reg classes on 32-bit targets.
for (TargetRegisterClass::vt_iterator I = RC->vt_begin(), E = RC->vt_end();
I != E; ++I) {
if (TLI.isTypeLegal(*I)) {
// If we have already found this register in a different register class,
// choose the one with the largest VT specified. For example, on
// PowerPC, we favor f64 register classes over f32.
if (FoundVT == MVT::Other ||
MVT::getSizeInBits(FoundVT) < MVT::getSizeInBits(*I)) {
ThisVT = *I;
break;
}
}
}
if (ThisVT == MVT::Other) continue;
// NOTE: This isn't ideal. In particular, this might allocate the
// frame pointer in functions that need it (due to them not being taken
// out of allocation, because a variable sized allocation hasn't been seen
// yet). This is a slight code pessimization, but should still work.
for (TargetRegisterClass::iterator I = RC->allocation_order_begin(MF),
E = RC->allocation_order_end(MF); I != E; ++I)
if (*I == Reg) {
// We found a matching register class. Keep looking at others in case
// we find one with larger registers that this physreg is also in.
FoundRC = RC;
FoundVT = ThisVT;
break;
}
}
return FoundRC;
}
namespace {
/// AsmOperandInfo - This contains information for each constraint that we are
/// lowering.
struct AsmOperandInfo : public InlineAsm::ConstraintInfo {
/// ConstraintCode - This contains the actual string for the code, like "m".
std::string ConstraintCode;
/// ConstraintType - Information about the constraint code, e.g. Register,
/// RegisterClass, Memory, Other, Unknown.
TargetLowering::ConstraintType ConstraintType;
/// CallOperand/CallOperandval - If this is the result output operand or a
/// clobber, this is null, otherwise it is the incoming operand to the
/// CallInst. This gets modified as the asm is processed.
SDOperand CallOperand;
Value *CallOperandVal;
/// ConstraintVT - The ValueType for the operand value.
MVT::ValueType ConstraintVT;
/// AssignedRegs - If this is a register or register class operand, this
/// contains the set of register corresponding to the operand.
RegsForValue AssignedRegs;
AsmOperandInfo(const InlineAsm::ConstraintInfo &info)
: InlineAsm::ConstraintInfo(info),
ConstraintType(TargetLowering::C_Unknown),
CallOperand(0,0), CallOperandVal(0), ConstraintVT(MVT::Other) {
}
void ComputeConstraintToUse(const TargetLowering &TLI);
/// MarkAllocatedRegs - Once AssignedRegs is set, mark the assigned registers
/// busy in OutputRegs/InputRegs.
void MarkAllocatedRegs(bool isOutReg, bool isInReg,
std::set<unsigned> &OutputRegs,
std::set<unsigned> &InputRegs) const {
if (isOutReg)
OutputRegs.insert(AssignedRegs.Regs.begin(), AssignedRegs.Regs.end());
if (isInReg)
InputRegs.insert(AssignedRegs.Regs.begin(), AssignedRegs.Regs.end());
}
};
} // end anon namespace.
/// getConstraintGenerality - Return an integer indicating how general CT is.
static unsigned getConstraintGenerality(TargetLowering::ConstraintType CT) {
switch (CT) {
default: assert(0 && "Unknown constraint type!");
case TargetLowering::C_Other:
case TargetLowering::C_Unknown:
return 0;
case TargetLowering::C_Register:
return 1;
case TargetLowering::C_RegisterClass:
return 2;
case TargetLowering::C_Memory:
return 3;
}
}
void AsmOperandInfo::ComputeConstraintToUse(const TargetLowering &TLI) {
assert(!Codes.empty() && "Must have at least one constraint");
std::string *Current = &Codes[0];
TargetLowering::ConstraintType CurType = TLI.getConstraintType(*Current);
if (Codes.size() == 1) { // Single-letter constraints ('r') are very common.
ConstraintCode = *Current;
ConstraintType = CurType;
} else {
unsigned CurGenerality = getConstraintGenerality(CurType);
// If we have multiple constraints, try to pick the most general one ahead
// of time. This isn't a wonderful solution, but handles common cases.
for (unsigned j = 1, e = Codes.size(); j != e; ++j) {
TargetLowering::ConstraintType ThisType = TLI.getConstraintType(Codes[j]);
unsigned ThisGenerality = getConstraintGenerality(ThisType);
if (ThisGenerality > CurGenerality) {
// This constraint letter is more general than the previous one,
// use it.
CurType = ThisType;
Current = &Codes[j];
CurGenerality = ThisGenerality;
}
}
ConstraintCode = *Current;
ConstraintType = CurType;
}
if (ConstraintCode == "X") {
if (isa<BasicBlock>(CallOperandVal) || isa<ConstantInt>(CallOperandVal))
return;
// This matches anything. Labels and constants we handle elsewhere
// ('X' is the only thing that matches labels). Otherwise, try to
// resolve it to something we know about by looking at the actual
// operand type.
std::string s = "";
TLI.lowerXConstraint(ConstraintVT, s);
if (s!="") {
ConstraintCode = s;
ConstraintType = TLI.getConstraintType(ConstraintCode);
}
}
}
void SelectionDAGLowering::
GetRegistersForValue(AsmOperandInfo &OpInfo, bool HasEarlyClobber,
std::set<unsigned> &OutputRegs,
std::set<unsigned> &InputRegs) {
// Compute whether this value requires an input register, an output register,
// or both.
bool isOutReg = false;
bool isInReg = false;
switch (OpInfo.Type) {
case InlineAsm::isOutput:
isOutReg = true;
// If this is an early-clobber output, or if there is an input
// constraint that matches this, we need to reserve the input register
// so no other inputs allocate to it.
isInReg = OpInfo.isEarlyClobber || OpInfo.hasMatchingInput;
break;
case InlineAsm::isInput:
isInReg = true;
isOutReg = false;
break;
case InlineAsm::isClobber:
isOutReg = true;
isInReg = true;
break;
}
MachineFunction &MF = DAG.getMachineFunction();
std::vector<unsigned> Regs;
// If this is a constraint for a single physreg, or a constraint for a
// register class, find it.
std::pair<unsigned, const TargetRegisterClass*> PhysReg =
TLI.getRegForInlineAsmConstraint(OpInfo.ConstraintCode,
OpInfo.ConstraintVT);
unsigned NumRegs = 1;
if (OpInfo.ConstraintVT != MVT::Other)
NumRegs = TLI.getNumRegisters(OpInfo.ConstraintVT);
MVT::ValueType RegVT;
MVT::ValueType ValueVT = OpInfo.ConstraintVT;
// If this is a constraint for a specific physical register, like {r17},
// assign it now.
if (PhysReg.first) {
if (OpInfo.ConstraintVT == MVT::Other)
ValueVT = *PhysReg.second->vt_begin();
// Get the actual register value type. This is important, because the user
// may have asked for (e.g.) the AX register in i32 type. We need to
// remember that AX is actually i16 to get the right extension.
RegVT = *PhysReg.second->vt_begin();
// This is a explicit reference to a physical register.
Regs.push_back(PhysReg.first);
// If this is an expanded reference, add the rest of the regs to Regs.
if (NumRegs != 1) {
TargetRegisterClass::iterator I = PhysReg.second->begin();
TargetRegisterClass::iterator E = PhysReg.second->end();
for (; *I != PhysReg.first; ++I)
assert(I != E && "Didn't find reg!");
// Already added the first reg.
--NumRegs; ++I;
for (; NumRegs; --NumRegs, ++I) {
assert(I != E && "Ran out of registers to allocate!");
Regs.push_back(*I);
}
}
OpInfo.AssignedRegs = RegsForValue(Regs, RegVT, ValueVT);
OpInfo.MarkAllocatedRegs(isOutReg, isInReg, OutputRegs, InputRegs);
return;
}
// Otherwise, if this was a reference to an LLVM register class, create vregs
// for this reference.
std::vector<unsigned> RegClassRegs;
const TargetRegisterClass *RC = PhysReg.second;
if (RC) {
// If this is an early clobber or tied register, our regalloc doesn't know
// how to maintain the constraint. If it isn't, go ahead and create vreg
// and let the regalloc do the right thing.
if (!OpInfo.hasMatchingInput && !OpInfo.isEarlyClobber &&
// If there is some other early clobber and this is an input register,
// then we are forced to pre-allocate the input reg so it doesn't
// conflict with the earlyclobber.
!(OpInfo.Type == InlineAsm::isInput && HasEarlyClobber)) {
RegVT = *PhysReg.second->vt_begin();
if (OpInfo.ConstraintVT == MVT::Other)
ValueVT = RegVT;
// Create the appropriate number of virtual registers.
MachineRegisterInfo &RegInfo = MF.getRegInfo();
for (; NumRegs; --NumRegs)
Regs.push_back(RegInfo.createVirtualRegister(PhysReg.second));
OpInfo.AssignedRegs = RegsForValue(Regs, RegVT, ValueVT);
OpInfo.MarkAllocatedRegs(isOutReg, isInReg, OutputRegs, InputRegs);
return;
}
// Otherwise, we can't allocate it. Let the code below figure out how to
// maintain these constraints.
RegClassRegs.assign(PhysReg.second->begin(), PhysReg.second->end());
} else {
// This is a reference to a register class that doesn't directly correspond
// to an LLVM register class. Allocate NumRegs consecutive, available,
// registers from the class.
RegClassRegs = TLI.getRegClassForInlineAsmConstraint(OpInfo.ConstraintCode,
OpInfo.ConstraintVT);
}
const TargetRegisterInfo *TRI = DAG.getTarget().getRegisterInfo();
unsigned NumAllocated = 0;
for (unsigned i = 0, e = RegClassRegs.size(); i != e; ++i) {
unsigned Reg = RegClassRegs[i];
// See if this register is available.
if ((isOutReg && OutputRegs.count(Reg)) || // Already used.
(isInReg && InputRegs.count(Reg))) { // Already used.
// Make sure we find consecutive registers.
NumAllocated = 0;
continue;
}
// Check to see if this register is allocatable (i.e. don't give out the
// stack pointer).
if (RC == 0) {
RC = isAllocatableRegister(Reg, MF, TLI, TRI);
if (!RC) { // Couldn't allocate this register.
// Reset NumAllocated to make sure we return consecutive registers.
NumAllocated = 0;
continue;
}
}
// Okay, this register is good, we can use it.
++NumAllocated;
// If we allocated enough consecutive registers, succeed.
if (NumAllocated == NumRegs) {
unsigned RegStart = (i-NumAllocated)+1;
unsigned RegEnd = i+1;
// Mark all of the allocated registers used.
for (unsigned i = RegStart; i != RegEnd; ++i)
Regs.push_back(RegClassRegs[i]);
OpInfo.AssignedRegs = RegsForValue(Regs, *RC->vt_begin(),
OpInfo.ConstraintVT);
OpInfo.MarkAllocatedRegs(isOutReg, isInReg, OutputRegs, InputRegs);
return;
}
}
// Otherwise, we couldn't allocate enough registers for this.
return;
}
/// visitInlineAsm - Handle a call to an InlineAsm object.
///
void SelectionDAGLowering::visitInlineAsm(CallSite CS) {
InlineAsm *IA = cast<InlineAsm>(CS.getCalledValue());
/// ConstraintOperands - Information about all of the constraints.
std::vector<AsmOperandInfo> ConstraintOperands;
SDOperand Chain = getRoot();
SDOperand Flag;
std::set<unsigned> OutputRegs, InputRegs;
// Do a prepass over the constraints, canonicalizing them, and building up the
// ConstraintOperands list.
std::vector<InlineAsm::ConstraintInfo>
ConstraintInfos = IA->ParseConstraints();
// SawEarlyClobber - Keep track of whether we saw an earlyclobber output
// constraint. If so, we can't let the register allocator allocate any input
// registers, because it will not know to avoid the earlyclobbered output reg.
bool SawEarlyClobber = false;
unsigned ArgNo = 0; // ArgNo - The argument of the CallInst.
for (unsigned i = 0, e = ConstraintInfos.size(); i != e; ++i) {
ConstraintOperands.push_back(AsmOperandInfo(ConstraintInfos[i]));
AsmOperandInfo &OpInfo = ConstraintOperands.back();
MVT::ValueType OpVT = MVT::Other;
// Compute the value type for each operand.
switch (OpInfo.Type) {
case InlineAsm::isOutput:
if (!OpInfo.isIndirect) {
// The return value of the call is this value. As such, there is no
// corresponding argument.
assert(CS.getType() != Type::VoidTy && "Bad inline asm!");
OpVT = TLI.getValueType(CS.getType());
} else {
OpInfo.CallOperandVal = CS.getArgument(ArgNo++);
}
break;
case InlineAsm::isInput:
OpInfo.CallOperandVal = CS.getArgument(ArgNo++);
break;
case InlineAsm::isClobber:
// Nothing to do.
break;
}
// If this is an input or an indirect output, process the call argument.
// BasicBlocks are labels, currently appearing only in asm's.
if (OpInfo.CallOperandVal) {
if (isa<BasicBlock>(OpInfo.CallOperandVal))
OpInfo.CallOperand =
DAG.getBasicBlock(FuncInfo.MBBMap[cast<BasicBlock>(
OpInfo.CallOperandVal)]);
else {
OpInfo.CallOperand = getValue(OpInfo.CallOperandVal);
const Type *OpTy = OpInfo.CallOperandVal->getType();
// If this is an indirect operand, the operand is a pointer to the
// accessed type.
if (OpInfo.isIndirect)
OpTy = cast<PointerType>(OpTy)->getElementType();
// If OpTy is not a first-class value, it may be a struct/union that we
// can tile with integers.
if (!OpTy->isFirstClassType() && OpTy->isSized()) {
unsigned BitSize = TD->getTypeSizeInBits(OpTy);
switch (BitSize) {
default: break;
case 1:
case 8:
case 16:
case 32:
case 64:
OpTy = IntegerType::get(BitSize);
break;
}
}
OpVT = TLI.getValueType(OpTy, true);
}
}
OpInfo.ConstraintVT = OpVT;
// Compute the constraint code and ConstraintType to use.
OpInfo.ComputeConstraintToUse(TLI);
// Keep track of whether we see an earlyclobber.
SawEarlyClobber |= OpInfo.isEarlyClobber;
// If this is a memory input, and if the operand is not indirect, do what we
// need to to provide an address for the memory input.
if (OpInfo.ConstraintType == TargetLowering::C_Memory &&
!OpInfo.isIndirect) {
assert(OpInfo.Type == InlineAsm::isInput &&
"Can only indirectify direct input operands!");
// Memory operands really want the address of the value. If we don't have
// an indirect input, put it in the constpool if we can, otherwise spill
// it to a stack slot.
// If the operand is a float, integer, or vector constant, spill to a
// constant pool entry to get its address.
Value *OpVal = OpInfo.CallOperandVal;
if (isa<ConstantFP>(OpVal) || isa<ConstantInt>(OpVal) ||
isa<ConstantVector>(OpVal)) {
OpInfo.CallOperand = DAG.getConstantPool(cast<Constant>(OpVal),
TLI.getPointerTy());
} else {
// Otherwise, create a stack slot and emit a store to it before the
// asm.
const Type *Ty = OpVal->getType();
uint64_t TySize = TLI.getTargetData()->getABITypeSize(Ty);
unsigned Align = TLI.getTargetData()->getPrefTypeAlignment(Ty);
MachineFunction &MF = DAG.getMachineFunction();
int SSFI = MF.getFrameInfo()->CreateStackObject(TySize, Align);
SDOperand StackSlot = DAG.getFrameIndex(SSFI, TLI.getPointerTy());
Chain = DAG.getStore(Chain, OpInfo.CallOperand, StackSlot, NULL, 0);
OpInfo.CallOperand = StackSlot;
}
// There is no longer a Value* corresponding to this operand.
OpInfo.CallOperandVal = 0;
// It is now an indirect operand.
OpInfo.isIndirect = true;
}
// If this constraint is for a specific register, allocate it before
// anything else.
if (OpInfo.ConstraintType == TargetLowering::C_Register)
GetRegistersForValue(OpInfo, SawEarlyClobber, OutputRegs, InputRegs);
}
ConstraintInfos.clear();
// Second pass - Loop over all of the operands, assigning virtual or physregs
// to registerclass operands.
for (unsigned i = 0, e = ConstraintOperands.size(); i != e; ++i) {
AsmOperandInfo &OpInfo = ConstraintOperands[i];
// C_Register operands have already been allocated, Other/Memory don't need
// to be.
if (OpInfo.ConstraintType == TargetLowering::C_RegisterClass)
GetRegistersForValue(OpInfo, SawEarlyClobber, OutputRegs, InputRegs);
}
// AsmNodeOperands - The operands for the ISD::INLINEASM node.
std::vector<SDOperand> AsmNodeOperands;
AsmNodeOperands.push_back(SDOperand()); // reserve space for input chain
AsmNodeOperands.push_back(
DAG.getTargetExternalSymbol(IA->getAsmString().c_str(), MVT::Other));
// Loop over all of the inputs, copying the operand values into the
// appropriate registers and processing the output regs.
RegsForValue RetValRegs;
// IndirectStoresToEmit - The set of stores to emit after the inline asm node.
std::vector<std::pair<RegsForValue, Value*> > IndirectStoresToEmit;
for (unsigned i = 0, e = ConstraintOperands.size(); i != e; ++i) {
AsmOperandInfo &OpInfo = ConstraintOperands[i];
switch (OpInfo.Type) {
case InlineAsm::isOutput: {
if (OpInfo.ConstraintType != TargetLowering::C_RegisterClass &&
OpInfo.ConstraintType != TargetLowering::C_Register) {
// Memory output, or 'other' output (e.g. 'X' constraint).
assert(OpInfo.isIndirect && "Memory output must be indirect operand");
// Add information to the INLINEASM node to know about this output.
unsigned ResOpType = 4/*MEM*/ | (1 << 3);
AsmNodeOperands.push_back(DAG.getTargetConstant(ResOpType,
TLI.getPointerTy()));
AsmNodeOperands.push_back(OpInfo.CallOperand);
break;
}
// Otherwise, this is a register or register class output.
// Copy the output from the appropriate register. Find a register that
// we can use.
if (OpInfo.AssignedRegs.Regs.empty()) {
cerr << "Couldn't allocate output reg for contraint '"
<< OpInfo.ConstraintCode << "'!\n";
exit(1);
}
if (!OpInfo.isIndirect) {
// This is the result value of the call.
assert(RetValRegs.Regs.empty() &&
"Cannot have multiple output constraints yet!");
assert(CS.getType() != Type::VoidTy && "Bad inline asm!");
RetValRegs = OpInfo.AssignedRegs;
} else {
IndirectStoresToEmit.push_back(std::make_pair(OpInfo.AssignedRegs,
OpInfo.CallOperandVal));
}
// Add information to the INLINEASM node to know that this register is
// set.
OpInfo.AssignedRegs.AddInlineAsmOperands(2 /*REGDEF*/, DAG,
AsmNodeOperands);
break;
}
case InlineAsm::isInput: {
SDOperand InOperandVal = OpInfo.CallOperand;
if (isdigit(OpInfo.ConstraintCode[0])) { // Matching constraint?
// If this is required to match an output register we have already set,
// just use its register.
unsigned OperandNo = atoi(OpInfo.ConstraintCode.c_str());
// Scan until we find the definition we already emitted of this operand.
// When we find it, create a RegsForValue operand.
unsigned CurOp = 2; // The first operand.
for (; OperandNo; --OperandNo) {
// Advance to the next operand.
unsigned NumOps =
cast<ConstantSDNode>(AsmNodeOperands[CurOp])->getValue();
assert(((NumOps & 7) == 2 /*REGDEF*/ ||
(NumOps & 7) == 4 /*MEM*/) &&
"Skipped past definitions?");
CurOp += (NumOps>>3)+1;
}
unsigned NumOps =
cast<ConstantSDNode>(AsmNodeOperands[CurOp])->getValue();
if ((NumOps & 7) == 2 /*REGDEF*/) {
// Add NumOps>>3 registers to MatchedRegs.
RegsForValue MatchedRegs;
MatchedRegs.ValueVT = InOperandVal.getValueType();
MatchedRegs.RegVT = AsmNodeOperands[CurOp+1].getValueType();
for (unsigned i = 0, e = NumOps>>3; i != e; ++i) {
unsigned Reg =
cast<RegisterSDNode>(AsmNodeOperands[++CurOp])->getReg();
MatchedRegs.Regs.push_back(Reg);
}
// Use the produced MatchedRegs object to
MatchedRegs.getCopyToRegs(InOperandVal, DAG, Chain, &Flag);
MatchedRegs.AddInlineAsmOperands(1 /*REGUSE*/, DAG, AsmNodeOperands);
break;
} else {
assert((NumOps & 7) == 4/*MEM*/ && "Unknown matching constraint!");
assert(0 && "matching constraints for memory operands unimp");
}
}
if (OpInfo.ConstraintType == TargetLowering::C_Other) {
assert(!OpInfo.isIndirect &&
"Don't know how to handle indirect other inputs yet!");
std::vector<SDOperand> Ops;
TLI.LowerAsmOperandForConstraint(InOperandVal, OpInfo.ConstraintCode[0],
Ops, DAG);
if (Ops.empty()) {
cerr << "Invalid operand for inline asm constraint '"
<< OpInfo.ConstraintCode << "'!\n";
exit(1);
}
// Add information to the INLINEASM node to know about this input.
unsigned ResOpType = 3 /*IMM*/ | (Ops.size() << 3);
AsmNodeOperands.push_back(DAG.getTargetConstant(ResOpType,
TLI.getPointerTy()));
AsmNodeOperands.insert(AsmNodeOperands.end(), Ops.begin(), Ops.end());
break;
} else if (OpInfo.ConstraintType == TargetLowering::C_Memory) {
assert(OpInfo.isIndirect && "Operand must be indirect to be a mem!");
assert(InOperandVal.getValueType() == TLI.getPointerTy() &&
"Memory operands expect pointer values");
// Add information to the INLINEASM node to know about this input.
unsigned ResOpType = 4/*MEM*/ | (1 << 3);
AsmNodeOperands.push_back(DAG.getTargetConstant(ResOpType,
TLI.getPointerTy()));
AsmNodeOperands.push_back(InOperandVal);
break;
}
assert((OpInfo.ConstraintType == TargetLowering::C_RegisterClass ||
OpInfo.ConstraintType == TargetLowering::C_Register) &&
"Unknown constraint type!");
assert(!OpInfo.isIndirect &&
"Don't know how to handle indirect register inputs yet!");
// Copy the input into the appropriate registers.
assert(!OpInfo.AssignedRegs.Regs.empty() &&
"Couldn't allocate input reg!");
OpInfo.AssignedRegs.getCopyToRegs(InOperandVal, DAG, Chain, &Flag);
OpInfo.AssignedRegs.AddInlineAsmOperands(1/*REGUSE*/, DAG,
AsmNodeOperands);
break;
}
case InlineAsm::isClobber: {
// Add the clobbered value to the operand list, so that the register
// allocator is aware that the physreg got clobbered.
if (!OpInfo.AssignedRegs.Regs.empty())
OpInfo.AssignedRegs.AddInlineAsmOperands(2/*REGDEF*/, DAG,
AsmNodeOperands);
break;
}
}
}
// Finish up input operands.
AsmNodeOperands[0] = Chain;
if (Flag.Val) AsmNodeOperands.push_back(Flag);
Chain = DAG.getNode(ISD::INLINEASM,
DAG.getNodeValueTypes(MVT::Other, MVT::Flag), 2,
&AsmNodeOperands[0], AsmNodeOperands.size());
Flag = Chain.getValue(1);
// If this asm returns a register value, copy the result from that register
// and set it as the value of the call.
if (!RetValRegs.Regs.empty()) {
SDOperand Val = RetValRegs.getCopyFromRegs(DAG, Chain, &Flag);
// If the result of the inline asm is a vector, it may have the wrong
// width/num elts. Make sure to convert it to the right type with
// bit_convert.
if (MVT::isVector(Val.getValueType())) {
const VectorType *VTy = cast<VectorType>(CS.getType());
MVT::ValueType DesiredVT = TLI.getValueType(VTy);
Val = DAG.getNode(ISD::BIT_CONVERT, DesiredVT, Val);
}
setValue(CS.getInstruction(), Val);
}
std::vector<std::pair<SDOperand, Value*> > StoresToEmit;
// Process indirect outputs, first output all of the flagged copies out of
// physregs.
for (unsigned i = 0, e = IndirectStoresToEmit.size(); i != e; ++i) {
RegsForValue &OutRegs = IndirectStoresToEmit[i].first;
Value *Ptr = IndirectStoresToEmit[i].second;
SDOperand OutVal = OutRegs.getCopyFromRegs(DAG, Chain, &Flag);
StoresToEmit.push_back(std::make_pair(OutVal, Ptr));
}
// Emit the non-flagged stores from the physregs.
SmallVector<SDOperand, 8> OutChains;
for (unsigned i = 0, e = StoresToEmit.size(); i != e; ++i)
OutChains.push_back(DAG.getStore(Chain, StoresToEmit[i].first,
getValue(StoresToEmit[i].second),
StoresToEmit[i].second, 0));
if (!OutChains.empty())
Chain = DAG.getNode(ISD::TokenFactor, MVT::Other,
&OutChains[0], OutChains.size());
DAG.setRoot(Chain);
}
void SelectionDAGLowering::visitMalloc(MallocInst &I) {
SDOperand Src = getValue(I.getOperand(0));
MVT::ValueType IntPtr = TLI.getPointerTy();
if (IntPtr < Src.getValueType())
Src = DAG.getNode(ISD::TRUNCATE, IntPtr, Src);
else if (IntPtr > Src.getValueType())
Src = DAG.getNode(ISD::ZERO_EXTEND, IntPtr, Src);
// Scale the source by the type size.
uint64_t ElementSize = TD->getABITypeSize(I.getType()->getElementType());
Src = DAG.getNode(ISD::MUL, Src.getValueType(),
Src, DAG.getIntPtrConstant(ElementSize));
TargetLowering::ArgListTy Args;
TargetLowering::ArgListEntry Entry;
Entry.Node = Src;
Entry.Ty = TLI.getTargetData()->getIntPtrType();
Args.push_back(Entry);
std::pair<SDOperand,SDOperand> Result =
TLI.LowerCallTo(getRoot(), I.getType(), false, false, CallingConv::C, true,
DAG.getExternalSymbol("malloc", IntPtr),
Args, DAG);
setValue(&I, Result.first); // Pointers always fit in registers
DAG.setRoot(Result.second);
}
void SelectionDAGLowering::visitFree(FreeInst &I) {
TargetLowering::ArgListTy Args;
TargetLowering::ArgListEntry Entry;
Entry.Node = getValue(I.getOperand(0));
Entry.Ty = TLI.getTargetData()->getIntPtrType();
Args.push_back(Entry);
MVT::ValueType IntPtr = TLI.getPointerTy();
std::pair<SDOperand,SDOperand> Result =
TLI.LowerCallTo(getRoot(), Type::VoidTy, false, false, CallingConv::C, true,
DAG.getExternalSymbol("free", IntPtr), Args, DAG);
DAG.setRoot(Result.second);
}
// EmitInstrWithCustomInserter - This method should be implemented by targets
// that mark instructions with the 'usesCustomDAGSchedInserter' flag. These
// instructions are special in various ways, which require special support to
// insert. The specified MachineInstr is created but not inserted into any
// basic blocks, and the scheduler passes ownership of it to this method.
MachineBasicBlock *TargetLowering::EmitInstrWithCustomInserter(MachineInstr *MI,
MachineBasicBlock *MBB) {
cerr << "If a target marks an instruction with "
<< "'usesCustomDAGSchedInserter', it must implement "
<< "TargetLowering::EmitInstrWithCustomInserter!\n";
abort();
return 0;
}
void SelectionDAGLowering::visitVAStart(CallInst &I) {
DAG.setRoot(DAG.getNode(ISD::VASTART, MVT::Other, getRoot(),
getValue(I.getOperand(1)),
DAG.getSrcValue(I.getOperand(1))));
}
void SelectionDAGLowering::visitVAArg(VAArgInst &I) {
SDOperand V = DAG.getVAArg(TLI.getValueType(I.getType()), getRoot(),
getValue(I.getOperand(0)),
DAG.getSrcValue(I.getOperand(0)));
setValue(&I, V);
DAG.setRoot(V.getValue(1));
}
void SelectionDAGLowering::visitVAEnd(CallInst &I) {
DAG.setRoot(DAG.getNode(ISD::VAEND, MVT::Other, getRoot(),
getValue(I.getOperand(1)),
DAG.getSrcValue(I.getOperand(1))));
}
void SelectionDAGLowering::visitVACopy(CallInst &I) {
DAG.setRoot(DAG.getNode(ISD::VACOPY, MVT::Other, getRoot(),
getValue(I.getOperand(1)),
getValue(I.getOperand(2)),
DAG.getSrcValue(I.getOperand(1)),
DAG.getSrcValue(I.getOperand(2))));
}
/// TargetLowering::LowerArguments - This is the default LowerArguments
/// implementation, which just inserts a FORMAL_ARGUMENTS node. FIXME: When all
/// targets are migrated to using FORMAL_ARGUMENTS, this hook should be
/// integrated into SDISel.
std::vector<SDOperand>
TargetLowering::LowerArguments(Function &F, SelectionDAG &DAG) {
// Add CC# and isVararg as operands to the FORMAL_ARGUMENTS node.
std::vector<SDOperand> Ops;
Ops.push_back(DAG.getRoot());
Ops.push_back(DAG.getConstant(F.getCallingConv(), getPointerTy()));
Ops.push_back(DAG.getConstant(F.isVarArg(), getPointerTy()));
// Add one result value for each formal argument.
std::vector<MVT::ValueType> RetVals;
unsigned j = 1;
for (Function::arg_iterator I = F.arg_begin(), E = F.arg_end();
I != E; ++I, ++j) {
MVT::ValueType VT = getValueType(I->getType());
unsigned Flags = ISD::ParamFlags::NoFlagSet;
unsigned OriginalAlignment =
getTargetData()->getABITypeAlignment(I->getType());
// FIXME: Distinguish between a formal with no [sz]ext attribute from one
// that is zero extended!
if (F.paramHasAttr(j, ParamAttr::ZExt))
Flags &= ~(ISD::ParamFlags::SExt);
if (F.paramHasAttr(j, ParamAttr::SExt))
Flags |= ISD::ParamFlags::SExt;
if (F.paramHasAttr(j, ParamAttr::InReg))
Flags |= ISD::ParamFlags::InReg;
if (F.paramHasAttr(j, ParamAttr::StructRet))
Flags |= ISD::ParamFlags::StructReturn;
if (F.paramHasAttr(j, ParamAttr::ByVal)) {
Flags |= ISD::ParamFlags::ByVal;
const PointerType *Ty = cast<PointerType>(I->getType());
const Type *ElementTy = Ty->getElementType();
unsigned FrameAlign = Log2_32(getByValTypeAlignment(ElementTy));
unsigned FrameSize = getTargetData()->getABITypeSize(ElementTy);
Flags |= (FrameAlign << ISD::ParamFlags::ByValAlignOffs);
Flags |= (FrameSize << ISD::ParamFlags::ByValSizeOffs);
}
if (F.paramHasAttr(j, ParamAttr::Nest))
Flags |= ISD::ParamFlags::Nest;
Flags |= (OriginalAlignment << ISD::ParamFlags::OrigAlignmentOffs);
MVT::ValueType RegisterVT = getRegisterType(VT);
unsigned NumRegs = getNumRegisters(VT);
for (unsigned i = 0; i != NumRegs; ++i) {
RetVals.push_back(RegisterVT);
// if it isn't first piece, alignment must be 1
if (i > 0)
Flags = (Flags & (~ISD::ParamFlags::OrigAlignment)) |
(1 << ISD::ParamFlags::OrigAlignmentOffs);
Ops.push_back(DAG.getConstant(Flags, MVT::i32));
}
}
RetVals.push_back(MVT::Other);
// Create the node.
SDNode *Result = DAG.getNode(ISD::FORMAL_ARGUMENTS,
DAG.getVTList(&RetVals[0], RetVals.size()),
&Ops[0], Ops.size()).Val;
// Prelower FORMAL_ARGUMENTS. This isn't required for functionality, but
// allows exposing the loads that may be part of the argument access to the
// first DAGCombiner pass.
SDOperand TmpRes = LowerOperation(SDOperand(Result, 0), DAG);
// The number of results should match up, except that the lowered one may have
// an extra flag result.
assert((Result->getNumValues() == TmpRes.Val->getNumValues() ||
(Result->getNumValues()+1 == TmpRes.Val->getNumValues() &&
TmpRes.getValue(Result->getNumValues()).getValueType() == MVT::Flag))
&& "Lowering produced unexpected number of results!");
Result = TmpRes.Val;
unsigned NumArgRegs = Result->getNumValues() - 1;
DAG.setRoot(SDOperand(Result, NumArgRegs));
// Set up the return result vector.
Ops.clear();
unsigned i = 0;
unsigned Idx = 1;
for (Function::arg_iterator I = F.arg_begin(), E = F.arg_end(); I != E;
++I, ++Idx) {
MVT::ValueType VT = getValueType(I->getType());
MVT::ValueType PartVT = getRegisterType(VT);
unsigned NumParts = getNumRegisters(VT);
SmallVector<SDOperand, 4> Parts(NumParts);
for (unsigned j = 0; j != NumParts; ++j)
Parts[j] = SDOperand(Result, i++);
ISD::NodeType AssertOp = ISD::DELETED_NODE;
if (F.paramHasAttr(Idx, ParamAttr::SExt))
AssertOp = ISD::AssertSext;
else if (F.paramHasAttr(Idx, ParamAttr::ZExt))
AssertOp = ISD::AssertZext;
Ops.push_back(getCopyFromParts(DAG, &Parts[0], NumParts, PartVT, VT,
AssertOp, true));
}
assert(i == NumArgRegs && "Argument register count mismatch!");
return Ops;
}
/// TargetLowering::LowerCallTo - This is the default LowerCallTo
/// implementation, which just inserts an ISD::CALL node, which is later custom
/// lowered by the target to something concrete. FIXME: When all targets are
/// migrated to using ISD::CALL, this hook should be integrated into SDISel.
std::pair<SDOperand, SDOperand>
TargetLowering::LowerCallTo(SDOperand Chain, const Type *RetTy,
bool RetTyIsSigned, bool isVarArg,
unsigned CallingConv, bool isTailCall,
SDOperand Callee,
ArgListTy &Args, SelectionDAG &DAG) {
SmallVector<SDOperand, 32> Ops;
Ops.push_back(Chain); // Op#0 - Chain
Ops.push_back(DAG.getConstant(CallingConv, getPointerTy())); // Op#1 - CC
Ops.push_back(DAG.getConstant(isVarArg, getPointerTy())); // Op#2 - VarArg
Ops.push_back(DAG.getConstant(isTailCall, getPointerTy())); // Op#3 - Tail
Ops.push_back(Callee);
// Handle all of the outgoing arguments.
for (unsigned i = 0, e = Args.size(); i != e; ++i) {
MVT::ValueType VT = getValueType(Args[i].Ty);
SDOperand Op = Args[i].Node;
unsigned Flags = ISD::ParamFlags::NoFlagSet;
unsigned OriginalAlignment =
getTargetData()->getABITypeAlignment(Args[i].Ty);
if (Args[i].isSExt)
Flags |= ISD::ParamFlags::SExt;
if (Args[i].isZExt)
Flags |= ISD::ParamFlags::ZExt;
if (Args[i].isInReg)
Flags |= ISD::ParamFlags::InReg;
if (Args[i].isSRet)
Flags |= ISD::ParamFlags::StructReturn;
if (Args[i].isByVal) {
Flags |= ISD::ParamFlags::ByVal;
const PointerType *Ty = cast<PointerType>(Args[i].Ty);
const Type *ElementTy = Ty->getElementType();
unsigned FrameAlign = Log2_32(getByValTypeAlignment(ElementTy));
unsigned FrameSize = getTargetData()->getABITypeSize(ElementTy);
Flags |= (FrameAlign << ISD::ParamFlags::ByValAlignOffs);
Flags |= (FrameSize << ISD::ParamFlags::ByValSizeOffs);
}
if (Args[i].isNest)
Flags |= ISD::ParamFlags::Nest;
Flags |= OriginalAlignment << ISD::ParamFlags::OrigAlignmentOffs;
MVT::ValueType PartVT = getRegisterType(VT);
unsigned NumParts = getNumRegisters(VT);
SmallVector<SDOperand, 4> Parts(NumParts);
ISD::NodeType ExtendKind = ISD::ANY_EXTEND;
if (Args[i].isSExt)
ExtendKind = ISD::SIGN_EXTEND;
else if (Args[i].isZExt)
ExtendKind = ISD::ZERO_EXTEND;
getCopyToParts(DAG, Op, &Parts[0], NumParts, PartVT, ExtendKind);
for (unsigned i = 0; i != NumParts; ++i) {
// if it isn't first piece, alignment must be 1
unsigned MyFlags = Flags;
if (i != 0)
MyFlags = (MyFlags & (~ISD::ParamFlags::OrigAlignment)) |
(1 << ISD::ParamFlags::OrigAlignmentOffs);
Ops.push_back(Parts[i]);
Ops.push_back(DAG.getConstant(MyFlags, MVT::i32));
}
}
// Figure out the result value types.
MVT::ValueType VT = getValueType(RetTy);
MVT::ValueType RegisterVT = getRegisterType(VT);
unsigned NumRegs = getNumRegisters(VT);
SmallVector<MVT::ValueType, 4> RetTys(NumRegs);
for (unsigned i = 0; i != NumRegs; ++i)
RetTys[i] = RegisterVT;
RetTys.push_back(MVT::Other); // Always has a chain.
// Create the CALL node.
SDOperand Res = DAG.getNode(ISD::CALL,
DAG.getVTList(&RetTys[0], NumRegs + 1),
&Ops[0], Ops.size());
Chain = Res.getValue(NumRegs);
// Gather up the call result into a single value.
if (RetTy != Type::VoidTy) {
ISD::NodeType AssertOp = ISD::AssertSext;
if (!RetTyIsSigned)
AssertOp = ISD::AssertZext;
SmallVector<SDOperand, 4> Results(NumRegs);
for (unsigned i = 0; i != NumRegs; ++i)
Results[i] = Res.getValue(i);
Res = getCopyFromParts(DAG, &Results[0], NumRegs, RegisterVT, VT, AssertOp);
}
return std::make_pair(Res, Chain);
}
SDOperand TargetLowering::LowerOperation(SDOperand Op, SelectionDAG &DAG) {
assert(0 && "LowerOperation not implemented for this target!");
abort();
return SDOperand();
}
SDOperand TargetLowering::CustomPromoteOperation(SDOperand Op,
SelectionDAG &DAG) {
assert(0 && "CustomPromoteOperation not implemented for this target!");
abort();
return SDOperand();
}
/// getMemsetValue - Vectorized representation of the memset value
/// operand.
static SDOperand getMemsetValue(SDOperand Value, MVT::ValueType VT,
SelectionDAG &DAG) {
MVT::ValueType CurVT = VT;
if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Value)) {
uint64_t Val = C->getValue() & 255;
unsigned Shift = 8;
while (CurVT != MVT::i8) {
Val = (Val << Shift) | Val;
Shift <<= 1;
CurVT = (MVT::ValueType)((unsigned)CurVT - 1);
}
return DAG.getConstant(Val, VT);
} else {
Value = DAG.getNode(ISD::ZERO_EXTEND, VT, Value);
unsigned Shift = 8;
while (CurVT != MVT::i8) {
Value =
DAG.getNode(ISD::OR, VT,
DAG.getNode(ISD::SHL, VT, Value,
DAG.getConstant(Shift, MVT::i8)), Value);
Shift <<= 1;
CurVT = (MVT::ValueType)((unsigned)CurVT - 1);
}
return Value;
}
}
/// getMemsetStringVal - Similar to getMemsetValue. Except this is only
/// used when a memcpy is turned into a memset when the source is a constant
/// string ptr.
static SDOperand getMemsetStringVal(MVT::ValueType VT,
SelectionDAG &DAG, TargetLowering &TLI,
std::string &Str, unsigned Offset) {
uint64_t Val = 0;
unsigned MSB = MVT::getSizeInBits(VT) / 8;
if (TLI.isLittleEndian())
Offset = Offset + MSB - 1;
for (unsigned i = 0; i != MSB; ++i) {
Val = (Val << 8) | (unsigned char)Str[Offset];
Offset += TLI.isLittleEndian() ? -1 : 1;
}
return DAG.getConstant(Val, VT);
}
/// getMemBasePlusOffset - Returns base and offset node for the
static SDOperand getMemBasePlusOffset(SDOperand Base, unsigned Offset,
SelectionDAG &DAG, TargetLowering &TLI) {
MVT::ValueType VT = Base.getValueType();
return DAG.getNode(ISD::ADD, VT, Base, DAG.getConstant(Offset, VT));
}
/// MeetsMaxMemopRequirement - Determines if the number of memory ops required
/// to replace the memset / memcpy is below the threshold. It also returns the
/// types of the sequence of memory ops to perform memset / memcpy.
static bool MeetsMaxMemopRequirement(std::vector<MVT::ValueType> &MemOps,
unsigned Limit, uint64_t Size,
unsigned Align, TargetLowering &TLI) {
MVT::ValueType VT;
if (TLI.allowsUnalignedMemoryAccesses()) {
VT = MVT::i64;
} else {
switch (Align & 7) {
case 0:
VT = MVT::i64;
break;
case 4:
VT = MVT::i32;
break;
case 2:
VT = MVT::i16;
break;
default:
VT = MVT::i8;
break;
}
}
MVT::ValueType LVT = MVT::i64;
while (!TLI.isTypeLegal(LVT))
LVT = (MVT::ValueType)((unsigned)LVT - 1);
assert(MVT::isInteger(LVT));
if (VT > LVT)
VT = LVT;
unsigned NumMemOps = 0;
while (Size != 0) {
unsigned VTSize = MVT::getSizeInBits(VT) / 8;
while (VTSize > Size) {
VT = (MVT::ValueType)((unsigned)VT - 1);
VTSize >>= 1;
}
assert(MVT::isInteger(VT));
if (++NumMemOps > Limit)
return false;
MemOps.push_back(VT);
Size -= VTSize;
}
return true;
}
void SelectionDAGLowering::visitMemIntrinsic(CallInst &I, unsigned Op) {
SDOperand Op1 = getValue(I.getOperand(1));
SDOperand Op2 = getValue(I.getOperand(2));
SDOperand Op3 = getValue(I.getOperand(3));
SDOperand Op4 = getValue(I.getOperand(4));
unsigned Align = (unsigned)cast<ConstantSDNode>(Op4)->getValue();
if (Align == 0) Align = 1;
// If the source and destination are known to not be aliases, we can
// lower memmove as memcpy.
if (Op == ISD::MEMMOVE) {
uint64_t Size = -1ULL;
if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op3))
Size = C->getValue();
if (AA.alias(I.getOperand(1), Size, I.getOperand(2), Size) ==
AliasAnalysis::NoAlias)
Op = ISD::MEMCPY;
}
if (ConstantSDNode *Size = dyn_cast<ConstantSDNode>(Op3)) {
std::vector<MVT::ValueType> MemOps;
// Expand memset / memcpy to a series of load / store ops
// if the size operand falls below a certain threshold.
SmallVector<SDOperand, 8> OutChains;
switch (Op) {
default: break; // Do nothing for now.
case ISD::MEMSET: {
if (MeetsMaxMemopRequirement(MemOps, TLI.getMaxStoresPerMemset(),
Size->getValue(), Align, TLI)) {
unsigned NumMemOps = MemOps.size();
unsigned Offset = 0;
for (unsigned i = 0; i < NumMemOps; i++) {
MVT::ValueType VT = MemOps[i];
unsigned VTSize = MVT::getSizeInBits(VT) / 8;
SDOperand Value = getMemsetValue(Op2, VT, DAG);
SDOperand Store = DAG.getStore(getRoot(), Value,
getMemBasePlusOffset(Op1, Offset, DAG, TLI),
I.getOperand(1), Offset);
OutChains.push_back(Store);
Offset += VTSize;
}
}
break;
}
case ISD::MEMCPY: {
if (MeetsMaxMemopRequirement(MemOps, TLI.getMaxStoresPerMemcpy(),
Size->getValue(), Align, TLI)) {
unsigned NumMemOps = MemOps.size();
unsigned SrcOff = 0, DstOff = 0, SrcDelta = 0;
GlobalAddressSDNode *G = NULL;
std::string Str;
bool CopyFromStr = false;
if (Op2.getOpcode() == ISD::GlobalAddress)
G = cast<GlobalAddressSDNode>(Op2);
else if (Op2.getOpcode() == ISD::ADD &&
Op2.getOperand(0).getOpcode() == ISD::GlobalAddress &&
Op2.getOperand(1).getOpcode() == ISD::Constant) {
G = cast<GlobalAddressSDNode>(Op2.getOperand(0));
SrcDelta = cast<ConstantSDNode>(Op2.getOperand(1))->getValue();
}
if (G) {
GlobalVariable *GV = dyn_cast<GlobalVariable>(G->getGlobal());
if (GV && GV->isConstant()) {
Str = GV->getStringValue(false);
if (!Str.empty()) {
CopyFromStr = true;
SrcOff += SrcDelta;
}
}
}
for (unsigned i = 0; i < NumMemOps; i++) {
MVT::ValueType VT = MemOps[i];
unsigned VTSize = MVT::getSizeInBits(VT) / 8;
SDOperand Value, Chain, Store;
if (CopyFromStr) {
Value = getMemsetStringVal(VT, DAG, TLI, Str, SrcOff);
Chain = getRoot();
Store =
DAG.getStore(Chain, Value,
getMemBasePlusOffset(Op1, DstOff, DAG, TLI),
I.getOperand(1), DstOff);
} else {
Value = DAG.getLoad(VT, getRoot(),
getMemBasePlusOffset(Op2, SrcOff, DAG, TLI),
I.getOperand(2), SrcOff, false, Align);
Chain = Value.getValue(1);
Store =
DAG.getStore(Chain, Value,
getMemBasePlusOffset(Op1, DstOff, DAG, TLI),
I.getOperand(1), DstOff, false, Align);
}
OutChains.push_back(Store);
SrcOff += VTSize;
DstOff += VTSize;
}
}
break;
}
}
if (!OutChains.empty()) {
DAG.setRoot(DAG.getNode(ISD::TokenFactor, MVT::Other,
&OutChains[0], OutChains.size()));
return;
}
}
SDOperand AlwaysInline = DAG.getConstant(0, MVT::i1);
SDOperand Node;
switch(Op) {
default:
assert(0 && "Unknown Op");
case ISD::MEMCPY:
Node = DAG.getMemcpy(getRoot(), Op1, Op2, Op3, Op4, AlwaysInline);
break;
case ISD::MEMMOVE:
Node = DAG.getMemmove(getRoot(), Op1, Op2, Op3, Op4, AlwaysInline);
break;
case ISD::MEMSET:
Node = DAG.getMemset(getRoot(), Op1, Op2, Op3, Op4, AlwaysInline);
break;
}
DAG.setRoot(Node);
}
//===----------------------------------------------------------------------===//
// SelectionDAGISel code
//===----------------------------------------------------------------------===//
unsigned SelectionDAGISel::MakeReg(MVT::ValueType VT) {
return RegInfo->createVirtualRegister(TLI.getRegClassFor(VT));
}
void SelectionDAGISel::getAnalysisUsage(AnalysisUsage &AU) const {
AU.addRequired<AliasAnalysis>();
AU.addRequired<CollectorModuleMetadata>();
AU.setPreservesAll();
}
bool SelectionDAGISel::runOnFunction(Function &Fn) {
// Get alias analysis for load/store combining.
AA = &getAnalysis<AliasAnalysis>();
MachineFunction &MF = MachineFunction::construct(&Fn, TLI.getTargetMachine());
if (MF.getFunction()->hasCollector())
GCI = &getAnalysis<CollectorModuleMetadata>().get(*MF.getFunction());
else
GCI = 0;
RegInfo = &MF.getRegInfo();
DOUT << "\n\n\n=== " << Fn.getName() << "\n";
FunctionLoweringInfo FuncInfo(TLI, Fn, MF);
if (ExceptionHandling)
for (Function::iterator I = Fn.begin(), E = Fn.end(); I != E; ++I)
if (InvokeInst *Invoke = dyn_cast<InvokeInst>(I->getTerminator()))
// Mark landing pad.
FuncInfo.MBBMap[Invoke->getSuccessor(1)]->setIsLandingPad();
for (Function::iterator I = Fn.begin(), E = Fn.end(); I != E; ++I)
SelectBasicBlock(I, MF, FuncInfo);
// Add function live-ins to entry block live-in set.
BasicBlock *EntryBB = &Fn.getEntryBlock();
BB = FuncInfo.MBBMap[EntryBB];
if (!RegInfo->livein_empty())
for (MachineRegisterInfo::livein_iterator I = RegInfo->livein_begin(),
E = RegInfo->livein_end(); I != E; ++I)
BB->addLiveIn(I->first);
#ifndef NDEBUG
assert(FuncInfo.CatchInfoFound.size() == FuncInfo.CatchInfoLost.size() &&
"Not all catch info was assigned to a landing pad!");
#endif
return true;
}
SDOperand SelectionDAGLowering::CopyValueToVirtualRegister(Value *V,
unsigned Reg) {
SDOperand Op = getValue(V);
assert((Op.getOpcode() != ISD::CopyFromReg ||
cast<RegisterSDNode>(Op.getOperand(1))->getReg() != Reg) &&
"Copy from a reg to the same reg!");
MVT::ValueType SrcVT = Op.getValueType();
MVT::ValueType RegisterVT = TLI.getRegisterType(SrcVT);
unsigned NumRegs = TLI.getNumRegisters(SrcVT);
SmallVector<SDOperand, 8> Regs(NumRegs);
SmallVector<SDOperand, 8> Chains(NumRegs);
// Copy the value by legal parts into sequential virtual registers.
getCopyToParts(DAG, Op, &Regs[0], NumRegs, RegisterVT);
for (unsigned i = 0; i != NumRegs; ++i)
Chains[i] = DAG.getCopyToReg(getRoot(), Reg + i, Regs[i]);
return DAG.getNode(ISD::TokenFactor, MVT::Other, &Chains[0], NumRegs);
}
void SelectionDAGISel::
LowerArguments(BasicBlock *LLVMBB, SelectionDAGLowering &SDL,
std::vector<SDOperand> &UnorderedChains) {
// If this is the entry block, emit arguments.
Function &F = *LLVMBB->getParent();
FunctionLoweringInfo &FuncInfo = SDL.FuncInfo;
SDOperand OldRoot = SDL.DAG.getRoot();
std::vector<SDOperand> Args = TLI.LowerArguments(F, SDL.DAG);
unsigned a = 0;
for (Function::arg_iterator AI = F.arg_begin(), E = F.arg_end();
AI != E; ++AI, ++a)
if (!AI->use_empty()) {
SDL.setValue(AI, Args[a]);
// If this argument is live outside of the entry block, insert a copy from
// whereever we got it to the vreg that other BB's will reference it as.
DenseMap<const Value*, unsigned>::iterator VMI=FuncInfo.ValueMap.find(AI);
if (VMI != FuncInfo.ValueMap.end()) {
SDOperand Copy = SDL.CopyValueToVirtualRegister(AI, VMI->second);
UnorderedChains.push_back(Copy);
}
}
// Finally, if the target has anything special to do, allow it to do so.
// FIXME: this should insert code into the DAG!
EmitFunctionEntryCode(F, SDL.DAG.getMachineFunction());
}
static void copyCatchInfo(BasicBlock *SrcBB, BasicBlock *DestBB,
MachineModuleInfo *MMI, FunctionLoweringInfo &FLI) {
for (BasicBlock::iterator I = SrcBB->begin(), E = --SrcBB->end(); I != E; ++I)
if (isSelector(I)) {
// Apply the catch info to DestBB.
addCatchInfo(cast<CallInst>(*I), MMI, FLI.MBBMap[DestBB]);
#ifndef NDEBUG
if (!FLI.MBBMap[SrcBB]->isLandingPad())
FLI.CatchInfoFound.insert(I);
#endif
}
}
/// CheckDAGForTailCallsAndFixThem - This Function looks for CALL nodes in the
/// DAG and fixes their tailcall attribute operand.
static void CheckDAGForTailCallsAndFixThem(SelectionDAG &DAG,
TargetLowering& TLI) {
SDNode * Ret = NULL;
SDOperand Terminator = DAG.getRoot();
// Find RET node.
if (Terminator.getOpcode() == ISD::RET) {
Ret = Terminator.Val;
}
// Fix tail call attribute of CALL nodes.
for (SelectionDAG::allnodes_iterator BE = DAG.allnodes_begin(),
BI = prior(DAG.allnodes_end()); BI != BE; --BI) {
if (BI->getOpcode() == ISD::CALL) {
SDOperand OpRet(Ret, 0);
SDOperand OpCall(static_cast<SDNode*>(BI), 0);
bool isMarkedTailCall =
cast<ConstantSDNode>(OpCall.getOperand(3))->getValue() != 0;
// If CALL node has tail call attribute set to true and the call is not
// eligible (no RET or the target rejects) the attribute is fixed to
// false. The TargetLowering::IsEligibleForTailCallOptimization function
// must correctly identify tail call optimizable calls.
if (isMarkedTailCall &&
(Ret==NULL ||
!TLI.IsEligibleForTailCallOptimization(OpCall, OpRet, DAG))) {
SmallVector<SDOperand, 32> Ops;
unsigned idx=0;
for(SDNode::op_iterator I =OpCall.Val->op_begin(),
E=OpCall.Val->op_end(); I!=E; I++, idx++) {
if (idx!=3)
Ops.push_back(*I);
else
Ops.push_back(DAG.getConstant(false, TLI.getPointerTy()));
}
DAG.UpdateNodeOperands(OpCall, Ops.begin(), Ops.size());
}
}
}
}
void SelectionDAGISel::BuildSelectionDAG(SelectionDAG &DAG, BasicBlock *LLVMBB,
std::vector<std::pair<MachineInstr*, unsigned> > &PHINodesToUpdate,
FunctionLoweringInfo &FuncInfo) {
SelectionDAGLowering SDL(DAG, TLI, *AA, FuncInfo, GCI);
std::vector<SDOperand> UnorderedChains;
// Lower any arguments needed in this block if this is the entry block.
if (LLVMBB == &LLVMBB->getParent()->getEntryBlock())
LowerArguments(LLVMBB, SDL, UnorderedChains);
BB = FuncInfo.MBBMap[LLVMBB];
SDL.setCurrentBasicBlock(BB);
MachineModuleInfo *MMI = DAG.getMachineModuleInfo();
if (ExceptionHandling && MMI && BB->isLandingPad()) {
// Add a label to mark the beginning of the landing pad. Deletion of the
// landing pad can thus be detected via the MachineModuleInfo.
unsigned LabelID = MMI->addLandingPad(BB);
DAG.setRoot(DAG.getNode(ISD::LABEL, MVT::Other, DAG.getEntryNode(),
DAG.getConstant(LabelID, MVT::i32),
DAG.getConstant(1, MVT::i32)));
// Mark exception register as live in.
unsigned Reg = TLI.getExceptionAddressRegister();
if (Reg) BB->addLiveIn(Reg);
// Mark exception selector register as live in.
Reg = TLI.getExceptionSelectorRegister();
if (Reg) BB->addLiveIn(Reg);
// FIXME: Hack around an exception handling flaw (PR1508): the personality
// function and list of typeids logically belong to the invoke (or, if you
// like, the basic block containing the invoke), and need to be associated
// with it in the dwarf exception handling tables. Currently however the
// information is provided by an intrinsic (eh.selector) that can be moved
// to unexpected places by the optimizers: if the unwind edge is critical,
// then breaking it can result in the intrinsics being in the successor of
// the landing pad, not the landing pad itself. This results in exceptions
// not being caught because no typeids are associated with the invoke.
// This may not be the only way things can go wrong, but it is the only way
// we try to work around for the moment.
BranchInst *Br = dyn_cast<BranchInst>(LLVMBB->getTerminator());
if (Br && Br->isUnconditional()) { // Critical edge?
BasicBlock::iterator I, E;
for (I = LLVMBB->begin(), E = --LLVMBB->end(); I != E; ++I)
if (isSelector(I))
break;
if (I == E)
// No catch info found - try to extract some from the successor.
copyCatchInfo(Br->getSuccessor(0), LLVMBB, MMI, FuncInfo);
}
}
// Lower all of the non-terminator instructions.
for (BasicBlock::iterator I = LLVMBB->begin(), E = --LLVMBB->end();
I != E; ++I)
SDL.visit(*I);
// Ensure that all instructions which are used outside of their defining
// blocks are available as virtual registers. Invoke is handled elsewhere.
for (BasicBlock::iterator I = LLVMBB->begin(), E = LLVMBB->end(); I != E;++I)
if (!I->use_empty() && !isa<PHINode>(I) && !isa<InvokeInst>(I)) {
DenseMap<const Value*, unsigned>::iterator VMI =FuncInfo.ValueMap.find(I);
if (VMI != FuncInfo.ValueMap.end())
UnorderedChains.push_back(
SDL.CopyValueToVirtualRegister(I, VMI->second));
}
// Handle PHI nodes in successor blocks. Emit code into the SelectionDAG to
// ensure constants are generated when needed. Remember the virtual registers
// that need to be added to the Machine PHI nodes as input. We cannot just
// directly add them, because expansion might result in multiple MBB's for one
// BB. As such, the start of the BB might correspond to a different MBB than
// the end.
//
TerminatorInst *TI = LLVMBB->getTerminator();
// Emit constants only once even if used by multiple PHI nodes.
std::map<Constant*, unsigned> ConstantsOut;
// Vector bool would be better, but vector<bool> is really slow.
std::vector<unsigned char> SuccsHandled;
if (TI->getNumSuccessors())
SuccsHandled.resize(BB->getParent()->getNumBlockIDs());
// Check successor nodes' PHI nodes that expect a constant to be available
// from this block.
for (unsigned succ = 0, e = TI->getNumSuccessors(); succ != e; ++succ) {
BasicBlock *SuccBB = TI->getSuccessor(succ);
if (!isa<PHINode>(SuccBB->begin())) continue;
MachineBasicBlock *SuccMBB = FuncInfo.MBBMap[SuccBB];
// If this terminator has multiple identical successors (common for
// switches), only handle each succ once.
unsigned SuccMBBNo = SuccMBB->getNumber();
if (SuccsHandled[SuccMBBNo]) continue;
SuccsHandled[SuccMBBNo] = true;
MachineBasicBlock::iterator MBBI = SuccMBB->begin();
PHINode *PN;
// At this point we know that there is a 1-1 correspondence between LLVM PHI
// nodes and Machine PHI nodes, but the incoming operands have not been
// emitted yet.
for (BasicBlock::iterator I = SuccBB->begin();
(PN = dyn_cast<PHINode>(I)); ++I) {
// Ignore dead phi's.
if (PN->use_empty()) continue;
unsigned Reg;
Value *PHIOp = PN->getIncomingValueForBlock(LLVMBB);
if (Constant *C = dyn_cast<Constant>(PHIOp)) {
unsigned &RegOut = ConstantsOut[C];
if (RegOut == 0) {
RegOut = FuncInfo.CreateRegForValue(C);
UnorderedChains.push_back(
SDL.CopyValueToVirtualRegister(C, RegOut));
}
Reg = RegOut;
} else {
Reg = FuncInfo.ValueMap[PHIOp];
if (Reg == 0) {
assert(isa<AllocaInst>(PHIOp) &&
FuncInfo.StaticAllocaMap.count(cast<AllocaInst>(PHIOp)) &&
"Didn't codegen value into a register!??");
Reg = FuncInfo.CreateRegForValue(PHIOp);
UnorderedChains.push_back(
SDL.CopyValueToVirtualRegister(PHIOp, Reg));
}
}
// Remember that this register needs to added to the machine PHI node as
// the input for this MBB.
MVT::ValueType VT = TLI.getValueType(PN->getType());
unsigned NumRegisters = TLI.getNumRegisters(VT);
for (unsigned i = 0, e = NumRegisters; i != e; ++i)
PHINodesToUpdate.push_back(std::make_pair(MBBI++, Reg+i));
}
}
ConstantsOut.clear();
// Turn all of the unordered chains into one factored node.
if (!UnorderedChains.empty()) {
SDOperand Root = SDL.getRoot();
if (Root.getOpcode() != ISD::EntryToken) {
unsigned i = 0, e = UnorderedChains.size();
for (; i != e; ++i) {
assert(UnorderedChains[i].Val->getNumOperands() > 1);
if (UnorderedChains[i].Val->getOperand(0) == Root)
break; // Don't add the root if we already indirectly depend on it.
}
if (i == e)
UnorderedChains.push_back(Root);
}
DAG.setRoot(DAG.getNode(ISD::TokenFactor, MVT::Other,
&UnorderedChains[0], UnorderedChains.size()));
}
// Lower the terminator after the copies are emitted.
SDL.visit(*LLVMBB->getTerminator());
// Copy over any CaseBlock records that may now exist due to SwitchInst
// lowering, as well as any jump table information.
SwitchCases.clear();
SwitchCases = SDL.SwitchCases;
JTCases.clear();
JTCases = SDL.JTCases;
BitTestCases.clear();
BitTestCases = SDL.BitTestCases;
// Make sure the root of the DAG is up-to-date.
DAG.setRoot(SDL.getRoot());
// Check whether calls in this block are real tail calls. Fix up CALL nodes
// with correct tailcall attribute so that the target can rely on the tailcall
// attribute indicating whether the call is really eligible for tail call
// optimization.
CheckDAGForTailCallsAndFixThem(DAG, TLI);
}
void SelectionDAGISel::CodeGenAndEmitDAG(SelectionDAG &DAG) {
DOUT << "Lowered selection DAG:\n";
DEBUG(DAG.dump());
// Run the DAG combiner in pre-legalize mode.
DAG.Combine(false, *AA);
DOUT << "Optimized lowered selection DAG:\n";
DEBUG(DAG.dump());
// Second step, hack on the DAG until it only uses operations and types that
// the target supports.
#if 0 // Enable this some day.
DAG.LegalizeTypes();
// Someday even later, enable a dag combine pass here.
#endif
DAG.Legalize();
DOUT << "Legalized selection DAG:\n";
DEBUG(DAG.dump());
// Run the DAG combiner in post-legalize mode.
DAG.Combine(true, *AA);
DOUT << "Optimized legalized selection DAG:\n";
DEBUG(DAG.dump());
if (ViewISelDAGs) DAG.viewGraph();
// Third, instruction select all of the operations to machine code, adding the
// code to the MachineBasicBlock.
InstructionSelectBasicBlock(DAG);
DOUT << "Selected machine code:\n";
DEBUG(BB->dump());
}
void SelectionDAGISel::SelectBasicBlock(BasicBlock *LLVMBB, MachineFunction &MF,
FunctionLoweringInfo &FuncInfo) {
std::vector<std::pair<MachineInstr*, unsigned> > PHINodesToUpdate;
{
SelectionDAG DAG(TLI, MF, getAnalysisToUpdate<MachineModuleInfo>());
CurDAG = &DAG;
// First step, lower LLVM code to some DAG. This DAG may use operations and
// types that are not supported by the target.
BuildSelectionDAG(DAG, LLVMBB, PHINodesToUpdate, FuncInfo);
// Second step, emit the lowered DAG as machine code.
CodeGenAndEmitDAG(DAG);
}
DOUT << "Total amount of phi nodes to update: "
<< PHINodesToUpdate.size() << "\n";
DEBUG(for (unsigned i = 0, e = PHINodesToUpdate.size(); i != e; ++i)
DOUT << "Node " << i << " : (" << PHINodesToUpdate[i].first
<< ", " << PHINodesToUpdate[i].second << ")\n";);
// Next, now that we know what the last MBB the LLVM BB expanded is, update
// PHI nodes in successors.
if (SwitchCases.empty() && JTCases.empty() && BitTestCases.empty()) {
for (unsigned i = 0, e = PHINodesToUpdate.size(); i != e; ++i) {
MachineInstr *PHI = PHINodesToUpdate[i].first;
assert(PHI->getOpcode() == TargetInstrInfo::PHI &&
"This is not a machine PHI node that we are updating!");
PHI->addOperand(MachineOperand::CreateReg(PHINodesToUpdate[i].second,
false));
PHI->addOperand(MachineOperand::CreateMBB(BB));
}
return;
}
for (unsigned i = 0, e = BitTestCases.size(); i != e; ++i) {
// Lower header first, if it wasn't already lowered
if (!BitTestCases[i].Emitted) {
SelectionDAG HSDAG(TLI, MF, getAnalysisToUpdate<MachineModuleInfo>());
CurDAG = &HSDAG;
SelectionDAGLowering HSDL(HSDAG, TLI, *AA, FuncInfo, GCI);
// Set the current basic block to the mbb we wish to insert the code into
BB = BitTestCases[i].Parent;
HSDL.setCurrentBasicBlock(BB);
// Emit the code
HSDL.visitBitTestHeader(BitTestCases[i]);
HSDAG.setRoot(HSDL.getRoot());
CodeGenAndEmitDAG(HSDAG);
}
for (unsigned j = 0, ej = BitTestCases[i].Cases.size(); j != ej; ++j) {
SelectionDAG BSDAG(TLI, MF, getAnalysisToUpdate<MachineModuleInfo>());
CurDAG = &BSDAG;
SelectionDAGLowering BSDL(BSDAG, TLI, *AA, FuncInfo, GCI);
// Set the current basic block to the mbb we wish to insert the code into
BB = BitTestCases[i].Cases[j].ThisBB;
BSDL.setCurrentBasicBlock(BB);
// Emit the code
if (j+1 != ej)
BSDL.visitBitTestCase(BitTestCases[i].Cases[j+1].ThisBB,
BitTestCases[i].Reg,
BitTestCases[i].Cases[j]);
else
BSDL.visitBitTestCase(BitTestCases[i].Default,
BitTestCases[i].Reg,
BitTestCases[i].Cases[j]);
BSDAG.setRoot(BSDL.getRoot());
CodeGenAndEmitDAG(BSDAG);
}
// Update PHI Nodes
for (unsigned pi = 0, pe = PHINodesToUpdate.size(); pi != pe; ++pi) {
MachineInstr *PHI = PHINodesToUpdate[pi].first;
MachineBasicBlock *PHIBB = PHI->getParent();
assert(PHI->getOpcode() == TargetInstrInfo::PHI &&
"This is not a machine PHI node that we are updating!");
// This is "default" BB. We have two jumps to it. From "header" BB and
// from last "case" BB.
if (PHIBB == BitTestCases[i].Default) {
PHI->addOperand(MachineOperand::CreateReg(PHINodesToUpdate[pi].second,
false));
PHI->addOperand(MachineOperand::CreateMBB(BitTestCases[i].Parent));
PHI->addOperand(MachineOperand::CreateReg(PHINodesToUpdate[pi].second,
false));
PHI->addOperand(MachineOperand::CreateMBB(BitTestCases[i].Cases.
back().ThisBB));
}
// One of "cases" BB.
for (unsigned j = 0, ej = BitTestCases[i].Cases.size(); j != ej; ++j) {
MachineBasicBlock* cBB = BitTestCases[i].Cases[j].ThisBB;
if (cBB->succ_end() !=
std::find(cBB->succ_begin(),cBB->succ_end(), PHIBB)) {
PHI->addOperand(MachineOperand::CreateReg(PHINodesToUpdate[pi].second,
false));
PHI->addOperand(MachineOperand::CreateMBB(cBB));
}
}
}
}
// If the JumpTable record is filled in, then we need to emit a jump table.
// Updating the PHI nodes is tricky in this case, since we need to determine
// whether the PHI is a successor of the range check MBB or the jump table MBB
for (unsigned i = 0, e = JTCases.size(); i != e; ++i) {
// Lower header first, if it wasn't already lowered
if (!JTCases[i].first.Emitted) {
SelectionDAG HSDAG(TLI, MF, getAnalysisToUpdate<MachineModuleInfo>());
CurDAG = &HSDAG;
SelectionDAGLowering HSDL(HSDAG, TLI, *AA, FuncInfo, GCI);
// Set the current basic block to the mbb we wish to insert the code into
BB = JTCases[i].first.HeaderBB;
HSDL.setCurrentBasicBlock(BB);
// Emit the code
HSDL.visitJumpTableHeader(JTCases[i].second, JTCases[i].first);
HSDAG.setRoot(HSDL.getRoot());
CodeGenAndEmitDAG(HSDAG);
}
SelectionDAG JSDAG(TLI, MF, getAnalysisToUpdate<MachineModuleInfo>());
CurDAG = &JSDAG;
SelectionDAGLowering JSDL(JSDAG, TLI, *AA, FuncInfo, GCI);
// Set the current basic block to the mbb we wish to insert the code into
BB = JTCases[i].second.MBB;
JSDL.setCurrentBasicBlock(BB);
// Emit the code
JSDL.visitJumpTable(JTCases[i].second);
JSDAG.setRoot(JSDL.getRoot());
CodeGenAndEmitDAG(JSDAG);
// Update PHI Nodes
for (unsigned pi = 0, pe = PHINodesToUpdate.size(); pi != pe; ++pi) {
MachineInstr *PHI = PHINodesToUpdate[pi].first;
MachineBasicBlock *PHIBB = PHI->getParent();
assert(PHI->getOpcode() == TargetInstrInfo::PHI &&
"This is not a machine PHI node that we are updating!");
// "default" BB. We can go there only from header BB.
if (PHIBB == JTCases[i].second.Default) {
PHI->addOperand(MachineOperand::CreateReg(PHINodesToUpdate[pi].second,
false));
PHI->addOperand(MachineOperand::CreateMBB(JTCases[i].first.HeaderBB));
}
// JT BB. Just iterate over successors here
if (BB->succ_end() != std::find(BB->succ_begin(),BB->succ_end(), PHIBB)) {
PHI->addOperand(MachineOperand::CreateReg(PHINodesToUpdate[pi].second,
false));
PHI->addOperand(MachineOperand::CreateMBB(BB));
}
}
}
// If the switch block involved a branch to one of the actual successors, we
// need to update PHI nodes in that block.
for (unsigned i = 0, e = PHINodesToUpdate.size(); i != e; ++i) {
MachineInstr *PHI = PHINodesToUpdate[i].first;
assert(PHI->getOpcode() == TargetInstrInfo::PHI &&
"This is not a machine PHI node that we are updating!");
if (BB->isSuccessor(PHI->getParent())) {
PHI->addOperand(MachineOperand::CreateReg(PHINodesToUpdate[i].second,
false));
PHI->addOperand(MachineOperand::CreateMBB(BB));
}
}
// If we generated any switch lowering information, build and codegen any
// additional DAGs necessary.
for (unsigned i = 0, e = SwitchCases.size(); i != e; ++i) {
SelectionDAG SDAG(TLI, MF, getAnalysisToUpdate<MachineModuleInfo>());
CurDAG = &SDAG;
SelectionDAGLowering SDL(SDAG, TLI, *AA, FuncInfo, GCI);
// Set the current basic block to the mbb we wish to insert the code into
BB = SwitchCases[i].ThisBB;
SDL.setCurrentBasicBlock(BB);
// Emit the code
SDL.visitSwitchCase(SwitchCases[i]);
SDAG.setRoot(SDL.getRoot());
CodeGenAndEmitDAG(SDAG);
// Handle any PHI nodes in successors of this chunk, as if we were coming
// from the original BB before switch expansion. Note that PHI nodes can
// occur multiple times in PHINodesToUpdate. We have to be very careful to
// handle them the right number of times.
while ((BB = SwitchCases[i].TrueBB)) { // Handle LHS and RHS.
for (MachineBasicBlock::iterator Phi = BB->begin();
Phi != BB->end() && Phi->getOpcode() == TargetInstrInfo::PHI; ++Phi){
// This value for this PHI node is recorded in PHINodesToUpdate, get it.
for (unsigned pn = 0; ; ++pn) {
assert(pn != PHINodesToUpdate.size() && "Didn't find PHI entry!");
if (PHINodesToUpdate[pn].first == Phi) {
Phi->addOperand(MachineOperand::CreateReg(PHINodesToUpdate[pn].
second, false));
Phi->addOperand(MachineOperand::CreateMBB(SwitchCases[i].ThisBB));
break;
}
}
}
// Don't process RHS if same block as LHS.
if (BB == SwitchCases[i].FalseBB)
SwitchCases[i].FalseBB = 0;
// If we haven't handled the RHS, do so now. Otherwise, we're done.
SwitchCases[i].TrueBB = SwitchCases[i].FalseBB;
SwitchCases[i].FalseBB = 0;
}
assert(SwitchCases[i].TrueBB == 0 && SwitchCases[i].FalseBB == 0);
}
}
//===----------------------------------------------------------------------===//
/// ScheduleAndEmitDAG - Pick a safe ordering and emit instructions for each
/// target node in the graph.
void SelectionDAGISel::ScheduleAndEmitDAG(SelectionDAG &DAG) {
if (ViewSchedDAGs) DAG.viewGraph();
RegisterScheduler::FunctionPassCtor Ctor = RegisterScheduler::getDefault();
if (!Ctor) {
Ctor = ISHeuristic;
RegisterScheduler::setDefault(Ctor);
}
ScheduleDAG *SL = Ctor(this, &DAG, BB);
BB = SL->Run();
if (ViewSUnitDAGs) SL->viewGraph();
delete SL;
}
HazardRecognizer *SelectionDAGISel::CreateTargetHazardRecognizer() {
return new HazardRecognizer();
}
//===----------------------------------------------------------------------===//
// Helper functions used by the generated instruction selector.
//===----------------------------------------------------------------------===//
// Calls to these methods are generated by tblgen.
/// CheckAndMask - The isel is trying to match something like (and X, 255). If
/// the dag combiner simplified the 255, we still want to match. RHS is the
/// actual value in the DAG on the RHS of an AND, and DesiredMaskS is the value
/// specified in the .td file (e.g. 255).
bool SelectionDAGISel::CheckAndMask(SDOperand LHS, ConstantSDNode *RHS,
int64_t DesiredMaskS) const {
uint64_t ActualMask = RHS->getValue();
uint64_t DesiredMask =DesiredMaskS & MVT::getIntVTBitMask(LHS.getValueType());
// If the actual mask exactly matches, success!
if (ActualMask == DesiredMask)
return true;
// If the actual AND mask is allowing unallowed bits, this doesn't match.
if (ActualMask & ~DesiredMask)
return false;
// Otherwise, the DAG Combiner may have proven that the value coming in is
// either already zero or is not demanded. Check for known zero input bits.
uint64_t NeededMask = DesiredMask & ~ActualMask;
if (CurDAG->MaskedValueIsZero(LHS, NeededMask))
return true;
// TODO: check to see if missing bits are just not demanded.
// Otherwise, this pattern doesn't match.
return false;
}
/// CheckOrMask - The isel is trying to match something like (or X, 255). If
/// the dag combiner simplified the 255, we still want to match. RHS is the
/// actual value in the DAG on the RHS of an OR, and DesiredMaskS is the value
/// specified in the .td file (e.g. 255).
bool SelectionDAGISel::CheckOrMask(SDOperand LHS, ConstantSDNode *RHS,
int64_t DesiredMaskS) const {
uint64_t ActualMask = RHS->getValue();
uint64_t DesiredMask =DesiredMaskS & MVT::getIntVTBitMask(LHS.getValueType());
// If the actual mask exactly matches, success!
if (ActualMask == DesiredMask)
return true;
// If the actual AND mask is allowing unallowed bits, this doesn't match.
if (ActualMask & ~DesiredMask)
return false;
// Otherwise, the DAG Combiner may have proven that the value coming in is
// either already zero or is not demanded. Check for known zero input bits.
uint64_t NeededMask = DesiredMask & ~ActualMask;
uint64_t KnownZero, KnownOne;
CurDAG->ComputeMaskedBits(LHS, NeededMask, KnownZero, KnownOne);
// If all the missing bits in the or are already known to be set, match!
if ((NeededMask & KnownOne) == NeededMask)
return true;
// TODO: check to see if missing bits are just not demanded.
// Otherwise, this pattern doesn't match.
return false;
}
/// SelectInlineAsmMemoryOperands - Calls to this are automatically generated
/// by tblgen. Others should not call it.
void SelectionDAGISel::
SelectInlineAsmMemoryOperands(std::vector<SDOperand> &Ops, SelectionDAG &DAG) {
std::vector<SDOperand> InOps;
std::swap(InOps, Ops);
Ops.push_back(InOps[0]); // input chain.
Ops.push_back(InOps[1]); // input asm string.
unsigned i = 2, e = InOps.size();
if (InOps[e-1].getValueType() == MVT::Flag)
--e; // Don't process a flag operand if it is here.
while (i != e) {
unsigned Flags = cast<ConstantSDNode>(InOps[i])->getValue();
if ((Flags & 7) != 4 /*MEM*/) {
// Just skip over this operand, copying the operands verbatim.
Ops.insert(Ops.end(), InOps.begin()+i, InOps.begin()+i+(Flags >> 3) + 1);
i += (Flags >> 3) + 1;
} else {
assert((Flags >> 3) == 1 && "Memory operand with multiple values?");
// Otherwise, this is a memory operand. Ask the target to select it.
std::vector<SDOperand> SelOps;
if (SelectInlineAsmMemoryOperand(InOps[i+1], 'm', SelOps, DAG)) {
cerr << "Could not match memory address. Inline asm failure!\n";
exit(1);
}
// Add this to the output node.
MVT::ValueType IntPtrTy = DAG.getTargetLoweringInfo().getPointerTy();
Ops.push_back(DAG.getTargetConstant(4/*MEM*/ | (SelOps.size() << 3),
IntPtrTy));
Ops.insert(Ops.end(), SelOps.begin(), SelOps.end());
i += 2;
}
}
// Add the flag input back if present.
if (e != InOps.size())
Ops.push_back(InOps.back());
}
char SelectionDAGISel::ID = 0;